Skip to content

L
linux
Commit cb3bc9d0 authored by Gavin Shan's avatar Gavin Shan Committed by Benjamin Herrenschmidt
Browse files
Options

powerpc/eeh: Cleanup comments in the EEH core 

The EEH has been implemented on pSeries platform. The original
code looks a little bit nasty. The patch does cleanup on the
current EEH implementation so that it looks more clean.

        * Duplicated comments have been removed from the corresponding
          header files.
        * Comments have been reorganized so that it looks more clean.
        * The leading comments of functions are adjusted for a little
          bit so that the result of "make pdfdocs" would be more
          unified.
        * Function definitions and calls have unified format as "xxx()".
          That means the format "xxx ()" has been replaced by "xxx()".
        * There're multiple functions implemented for resetting PE. The
          position of those functions have been move around so that they
          are adjacent to each other to reflect their relationship.
Signed-off-by: default avatarGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent b0787660
Show whitespace changes
Inline Side-by-side
Showing with 276 additions and 221 deletions
arch/powerpc/include/asm/eeh.h
View file @ cb3bc9d0
/* /*
* eeh.h
* Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation. * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation.
* Copyright 2001-2012 IBM Corporation.
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
...@@ -40,8 +40,10 @@ extern int eeh_subsystem_enabled; ...@@ -40,8 +40,10 @@ extern int eeh_subsystem_enabled;
#define EEH_MODE_RECOVERING (1<<3) #define EEH_MODE_RECOVERING (1<<3)
#define EEH_MODE_IRQ_DISABLED (1<<4) #define EEH_MODE_IRQ_DISABLED (1<<4)
/* Max number of EEH freezes allowed before we consider the device /*
* to be permanently disabled. */ * Max number of EEH freezes allowed before we consider the device
* to be permanently disabled.
*/
#define EEH_MAX_ALLOWED_FREEZES 5 #define EEH_MAX_ALLOWED_FREEZES 5
void __init eeh_init(void); void __init eeh_init(void);
...@@ -49,26 +51,8 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, ...@@ -49,26 +51,8 @@ unsigned long eeh_check_failure(const volatile void __iomem *token,
unsigned long val); unsigned long val);
int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev); int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev);
void __init pci_addr_cache_build(void); void __init pci_addr_cache_build(void);
/**
* eeh_add_device_early
* eeh_add_device_late
*
* Perform eeh initialization for devices added after boot.
* Call eeh_add_device_early before doing any i/o to the
* device (including config space i/o). Call eeh_add_device_late
* to finish the eeh setup for this device.
*/
void eeh_add_device_tree_early(struct device_node *); void eeh_add_device_tree_early(struct device_node *);
void eeh_add_device_tree_late(struct pci_bus *); void eeh_add_device_tree_late(struct pci_bus *);
/**
* eeh_remove_device_recursive - undo EEH for device & children.
* @dev: pci device to be removed
*
* As above, this removes the device; it also removes child
* pci devices as well.
*/
void eeh_remove_bus_device(struct pci_dev *); void eeh_remove_bus_device(struct pci_dev *);
/** /**
......
arch/powerpc/include/asm/ppc-pci.h
View file @ cb3bc9d0
...@@ -47,92 +47,27 @@ extern int rtas_setup_phb(struct pci_controller *phb); ...@@ -47,92 +47,27 @@ extern int rtas_setup_phb(struct pci_controller *phb);
extern unsigned long pci_probe_only; extern unsigned long pci_probe_only;
/* ---- EEH internal-use-only related routines ---- */
#ifdef CONFIG_EEH #ifdef CONFIG_EEH
void pci_addr_cache_insert_device(struct pci_dev *dev); void pci_addr_cache_insert_device(struct pci_dev *dev);
void pci_addr_cache_remove_device(struct pci_dev *dev); void pci_addr_cache_remove_device(struct pci_dev *dev);
void pci_addr_cache_build(void); void pci_addr_cache_build(void);
struct pci_dev *pci_get_device_by_addr(unsigned long addr); struct pci_dev *pci_get_device_by_addr(unsigned long addr);
/**
* eeh_slot_error_detail -- record and EEH error condition to the log
* @pdn: pci device node
* @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE
*
* Obtains the EEH error details from the RTAS subsystem,
* and then logs these details with the RTAS error log system.
*/
#define EEH_LOG_TEMP_FAILURE 1 #define EEH_LOG_TEMP_FAILURE 1
#define EEH_LOG_PERM_FAILURE 2 #define EEH_LOG_PERM_FAILURE 2
void eeh_slot_error_detail (struct pci_dn *pdn, int severity); void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
/**
* rtas_pci_enable - enable IO transfers for this slot
* @pdn: pci device node
* @function: either EEH_THAW_MMIO or EEH_THAW_DMA
*
* Enable I/O transfers to this slot
*/
#define EEH_THAW_MMIO 2 #define EEH_THAW_MMIO 2
#define EEH_THAW_DMA 3 #define EEH_THAW_DMA 3
int rtas_pci_enable(struct pci_dn *pdn, int function); int rtas_pci_enable(struct pci_dn *pdn, int function);
/**
* rtas_set_slot_reset -- unfreeze a frozen slot
* @pdn: pci device node
*
* Clear the EEH-frozen condition on a slot. This routine
* does this by asserting the PCI #RST line for 1/8th of
* a second; this routine will sleep while the adapter is
* being reset.
*
* Returns a non-zero value if the reset failed.
*/
int rtas_set_slot_reset (struct pci_dn *); int rtas_set_slot_reset (struct pci_dn *);
int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs); int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs);
/**
* eeh_restore_bars - Restore device configuration info.
* @pdn: pci device node
*
* A reset of a PCI device will clear out its config space.
* This routines will restore the config space for this
* device, and is children, to values previously obtained
* from the firmware.
*/
void eeh_restore_bars(struct pci_dn *); void eeh_restore_bars(struct pci_dn *);
/**
* rtas_configure_bridge -- firmware initialization of pci bridge
* @pdn: pci device node
*
* Ask the firmware to configure all PCI bridges devices
* located behind the indicated node. Required after a
* pci device reset. Does essentially the same hing as
* eeh_restore_bars, but for brdges, and lets firmware
* do the work.
*/
void rtas_configure_bridge(struct pci_dn *); void rtas_configure_bridge(struct pci_dn *);
int rtas_write_config(struct pci_dn *, int where, int size, u32 val); int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
int rtas_read_config(struct pci_dn *, int where, int size, u32 *val); int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
void eeh_mark_slot(struct device_node *dn, int mode_flag);
/** void eeh_clear_slot(struct device_node *dn, int mode_flag);
* eeh_mark_slot -- set mode flags for pertition endpoint struct device_node *find_device_pe(struct device_node *dn);
* @pdn: pci device node
*
* mark and clear slots: find "partition endpoint" PE and set or
* clear the flags for each subnode of the PE.
*/
void eeh_mark_slot (struct device_node *dn, int mode_flag);
void eeh_clear_slot (struct device_node *dn, int mode_flag);
/**
* find_device_pe -- Find the associated "Partiationable Endpoint" PE
* @pdn: pci device node
*/
struct device_node * find_device_pe(struct device_node *dn);
void eeh_sysfs_add_device(struct pci_dev *pdev); void eeh_sysfs_add_device(struct pci_dev *pdev);
void eeh_sysfs_remove_device(struct pci_dev *pdev); void eeh_sysfs_remove_device(struct pci_dev *pdev);
......
arch/powerpc/platforms/pseries/eeh.c
View file @ cb3bc9d0
/* /*
* eeh.c
* Copyright IBM Corporation 2001, 2005, 2006 * Copyright IBM Corporation 2001, 2005, 2006
* Copyright Dave Engebretsen & Todd Inglett 2001 * Copyright Dave Engebretsen & Todd Inglett 2001
* Copyright Linas Vepstas 2005, 2006 * Copyright Linas Vepstas 2005, 2006
* Copyright 2001-2012 IBM Corporation.
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
...@@ -22,7 +22,7 @@ ...@@ -22,7 +22,7 @@
*/ */
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/sched.h> /* for init_mm */ #include <linux/sched.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/list.h> #include <linux/list.h>
#include <linux/pci.h> #include <linux/pci.h>
...@@ -129,9 +129,16 @@ static unsigned long slot_resets; ...@@ -129,9 +129,16 @@ static unsigned long slot_resets;
#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE) #define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE)
/* --------------------------------------------------------------- */ /**
/* Below lies the EEH event infrastructure */ * rtas_slot_error_detail - Retrieve error log through RTAS call
* @pdn: device node
* @severity: temporary or permanent error log
* @driver_log: driver log to be combined with the retrieved error log
* @loglen: length of driver log
*
* This routine should be called to retrieve error log through the dedicated
* RTAS call.
*/
static void rtas_slot_error_detail(struct pci_dn *pdn, int severity, static void rtas_slot_error_detail(struct pci_dn *pdn, int severity,
char *driver_log, size_t loglen) char *driver_log, size_t loglen)
{ {
...@@ -163,7 +170,7 @@ static void rtas_slot_error_detail(struct pci_dn *pdn, int severity, ...@@ -163,7 +170,7 @@ static void rtas_slot_error_detail(struct pci_dn *pdn, int severity,
} }
/** /**
* gather_pci_data - copy assorted PCI config space registers to buff * gather_pci_data - Copy assorted PCI config space registers to buff
* @pdn: device to report data for * @pdn: device to report data for
* @buf: point to buffer in which to log * @buf: point to buffer in which to log
* @len: amount of room in buffer * @len: amount of room in buffer
...@@ -258,6 +265,16 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) ...@@ -258,6 +265,16 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
return n; return n;
} }
/**
* eeh_slot_error_detail - Generate combined log including driver log and error log
* @pdn: device node
* @severity: temporary or permanent error log
*
* This routine should be called to generate the combined log, which
* is comprised of driver log and error log. The driver log is figured
* out from the config space of the corresponding PCI device, while
* the error log is fetched through platform dependent function call.
*/
void eeh_slot_error_detail(struct pci_dn *pdn, int severity) void eeh_slot_error_detail(struct pci_dn *pdn, int severity)
{ {
size_t loglen = 0; size_t loglen = 0;
...@@ -275,6 +292,9 @@ void eeh_slot_error_detail(struct pci_dn *pdn, int severity) ...@@ -275,6 +292,9 @@ void eeh_slot_error_detail(struct pci_dn *pdn, int severity)
* read_slot_reset_state - Read the reset state of a device node's slot * read_slot_reset_state - Read the reset state of a device node's slot
* @dn: device node to read * @dn: device node to read
* @rets: array to return results in * @rets: array to return results in
*
* Read the reset state of a device node's slot through platform dependent
* function call.
*/ */
static int read_slot_reset_state(struct pci_dn *pdn, int rets[]) static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
{ {
...@@ -300,9 +320,9 @@ static int read_slot_reset_state(struct pci_dn *pdn, int rets[]) ...@@ -300,9 +320,9 @@ static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
} }
/** /**
* eeh_wait_for_slot_status - returns error status of slot * eeh_wait_for_slot_status - Returns error status of slot
* @pdn pci device node * @pdn: pci device node
* @max_wait_msecs maximum number to millisecs to wait * @max_wait_msecs: maximum number to millisecs to wait
* *
* Return negative value if a permanent error, else return * Return negative value if a permanent error, else return
* Partition Endpoint (PE) status value. * Partition Endpoint (PE) status value.
...@@ -332,16 +352,16 @@ eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs) ...@@ -332,16 +352,16 @@ eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs)
mwait = rets[2]; mwait = rets[2];
if (mwait <= 0) { if (mwait <= 0) {
printk (KERN_WARNING printk(KERN_WARNING "EEH: Firmware returned bad wait value=%d\n",
"EEH: Firmware returned bad wait value=%d\n", mwait); mwait);
mwait = 1000; mwait = 1000;
} else if (mwait > 300*1000) { } else if (mwait > 300*1000) {
printk (KERN_WARNING printk(KERN_WARNING "EEH: Firmware is taking too long, time=%d\n",
"EEH: Firmware is taking too long, time=%d\n", mwait); mwait);
mwait = 300*1000; mwait = 300*1000;
} }
max_wait_msecs -= mwait; max_wait_msecs -= mwait;
msleep (mwait); msleep(mwait);
} }
printk(KERN_WARNING "EEH: Timed out waiting for slot status\n"); printk(KERN_WARNING "EEH: Timed out waiting for slot status\n");
...@@ -349,8 +369,11 @@ eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs) ...@@ -349,8 +369,11 @@ eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs)
} }
/** /**
* eeh_token_to_phys - convert EEH address token to phys address * eeh_token_to_phys - Convert EEH address token to phys address
* @token i/o token, should be address in the form 0xA.... * @token: I/O token, should be address in the form 0xA....
*
* This routine should be called to convert virtual I/O address
* to physical one.
*/ */
static inline unsigned long eeh_token_to_phys(unsigned long token) static inline unsigned long eeh_token_to_phys(unsigned long token)
{ {
...@@ -366,7 +389,10 @@ static inline unsigned long eeh_token_to_phys(unsigned long token) ...@@ -366,7 +389,10 @@ static inline unsigned long eeh_token_to_phys(unsigned long token)
} }
/** /**
* Return the "partitionable endpoint" (pe) under which this device lies * find_device_pe - Retrieve the PE for the given device
* @dn: device node
*
* Return the PE under which this device lies
*/ */
struct device_node * find_device_pe(struct device_node *dn) struct device_node * find_device_pe(struct device_node *dn)
{ {
...@@ -377,14 +403,18 @@ struct device_node * find_device_pe(struct device_node *dn) ...@@ -377,14 +403,18 @@ struct device_node * find_device_pe(struct device_node *dn)
return dn; return dn;
} }
/** Mark all devices that are children of this device as failed. /**
* __eeh_mark_slot - Mark all child devices as failed
* @parent: parent device
* @mode_flag: failure flag
*
* Mark all devices that are children of this device as failed.
* Mark the device driver too, so that it can see the failure * Mark the device driver too, so that it can see the failure
* immediately; this is critical, since some drivers poll * immediately; this is critical, since some drivers poll
* status registers in interrupts ... If a driver is polling, * status registers in interrupts ... If a driver is polling,
* and the slot is frozen, then the driver can deadlock in * and the slot is frozen, then the driver can deadlock in
* an interrupt context, which is bad. * an interrupt context, which is bad.
*/ */
static void __eeh_mark_slot(struct device_node *parent, int mode_flag) static void __eeh_mark_slot(struct device_node *parent, int mode_flag)
{ {
struct device_node *dn; struct device_node *dn;
...@@ -404,10 +434,18 @@ static void __eeh_mark_slot(struct device_node *parent, int mode_flag) ...@@ -404,10 +434,18 @@ static void __eeh_mark_slot(struct device_node *parent, int mode_flag)
} }
} }
void eeh_mark_slot (struct device_node *dn, int mode_flag) /**
* eeh_mark_slot - Mark the indicated device and its children as failed
* @dn: parent device
* @mode_flag: failure flag
*
* Mark the indicated device and its child devices as failed.
* The device drivers are marked as failed as well.
*/
void eeh_mark_slot(struct device_node *dn, int mode_flag)
{ {
struct pci_dev *dev; struct pci_dev *dev;
dn = find_device_pe (dn); dn = find_device_pe(dn);
/* Back up one, since config addrs might be shared */ /* Back up one, since config addrs might be shared */
if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent)) if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
...@@ -423,6 +461,13 @@ void eeh_mark_slot (struct device_node *dn, int mode_flag) ...@@ -423,6 +461,13 @@ void eeh_mark_slot (struct device_node *dn, int mode_flag)
__eeh_mark_slot(dn, mode_flag); __eeh_mark_slot(dn, mode_flag);
} }
/**
* __eeh_clear_slot - Clear failure flag for the child devices
* @parent: parent device
* @mode_flag: flag to be cleared
*
* Clear failure flag for the child devices.
*/
static void __eeh_clear_slot(struct device_node *parent, int mode_flag) static void __eeh_clear_slot(struct device_node *parent, int mode_flag)
{ {
struct device_node *dn; struct device_node *dn;
...@@ -436,12 +481,19 @@ static void __eeh_clear_slot(struct device_node *parent, int mode_flag) ...@@ -436,12 +481,19 @@ static void __eeh_clear_slot(struct device_node *parent, int mode_flag)
} }
} }
void eeh_clear_slot (struct device_node *dn, int mode_flag) /**
* eeh_clear_slot - Clear failure flag for the indicated device and its children
* @dn: parent device
* @mode_flag: flag to be cleared
*
* Clear failure flag for the indicated device and its children.
