Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits)
  usb: gadget: composite: avoid access beyond array max length
  USB: serial: handle Data Carrier Detect changes
  USB: gadget: Fix endpoint representation in ci13xxx_udc
  USB: gadget: Fix error path in ci13xxx_udc gadget probe function
  usb: pch_udc: Fix the worning log issue at gadget driver remove
  USB: serial: Updated support for ICOM devices
  USB: ehci-mxc: add work-around for efika mx/sb bug
  USB: unbreak ehci-mxc on otg port of i.MX27
  drivers: update to pl2303 usb-serial to support Motorola cables
  USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products
  USB serial: add missing .usb_driver field in serial drivers
  USB: ehci-fsl: Fix 'have_sysif_regs' detection
  USB: g_printer: fix bug in module parameter definitions
  USB: g_printer: fix bug in unregistration
  USB: uss720: remove duplicate USB device
  MAINTAINERS: add ueagle-atm entry
  USB: EHCI: fix DMA deallocation bug
  USB: pch_udc: support new device ML7213 IOH
  usb: pch_udc: Fixed issue which does not work with g_serial
  usb: set ep_dev async suspend should be later than device_initialize
  ...

MAINTAINERS

@@ -3139,6 +3139,12 @@ S:	Maintained
 F:	net/ieee802154/
 F:	drivers/ieee802154/
 
+IKANOS/ADI EAGLE ADSL USB DRIVER
+M:	Matthieu Castet <castet.matthieu@free.fr>
+M:	Stanislaw Gruszka <stf_xl@wp.pl>
+S:	Maintained
+F:	drivers/usb/atm/ueagle-atm.c
+
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
 M:	Mimi Zohar <zohar@us.ibm.com>
 S:	Supported

drivers/usb/class/cdc-wdm.c

@@ -342,7 +342,7 @@ static ssize_t wdm_write
 		goto outnp;
 	}
 
-	if (!file->f_flags && O_NONBLOCK)
+	if (!(file->f_flags & O_NONBLOCK))
 		r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
 								&desc->flags));
 	else

drivers/usb/core/endpoint.c

@@ -192,12 +192,12 @@ int usb_create_ep_devs(struct device *parent,
 	ep_dev->dev.parent = parent;
 	ep_dev->dev.release = ep_device_release;
 	dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress);
-	device_enable_async_suspend(&ep_dev->dev);
 
 	retval = device_register(&ep_dev->dev);
 	if (retval)
 		goto error_register;
 
+	device_enable_async_suspend(&ep_dev->dev);
 	endpoint->ep_dev = ep_dev;
 	return retval;
 

drivers/usb/core/hcd-pci.c

@@ -405,6 +405,11 @@ static int suspend_common(struct device *dev, bool do_wakeup)
 			return retval;
 	}
 
+	/* If MSI-X is enabled, the driver will have synchronized all vectors
+	 * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
+	 * synchronized here.
+	 */
+	if (!hcd->msix_enabled)
 		synchronize_irq(pci_dev->irq);
 
 	/* Downstream ports from this root hub should already be quiesced, so

drivers/usb/core/hub.c

@@ -676,6 +676,8 @@ static void hub_init_func3(struct work_struct *ws);
 static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 {
 	struct usb_device *hdev = hub->hdev;
+	struct usb_hcd *hcd;
+	int ret;
 	int port1;
 	int status;
 	bool need_debounce_delay = false;
@@ -714,6 +716,25 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			usb_autopm_get_interface_no_resume(
 					to_usb_interface(hub->intfdev));
 			return;		/* Continues at init2: below */
+		} else if (type == HUB_RESET_RESUME) {
+			/* The internal host controller state for the hub device
+			 * may be gone after a host power loss on system resume.
+			 * Update the device's info so the HW knows it's a hub.
+			 */
+			hcd = bus_to_hcd(hdev->bus);
+			if (hcd->driver->update_hub_device) {
+				ret = hcd->driver->update_hub_device(hcd, hdev,
+						&hub->tt, GFP_NOIO);
+				if (ret < 0) {
+					dev_err(hub->intfdev, "Host not "
+							"accepting hub info "
+							"update.\n");
+					dev_err(hub->intfdev, "LS/FS devices "
+							"and hubs may not work "
+							"under this hub\n.");
+				}
+			}
+			hub_power_on(hub, true);
 		} else {
 			hub_power_on(hub, true);
 		}

drivers/usb/gadget/Kconfig

@@ -509,7 +509,7 @@ config USB_LANGWELL
 	select USB_GADGET_SELECTED
 
 config USB_GADGET_EG20T
-	boolean "Intel EG20T(Topcliff) USB Device controller"
+	boolean "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
@@ -525,6 +525,11 @@ config USB_GADGET_EG20T
 	  This driver dose not support interrupt transfer or isochronous
 	  transfer modes.
 
+	  This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
+	  for IVI(In-Vehicle Infotainment) use.
+	  ML7213 is companion chip for Intel Atom E6xx series.
+	  ML7213 is completely compatible for Intel EG20T PCH.
+
 config USB_EG20T
 	tristate
 	depends on USB_GADGET_EG20T

drivers/usb/gadget/ci13xxx_udc.h

@@ -20,7 +20,7 @@
  * DEFINE
  *****************************************************************************/
 #define CI13XXX_PAGE_SIZE  4096ul /* page size for TD's */
-#define ENDPT_MAX          (16)
+#define ENDPT_MAX          (32)
 #define CTRL_PAYLOAD_MAX   (64)
 #define RX        (0)  /* similar to USB_DIR_OUT but can be used as an index */
 #define TX        (1)  /* similar to USB_DIR_IN  but can be used as an index */
@@ -88,8 +88,7 @@ struct ci13xxx_ep {
 		struct list_head   queue;
 		struct ci13xxx_qh *ptr;
 		dma_addr_t         dma;
-	}                                      qh[2];
-	struct usb_request                    *status;
+	}                                      qh;
 	int                                    wedge;
 
 	/* global resources */
@@ -119,9 +118,13 @@ struct ci13xxx {
 
 	struct dma_pool           *qh_pool;   /* DMA pool for queue heads */
 	struct dma_pool           *td_pool;   /* DMA pool for transfer descs */
+	struct usb_request        *status;    /* ep0 status request */
 
 	struct usb_gadget          gadget;     /* USB slave device */
 	struct ci13xxx_ep          ci13xxx_ep[ENDPT_MAX]; /* extended endpts */
+	u32                        ep0_dir;    /* ep0 direction */
+#define ep0out ci13xxx_ep[0]
+#define ep0in  ci13xxx_ep[16]
 
 	struct usb_gadget_driver  *driver;     /* 3rd party gadget driver */
 	struct ci13xxx_udc_driver *udc_driver; /* device controller driver */

drivers/usb/gadget/composite.c

@@ -928,7 +928,8 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 		 */
 		switch (ctrl->bRequestType & USB_RECIP_MASK) {
 		case USB_RECIP_INTERFACE:
-			if (cdev->config)
+			if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
+				break;
 			f = cdev->config->interface[intf];
 			break;
 

drivers/usb/gadget/printer.c

@@ -131,31 +131,31 @@ static struct printer_dev usb_printer_gadget;
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
 
-static ushort __initdata idVendor;
+static ushort idVendor;
 module_param(idVendor, ushort, S_IRUGO);
 MODULE_PARM_DESC(idVendor, "USB Vendor ID");
 
-static ushort __initdata idProduct;
+static ushort idProduct;
 module_param(idProduct, ushort, S_IRUGO);
 MODULE_PARM_DESC(idProduct, "USB Product ID");
 
-static ushort __initdata bcdDevice;
+static ushort bcdDevice;
 module_param(bcdDevice, ushort, S_IRUGO);
 MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
 
-static char *__initdata iManufacturer;
+static char *iManufacturer;
 module_param(iManufacturer, charp, S_IRUGO);
 MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
 
-static char *__initdata iProduct;
+static char *iProduct;
 module_param(iProduct, charp, S_IRUGO);
 MODULE_PARM_DESC(iProduct, "USB Product string");
 
-static char *__initdata iSerialNum;
+static char *iSerialNum;
 module_param(iSerialNum, charp, S_IRUGO);
 MODULE_PARM_DESC(iSerialNum, "1");
 
-static char *__initdata iPNPstring;
+static char *iPNPstring;
 module_param(iPNPstring, charp, S_IRUGO);
 MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;");
 
@@ -1596,13 +1596,12 @@ cleanup(void)
 	int status;
 
 	mutex_lock(&usb_printer_gadget.lock_printer_io);
-	class_destroy(usb_gadget_class);
-	unregister_chrdev_region(g_printer_devno, 2);
-
 	status = usb_gadget_unregister_driver(&printer_driver);
 	if (status)
 		ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
 
+	unregister_chrdev_region(g_printer_devno, 2);
+	class_destroy(usb_gadget_class);
 	mutex_unlock(&usb_printer_gadget.lock_printer_io);
 }
 module_exit(cleanup);

drivers/usb/host/ehci-fsl.c

@@ -52,7 +52,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	struct resource *res;
 	int irq;
 	int retval;
-	unsigned int temp;
 
 	pr_debug("initializing FSL-SOC USB Controller\n");
 
@@ -126,18 +125,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 		goto err3;
 	}
 
-	/*
-	 * Check if it is MPC5121 SoC, otherwise set pdata->have_sysif_regs
-	 * flag for 83xx or 8536 system interface registers.
-	 */
-	if (pdata->big_endian_mmio)
-		temp = in_be32(hcd->regs + FSL_SOC_USB_ID);
-	else
-		temp = in_le32(hcd->regs + FSL_SOC_USB_ID);
-
-	if ((temp & ID_MSK) != (~((temp & NID_MSK) >> 8) & ID_MSK))
-		pdata->have_sysif_regs = 1;
-
 	/* Enable USB controller, 83xx or 8536 */
 	if (pdata->have_sysif_regs)
 		setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);

drivers/usb/host/ehci-fsl.h

@@ -19,9 +19,6 @@
 #define _EHCI_FSL_H
 
 /* offsets for the non-ehci registers in the FSL SOC USB controller */
-#define FSL_SOC_USB_ID		0x0
-#define ID_MSK			0x3f
-#define NID_MSK			0x3f00
 #define FSL_SOC_USB_ULPIVP	0x170
 #define FSL_SOC_USB_PORTSC1	0x184
 #define PORT_PTS_MSK		(3<<30)

drivers/usb/host/ehci-hcd.c

@@ -572,6 +572,8 @@ static int ehci_init(struct usb_hcd *hcd)
 	ehci->iaa_watchdog.function = ehci_iaa_watchdog;
 	ehci->iaa_watchdog.data = (unsigned long) ehci;
 
+	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+
 	/*
 	 * hw default: 1K periodic list heads, one per frame.
 	 * periodic_size can shrink by USBCMD update if hcc_params allows.
@@ -579,11 +581,20 @@ static int ehci_init(struct usb_hcd *hcd)
 	ehci->periodic_size = DEFAULT_I_TDPS;
 	INIT_LIST_HEAD(&ehci->cached_itd_list);
 	INIT_LIST_HEAD(&ehci->cached_sitd_list);
+
+	if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+		/* periodic schedule size can be smaller than default */
+		switch (EHCI_TUNE_FLS) {
+		case 0: ehci->periodic_size = 1024; break;
+		case 1: ehci->periodic_size = 512; break;
+		case 2: ehci->periodic_size = 256; break;
+		default:	BUG();
+		}
+	}
 	if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
 		return retval;
 
 	/* controllers may cache some of the periodic schedule ... */
-	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
 	if (HCC_ISOC_CACHE(hcc_params))		// full frame cache
 		ehci->i_thresh = 2 + 8;
 	else					// N microframes cached
@@ -637,12 +648,6 @@ static int ehci_init(struct usb_hcd *hcd)
 		/* periodic schedule size can be smaller than default */
 		temp &= ~(3 << 2);
 		temp |= (EHCI_TUNE_FLS << 2);
-		switch (EHCI_TUNE_FLS) {
-		case 0: ehci->periodic_size = 1024; break;
-		case 1: ehci->periodic_size = 512; break;
-		case 2: ehci->periodic_size = 256; break;
-		default:	BUG();
-		}
 	}
 	if (HCC_LPM(hcc_params)) {
 		/* support link power management EHCI 1.1 addendum */

drivers/usb/host/ehci-mxc.c

@@ -21,10 +21,13 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
 #include <linux/slab.h>
 
 #include <mach/mxc_ehci.h>
 
+#include <asm/mach-types.h>
+
 #define ULPI_VIEWPORT_OFFSET	0x170
 
 struct ehci_mxc_priv {
@@ -114,6 +117,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	struct usb_hcd *hcd;
 	struct resource *res;
 	int irq, ret;
+	unsigned int flags;
 	struct ehci_mxc_priv *priv;
 	struct device *dev = &pdev->dev;
 	struct ehci_hcd *ehci;
@@ -177,8 +181,8 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 		clk_enable(priv->ahbclk);
 	}
 
-	/* "dr" device has its own clock */
-	if (pdev->id == 0) {
+	/* "dr" device has its own clock on i.MX51 */
+	if (cpu_is_mx51() && (pdev->id == 0)) {
 		priv->phy1clk = clk_get(dev, "usb_phy1");
 		if (IS_ERR(priv->phy1clk)) {
 			ret = PTR_ERR(priv->phy1clk);
@@ -240,6 +244,23 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_add;
 
+	if (pdata->otg) {
+		/*
+		 * efikamx and efikasb have some hardware bug which is
+		 * preventing usb to work unless CHRGVBUS is set.
+		 * It's in violation of USB specs
+		 */
+		if (machine_is_mx51_efikamx() || machine_is_mx51_efikasb()) {
+			flags = otg_io_read(pdata->otg, ULPI_OTG_CTRL);
+			flags |= ULPI_OTG_CTRL_CHRGVBUS;
+			ret = otg_io_write(pdata->otg, flags, ULPI_OTG_CTRL);
+			if (ret) {
+				dev_err(dev, "unable to set CHRVBUS\n");
+				goto err_add;
+			}
+		}
+	}
+
 	return 0;
 
 err_add:

drivers/usb/host/ehci-pci.c

@@ -44,28 +44,35 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
 	return 0;
 }
 
-static int ehci_quirk_amd_SB800(struct ehci_hcd *ehci)
+static int ehci_quirk_amd_hudson(struct ehci_hcd *ehci)
 {
 	struct pci_dev *amd_smbus_dev;
 	u8 rev = 0;
 
 	amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
+	if (amd_smbus_dev) {
+		pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+		if (rev < 0x40) {
+			pci_dev_put(amd_smbus_dev);
+			amd_smbus_dev = NULL;
+			return 0;
+		}
+	} else {
+		amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x780b, NULL);
 		if (!amd_smbus_dev)
 			return 0;
-
 		pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
-	if (rev < 0x40) {
+		if (rev < 0x11 || rev > 0x18) {
 			pci_dev_put(amd_smbus_dev);
 			amd_smbus_dev = NULL;
 			return 0;
 		}
+	}
 
 	if (!amd_nb_dev)
 		amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
-	if (!amd_nb_dev)
-		ehci_err(ehci, "QUIRK: unable to get AMD NB device\n");
 
-	ehci_info(ehci, "QUIRK: Enable AMD SB800 L1 fix\n");
+	ehci_info(ehci, "QUIRK: Enable exception for AMD Hudson ASPM\n");
 
 	pci_dev_put(amd_smbus_dev);
 	amd_smbus_dev = NULL;
@@ -131,7 +138,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	/* cache this readonly data; minimize chip reads */
 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
 
-	if (ehci_quirk_amd_SB800(ehci))
+	if (ehci_quirk_amd_hudson(ehci))
 		ehci->amd_l1_fix = 1;
 
 	retval = ehci_halt(ehci);

drivers/usb/host/fsl-mph-dr-of.c

@@ -262,19 +262,24 @@ static void fsl_usb2_mpc5121_exit(struct platform_device *pdev)
 	}
 }
 
-struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
+static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
 	.big_endian_desc = 1,
 	.big_endian_mmio = 1,
 	.es = 1,
+	.have_sysif_regs = 0,
 	.le_setup_buf = 1,
 	.init = fsl_usb2_mpc5121_init,
 	.exit = fsl_usb2_mpc5121_exit,
 };
 #endif /* CONFIG_PPC_MPC512x */
 
+static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = {
+	.have_sysif_regs = 1,
+};
+
 static const struct of_device_id fsl_usb2_mph_dr_of_match[] = {
-	{ .compatible = "fsl-usb2-mph", },
-	{ .compatible = "fsl-usb2-dr", },
+	{ .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, },
+	{ .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, },
 #ifdef CONFIG_PPC_MPC512x
 	{ .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, },
 #endif

drivers/usb/host/xhci-ring.c

@@ -308,11 +308,8 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
 /* Ring the host controller doorbell after placing a command on the ring */
 void xhci_ring_cmd_db(struct xhci_hcd *xhci)
 {
-	u32 temp;
-
 	xhci_dbg(xhci, "// Ding dong!\n");
-	temp = xhci_readl(xhci, &xhci->dba->doorbell[0]) & DB_MASK;
-	xhci_writel(xhci, temp | DB_TARGET_HOST, &xhci->dba->doorbell[0]);
+	xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]);
 	/* Flush PCI posted writes */
 	xhci_readl(xhci, &xhci->dba->doorbell[0]);
 }
@@ -322,26 +319,24 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
 		unsigned int ep_index,
 		unsigned int stream_id)
 {
-	struct xhci_virt_ep *ep;
-	unsigned int ep_state;
-	u32 field;
 	__u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
+	struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
+	unsigned int ep_state = ep->ep_state;
 
-	ep = &xhci->devs[slot_id]->eps[ep_index];
-	ep_state = ep->ep_state;
 	/* Don't ring the doorbell for this endpoint if there are pending
-	 * cancellations because the we don't want to interrupt processing.
+	 * cancellations because we don't want to interrupt processing.
 	 * We don't want to restart any stream rings if there's a set dequeue
 	 * pointer command pending because the device can choose to start any
 	 * stream once the endpoint is on the HW schedule.
 	 * FIXME - check all the stream rings for pending cancellations.
 	 */
-	if (!(ep_state & EP_HALT_PENDING) && !(ep_state & SET_DEQ_PENDING)
-			&& !(ep_state & EP_HALTED)) {
-		field = xhci_readl(xhci, db_addr) & DB_MASK;
-		field |= EPI_TO_DB(ep_index) | STREAM_ID_TO_DB(stream_id);
-		xhci_writel(xhci, field, db_addr);
-	}
+	if ((ep_state & EP_HALT_PENDING) || (ep_state & SET_DEQ_PENDING) ||
+	    (ep_state & EP_HALTED))
+		return;
+	xhci_writel(xhci, DB_VALUE(ep_index, stream_id), db_addr);
+	/* The CPU has better things to do at this point than wait for a
+	 * write-posting flush.  It'll get there soon enough.
+	 */
 }
 
 /* Ring the doorbell for any rings with pending URBs */
@@ -1188,7 +1183,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 
 	addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS * (port_id - 1);
 	temp = xhci_readl(xhci, addr);
-	if ((temp & PORT_CONNECT) && (hcd->state == HC_STATE_SUSPENDED)) {
+	if (hcd->state == HC_STATE_SUSPENDED) {
 		xhci_dbg(xhci, "resume root hub\n");
 		usb_hcd_resume_root_hub(hcd);
 	}
@@ -1710,8 +1705,7 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		/* Others already handled above */
 		break;
 	}
-	dev_dbg(&td->urb->dev->dev,
-			"ep %#x - asked for %d bytes, "
+	xhci_dbg(xhci, "ep %#x - asked for %d bytes, "
 			"%d bytes untransferred\n",
 			td->urb->ep->desc.bEndpointAddress,
 			td->urb->transfer_buffer_length,
@@ -2389,7 +2383,8 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
 	}
 	xhci_dbg(xhci, "\n");
 	if (!in_interrupt())
-		dev_dbg(&urb->dev->dev, "ep %#x - urb len = %d, sglist used, num_trbs = %d\n",
+		xhci_dbg(xhci, "ep %#x - urb len = %d, sglist used, "
+				"num_trbs = %d\n",
 				urb->ep->desc.bEndpointAddress,
 				urb->transfer_buffer_length,
 				num_trbs);
@@ -2414,14 +2409,17 @@ static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
 
 static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
 		unsigned int ep_index, unsigned int stream_id, int start_cycle,
-		struct xhci_generic_trb *start_trb, struct xhci_td *td)
+		struct xhci_generic_trb *start_trb)
 {
 	/*
 	 * Pass all the TRBs to the hardware at once and make sure this write
 	 * isn't reordered.
 	 */
 	wmb();
+	if (start_cycle)
 		start_trb->field[3] |= start_cycle;
+	else
+		start_trb->field[3] &= ~0x1;
 	xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
 }
 
@@ -2449,7 +2447,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	 * to set the polling interval (once the API is added).
 	 */
 	if (xhci_interval != ep_interval) {
-		if (!printk_ratelimit())
+		if (printk_ratelimit())
 			dev_dbg(&urb->dev->dev, "Driver uses different interval"
 					" (%d microframe%s) than xHCI "
 					"(%d microframe%s)\n",
@@ -2551,9 +2549,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		u32 remainder = 0;
 
 		/* Don't change the cycle bit of the first TRB until later */
-		if (first_trb)
+		if (first_trb) {
 			first_trb = false;
-		else
+			if (start_cycle == 0)
+				field |= 0x1;
+		} else
 			field |= ep_ring->cycle_state;
 
 		/* Chain all the TRBs together; clear the chain bit in the last
@@ -2625,7 +2625,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	check_trb_math(urb, num_trbs, running_total);
 	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
-			start_cycle, start_trb, td);
+			start_cycle, start_trb);
 	return 0;
 }
 
@@ -2671,7 +2671,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
 
 	if (!in_interrupt())
-		dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d), addr = %#llx, num_trbs = %d\n",
+		xhci_dbg(xhci, "ep %#x - urb len = %#x (%d), "
+				"addr = %#llx, num_trbs = %d\n",
 				urb->ep->desc.bEndpointAddress,
 				urb->transfer_buffer_length,
 				urb->transfer_buffer_length,
@@ -2711,9 +2712,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		field = 0;
 
 		/* Don't change the cycle bit of the first TRB until later */
-		if (first_trb)
+		if (first_trb) {
 			first_trb = false;
-		else
+			if (start_cycle == 0)
+				field |= 0x1;
+		} else
 			field |= ep_ring->cycle_state;
 
 		/* Chain all the TRBs together; clear the chain bit in the last
@@ -2757,7 +2760,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	check_trb_math(urb, num_trbs, running_total);
 	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
-			start_cycle, start_trb, td);
+			start_cycle, start_trb);
 	return 0;
 }
 
@@ -2818,13 +2821,17 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	/* Queue setup TRB - see section 6.4.1.2.1 */
 	/* FIXME better way to translate setup_packet into two u32 fields? */
 	setup = (struct usb_ctrlrequest *) urb->setup_packet;
+	field = 0;
+	field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
+	if (start_cycle == 0)
+		field |= 0x1;
 	queue_trb(xhci, ep_ring, false, true,
 			/* FIXME endianness is probably going to bite my ass here. */
 			setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
 			setup->wIndex | setup->wLength << 16,
 			TRB_LEN(8) | TRB_INTR_TARGET(0),
 			/* Immediate data in pointer */
-			TRB_IDT | TRB_TYPE(TRB_SETUP));
+			field);
 
 	/* If there's data, queue data TRBs */
 	field = 0;
@@ -2859,7 +2866,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
 
 	giveback_first_trb(xhci, slot_id, ep_index, 0,
-			start_cycle, start_trb, td);
+			start_cycle, start_trb);
 	return 0;
 }
 
@@ -2900,6 +2907,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	int running_total, trb_buff_len, td_len, td_remain_len, ret;
 	u64 start_addr, addr;
 	int i, j;
+	bool more_trbs_coming;
 
 	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
 
@@ -2910,7 +2918,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	}
 
 	if (!in_interrupt())
-		dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d),"
+		xhci_dbg(xhci, "ep %#x - urb len = %#x (%d),"
 				" addr = %#llx, num_tds = %d\n",
 				urb->ep->desc.bEndpointAddress,
 				urb->transfer_buffer_length,
@@ -2950,7 +2958,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 				field |= TRB_TYPE(TRB_ISOC);
 				/* Assume URB_ISO_ASAP is set */
 				field |= TRB_SIA;
-				if (i > 0)
+				if (i == 0) {
+					if (start_cycle == 0)
+						field |= 0x1;
+				} else
 					field |= ep_ring->cycle_state;
 				first_trb = false;
 			} else {
@@ -2965,9 +2976,11 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			 */
 			if (j < trbs_per_td - 1) {
 				field |= TRB_CHAIN;
+				more_trbs_coming = true;
 			} else {
 				td->last_trb = ep_ring->enqueue;
 				field |= TRB_IOC;
+				more_trbs_coming = false;
 			}
 
 			/* Calculate TRB length */
@@ -2980,7 +2993,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			length_field = TRB_LEN(trb_buff_len) |
 				remainder |
 				TRB_INTR_TARGET(0);
-			queue_trb(xhci, ep_ring, false, false,
+			queue_trb(xhci, ep_ring, false, more_trbs_coming,
 				lower_32_bits(addr),
 				upper_32_bits(addr),
 				length_field,
@@ -3003,10 +3016,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		}
 	}
 
-	wmb();
-	start_trb->field[3] |= start_cycle;
-
-	xhci_ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id);
+	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
+			start_cycle, start_trb);
 	return 0;
 }
 
@@ -3064,7 +3075,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
 	 * to set the polling interval (once the API is added).
 	 */
 	if (xhci_interval != ep_interval) {
-		if (!printk_ratelimit())
+		if (printk_ratelimit())
 			dev_dbg(&urb->dev->dev, "Driver uses different interval"
 					" (%d microframe%s) than xHCI "
 					"(%d microframe%s)\n",

drivers/usb/host/xhci.c

@@ -226,7 +226,8 @@ static int xhci_setup_msi(struct xhci_hcd *xhci)
 static int xhci_setup_msix(struct xhci_hcd *xhci)
 {
 	int i, ret = 0;
-	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 
 	/*
 	 * calculate number of msi-x vectors supported.
@@ -265,6 +266,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
 			goto disable_msix;
 	}
 
+	hcd->msix_enabled = 1;
 	return ret;
 
 disable_msix:
@@ -280,7 +282,8 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
 /* Free any IRQs and disable MSI-X */
 static void xhci_cleanup_msix(struct xhci_hcd *xhci)
 {
-	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 
 	xhci_free_irq(xhci);
 
@@ -292,6 +295,7 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci)
 		pci_disable_msi(pdev);
 	}
 
+	hcd->msix_enabled = 0;
 	return;
 }
 
@@ -508,9 +512,10 @@ void xhci_stop(struct usb_hcd *hcd)
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
 	xhci_reset(xhci);
-	xhci_cleanup_msix(xhci);
 	spin_unlock_irq(&xhci->lock);
 
+	xhci_cleanup_msix(xhci);
+
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 	/* Tell the event ring poll function not to reschedule */
 	xhci->zombie = 1;
@@ -544,9 +549,10 @@ void xhci_shutdown(struct usb_hcd *hcd)
 
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
-	xhci_cleanup_msix(xhci);
 	spin_unlock_irq(&xhci->lock);
 
+	xhci_cleanup_msix(xhci);
+
 	xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
 		    xhci_readl(xhci, &xhci->op_regs->status));
 }
@@ -647,6 +653,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	int			rc = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	u32			command;
+	int			i;
 
 	spin_lock_irq(&xhci->lock);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -677,10 +684,15 @@ int xhci_suspend(struct xhci_hcd *xhci)
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
 	}
-	/* step 5: remove core well power */
-	xhci_cleanup_msix(xhci);
 	spin_unlock_irq(&xhci->lock);
 
+	/* step 5: remove core well power */
+	/* synchronize irq when using MSI-X */
+	if (xhci->msix_entries) {
+		for (i = 0; i < xhci->msix_count; i++)
+			synchronize_irq(xhci->msix_entries[i].vector);
+	}
+
 	return rc;
 }
 
@@ -694,7 +706,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 {
 	u32			command, temp = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
-	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 	int	old_state, retval;
 
 	old_state = hcd->state;
@@ -729,9 +740,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		xhci_dbg(xhci, "Stop HCD\n");
 		xhci_halt(xhci);
 		xhci_reset(xhci);
-		if (hibernated)
-			xhci_cleanup_msix(xhci);
 		spin_unlock_irq(&xhci->lock);
+		xhci_cleanup_msix(xhci);
 
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 		/* Tell the event ring poll function not to reschedule */
@@ -765,30 +775,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		return retval;
 	}
 
-	spin_unlock_irq(&xhci->lock);
-	/* Re-setup MSI-X */
-	if (hcd->irq)
-		free_irq(hcd->irq, hcd);
-	hcd->irq = -1;
-
-	retval = xhci_setup_msix(xhci);
-	if (retval)
-		/* fall back to msi*/
-		retval = xhci_setup_msi(xhci);
-
-	if (retval) {
-		/* fall back to legacy interrupt*/
-		retval = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
-					hcd->irq_descr, hcd);
-		if (retval) {
-			xhci_err(xhci, "request interrupt %d failed\n",
-					pdev->irq);
-			return retval;
-		}
-		hcd->irq = pdev->irq;
-	}
-
-	spin_lock_irq(&xhci->lock);
 	/* step 4: set Run/Stop bit */
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_RUN;
@@ -2445,8 +2431,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 		xhci_err(xhci, "Error while assigning device slot ID\n");
 		return 0;
 	}
-	/* xhci_alloc_virt_device() does not touch rings; no need to lock */
-	if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) {
+	/* xhci_alloc_virt_device() does not touch rings; no need to lock.
+	 * Use GFP_NOIO, since this function can be called from
+	 * xhci_discover_or_reset_device(), which may be called as part of
+	 * mass storage driver error handling.
+	 */
+	if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) {
 		/* Disable slot, if we can do it without mem alloc */
 		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
 		spin_lock_irqsave(&xhci->lock, flags);

drivers/usb/host/xhci.h

@@ -436,22 +436,18 @@ struct xhci_run_regs {
 /**
  * struct doorbell_array
  *
+ * Bits  0 -  7: Endpoint target
+ * Bits  8 - 15: RsvdZ
+ * Bits 16 - 31: Stream ID
+ *
  * Section 5.6
  */
 struct xhci_doorbell_array {
 	u32	doorbell[256];
 };
 
-#define	DB_TARGET_MASK		0xFFFFFF00
-#define	DB_STREAM_ID_MASK	0x0000FFFF
-#define	DB_TARGET_HOST		0x0
-#define	DB_STREAM_ID_HOST	0x0
-#define	DB_MASK			(0xff << 8)
-
-/* Endpoint Target - bits 0:7 */
-#define EPI_TO_DB(p)		(((p) + 1) & 0xff)
-#define STREAM_ID_TO_DB(p)	(((p) & 0xffff) << 16)
-
+#define DB_VALUE(ep, stream)	((((ep) + 1) & 0xff) | ((stream) << 16))
+#define DB_VALUE_HOST		0x00000000
 
 /**
  * struct xhci_protocol_caps

drivers/usb/misc/usbled.c

@@ -45,7 +45,7 @@ struct usb_led {
 
 static void change_color(struct usb_led *led)
 {
-	int retval;
+	int retval = 0;
 	unsigned char *buffer;
 
 	buffer = kmalloc(8, GFP_KERNEL);

drivers/usb/misc/uss720.c

@@ -776,7 +776,6 @@ static const struct usb_device_id uss720_table[] = {
 	{ USB_DEVICE(0x0557, 0x2001) },
 	{ USB_DEVICE(0x0729, 0x1284) },
 	{ USB_DEVICE(0x1293, 0x0002) },
-	{ USB_DEVICE(0x1293, 0x0002) },
 	{ USB_DEVICE(0x050d, 0x0002) },
 	{ }						/* Terminating entry */
 };

drivers/usb/otg/nop-usb-xceiv.c

@@ -132,6 +132,8 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, nop);
 
+	BLOCKING_INIT_NOTIFIER_HEAD(&nop->otg.notifier);
+
 	return 0;
 exit:
 	kfree(nop);

drivers/usb/otg/ulpi.c

@@ -45,7 +45,7 @@ struct ulpi_info {
 /* ULPI hardcoded IDs, used for probing */
 static struct ulpi_info ulpi_ids[] = {
 	ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"),
-	ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB3319"),
+	ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"),
 };
 
 static int ulpi_set_otg_flags(struct otg_transceiver *otg)

drivers/usb/serial/ch341.c

@@ -486,12 +486,22 @@ static void ch341_read_int_callback(struct urb *urb)
 	if (actual_length >= 4) {
 		struct ch341_private *priv = usb_get_serial_port_data(port);
 		unsigned long flags;
+		u8 prev_line_status = priv->line_status;
 
 		spin_lock_irqsave(&priv->lock, flags);
 		priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
 		if ((data[1] & CH341_MULT_STAT))
 			priv->multi_status_change = 1;
 		spin_unlock_irqrestore(&priv->lock, flags);
+
+		if ((priv->line_status ^ prev_line_status) & CH341_BIT_DCD) {
+			struct tty_struct *tty = tty_port_tty_get(&port->port);
+			if (tty)
+				usb_serial_handle_dcd_change(port, tty,
+					    priv->line_status & CH341_BIT_DCD);
+			tty_kref_put(tty);
+		}
+
 		wake_up_interruptible(&priv->delta_msr_wait);
 	}
 

drivers/usb/serial/cp210x.c

@@ -49,7 +49,6 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
 static void cp210x_break_ctl(struct tty_struct *, int);
 static int cp210x_startup(struct usb_serial *);
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
-static int cp210x_carrier_raised(struct usb_serial_port *p);
 
 static int debug;
 
@@ -87,7 +86,6 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
 	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
 	{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
-	{ USB_DEVICE(0x10C4, 0x8149) }, /* West Mountain Radio Computerized Battery Analyzer */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
 	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
@@ -110,7 +108,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+	{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
 	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
+	{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
 	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
@@ -165,8 +165,7 @@ static struct usb_serial_driver cp210x_device = {
 	.tiocmget 		= cp210x_tiocmget,
 	.tiocmset		= cp210x_tiocmset,
 	.attach			= cp210x_startup,
-	.dtr_rts		= cp210x_dtr_rts,
-	.carrier_raised		= cp210x_carrier_raised
+	.dtr_rts		= cp210x_dtr_rts
 };
 
 /* Config request types */
@@ -765,15 +764,6 @@ static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int cp210x_carrier_raised(struct usb_serial_port *p)
-{
-	unsigned int control;
-	cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1);
-	if (control & CONTROL_DCD)
-		return 1;
-	return 0;
-}
-
 static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;

drivers/usb/serial/digi_acceleport.c

@@ -455,7 +455,6 @@ static int digi_write_room(struct tty_struct *tty);
 static int digi_chars_in_buffer(struct tty_struct *tty);
 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void digi_close(struct usb_serial_port *port);
-static int digi_carrier_raised(struct usb_serial_port *port);
 static void digi_dtr_rts(struct usb_serial_port *port, int on);
 static int digi_startup_device(struct usb_serial *serial);
 static int digi_startup(struct usb_serial *serial);
@@ -511,7 +510,6 @@ static struct usb_serial_driver digi_acceleport_2_device = {
 	.open =				digi_open,
 	.close =			digi_close,
 	.dtr_rts =			digi_dtr_rts,
-	.carrier_raised =		digi_carrier_raised,
 	.write =			digi_write,
 	.write_room =			digi_write_room,
 	.write_bulk_callback = 		digi_write_bulk_callback,
@@ -1339,14 +1337,6 @@ static void digi_dtr_rts(struct usb_serial_port *port, int on)
 	digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
 }
 
-static int digi_carrier_raised(struct usb_serial_port *port)
-{
-	struct digi_port *priv = usb_get_serial_port_data(port);
-	if (priv->dp_modem_signals & TIOCM_CD)
-		return 1;
-	return 0;
-}
-
 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int ret;

drivers/usb/serial/ftdi_sio.c

@@ -676,7 +676,17 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
-	{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },

drivers/usb/serial/ftdi_sio_ids.h

@@ -569,11 +569,23 @@
 #define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
 
 /*
- * Icom ID-1 digital transceiver
- */
-
-#define ICOM_ID1_VID            0x0C26
-#define ICOM_ID1_PID            0x0004
+ * Definitions for Icom Inc. devices
+ */
+#define ICOM_VID		0x0C26 /* Icom vendor ID */
+/* Note: ID-1 is a communications tranceiver for HAM-radio operators */
+#define ICOM_ID_1_PID		0x0004 /* ID-1 USB to RS-232 */
+/* Note: OPC is an Optional cable to connect an Icom Tranceiver */
+#define ICOM_OPC_U_UC_PID	0x0018 /* OPC-478UC, OPC-1122U cloning cable */
+/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */
+#define ICOM_ID_RP2C1_PID	0x0009 /* ID-RP2C Asset 1 to RS-232 */
+#define ICOM_ID_RP2C2_PID	0x000A /* ID-RP2C Asset 2 to RS-232 */
+#define ICOM_ID_RP2D_PID	0x000B /* ID-RP2D configuration port*/
+#define ICOM_ID_RP2VT_PID	0x000C /* ID-RP2V Transmit config port */
+#define ICOM_ID_RP2VR_PID	0x000D /* ID-RP2V Receive config port */
+#define ICOM_ID_RP4KVT_PID	0x0010 /* ID-RP4000V Transmit config port */
+#define ICOM_ID_RP4KVR_PID	0x0011 /* ID-RP4000V Receive config port */
+#define ICOM_ID_RP2KVT_PID	0x0012 /* ID-RP2000V Transmit config port */
+#define ICOM_ID_RP2KVR_PID	0x0013 /* ID-RP2000V Receive config port */
 
 /*
  * GN Otometrics (http://www.otometrics.com)

drivers/usb/serial/generic.c

@@ -479,6 +479,26 @@ int usb_serial_handle_break(struct usb_serial_port *port)
 }
 EXPORT_SYMBOL_GPL(usb_serial_handle_break);
 
+/**
+ *	usb_serial_handle_dcd_change - handle a change of carrier detect state
+ *	@port: usb_serial_port structure for the open port
+ *	@tty: tty_struct structure for the port
+ *	@status: new carrier detect status, nonzero if active
+ */
+void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
+				struct tty_struct *tty, unsigned int status)
+{
+	struct tty_port *port = &usb_port->port;
+
+	dbg("%s - port %d, status %d", __func__, usb_port->number, status);
+
+	if (status)
+		wake_up_interruptible(&port->open_wait);
+	else if (tty && !C_CLOCAL(tty))
+		tty_hangup(tty);
+}
+EXPORT_SYMBOL_GPL(usb_serial_handle_dcd_change);
+
 int usb_serial_generic_resume(struct usb_serial *serial)
 {
 	struct usb_serial_port *port;

drivers/usb/serial/io_tables.h

@@ -199,6 +199,7 @@ static struct usb_serial_driver epic_device = {
 		.name		= "epic",
 	},
 	.description		= "EPiC device",
+	.usb_driver		= &io_driver,
 	.id_table		= Epic_port_id_table,
 	.num_ports		= 1,
 	.open			= edge_open,

drivers/usb/serial/iuu_phoenix.c

@@ -1275,6 +1275,7 @@ static struct usb_serial_driver iuu_device = {
 		   .name = "iuu_phoenix",
 		   },
 	.id_table = id_table,
+	.usb_driver = &iuu_driver,
 	.num_ports = 1,
 	.bulk_in_size = 512,
 	.bulk_out_size = 512,

drivers/usb/serial/keyspan.h

@@ -546,6 +546,7 @@ static struct usb_serial_driver keyspan_pre_device = {
 		.name		= "keyspan_no_firm",
 	},
 	.description		= "Keyspan - (without firmware)",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_pre_ids,
 	.num_ports		= 1,
 	.attach			= keyspan_fake_startup,
@@ -557,6 +558,7 @@ static struct usb_serial_driver keyspan_1port_device = {
 		.name		= "keyspan_1",
 	},
 	.description		= "Keyspan 1 port adapter",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_1port_ids,
 	.num_ports		= 1,
 	.open			= keyspan_open,
@@ -579,6 +581,7 @@ static struct usb_serial_driver keyspan_2port_device = {
 		.name		= "keyspan_2",
 	},
 	.description		= "Keyspan 2 port adapter",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_2port_ids,
 	.num_ports		= 2,
 	.open			= keyspan_open,
@@ -601,6 +604,7 @@ static struct usb_serial_driver keyspan_4port_device = {
 		.name		= "keyspan_4",
 	},
 	.description		= "Keyspan 4 port adapter",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_4port_ids,
 	.num_ports		= 4,
 	.open			= keyspan_open,

drivers/usb/serial/keyspan_pda.c

@@ -679,22 +679,6 @@ static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
 	}
 }
 
-static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
-{
-	struct usb_serial *serial = port->serial;
-	unsigned char modembits;
-
-	/* If we can read the modem status and the DCD is low then
-	   carrier is not raised yet */
-	if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) {
-		if (!(modembits & (1>>6)))
-			return 0;
-	}
-	/* Carrier raised, or we failed (eg disconnected) so
-	   progress accordingly */
-	return 1;
-}
-
 
 static int keyspan_pda_open(struct tty_struct *tty,
 					struct usb_serial_port *port)
@@ -881,7 +865,6 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.id_table =		id_table_std,
 	.num_ports =		1,
 	.dtr_rts =		keyspan_pda_dtr_rts,
-	.carrier_raised	=	keyspan_pda_carrier_raised,
 	.open =			keyspan_pda_open,
 	.close =		keyspan_pda_close,
 	.write =		keyspan_pda_write,

drivers/usb/serial/moto_modem.c

@@ -44,6 +44,7 @@ static struct usb_serial_driver moto_device = {
 		.name =		"moto-modem",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&moto_driver,
 	.num_ports =		1,
 };
 

drivers/usb/serial/option.c

@@ -382,7 +382,16 @@ static void option_instat_callback(struct urb *urb);
 #define HAIER_VENDOR_ID				0x201e
 #define HAIER_PRODUCT_CE100			0x2009
 
-#define CINTERION_VENDOR_ID			0x0681
+/* Cinterion (formerly Siemens) products */
+#define SIEMENS_VENDOR_ID				0x0681
+#define CINTERION_VENDOR_ID				0x1e2d
+#define CINTERION_PRODUCT_HC25_MDM		0x0047
+#define CINTERION_PRODUCT_HC25_MDMNET	0x0040
+#define CINTERION_PRODUCT_HC28_MDM		0x004C
+#define CINTERION_PRODUCT_HC28_MDMNET	0x004A /* same for HC28J */
+#define CINTERION_PRODUCT_EU3_E			0x0051
+#define CINTERION_PRODUCT_EU3_P			0x0052
+#define CINTERION_PRODUCT_PH8			0x0053
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -944,7 +953,17 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F) },
 	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)},
 	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)},
-	{ USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) },
+	/* Cinterion */
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, 
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
+
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */

drivers/usb/serial/oti6858.c

@@ -157,6 +157,7 @@ static struct usb_serial_driver oti6858_device = {
 		.name =		"oti6858",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&oti6858_driver,
 	.num_ports =		1,
 	.open =			oti6858_open,
 	.close =		oti6858_close,

drivers/usb/serial/pl2303.c

@@ -50,6 +50,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
@@ -677,9 +678,11 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 {
 
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	struct tty_struct *tty;
 	unsigned long flags;
 	u8 status_idx = UART_STATE;
 	u8 length = UART_STATE + 1;
+	u8 prev_line_status;
 	u16 idv, idp;
 
 	idv = le16_to_cpu(port->serial->dev->descriptor.idVendor);
@@ -701,11 +704,20 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 
 	/* Save off the uart status for others to look at */
 	spin_lock_irqsave(&priv->lock, flags);
+	prev_line_status = priv->line_status;
 	priv->line_status = data[status_idx];
 	spin_unlock_irqrestore(&priv->lock, flags);
 	if (priv->line_status & UART_BREAK_ERROR)
 		usb_serial_handle_break(port);
 	wake_up_interruptible(&priv->delta_msr_wait);
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+	if ((priv->line_status ^ prev_line_status) & UART_DCD)
+		usb_serial_handle_dcd_change(port, tty,
+				priv->line_status & UART_DCD);
+	tty_kref_put(tty);
 }
 
 static void pl2303_read_int_callback(struct urb *urb)

drivers/usb/serial/pl2303.h

@@ -21,6 +21,7 @@
 #define PL2303_PRODUCT_ID_MMX		0x0612
 #define PL2303_PRODUCT_ID_GPRS		0x0609
 #define PL2303_PRODUCT_ID_HCR331	0x331a
+#define PL2303_PRODUCT_ID_MOTOROLA	0x0307
 
 #define ATEN_VENDOR_ID		0x0557
 #define ATEN_VENDOR_ID2		0x0547

drivers/usb/serial/qcaux.c

@@ -36,6 +36,7 @@
 #define UTSTARCOM_PRODUCT_UM175_V1		0x3712
 #define UTSTARCOM_PRODUCT_UM175_V2		0x3714
 #define UTSTARCOM_PRODUCT_UM175_ALLTEL		0x3715
+#define PANTECH_PRODUCT_UML290_VZW		0x3718
 
 /* CMOTECH devices */
 #define CMOTECH_VENDOR_ID			0x16d8
@@ -66,6 +67,7 @@ static struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -84,6 +86,7 @@ static struct usb_serial_driver qcaux_device = {
 		.name =		"qcaux",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&qcaux_driver,
 	.num_ports =		1,
 };
 

drivers/usb/serial/siemens_mpi.c

@@ -42,6 +42,7 @@ static struct usb_serial_driver siemens_usb_mpi_device = {
 		.name =		"siemens_mpi",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&siemens_usb_mpi_driver,
 	.num_ports =		1,
 };
 

drivers/usb/serial/spcp8x5.c

@@ -133,7 +133,7 @@ struct spcp8x5_usb_ctrl_arg {
 
 /* how come ??? */
 #define UART_STATE			0x08
-#define UART_STATE_TRANSIENT_MASK	0x74
+#define UART_STATE_TRANSIENT_MASK	0x75
 #define UART_DCD			0x01
 #define UART_DSR			0x02
 #define UART_BREAK_ERROR		0x04
@@ -525,6 +525,10 @@ static void spcp8x5_process_read_urb(struct urb *urb)
 		/* overrun is special, not associated with a char */
 		if (status & UART_OVERRUN_ERROR)
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+		if (status & UART_DCD)
+			usb_serial_handle_dcd_change(port, tty,
+				   priv->line_status & MSR_STATUS_LINE_DCD);
 	}
 
 	tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
@@ -645,6 +649,7 @@ static struct usb_serial_driver spcp8x5_device = {
 		.name =		"SPCP8x5",
 	},
 	.id_table		= id_table,
+	.usb_driver		= &spcp8x5_driver,
 	.num_ports		= 1,
 	.open 			= spcp8x5_open,
 	.dtr_rts		= spcp8x5_dtr_rts,

drivers/usb/serial/usb-serial.c

@@ -1344,11 +1344,15 @@ int usb_serial_register(struct usb_serial_driver *driver)
 		return -ENODEV;
 
 	fixup_generic(driver);
-	if (driver->usb_driver)
-		driver->usb_driver->supports_autosuspend = 1;
 
 	if (!driver->description)
 		driver->description = driver->driver.name;
+	if (!driver->usb_driver) {
+		WARN(1, "Serial driver %s has no usb_driver\n",
+				driver->description);
+		return -EINVAL;
+	}
+	driver->usb_driver->supports_autosuspend = 1;
 
 	/* Add this device to our list of devices */
 	mutex_lock(&table_lock);

drivers/usb/serial/usb_debug.c

@@ -75,6 +75,7 @@ static struct usb_serial_driver debug_device = {
 		.name =		"debug",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&debug_driver,
 	.num_ports =		1,
 	.bulk_out_size =	USB_DEBUG_MAX_PACKET_SIZE,
 	.break_ctl =		usb_debug_break_ctl,

drivers/usb/storage/unusual_cypress.h

@@ -31,4 +31,9 @@ UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
 		"Cypress ISD-300LP",
 		USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
 
+UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x9999,
+		"Super Top",
+		"USB 2.0  SATA BRIDGE",
+		USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
+
 #endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */

drivers/usb/storage/unusual_devs.h

@@ -1044,6 +1044,15 @@ UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BULK32),
 
+/* Reported by <ttkspam@free.fr>
+ * The device reports a vendor-specific device class, requiring an
+ * explicit vendor/product match.
+ */
+UNUSUAL_DEV(  0x0851, 0x1542, 0x0002, 0x0002,
+		"MagicPixel",
+		"FW_Omega2",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
+
 /* Andrew Lunn <andrew@lunn.ch>
  * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
  * on LUN 4.
@@ -1872,6 +1881,15 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_READ_DISC_INFO ),
 
+/* Patch by Richard Schtz <r.schtz@t-online.de>
+ * This external hard drive enclosure uses a JMicron chip which
+ * needs the US_FL_IGNORE_RESIDUE flag to work properly. */
+UNUSUAL_DEV(  0x1e68, 0x001b, 0x0000, 0x0000,
+		"TrekStor GmbH & Co. KG",
+		"DataStation maxi g.u",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
+
 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
 		"ST",
 		"2A",

include/linux/usb/hcd.h

@@ -112,6 +112,7 @@ struct usb_hcd {
 	/* Flags that get set only during HCD registration or removal. */
 	unsigned		rh_registered:1;/* is root hub registered? */
 	unsigned		rh_pollable:1;	/* may we poll the root hub? */
+	unsigned		msix_enabled:1;	/* driver has MSI-X enabled? */
 
 	/* The next flag is a stopgap, to be removed when all the HCDs
 	 * support the new root-hub polling mechanism. */

include/linux/usb/serial.h

@@ -347,6 +347,9 @@ extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port,
 extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port,
 					unsigned int ch);
 extern int usb_serial_handle_break(struct usb_serial_port *port);
+extern void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
+					 struct tty_struct *tty,
+					 unsigned int status);
 
 
 extern int usb_serial_bus_register(struct usb_serial_driver *device);