Merge tag 'keystone_dts_for_4.9' of...

Merge tag 'keystone_dts_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Merge "ARM: dts: Keystone DTS for 4.9" from Santosh Shilimkar

Add K2G nodes for GPIO, IRQ and Message Manager

* tag 'keystone_dts_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone-k2g: Add Message Manager node
  ARM: dts: keystone-k2g: Add DSP GPIO controller node
  ARM: dts: keystone-k2g: Add keystone IRQ controller node
  ARM: dts: keystone-k2g: Add device state controller node
  ARM: dts: keystone: specify usb mode explicitly

arch/arm/boot/dts/keystone-k2e-evm.dts

@@ -47,18 +47,26 @@ &usb_phy {
 	status = "okay";
 };
 
-&usb {
+&keystone_usb0 {
 	status = "okay";
 };
 
+&usb0 {
+	dr_mode = "host";
+};
+
 &usb1_phy {
 	status = "okay";
 };
 
-&usb1 {
+&keystone_usb1 {
 	status = "okay";
 };
 
+&usb1 {
+	dr_mode = "peripheral";
+};
+
 &i2c0 {
 	dtt@50 {
 		compatible = "at,24c1024";

arch/arm/boot/dts/keystone-k2e.dtsi

@@ -61,7 +61,7 @@ usb1_phy: usb_phy@2620750 {
 			status = "disabled";
 		};
 
-		usb1: usb@25000000 {
+		keystone_usb1: usb@25000000 {
 			compatible = "ti,keystone-dwc3";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -74,7 +74,7 @@ usb1: usb@25000000 {
 			dma-ranges;
 			status = "disabled";
 
-			dwc3@25010000 {
+			usb1: dwc3@25010000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x25010000 0x70000>;
 				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;

arch/arm/boot/dts/keystone-k2g.dtsi

@@ -83,6 +83,11 @@ k2g_pinctrl: pinmux@02621000 {
 			pinctrl-single,function-mask = <0x001b0007>;
 		};
 
+		devctrl: device-state-control@02620000 {
+			compatible = "ti,keystone-devctrl", "syscon";
+			reg = <0x02620000 0x1000>;
+		};
+
 		uart0: serial@02530c00 {
 			compatible = "ns16550a";
 			current-speed = <115200>;
@@ -93,5 +98,32 @@ uart0: serial@02530c00 {
 			clock-frequency = <200000000>;
 			status = "disabled";
 		};
+
+		kirq0: keystone_irq@026202a0 {
+			compatible = "ti,keystone-irq";
+			interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,syscon-dev = <&devctrl 0x2a0>;
+		};
+
+		dspgpio0: keystone_dsp_gpio@02620240 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x240>;
+		};
+
+		msgmgr: msgmgr@02a00000 {
+			compatible = "ti,k2g-message-manager";
+			#mbox-cells = <2>;
+			reg-names = "queue_proxy_region",
+				    "queue_state_debug_region";
+			reg = <0x02a00000 0x400000>, <0x028c3400 0x400>;
+			interrupt-names = "rx_005",
+					  "rx_057";
+			interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };

arch/arm/boot/dts/keystone-k2hk-evm.dts

@@ -83,10 +83,14 @@ &usb_phy {
 	status = "okay";
 };
 
-&usb {
+&keystone_usb0 {
 	status = "okay";
 };
 
+&usb0 {
+	dr_mode = "host";
+};
+
 &aemif {
 	cs0 {
 		#address-cells = <2>;

arch/arm/boot/dts/keystone-k2l-evm.dts

@@ -32,10 +32,14 @@ &usb_phy {
 	status = "okay";
 };
 
-&usb {
+&keystone_usb0 {
 	status = "okay";
 };
 
+&usb0 {
+	dr_mode = "host";
+};
+
 &i2c0 {
 	dtt@50 {
 		compatible = "at,24c1024";

arch/arm/boot/dts/keystone.dtsi

@@ -188,7 +188,7 @@ usb_phy: usb_phy@2620738 {
 			status = "disabled";
 		};
 
-		usb: usb@2680000 {
+		keystone_usb0: usb@2680000 {
 			compatible = "ti,keystone-dwc3";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -201,7 +201,7 @@ usb: usb@2680000 {
 			dma-ranges;
 			status = "disabled";
 
-			dwc3@2690000 {
+			usb0: dwc3@2690000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x2690000 0x70000>;
 				interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;