*/
void eeh_clear_slot(struct device_node *dn, int mode_flag)
{ {
unsigned long flags; unsigned long flags;
raw_spin_lock_irqsave(&confirm_error_lock, flags); raw_spin_lock_irqsave(&confirm_error_lock, flags);
dn = find_device_pe (dn); dn = find_device_pe(dn);
/* Back up one, since config addrs might be shared */ /* Back up one, since config addrs might be shared */
if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent)) if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
...@@ -453,43 +505,10 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag) ...@@ -453,43 +505,10 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag)
raw_spin_unlock_irqrestore(&confirm_error_lock, flags); raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
} }
void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset)
{
struct device_node *dn;
for_each_child_of_node(parent, dn) {
if (PCI_DN(dn)) {
struct pci_dev *dev = PCI_DN(dn)->pcidev;
if (dev && dev->driver)
*freset |= dev->needs_freset;
__eeh_set_pe_freset(dn, freset);
}
}
}
void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset)
{
struct pci_dev *dev;
dn = find_device_pe(dn);
/* Back up one, since config addrs might be shared */
if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
dn = dn->parent;
dev = PCI_DN(dn)->pcidev;
if (dev)
*freset |= dev->needs_freset;
__eeh_set_pe_freset(dn, freset);
}
/** /**
* eeh_dn_check_failure - check if all 1's data is due to EEH slot freeze * eeh_dn_check_failure - Check if all 1's data is due to EEH slot freeze
* @dn device node * @dn: device node
* @dev pci device, if known * @dev: pci device, if known
* *
* Check for an EEH failure for the given device node. Call this * Check for an EEH failure for the given device node. Call this
* routine if the result of a read was all 0xff's and you want to * routine if the result of a read was all 0xff's and you want to
...@@ -548,11 +567,11 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) ...@@ -548,11 +567,11 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
pdn->eeh_check_count ++; pdn->eeh_check_count ++;
if (pdn->eeh_check_count % EEH_MAX_FAILS == 0) { if (pdn->eeh_check_count % EEH_MAX_FAILS == 0) {
location = of_get_property(dn, "ibm,loc-code", NULL); location = of_get_property(dn, "ibm,loc-code", NULL);
printk (KERN_ERR "EEH: %d reads ignored for recovering device at " printk(KERN_ERR "EEH: %d reads ignored for recovering device at "
"location=%s driver=%s pci addr=%s\n", "location=%s driver=%s pci addr=%s\n",
pdn->eeh_check_count, location, pdn->eeh_check_count, location,
eeh_driver_name(dev), eeh_pci_name(dev)); eeh_driver_name(dev), eeh_pci_name(dev));
printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n", printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n",
eeh_driver_name(dev)); eeh_driver_name(dev));
dump_stack(); dump_stack();
} }
...@@ -579,7 +598,8 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) ...@@ -579,7 +598,8 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
} }
/* Note that config-io to empty slots may fail; /* Note that config-io to empty slots may fail;
* they are empty when they don't have children. */ * they are empty when they don't have children.
*/
if ((rets[0] == 5) && (rets[2] == 0) && (dn->child == NULL)) { if ((rets[0] == 5) && (rets[2] == 0) && (dn->child == NULL)) {
false_positives++; false_positives++;
pdn->eeh_false_positives ++; pdn->eeh_false_positives ++;
...@@ -609,15 +629,17 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) ...@@ -609,15 +629,17 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
/* Avoid repeated reports of this failure, including problems /* Avoid repeated reports of this failure, including problems
* with other functions on this device, and functions under * with other functions on this device, and functions under
* bridges. */ * bridges.
eeh_mark_slot (dn, EEH_MODE_ISOLATED); */
eeh_mark_slot(dn, EEH_MODE_ISOLATED);
raw_spin_unlock_irqrestore(&confirm_error_lock, flags); raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
eeh_send_failure_event (dn, dev); eeh_send_failure_event(dn, dev);
/* Most EEH events are due to device driver bugs. Having /* Most EEH events are due to device driver bugs. Having
* a stack trace will help the device-driver authors figure * a stack trace will help the device-driver authors figure
* out what happened. So print that out. */ * out what happened. So print that out.
*/
dump_stack(); dump_stack();
return 1; return 1;
...@@ -629,9 +651,9 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) ...@@ -629,9 +651,9 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
EXPORT_SYMBOL_GPL(eeh_dn_check_failure); EXPORT_SYMBOL_GPL(eeh_dn_check_failure);
/** /**
* eeh_check_failure - check if all 1's data is due to EEH slot freeze * eeh_check_failure - Check if all 1's data is due to EEH slot freeze
* @token i/o token, should be address in the form 0xA.... * @token: I/O token, should be address in the form 0xA....
* @val value, should be all 1's (XXX why do we need this arg??) * @val: value, should be all 1's (XXX why do we need this arg??)
* *
* Check for an EEH failure at the given token address. Call this * Check for an EEH failure at the given token address. Call this
* routine if the result of a read was all 0xff's and you want to * routine if the result of a read was all 0xff's and you want to
...@@ -655,7 +677,7 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon ...@@ -655,7 +677,7 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
} }
dn = pci_device_to_OF_node(dev); dn = pci_device_to_OF_node(dev);
eeh_dn_check_failure (dn, dev); eeh_dn_check_failure(dn, dev);
pci_dev_put(dev); pci_dev_put(dev);
return val; return val;
...@@ -663,14 +685,15 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon ...@@ -663,14 +685,15 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
EXPORT_SYMBOL(eeh_check_failure); EXPORT_SYMBOL(eeh_check_failure);
/* ------------------------------------------------------------- */
/* The code below deals with error recovery */
/** /**
* rtas_pci_enable - enable MMIO or DMA transfers for this slot * rtas_pci_enable - Enable MMIO or DMA transfers for this slot
* @pdn pci device node * @pdn pci device node
*
* This routine should be called to reenable frozen MMIO or DMA
* so that it would work correctly again. It's useful while doing
* recovery or log collection on the indicated device.
*/ */
int int
rtas_pci_enable(struct pci_dn *pdn, int function) rtas_pci_enable(struct pci_dn *pdn, int function)
{ {
...@@ -692,7 +715,7 @@ rtas_pci_enable(struct pci_dn *pdn, int function) ...@@ -692,7 +715,7 @@ rtas_pci_enable(struct pci_dn *pdn, int function)
printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n", printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n",
function, rc, pdn->node->full_name); function, rc, pdn->node->full_name);
rc = eeh_wait_for_slot_status (pdn, PCI_BUS_RESET_WAIT_MSEC); rc = eeh_wait_for_slot_status(pdn, PCI_BUS_RESET_WAIT_MSEC);
if ((rc == 4) && (function == EEH_THAW_MMIO)) if ((rc == 4) && (function == EEH_THAW_MMIO))
return 0; return 0;
...@@ -700,27 +723,25 @@ rtas_pci_enable(struct pci_dn *pdn, int function) ...@@ -700,27 +723,25 @@ rtas_pci_enable(struct pci_dn *pdn, int function)
} }
/** /**
* rtas_pci_slot_reset - raises/lowers the pci #RST line * rtas_pci_slot_reset - Raises/Lowers the pci #RST line
* @pdn pci device node * @pdn: pci device node
* @state: 1/0 to raise/lower the #RST * @state: 1/0 to raise/lower the #RST
* *
* Clear the EEH-frozen condition on a slot. This routine * Clear the EEH-frozen condition on a slot. This routine
* asserts the PCI #RST line if the 'state' argument is '1', * asserts the PCI #RST line if the 'state' argument is '1',
* and drops the #RST line if 'state is '0'. This routine is * and drops the #RST line if 'state is '0'. This routine is
* safe to call in an interrupt context. * safe to call in an interrupt context.
*
*/ */
static void static void
rtas_pci_slot_reset(struct pci_dn *pdn, int state) rtas_pci_slot_reset(struct pci_dn *pdn, int state)
{ {
int config_addr; int config_addr;
int rc; int rc;
BUG_ON (pdn==NULL); BUG_ON(pdn==NULL);
if (!pdn->phb) { if (!pdn->phb) {
printk (KERN_WARNING "EEH: in slot reset, device node %s has no phb\n", printk(KERN_WARNING "EEH: in slot reset, device node %s has no phb\n",
pdn->node->full_name); pdn->node->full_name);
return; return;
} }
...@@ -757,7 +778,7 @@ rtas_pci_slot_reset(struct pci_dn *pdn, int state) ...@@ -757,7 +778,7 @@ rtas_pci_slot_reset(struct pci_dn *pdn, int state)
* *
* Return value: * Return value:
* 0 if success * 0 if success
**/ */
int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
{ {
struct device_node *dn = pci_device_to_OF_node(dev); struct device_node *dn = pci_device_to_OF_node(dev);
...@@ -781,10 +802,62 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat ...@@ -781,10 +802,62 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
} }
/** /**
* rtas_set_slot_reset -- assert the pci #RST line for 1/4 second * __eeh_set_pe_freset - Check the required reset for child devices
* @pdn: pci device node to be reset. * @parent: parent device
* @freset: return value
*
* Each device might have its preferred reset type: fundamental or
* hot reset. The routine is used to collect the information from
* the child devices so that they could be reset accordingly.
*/
void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset)
{
struct device_node *dn;
for_each_child_of_node(parent, dn) {
if (PCI_DN(dn)) {
struct pci_dev *dev = PCI_DN(dn)->pcidev;
if (dev && dev->driver)
*freset |= dev->needs_freset;
__eeh_set_pe_freset(dn, freset);
}
}
}
/**
* eeh_set_pe_freset - Check the required reset for the indicated device and its children
* @dn: parent device
* @freset: return value
*
* Each device might have its preferred reset type: fundamental or
* hot reset. The routine is used to collected the information for
* the indicated device and its children so that the bunch of the
* devices could be reset properly.
*/ */
void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset)
{
struct pci_dev *dev;
dn = find_device_pe(dn);
/* Back up one, since config addrs might be shared */
if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
dn = dn->parent;
dev = PCI_DN(dn)->pcidev;
if (dev)
*freset |= dev->needs_freset;
__eeh_set_pe_freset(dn, freset);
}
/**
* __rtas_set_slot_reset - Assert the pci #RST line for 1/4 second
* @pdn: pci device node to be reset.
*
* Assert the PCI #RST line for 1/4 second.
*/
static void __rtas_set_slot_reset(struct pci_dn *pdn) static void __rtas_set_slot_reset(struct pci_dn *pdn)
{ {
unsigned int freset = 0; unsigned int freset = 0;
...@@ -803,25 +876,35 @@ static void __rtas_set_slot_reset(struct pci_dn *pdn) ...@@ -803,25 +876,35 @@ static void __rtas_set_slot_reset(struct pci_dn *pdn)
rtas_pci_slot_reset(pdn, 1); rtas_pci_slot_reset(pdn, 1);
/* The PCI bus requires that the reset be held high for at least /* The PCI bus requires that the reset be held high for at least
* a 100 milliseconds. We wait a bit longer 'just in case'. */ * a 100 milliseconds. We wait a bit longer 'just in case'.
*/
#define PCI_BUS_RST_HOLD_TIME_MSEC 250 #define PCI_BUS_RST_HOLD_TIME_MSEC 250
msleep (PCI_BUS_RST_HOLD_TIME_MSEC); msleep(PCI_BUS_RST_HOLD_TIME_MSEC);
/* We might get hit with another EEH freeze as soon as the /* We might get hit with another EEH freeze as soon as the
* pci slot reset line is dropped. Make sure we don't miss * pci slot reset line is dropped. Make sure we don't miss
* these, and clear the flag now. */ * these, and clear the flag now.
eeh_clear_slot (pdn->node, EEH_MODE_ISOLATED); */
eeh_clear_slot(pdn->node, EEH_MODE_ISOLATED);
rtas_pci_slot_reset (pdn, 0); rtas_pci_slot_reset(pdn, 0);
/* After a PCI slot has been reset, the PCI Express spec requires /* After a PCI slot has been reset, the PCI Express spec requires
* a 1.5 second idle time for the bus to stabilize, before starting * a 1.5 second idle time for the bus to stabilize, before starting
* up traffic. */ * up traffic.
*/
#define PCI_BUS_SETTLE_TIME_MSEC 1800 #define PCI_BUS_SETTLE_TIME_MSEC 1800
msleep (PCI_BUS_SETTLE_TIME_MSEC); msleep(PCI_BUS_SETTLE_TIME_MSEC);
} }
/**
* rtas_set_slot_reset - Reset the indicated PE
* @pdn: PCI device node
*
* This routine should be called to reset indicated device, including
* PE. A PE might include multiple PCI devices and sometimes PCI bridges
* might be involved as well.
*/
int rtas_set_slot_reset(struct pci_dn *pdn) int rtas_set_slot_reset(struct pci_dn *pdn)
{ {
int i, rc; int i, rc;
...@@ -846,7 +929,6 @@ int rtas_set_slot_reset(struct pci_dn *pdn) ...@@ -846,7 +929,6 @@ int rtas_set_slot_reset(struct pci_dn *pdn)
return -1; return -1;
} }
/* ------------------------------------------------------- */
/** Save and restore of PCI BARs /** Save and restore of PCI BARs
* *
* Although firmware will set up BARs during boot, it doesn't * Although firmware will set up BARs during boot, it doesn't
...@@ -863,7 +945,7 @@ int rtas_set_slot_reset(struct pci_dn *pdn) ...@@ -863,7 +945,7 @@ int rtas_set_slot_reset(struct pci_dn *pdn)
* the expansion ROM base address, the latency timer, and etc. * the expansion ROM base address, the latency timer, and etc.
* from the saved values in the device node. * from the saved values in the device node.
*/ */
static inline void __restore_bars (struct pci_dn *pdn) static inline void __restore_bars(struct pci_dn *pdn)
{ {
int i; int i;
u32 cmd; u32 cmd;
...@@ -879,17 +961,18 @@ static inline void __restore_bars (struct pci_dn *pdn) ...@@ -879,17 +961,18 @@ static inline void __restore_bars (struct pci_dn *pdn)
#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF)) #define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
#define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)]) #define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)])
rtas_write_config (pdn, PCI_CACHE_LINE_SIZE, 1, rtas_write_config(pdn, PCI_CACHE_LINE_SIZE, 1,
SAVED_BYTE(PCI_CACHE_LINE_SIZE)); SAVED_BYTE(PCI_CACHE_LINE_SIZE));
rtas_write_config (pdn, PCI_LATENCY_TIMER, 1, rtas_write_config(pdn, PCI_LATENCY_TIMER, 1,
SAVED_BYTE(PCI_LATENCY_TIMER)); SAVED_BYTE(PCI_LATENCY_TIMER));
/* max latency, min grant, interrupt pin and line */ /* max latency, min grant, interrupt pin and line */
rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]); rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]);
/* Restore PERR & SERR bits, some devices require it, /* Restore PERR & SERR bits, some devices require it,
don't touch the other command bits */ * don't touch the other command bits
*/
rtas_read_config(pdn, PCI_COMMAND, 4, &cmd); rtas_read_config(pdn, PCI_COMMAND, 4, &cmd);
if (pdn->config_space[1] & PCI_COMMAND_PARITY) if (pdn->config_space[1] & PCI_COMMAND_PARITY)
cmd |= PCI_COMMAND_PARITY; cmd |= PCI_COMMAND_PARITY;
...@@ -903,7 +986,8 @@ static inline void __restore_bars (struct pci_dn *pdn) ...@@ -903,7 +986,8 @@ static inline void __restore_bars (struct pci_dn *pdn)
} }
/** /**
* eeh_restore_bars - restore the PCI config space info * eeh_restore_bars - Restore the PCI config space info
* @pdn: PCI device node
* *
* This routine performs a recursive walk to the children * This routine performs a recursive walk to the children
* of this device as well. * of this device as well.
...@@ -915,14 +999,15 @@ void eeh_restore_bars(struct pci_dn *pdn) ...@@ -915,14 +999,15 @@ void eeh_restore_bars(struct pci_dn *pdn)
return; return;
if ((pdn->eeh_mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(pdn->class_code)) if ((pdn->eeh_mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(pdn->class_code))
__restore_bars (pdn); __restore_bars(pdn);
for_each_child_of_node(pdn->node, dn) for_each_child_of_node(pdn->node, dn)
eeh_restore_bars (PCI_DN(dn)); eeh_restore_bars(PCI_DN(dn));
} }
/** /**
* eeh_save_bars - save device bars * eeh_save_bars - Save device bars
* @pdn: PCI device node
* *
* Save the values of the device bars. Unlike the restore * Save the values of the device bars. Unlike the restore
* routine, this routine is *not* recursive. This is because * routine, this routine is *not* recursive. This is because
...@@ -940,6 +1025,14 @@ static void eeh_save_bars(struct pci_dn *pdn) ...@@ -940,6 +1025,14 @@ static void eeh_save_bars(struct pci_dn *pdn)
rtas_read_config(pdn, i * 4, 4, &pdn->config_space[i]); rtas_read_config(pdn, i * 4, 4, &pdn->config_space[i]);
} }
/**
* rtas_configure_bridge - Configure PCI bridges for the indicated PE
* @pdn: PCI device node
*
* PCI bridges might be included in PE. In order to make the PE work
* again. The included PCI bridges should be recovered after the PE
* encounters frozen state.
*/
void void
rtas_configure_bridge(struct pci_dn *pdn) rtas_configure_bridge(struct pci_dn *pdn)
{ {
...@@ -963,17 +1056,11 @@ rtas_configure_bridge(struct pci_dn *pdn) ...@@ -963,17 +1056,11 @@ rtas_configure_bridge(struct pci_dn *pdn)
BUID_HI(pdn->phb->buid), BUID_HI(pdn->phb->buid),
BUID_LO(pdn->phb->buid)); BUID_LO(pdn->phb->buid));
if (rc) { if (rc) {
printk (KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n", printk(KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n",
rc, pdn->node->full_name); rc, pdn->node->full_name);
} }
} }
/* ------------------------------------------------------------- */
/* The code below deals with enabling EEH for devices during the
* early boot sequence. EEH must be enabled before any PCI probing
* can be done.
*/
#define EEH_ENABLE 1 #define EEH_ENABLE 1
struct eeh_early_enable_info { struct eeh_early_enable_info {
...@@ -981,7 +1068,18 @@ struct eeh_early_enable_info { ...@@ -981,7 +1068,18 @@ struct eeh_early_enable_info {
unsigned int buid_lo; unsigned int buid_lo;
}; };
static int get_pe_addr (int config_addr, /**
* get_pe_addr - Retrieve PE address with given BDF address
* @config_addr: BDF address
* @info: BUID of the associated PHB
*
* There're 2 kinds of addresses existing in EEH core components:
* BDF address and PE address. Besides, there has dedicated platform
* dependent function call to retrieve the PE address according to
* the given BDF address. Further more, we prefer PE address on BDF
* address in EEH core components.
*/
static int get_pe_addr(int config_addr,
struct eeh_early_enable_info *info) struct eeh_early_enable_info *info)
{ {
unsigned int rets[3]; unsigned int rets[3];
...@@ -990,12 +1088,12 @@ static int get_pe_addr (int config_addr, ...@@ -990,12 +1088,12 @@ static int get_pe_addr (int config_addr,
/* Use latest config-addr token on power6 */ /* Use latest config-addr token on power6 */
if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) { if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
/* Make sure we have a PE in hand */ /* Make sure we have a PE in hand */
ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets, ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
config_addr, info->buid_hi, info->buid_lo, 1); config_addr, info->buid_hi, info->buid_lo, 1);
if (ret || (rets[0]==0)) if (ret || (rets[0]==0))
return 0; return 0;
ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets, ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
config_addr, info->buid_hi, info->buid_lo, 0); config_addr, info->buid_hi, info->buid_lo, 0);
if (ret) if (ret)
return 0; return 0;
...@@ -1004,7 +1102,7 @@ static int get_pe_addr (int config_addr, ...@@ -1004,7 +1102,7 @@ static int get_pe_addr (int config_addr,
/* Use older config-addr token on power5 */ /* Use older config-addr token on power5 */
if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) { if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets, ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
config_addr, info->buid_hi, info->buid_lo, 0); config_addr, info->buid_hi, info->buid_lo, 0);
if (ret) if (ret)
return 0; return 0;
...@@ -1013,7 +1111,15 @@ static int get_pe_addr (int config_addr, ...@@ -1013,7 +1111,15 @@ static int get_pe_addr (int config_addr,
return 0; return 0;
} }
/* Enable eeh for the given device node. */ /**
* early_enable_eeh - Early enable EEH on the indicated device
* @dn: device node
* @data: BUID
*
* Enable EEH functionality on the specified PCI device. The function
* is expected to be called before real PCI probing is done. However,
* the PHBs have been initialized at this point.
*/
static void *early_enable_eeh(struct device_node *dn, void *data) static void *early_enable_eeh(struct device_node *dn, void *data)
{ {
unsigned int rets[3]; unsigned int rets[3];
...@@ -1047,7 +1153,8 @@ static void *early_enable_eeh(struct device_node *dn, void *data) ...@@ -1047,7 +1153,8 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
pdn->class_code = *class_code; pdn->class_code = *class_code;
/* Ok... see if this device supports EEH. Some do, some don't, /* Ok... see if this device supports EEH. Some do, some don't,
* and the only way to find out is to check each and every one. */ * and the only way to find out is to check each and every one.
*/
regs = of_get_property(dn, "reg", NULL); regs = of_get_property(dn, "reg", NULL);
if (regs) { if (regs) {
/* First register entry is addr (00BBSS00) */ /* First register entry is addr (00BBSS00) */
...@@ -1061,13 +1168,15 @@ static void *early_enable_eeh(struct device_node *dn, void *data) ...@@ -1061,13 +1168,15 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
pdn->eeh_config_addr = regs[0]; pdn->eeh_config_addr = regs[0];
/* If the newer, better, ibm,get-config-addr-info is supported, /* If the newer, better, ibm,get-config-addr-info is supported,
* then use that instead. */ * then use that instead.
*/
pdn->eeh_pe_config_addr = get_pe_addr(pdn->eeh_config_addr, info); pdn->eeh_pe_config_addr = get_pe_addr(pdn->eeh_config_addr, info);
/* Some older systems (Power4) allow the /* Some older systems (Power4) allow the
* ibm,set-eeh-option call to succeed even on nodes * ibm,set-eeh-option call to succeed even on nodes
* where EEH is not supported. Verify support * where EEH is not supported. Verify support
* explicitly. */ * explicitly.
*/
ret = read_slot_reset_state(pdn, rets); ret = read_slot_reset_state(pdn, rets);
if ((ret == 0) && (rets[1] == 1)) if ((ret == 0) && (rets[1] == 1))
enable = 1; enable = 1;
...@@ -1083,7 +1192,8 @@ static void *early_enable_eeh(struct device_node *dn, void *data) ...@@ -1083,7 +1192,8 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
} else { } else {
/* This device doesn't support EEH, but it may have an /* This device doesn't support EEH, but it may have an
* EEH parent, in which case we mark it as supported. */ * EEH parent, in which case we mark it as supported.
*/
if (dn->parent && PCI_DN(dn->parent) if (dn->parent && PCI_DN(dn->parent)
&& (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
/* Parent supports EEH. */ /* Parent supports EEH. */
...@@ -1101,7 +1211,9 @@ static void *early_enable_eeh(struct device_node *dn, void *data) ...@@ -1101,7 +1211,9 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
return NULL; return NULL;
} }
/* /**
* eeh_init - EEH initialization
*
* Initialize EEH by trying to enable it for all of the adapters in the system. * Initialize EEH by trying to enable it for all of the adapters in the system.
* As a side effect we can determine here if eeh is supported at all. * As a side effect we can determine here if eeh is supported at all.
* Note that we leave EEH on so failed config cycles won't cause a machine * Note that we leave EEH on so failed config cycles won't cause a machine
...@@ -1133,7 +1245,7 @@ void __init eeh_init(void) ...@@ -1133,7 +1245,7 @@ void __init eeh_init(void)
ibm_slot_error_detail = rtas_token("ibm,slot-error-detail"); ibm_slot_error_detail = rtas_token("ibm,slot-error-detail");
ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info"); ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2"); ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
ibm_configure_bridge = rtas_token ("ibm,configure-bridge"); ibm_configure_bridge = rtas_token("ibm,configure-bridge");
ibm_configure_pe = rtas_token("ibm,configure-pe"); ibm_configure_pe = rtas_token("ibm,configure-pe");
if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE)
...@@ -1170,7 +1282,7 @@ void __init eeh_init(void) ...@@ -1170,7 +1282,7 @@ void __init eeh_init(void)
} }
/** /**
* eeh_add_device_early - enable EEH for the indicated device_node * eeh_add_device_early - Enable EEH for the indicated device_node
* @dn: device node for which to set up EEH * @dn: device node for which to set up EEH
* *
* This routine must be used to perform EEH initialization for PCI * This routine must be used to perform EEH initialization for PCI
...@@ -1199,6 +1311,14 @@ static void eeh_add_device_early(struct device_node *dn) ...@@ -1199,6 +1311,14 @@ static void eeh_add_device_early(struct device_node *dn)
early_enable_eeh(dn, &info); early_enable_eeh(dn, &info);
} }
/**
* eeh_add_device_tree_early - Enable EEH for the indicated device
* @dn: device node
*
* This routine must be used to perform EEH initialization for the
* indicated PCI device that was added after system boot (e.g.
* hotplug, dlpar).
*/
void eeh_add_device_tree_early(struct device_node *dn) void eeh_add_device_tree_early(struct device_node *dn)
{ {
struct device_node *sib; struct device_node *sib;
...@@ -1210,7 +1330,7 @@ void eeh_add_device_tree_early(struct device_node *dn) ...@@ -1210,7 +1330,7 @@ void eeh_add_device_tree_early(struct device_node *dn)
EXPORT_SYMBOL_GPL(eeh_add_device_tree_early); EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
/** /**
* eeh_add_device_late - perform EEH initialization for the indicated pci device * eeh_add_device_late - Perform EEH initialization for the indicated pci device
* @dev: pci device for which to set up EEH * @dev: pci device for which to set up EEH
* *
* This routine must be used to complete EEH initialization for PCI * This routine must be used to complete EEH initialization for PCI
...@@ -1234,13 +1354,21 @@ static void eeh_add_device_late(struct pci_dev *dev) ...@@ -1234,13 +1354,21 @@ static void eeh_add_device_late(struct pci_dev *dev)
} }
WARN_ON(pdn->pcidev); WARN_ON(pdn->pcidev);
pci_dev_get (dev); pci_dev_get(dev);
pdn->pcidev = dev; pdn->pcidev = dev;
pci_addr_cache_insert_device(dev); pci_addr_cache_insert_device(dev);
eeh_sysfs_add_device(dev); eeh_sysfs_add_device(dev);
} }
/**
* eeh_add_device_tree_late - Perform EEH initialization for the indicated PCI bus
* @bus: PCI bus
*
* This routine must be used to perform EEH initialization for PCI
* devices which are attached to the indicated PCI bus. The PCI bus
* is added after system boot through hotplug or dlpar.
*/
void eeh_add_device_tree_late(struct pci_bus *bus) void eeh_add_device_tree_late(struct pci_bus *bus)
{ {
struct pci_dev *dev; struct pci_dev *dev;
...@@ -1257,7 +1385,7 @@ void eeh_add_device_tree_late(struct pci_bus *bus) ...@@ -1257,7 +1385,7 @@ void eeh_add_device_tree_late(struct pci_bus *bus)
EXPORT_SYMBOL_GPL(eeh_add_device_tree_late); EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
/** /**
* eeh_remove_device - undo EEH setup for the indicated pci device * eeh_remove_device - Undo EEH setup for the indicated pci device
* @dev: pci device to be removed * @dev: pci device to be removed
* *
* This routine should be called when a device is removed from * This routine should be called when a device is removed from
...@@ -1281,12 +1409,20 @@ static void eeh_remove_device(struct pci_dev *dev) ...@@ -1281,12 +1409,20 @@ static void eeh_remove_device(struct pci_dev *dev)
return; return;
} }
PCI_DN(dn)->pcidev = NULL; PCI_DN(dn)->pcidev = NULL;
pci_dev_put (dev); pci_dev_put(dev);
pci_addr_cache_remove_device(dev); pci_addr_cache_remove_device(dev);
eeh_sysfs_remove_device(dev); eeh_sysfs_remove_device(dev);
} }
/**
* eeh_remove_bus_device - Undo EEH setup for the indicated PCI device
* @dev: PCI device
*
* This routine must be called when a device is removed from the
* running system through hotplug or dlpar. The corresponding
* PCI address cache will be removed.
*/
void eeh_remove_bus_device(struct pci_dev *dev) void eeh_remove_bus_device(struct pci_dev *dev)
{ {
struct pci_bus *bus = dev->subordinate; struct pci_bus *bus = dev->subordinate;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7