Merge tag 'davinci-for-v4.7/dt' of...

Merge tag 'davinci-for-v4.7/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt

Merge "Device-Tree updates for DaVinci" from Sekhar Nori:

This contains some clean-up and fixes of device-tree data and addition
of i2c1 node for DA850.

* tag 'davinci-for-v4.7/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for i2c1
  ARM: DTS: da850: add node for i2c1
  ARM: dts: davinci: use proper address after @
  ARM: DTS: da850: fix missing #gpio-cells in gpio node

arch/arm/boot/dts/da850-enbw-cmc.dts

@@ -16,14 +16,14 @@ / {
 	compatible = "enbw,cmc", "ti,da850";
 	model = "EnBW CMC";
 
-	soc {
-		serial0: serial@1c42000 {
+	soc@1c00000 {
+		serial0: serial@42000 {
 			status = "okay";
 		};
-		serial1: serial@1d0c000 {
+		serial1: serial@10c000 {
 			status = "okay";
 		};
-		serial2: serial@1d0d000 {
+		serial2: serial@10d000 {
 			status = "okay";
 		};
 	};

arch/arm/boot/dts/da850-evm.dts

@@ -14,8 +14,8 @@ / {
 	compatible = "ti,da850-evm", "ti,da850";
 	model = "DA850/AM1808/OMAP-L138 EVM";
 
-	soc {
-		pmx_core: pinmux@1c14120 {
+	soc@1c00000 {
+		pmx_core: pinmux@14120 {
 			status = "okay";
 
 			mcasp0_pins: pinmux_mcasp0_pins {
@@ -30,19 +30,19 @@ mcasp0_pins: pinmux_mcasp0_pins {
 				>;
 			};
 		};
-		serial0: serial@1c42000 {
+		serial0: serial@42000 {
 			status = "okay";
 		};
-		serial1: serial@1d0c000 {
+		serial1: serial@10c000 {
 			status = "okay";
 		};
-		serial2: serial@1d0d000 {
+		serial2: serial@10d000 {
 			status = "okay";
 		};
-		rtc0: rtc@1c23000 {
+		rtc0: rtc@23000 {
 			status = "okay";
 		};
-		i2c0: i2c@1c22000 {
+		i2c0: i2c@22000 {
 			status = "okay";
 			clock-frequency = <100000>;
 			pinctrl-names = "default";
@@ -66,17 +66,17 @@ tlv320aic3106: tlv320aic3106@18 {
 			};
 
 		};
-		wdt: wdt@1c21000 {
+		wdt: wdt@21000 {
 			status = "okay";
 		};
-		mmc0: mmc@1c40000 {
+		mmc0: mmc@40000 {
 			max-frequency = <50000000>;
 			bus-width = <4>;
 			status = "okay";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins>;
 		};
-		spi1: spi@1f0e000 {
+		spi1: spi@30e000 {
 			status = "okay";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
@@ -116,18 +116,18 @@ partition@5 {
 				};
 			};
 		};
-		mdio: mdio@1e24000 {
+		mdio: mdio@224000 {
 			status = "okay";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mdio_pins>;
 			bus_freq = <2200000>;
 		};
-		eth0: ethernet@1e20000 {
+		eth0: ethernet@220000 {
 			status = "okay";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mii_pins>;
 		};
-		gpio: gpio@1e26000 {
+		gpio: gpio@226000 {
 			status = "okay";
 		};
 	};

arch/arm/boot/dts/da850.dtsi

@@ -15,7 +15,7 @@ arm {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		intc: interrupt-controller {
+		intc: interrupt-controller@fffee000 {
 			compatible = "ti,cp-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -23,7 +23,7 @@ intc: interrupt-controller {
 			reg = <0xfffee000 0x2000>;
 		};
 	};
-	soc {
+	soc@1c00000 {
 		compatible = "simple-bus";
 		model = "da850";
 		#address-cells = <1>;
@@ -31,7 +31,7 @@ soc {
 		ranges = <0x0 0x01c00000 0x400000>;
 		interrupt-parent = <&intc>;
 
-		pmx_core: pinmux@1c14120 {
+		pmx_core: pinmux@14120 {
 			compatible = "pinctrl-single";
 			reg = <0x14120 0x50>;
 			#address-cells = <1>;
@@ -63,6 +63,12 @@ i2c0_pins: pinmux_i2c0_pins {
 					0x10 0x00002200 0x0000ff00
 				>;
 			};
+			i2c1_pins: pinmux_i2c1_pins {
+				pinctrl-single,bits = <
+					/* I2C1_SDA, I2C1_SCL */
+					0x10 0x00440000 0x00ff0000
+				>;
+			};
 			mmc0_pins: pinmux_mmc_pins {
 				pinctrl-single,bits = <
 					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
@@ -150,7 +156,7 @@ mii_pins: pinmux_mii_pins {
 			};
 
 		};
-		edma0: edma@01c00000 {
+		edma0: edma@0 {
 			compatible = "ti,edma3-tpcc";
 			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
 			reg =	<0x0 0x8000>;
@@ -161,19 +167,19 @@ edma0: edma@01c00000 {
 
 			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
 		};
-		edma0_tptc0: tptc@01c08000 {
+		edma0_tptc0: tptc@8000 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x8000 0x400>;
 			interrupts = <13>;
 			interrupt-names = "edm3_tcerrint";
 		};
-		edma0_tptc1: tptc@01c08400 {
+		edma0_tptc1: tptc@8400 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x8400 0x400>;
 			interrupts = <32>;
 			interrupt-names = "edm3_tcerrint";
 		};
-		edma1: edma@01e30000 {
+		edma1: edma@230000 {
 			compatible = "ti,edma3-tpcc";
 			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
 			reg =	<0x230000 0x8000>;
@@ -184,41 +190,41 @@ edma1: edma@01e30000 {
 
 			ti,tptcs = <&edma1_tptc0 7>;
 		};
-		edma1_tptc0: tptc@01e38000 {
+		edma1_tptc0: tptc@238000 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x238000 0x400>;
 			interrupts = <95>;
 			interrupt-names = "edm3_tcerrint";
 		};
-		serial0: serial@1c42000 {
+		serial0: serial@42000 {
 			compatible = "ns16550a";
 			reg = <0x42000 0x100>;
 			reg-shift = <2>;
 			interrupts = <25>;
 			status = "disabled";
 		};
-		serial1: serial@1d0c000 {
+		serial1: serial@10c000 {
 			compatible = "ns16550a";
 			reg = <0x10c000 0x100>;
 			reg-shift = <2>;
 			interrupts = <53>;
 			status = "disabled";
 		};
-		serial2: serial@1d0d000 {
+		serial2: serial@10d000 {
 			compatible = "ns16550a";
 			reg = <0x10d000 0x100>;
 			reg-shift = <2>;
 			interrupts = <61>;
 			status = "disabled";
 		};
-		rtc0: rtc@1c23000 {
+		rtc0: rtc@23000 {
 			compatible = "ti,da830-rtc";
 			reg = <0x23000 0x1000>;
 			interrupts = <19
 				      19>;
 			status = "disabled";
 		};
-		i2c0: i2c@1c22000 {
+		i2c0: i2c@22000 {
 			compatible = "ti,davinci-i2c";
 			reg = <0x22000 0x1000>;
 			interrupts = <15>;
@@ -226,12 +232,20 @@ i2c0: i2c@1c22000 {
 			#size-cells = <0>;
 			status = "disabled";
 		};
-		wdt: wdt@1c21000 {
+		i2c1: i2c@228000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x228000 0x1000>;
+			interrupts = <51>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		wdt: wdt@21000 {
 			compatible = "ti,davinci-wdt";
 			reg = <0x21000 0x1000>;
 			status = "disabled";
 		};
-		mmc0: mmc@1c40000 {
+		mmc0: mmc@40000 {
 			compatible = "ti,da830-mmc";
 			reg = <0x40000 0x1000>;
 			interrupts = <16>;
@@ -239,7 +253,7 @@ mmc0: mmc@1c40000 {
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
-		mmc1: mmc@1e1b000 {
+		mmc1: mmc@21b000 {
 			compatible = "ti,da830-mmc";
 			reg = <0x21b000 0x1000>;
 			interrupts = <72>;
@@ -247,37 +261,37 @@ mmc1: mmc@1e1b000 {
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
-		ehrpwm0: ehrpwm@01f00000 {
+		ehrpwm0: ehrpwm@300000 {
 			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x300000 0x2000>;
 			status = "disabled";
 		};
-		ehrpwm1: ehrpwm@01f02000 {
+		ehrpwm1: ehrpwm@302000 {
 			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x302000 0x2000>;
 			status = "disabled";
 		};
-		ecap0: ecap@01f06000 {
+		ecap0: ecap@306000 {
 			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x306000 0x80>;
 			status = "disabled";
 		};
-		ecap1: ecap@01f07000 {
+		ecap1: ecap@307000 {
 			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x307000 0x80>;
 			status = "disabled";
 		};
-		ecap2: ecap@01f08000 {
+		ecap2: ecap@308000 {
 			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x308000 0x80>;
 			status = "disabled";
 		};
-		spi1: spi@1f0e000 {
+		spi1: spi@30e000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "ti,da830-spi";
@@ -289,13 +303,13 @@ spi1: spi@1f0e000 {
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
-		mdio: mdio@1e24000 {
+		mdio: mdio@224000 {
 			compatible = "ti,davinci_mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x224000 0x1000>;
 		};
-		eth0: ethernet@1e20000 {
+		eth0: ethernet@220000 {
 			compatible = "ti,davinci-dm6467-emac";
 			reg = <0x220000 0x4000>;
 			ti,davinci-ctrl-reg-offset = <0x3000>;
@@ -309,9 +323,10 @@ eth0: ethernet@1e20000 {
 					36
 					>;
 		};
-		gpio: gpio@1e26000 {
+		gpio: gpio@226000 {
 			compatible = "ti,dm6441-gpio";
 			gpio-controller;
+			#gpio-cells = <2>;
 			reg = <0x226000 0x1000>;
 			interrupts = <42 IRQ_TYPE_EDGE_BOTH
 				43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
@@ -323,7 +338,7 @@ gpio: gpio@1e26000 {
 			status = "disabled";
 		};
 
-		mcasp0: mcasp@01d00000 {
+		mcasp0: mcasp@100000 {
 			compatible = "ti,da830-mcasp-audio";
 			reg = <0x100000 0x2000>,
 			      <0x102000 0x400000>;

arch/arm/mach-davinci/da8xx-dt.c

@@ -32,6 +32,7 @@ static void __init da8xx_init_irq(void)
 
 static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
+	OF_DEV_AUXDATA("ti,davinci-i2c", 0x01e28000, "i2c_davinci.2", NULL),
 	OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "davinci-wdt", NULL),
 	OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL),
 	OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm", NULL),