Commit cc014f3e authored by Arnd Bergmann's avatar Arnd Bergmann

mmc: sdhci-s3c: remove platform dependencies

plat/regs-sdhci.h is not used anywhere but in the sdhci-s3c
driver, so it can become a local file there and all other
inclusions removed.

plat/sdhci.h is used only to define the platform devices,
and with the exception of the platform_data structure not
needed by the driver, so we can split out the platform_data
definition instead and leave the rest to platform code.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Acked-by: default avatarChris Ball <cjb@laptop.org>
parent f76da510
......@@ -19,8 +19,8 @@
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
......
......@@ -19,7 +19,6 @@
#include <linux/mmc/card.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
......
......@@ -20,7 +20,6 @@
#include <linux/mmc/card.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
......
......@@ -18,62 +18,9 @@
#ifndef __PLAT_S3C_SDHCI_H
#define __PLAT_S3C_SDHCI_H __FILE__
#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <plat/devs.h>
struct platform_device;
struct mmc_host;
struct mmc_card;
struct mmc_ios;
enum cd_types {
S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
S3C_SDHCI_CD_EXTERNAL, /* use external callback */
S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
};
/**
* struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
* @max_width: The maximum number of data bits supported.
* @host_caps: Standard MMC host capabilities bit field.
* @host_caps2: The second standard MMC host capabilities bit field.
* @cd_type: Type of Card Detection method (see cd_types enum above)
* @ext_cd_init: Initialize external card detect subsystem. Called on
* sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
* notify_func argument is a callback to the sdhci-s3c driver
* that triggers the card detection event. Callback arguments:
* dev is pointer to platform device of the host controller,
* state is new state of the card (0 - removed, 1 - inserted).
* @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
* sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
* notify_func argument is the same callback as for ext_cd_init.
* @ext_cd_gpio: gpio pin used for external CD line, valid only if
* cd_type == S3C_SDHCI_CD_GPIO
* @ext_cd_gpio_invert: invert values for external CD gpio line
* @cfg_gpio: Configure the GPIO for a specific card bit-width
*
* Initialisation data specific to either the machine or the platform
* for the device driver to use or call-back when configuring gpio or
* card speed information.
*/
struct s3c_sdhci_platdata {
unsigned int max_width;
unsigned int host_caps;
unsigned int host_caps2;
unsigned int pm_caps;
enum cd_types cd_type;
int ext_cd_gpio;
bool ext_cd_gpio_invert;
int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
int state));
int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
int state));
void (*cfg_gpio)(struct platform_device *dev, int width);
};
/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
* @pd: The default platform data for this device.
* @set: Pointer to the platform data to fill in.
......@@ -378,5 +325,4 @@ static inline void s3c_sdhci_setname(int id, char *name)
break;
}
}
#endif /* __PLAT_S3C_SDHCI_H */
......@@ -180,7 +180,7 @@ config MMC_SDHCI_TEGRA
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
depends on MMC_SDHCI && PLAT_SAMSUNG
depends on MMC_SDHCI && PLAT_SAMSUNG_SINGLE
help
This selects the Secure Digital Host Controller Interface (SDHCI)
often referrered to as the HSMMC block in some of the Samsung S3C
......
......@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/io.h>
......@@ -28,9 +29,7 @@
#include <linux/mmc/host.h>
#include <plat/sdhci.h>
#include <plat/regs-sdhci.h>
#include "sdhci-s3c-regs.h"
#include "sdhci.h"
#define MAX_BUS_CLK (4)
......
#ifndef __PLATFORM_DATA_SDHCI_S3C_H
#define __PLATFORM_DATA_SDHCI_S3C_H
struct platform_device;
enum cd_types {
S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
S3C_SDHCI_CD_EXTERNAL, /* use external callback */
S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
};
/**
* struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
* @max_width: The maximum number of data bits supported.
* @host_caps: Standard MMC host capabilities bit field.
* @host_caps2: The second standard MMC host capabilities bit field.
* @cd_type: Type of Card Detection method (see cd_types enum above)
* @ext_cd_init: Initialize external card detect subsystem. Called on
* sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
* notify_func argument is a callback to the sdhci-s3c driver
* that triggers the card detection event. Callback arguments:
* dev is pointer to platform device of the host controller,
* state is new state of the card (0 - removed, 1 - inserted).
* @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
* sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
* notify_func argument is the same callback as for ext_cd_init.
* @ext_cd_gpio: gpio pin used for external CD line, valid only if
* cd_type == S3C_SDHCI_CD_GPIO
* @ext_cd_gpio_invert: invert values for external CD gpio line
* @cfg_gpio: Configure the GPIO for a specific card bit-width
*
* Initialisation data specific to either the machine or the platform
* for the device driver to use or call-back when configuring gpio or
* card speed information.
*/
struct s3c_sdhci_platdata {
unsigned int max_width;
unsigned int host_caps;
unsigned int host_caps2;
unsigned int pm_caps;
enum cd_types cd_type;
int ext_cd_gpio;
bool ext_cd_gpio_invert;
int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
int state));
int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
int state));
void (*cfg_gpio)(struct platform_device *dev, int width);
};
#endif /* __PLATFORM_DATA_SDHCI_S3C_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment