Commit ca7d9452 authored by Simon Guinot's avatar Simon Guinot Committed by Jason Cooper

ARM: kirkwood: DT board setup for Network Space Lite v2

This patch adds DT board setup for the LaCie NAS Network Space Lite v2.
This board is derived from the Network Space v2 and a lot of hardware
characteristics are shared.

- CPU: Marvell 88F6192 800Mhz
- SDRAM memory: 128MB DDR2 200Mhz
- 1 SATA port: internal
- Gigabit ethernet: PHY Marvell 88E1318
- Flash memory: SPI NOR 512KB (Macronix MX25L4005A)
- i2c EEPROM: 512 bytes (24C04 type)
- 2 USB2 ports: host and host/device
- 1 push button
- 1 SATA LED (bi-color, blue and red)

Note that the SATA LED is not compatible with the driver leds-ns2. The
LED behaviour ("on", "off" or "SATA activity blink") is controlled via
a single MPP (21).
Signed-off-by: default avatarSimon Guinot <simon.guinot@sequanux.org>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent ecee1e47
......@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
kirkwood-ns2.dtb \
kirkwood-ns2lite.dtb \
kirkwood-ns2max.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb
......
/dts-v1/;
/include/ "kirkwood-ns2-common.dtsi"
/ {
model = "LaCie Network Space Lite v2";
compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
ocp@f1000000 {
sata@80000 {
status = "okay";
nr-ports = <1>;
};
};
gpio-leds {
compatible = "gpio-leds";
blue-sata {
label = "ns2:blue:sata";
gpios = <&gpio0 30 1>;
linux,default-trigger = "default-on";
};
};
};
......@@ -151,6 +151,13 @@ config MACH_NETSPACE_MAX_V2_DT
Say 'Y' here if you want your kernel to support the LaCie
Network Space Max v2 NAS, using Flattened Device Tree.
config MACH_NETSPACE_LITE_V2_DT
bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the LaCie
Network Space Lite v2 NAS, using Flattened Device Tree.
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
......
......@@ -34,3 +34,4 @@ obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o
obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o
......@@ -98,7 +98,8 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("lacie,inetspace_v2") ||
of_machine_is_compatible("lacie,netspace_v2") ||
of_machine_is_compatible("lacie,netspace_max_v2"))
of_machine_is_compatible("lacie,netspace_max_v2") ||
of_machine_is_compatible("lacie,netspace_lite_v2"))
ns2_init();
of_platform_populate(NULL, kirkwood_dt_match_table,
......@@ -120,6 +121,7 @@ static const char *kirkwood_dt_board_compat[] = {
"lacie,inetspace_v2",
"lacie,netspace_max_v2",
"lacie,netspace_v2",
"lacie,netspace_lite_v2",
NULL
};
......
......@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include "common.h"
#include "mpp.h"
......@@ -73,6 +74,8 @@ void __init ns2_init(void)
kirkwood_mpp_conf(ns2_mpp_config);
kirkwood_ehci_init();
if (of_machine_is_compatible("lacie,netspace_lite_v2"))
ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&ns2_ge00_data);
if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 &&
......
......@@ -114,7 +114,8 @@ static inline void km_kirkwood_init(void) {};
#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
defined(CONFIG_MACH_NETSPACE_V2_DT) || \
defined(CONFIG_MACH_NETSPACE_MAX_V2_DT)
defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \
defined(CONFIG_MACH_NETSPACE_LITE_V2_DT)
void ns2_init(void);
#else
static inline void ns2_init(void) {};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment