powerpc/powernv: Update opal.h to add new LPC and XSCOM functions

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/include/asm/opal.h

@@ -124,6 +124,10 @@ extern int opal_enter_rtas(struct rtas_args *args,
 #define OPAL_PCI_POLL				62
 #define OPAL_PCI_MSI_EOI			63
 #define OPAL_PCI_GET_PHB_DIAG_DATA2		64
+#define OPAL_XSCOM_READ				65
+#define OPAL_XSCOM_WRITE			66
+#define OPAL_LPC_READ				67
+#define OPAL_LPC_WRITE				68
 
 #ifndef __ASSEMBLY__
 
@@ -337,6 +341,17 @@ enum OpalEpowStatus {
 	OPAL_EPOW_OVER_INTERNAL_TEMP = 3
 };
 
+/*
+ * Address cycle types for LPC accesses. These also correspond
+ * to the content of the first cell of the "reg" property for
+ * device nodes on the LPC bus
+ */
+enum OpalLPCAddressType {
+	OPAL_LPC_MEM	= 0,
+	OPAL_LPC_IO	= 1,
+	OPAL_LPC_FW	= 2,
+};
+
 struct opal_machine_check_event {
 	enum OpalMCE_Version	version:8;	/* 0x00 */
 	uint8_t			in_use;		/* 0x01 */
@@ -632,6 +647,14 @@ int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe,
 			    uint16_t *pci_error_type, uint16_t *severity);
 int64_t opal_pci_poll(uint64_t phb_id);
 
+int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, uint64_t *val);
+int64_t opal_xscom_write(uint32_t gcid, uint32_t pcb_addr, uint64_t val);
+
+int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type,
+		       uint32_t addr, uint32_t data, uint32_t sz);
+int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type,
+		      uint32_t addr, uint32_t *data, uint32_t sz);
+
 /* Internal functions */
 extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
 

arch/powerpc/platforms/powernv/opal-wrappers.S

@@ -111,3 +111,7 @@ OPAL_CALL(opal_pci_next_error,			OPAL_PCI_NEXT_ERROR);
 OPAL_CALL(opal_pci_poll,			OPAL_PCI_POLL);
 OPAL_CALL(opal_pci_msi_eoi,			OPAL_PCI_MSI_EOI);
 OPAL_CALL(opal_pci_get_phb_diag_data2,		OPAL_PCI_GET_PHB_DIAG_DATA2);
+OPAL_CALL(opal_xscom_read,			OPAL_XSCOM_READ);
+OPAL_CALL(opal_xscom_write,			OPAL_XSCOM_WRITE);
+OPAL_CALL(opal_lpc_read,			OPAL_LPC_READ);
+OPAL_CALL(opal_lpc_write,			OPAL_LPC_WRITE);