Commit cc26b3b0 authored by Syed Mohammed, Khasim's avatar Syed Mohammed, Khasim Committed by Tony Lindgren

ARM: OMAP3: Add minimal omap3430 support

Add minimal omap3430 support based on earlier patches from
Syed Mohammed Khasim. Also merge in omap34xx SRAM support
from Karthik Dasu and use consistent naming for sram init
functions.

Also do following changes that make 34xx support usable:

- Remove unused sram.c functions for 34xx

- Rename IRQ_SIR_IRQ to INTCPS_SIR_IRQ and define it locally
  in entry-macro.S

- Update mach-omap2/io.c to support 2420, 2430, and 34xx

- Also merge in 34xx GPMC changes to add fields wr_access and
  wr_data_mux_bus from Adrian Hunter

- Remove memory initialization call omap2_init_memory() until
  until more generic memory initialization patches are posted.
  It's OK to rely on bootloader initialization until then.
Signed-off-by: default avatarSyed Mohammed, Khasim <khasim@ti.com>
Signed-off-by: Karthik Dasu<karthik-dp@ti.com>
Signed-off-by: default avatarAdrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>


parent 2e7509e5
......@@ -118,6 +118,7 @@ endif
machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
machine-$(CONFIG_ARCH_OMAP3) := omap2
plat-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx
......
......@@ -15,8 +15,17 @@ config ARCH_OMAP2430
bool "OMAP2430 support"
depends on ARCH_OMAP24XX
config ARCH_OMAP34XX
bool "OMAP34xx Based System"
depends on ARCH_OMAP3
config ARCH_OMAP3430
bool "OMAP3430 support"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
select ARCH_OMAP_OTG
comment "OMAP Board Type"
depends on ARCH_OMAP2
depends on ARCH_OMAP2 || ARCH_OMAP3
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
......
......@@ -12,6 +12,7 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
# Functions loaded to SRAM
obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
# Power Management
ifeq ($(CONFIG_PM),y)
......
......@@ -220,6 +220,11 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
if (cpu_is_omap34xx()) {
GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
}
/* caller is expected to have initialized CONFIG1 to cover
* at least sync vs async
*/
......
......@@ -43,7 +43,9 @@
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
static struct map_desc omap2_io_desc[] __initdata = {
#ifdef CONFIG_ARCH_OMAP24XX
static struct map_desc omap24xx_io_desc[] __initdata = {
{
.virtual = L3_24XX_VIRT,
.pfn = __phys_to_pfn(L3_24XX_PHYS),
......@@ -51,12 +53,39 @@ static struct map_desc omap2_io_desc[] __initdata = {
.type = MT_DEVICE
},
{
.virtual = L4_24XX_VIRT,
.pfn = __phys_to_pfn(L4_24XX_PHYS),
.length = L4_24XX_SIZE,
.type = MT_DEVICE
.virtual = L4_24XX_VIRT,
.pfn = __phys_to_pfn(L4_24XX_PHYS),
.length = L4_24XX_SIZE,
.type = MT_DEVICE
},
};
#ifdef CONFIG_ARCH_OMAP2420
static struct map_desc omap242x_io_desc[] __initdata = {
{
.virtual = DSP_MEM_24XX_VIRT,
.pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS),
.length = DSP_MEM_24XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_IPI_24XX_VIRT,
.pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS),
.length = DSP_IPI_24XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_MMU_24XX_VIRT,
.pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS),
.length = DSP_MMU_24XX_SIZE,
.type = MT_DEVICE
},
};
#endif
#ifdef CONFIG_ARCH_OMAP2430
static struct map_desc omap243x_io_desc[] __initdata = {
{
.virtual = L4_WK_243X_VIRT,
.pfn = __phys_to_pfn(L4_WK_243X_PHYS),
......@@ -69,30 +98,90 @@ static struct map_desc omap2_io_desc[] __initdata = {
.length = OMAP243X_GPMC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_SDRC_VIRT,
.pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS),
.length = OMAP243X_SDRC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_SMS_VIRT,
.pfn = __phys_to_pfn(OMAP243X_SMS_PHYS),
.length = OMAP243X_SMS_SIZE,
.type = MT_DEVICE
},
};
#endif
#endif
#ifdef CONFIG_ARCH_OMAP34XX
static struct map_desc omap34xx_io_desc[] __initdata = {
{
.virtual = DSP_MEM_24XX_VIRT,
.pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS),
.length = DSP_MEM_24XX_SIZE,
.virtual = L3_34XX_VIRT,
.pfn = __phys_to_pfn(L3_34XX_PHYS),
.length = L3_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_IPI_24XX_VIRT,
.pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS),
.length = DSP_IPI_24XX_SIZE,
.virtual = L4_34XX_VIRT,
.pfn = __phys_to_pfn(L4_34XX_PHYS),
.length = L4_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_MMU_24XX_VIRT,
.pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS),
.length = DSP_MMU_24XX_SIZE,
.virtual = L4_WK_34XX_VIRT,
.pfn = __phys_to_pfn(L4_WK_34XX_PHYS),
.length = L4_WK_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP34XX_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS),
.length = OMAP34XX_GPMC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP343X_SMS_VIRT,
.pfn = __phys_to_pfn(OMAP343X_SMS_PHYS),
.length = OMAP343X_SMS_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP343X_SDRC_VIRT,
.pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS),
.length = OMAP343X_SDRC_SIZE,
.type = MT_DEVICE
}
},
{
.virtual = L4_PER_34XX_VIRT,
.pfn = __phys_to_pfn(L4_PER_34XX_PHYS),
.length = L4_PER_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_EMU_34XX_VIRT,
.pfn = __phys_to_pfn(L4_EMU_34XX_PHYS),
.length = L4_EMU_34XX_SIZE,
.type = MT_DEVICE
},
};
#endif
void __init omap2_map_common_io(void)
{
iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc));
#if defined(CONFIG_ARCH_OMAP2420)
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
#endif
#if defined(CONFIG_ARCH_OMAP2430)
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
#endif
#if defined(CONFIG_ARCH_OMAP34XX)
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
#endif
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
......@@ -112,11 +201,6 @@ void __init omap2_init_common_hw(void)
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
/*
* Need to Fix this for 2430
*/
#ifndef CONFIG_ARCH_OMAP2430
omap2_init_memory();
#endif
gpmc_init();
}
......@@ -128,6 +128,8 @@ void __init omap_init_irq(void)
if (cpu_is_omap24xx())
bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
else if (cpu_is_omap34xx())
bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
omap_irq_bank_init_one(bank);
......
......@@ -102,6 +102,17 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force)
return prev;
}
#if !defined(CONFIG_ARCH_OMAP2)
void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock)
{
}
void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
u32 mem_type)
{
}
#endif
void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
{
unsigned long dll_cnt;
......@@ -166,6 +177,9 @@ void __init omap2_init_memory(void)
{
u32 l;
if (!cpu_is_omap2420())
return;
l = sms_read_reg(SMS_SYSCONFIG);
l &= ~(0x3 << 3);
l |= (0x2 << 3);
......
......@@ -298,13 +298,13 @@ MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6,
/* TLL - HSUSB: 12-pin TLL Port 1*/
MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de,
......@@ -324,13 +324,13 @@ MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2,
/* TLL - HSUSB: 12-pin TLL Port 2*/
MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa,
......@@ -350,13 +350,13 @@ MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6,
/* TLL - HSUSB: 12-pin TLL Port 3*/
MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184,
......@@ -373,6 +373,49 @@ MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
......
/*
* linux/arch/arm/mach-omap3/sram.S
*
* Omap3 specific functions that need to be run in internal SRAM
*
* (C) Copyright 2007
* Texas Instruments Inc.
* Rajendra Nayak <rnayak@ti.com>
*
* (C) Copyright 2004
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/hardware.h>
#include <mach/io.h>
#include "sdrc.h"
#include "cm.h"
.text
/*
* Change frequency of core dpll
* r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
*/
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
cmp r3, #0x2
blne configure_sdrc
cmp r3, #0x2
blne lock_dll
cmp r3, #0x1
blne unlock_dll
bl sdram_in_selfrefresh @ put the SDRAM in self refresh
bl configure_core_dpll
bl enable_sdrc
cmp r3, #0x1
blne wait_dll_unlock
cmp r3, #0x2
blne wait_dll_lock
cmp r3, #0x1
blne configure_sdrc
mov r0, #0 @ return value
ldmfd sp!, {r1-r12, pc} @ restore regs and return
unlock_dll:
ldr r4, omap3_sdrc_dlla_ctrl
ldr r5, [r4]
orr r5, r5, #0x4
str r5, [r4]
bx lr
lock_dll:
ldr r4, omap3_sdrc_dlla_ctrl
ldr r5, [r4]
bic r5, r5, #0x4
str r5, [r4]
bx lr
sdram_in_selfrefresh:
mov r5, #0x0 @ Move 0 to R5
mcr p15, 0, r5, c7, c10, 5 @ memory barrier
ldr r4, omap3_sdrc_power @ read the SDRC_POWER register
ldr r5, [r4] @ read the contents of SDRC_POWER
orr r5, r5, #0x40 @ enable self refresh on idle req
str r5, [r4] @ write back to SDRC_POWER register
ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
ldr r5, [r4]
bic r5, r5, #0x2 @ disable iclk bit for SRDC
str r5, [r4]
wait_sdrc_idle:
ldr r4, omap3_cm_idlest1_core
ldr r5, [r4]
and r5, r5, #0x2 @ check for SDRC idle
cmp r5, #2
bne wait_sdrc_idle
bx lr
configure_core_dpll:
ldr r4, omap3_cm_clksel1_pll
ldr r5, [r4]
ldr r6, core_m2_mask_val @ modify m2 for core dpll
and r5, r5, r6
orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val
str r5, [r4]
mov r5, #0x800 @ wait for the clock to stabilise
cmp r3, #2
bne wait_clk_stable
bx lr
wait_clk_stable:
subs r5, r5, #1
bne wait_clk_stable
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
bx lr
enable_sdrc:
ldr r4, omap3_cm_iclken1_core
ldr r5, [r4]
orr r5, r5, #0x2 @ enable iclk bit for SDRC
str r5, [r4]
wait_sdrc_idle1:
ldr r4, omap3_cm_idlest1_core
ldr r5, [r4]
and r5, r5, #0x2
cmp r5, #0
bne wait_sdrc_idle1
ldr r4, omap3_sdrc_power
ldr r5, [r4]
bic r5, r5, #0x40
str r5, [r4]
bx lr
wait_dll_lock:
ldr r4, omap3_sdrc_dlla_status
ldr r5, [r4]
and r5, r5, #0x4
cmp r5, #0x4
bne wait_dll_lock
bx lr
wait_dll_unlock:
ldr r4, omap3_sdrc_dlla_status
ldr r5, [r4]
and r5, r5, #0x4
cmp r5, #0x0
bne wait_dll_unlock
bx lr
configure_sdrc:
ldr r4, omap3_sdrc_rfr_ctrl
str r0, [r4]
ldr r4, omap3_sdrc_actim_ctrla
str r1, [r4]
ldr r4, omap3_sdrc_actim_ctrlb
str r2, [r4]
bx lr
omap3_sdrc_power:
.word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
omap3_cm_clksel1_pll:
.word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
omap3_cm_idlest1_core:
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
omap3_cm_iclken1_core:
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
omap3_sdrc_rfr_ctrl:
.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
omap3_sdrc_actim_ctrla:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
omap3_sdrc_actim_ctrlb:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
omap3_sdrc_dlla_status:
.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
omap3_sdrc_dlla_ctrl:
.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
core_m2_mask_val:
.word 0x07FFFFFF
ENTRY(omap3_sram_configure_core_dpll_sz)
.word . - omap3_sram_configure_core_dpll
......@@ -15,6 +15,9 @@ config ARCH_OMAP1
config ARCH_OMAP2
bool "TI OMAP2"
config ARCH_OMAP3
bool "TI OMAP3"
endchoice
comment "OMAP Feature Selections"
......@@ -112,13 +115,13 @@ config OMAP_MPU_TIMER
config OMAP_32K_TIMER
bool "Use 32KHz timer"
depends on ARCH_OMAP16XX || ARCH_OMAP24XX
depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
currently only available for OMAP16XX and 24XX.
currently only available for OMAP16XX, 24XX and 34XX.
endchoice
......@@ -133,7 +136,7 @@ config OMAP_32K_TIMER_HZ
config OMAP_DM_TIMER
bool "Use dual-mode timer"
depends on ARCH_OMAP16XX || ARCH_OMAP24XX
depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
help
Select this option if you want to use OMAP Dual-Mode timers.
......
......@@ -94,6 +94,10 @@ static inline void omap_init_dsp(void) { }
static void omap_init_kp(void)
{
/* 2430 and 34xx keypad is on TWL4030 */
if (cpu_is_omap2430() || cpu_is_omap34xx())
return;
if (machine_is_omap_h2() || machine_is_omap_h3()) {
omap_cfg_reg(F18_1610_KBC0);
omap_cfg_reg(D20_1610_KBC1);
......@@ -395,8 +399,17 @@ static inline void omap_init_uwire(void) {}
#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
#ifdef CONFIG_ARCH_OMAP24XX
#if defined(CONFIG_ARCH_OMAP34XX)
#define OMAP_WDT_BASE 0x48314000
#elif defined(CONFIG_ARCH_OMAP24XX)
#ifdef CONFIG_ARCH_OMAP2430
/* WDT2 */
#define OMAP_WDT_BASE 0x49016000
#else
#define OMAP_WDT_BASE 0x48022000
#endif
#else
#define OMAP_WDT_BASE 0xfffeb000
#endif
......
......@@ -35,6 +35,18 @@
#ifdef CONFIG_OMAP_LL_DEBUG_UART3
add \rx, \rx, #0x00004000 @ UART 3
#endif
#elif CONFIG_ARCH_OMAP3
moveq \rx, #0x48000000 @ physical base address
movne \rx, #0xd8000000 @ virtual base
orr \rx, \rx, #0x0006a000
#ifdef CONFIG_OMAP_LL_DEBUG_UART2
add \rx, \rx, #0x00002000 @ UART 2
#endif
#ifdef CONFIG_OMAP_LL_DEBUG_UART3
add \rx, \rx, #0x00fb0000 @ UART 3
add \rx, \rx, #0x00006000
#endif
#endif
.endm
......
......@@ -55,9 +55,17 @@
1510:
.endm
#elif defined(CONFIG_ARCH_OMAP24XX)
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP24XX)
#include <mach/omap24xx.h>
#endif
#if defined(CONFIG_ARCH_OMAP34XX)
#include <mach/omap34xx.h>
#endif
#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt number */
.macro disable_fiq
.endm
......@@ -79,7 +87,7 @@
ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
cmp \irqnr, #0x0
2222:
ldrne \irqnr, [\base, #IRQ_SIR_IRQ]
ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
.endm
......
......@@ -84,6 +84,10 @@ struct gpmc_timings {
u16 access; /* Start-cycle to first data valid delay */
u16 rd_cycle; /* Total read cycle time */
u16 wr_cycle; /* Total write cycle time */
/* The following are only on OMAP3430 */
u16 wr_access; /* WRACCESSTIME */
u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */
};
extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
......
......@@ -73,7 +73,6 @@
#define L4_24XX_VIRT 0xd8000000
#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
#ifdef CONFIG_ARCH_OMAP2430
#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */
#define L4_WK_243X_VIRT 0xd9000000
#define L4_WK_243X_SIZE SZ_1M
......@@ -87,8 +86,6 @@
#define OMAP243X_SMS_VIRT 0xFC000000
#define OMAP243X_SMS_SIZE SZ_1M
#endif
#define IO_OFFSET 0x90000000
#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
......
......@@ -286,6 +286,41 @@
#define INT_24XX_USB_IRQ_OTG 80
#define INT_24XX_MMC_IRQ 83
#define INT_34XX_BENCH_MPU_EMUL 3
#define INT_34XX_ST_MCBSP2_IRQ 4
#define INT_34XX_ST_MCBSP3_IRQ 5
#define INT_34XX_SSM_ABORT_IRQ 6
#define INT_34XX_SYS_NIRQ 7
#define INT_34XX_D2D_FW_IRQ 8
#define INT_34XX_PRCM_MPU_IRQ 11
#define INT_34XX_MCBSP1_IRQ 16
#define INT_34XX_MCBSP2_IRQ 17
#define INT_34XX_MCBSP3_IRQ 22
#define INT_34XX_MCBSP4_IRQ 23
#define INT_34XX_CAM_IRQ 24
#define INT_34XX_MCBSP5_IRQ 27
#define INT_34XX_GPIO_BANK1 29
#define INT_34XX_GPIO_BANK2 30
#define INT_34XX_GPIO_BANK3 31
#define INT_34XX_GPIO_BANK4 32
#define INT_34XX_GPIO_BANK5 33
#define INT_34XX_GPIO_BANK6 34
#define INT_34XX_USIM_IRQ 35
#define INT_34XX_WDT3_IRQ 36
#define INT_34XX_SPI4_IRQ 48
#define INT_34XX_SHA1MD52_IRQ 49
#define INT_34XX_FPKA_READY_IRQ 50
#define INT_34XX_SHA1MD51_IRQ 51
#define INT_34XX_RNG_IRQ 52
#define INT_34XX_I2C3_IRQ 61
#define INT_34XX_FPKA_ERROR_IRQ 64
#define INT_34XX_PBIAS_IRQ 75
#define INT_34XX_OHCI_IRQ 76
#define INT_34XX_EHCI_IRQ 77
#define INT_34XX_TLL_IRQ 78
#define INT_34XX_PARTHASH_IRQ 79
#define INT_34XX_MMC3_IRQ 94
#define INT_34XX_GPT12_IRQ 95
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
......
......@@ -91,7 +91,7 @@
#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
#elif defined(CONFIG_ARCH_OMAP24XX)
#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define OMAP_MCBSP_REG_DRR2 0x00
#define OMAP_MCBSP_REG_DRR1 0x04
......
......@@ -38,7 +38,7 @@
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET UL(0x10000000)
#elif defined(CONFIG_ARCH_OMAP2)
#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
#define PHYS_OFFSET UL(0x80000000)
#endif
......
......@@ -723,7 +723,31 @@ enum omap34xx_index {
AB12_3430_USB3HS_TLL_DATA4,
AB13_3430_USB3HS_TLL_DATA5,
AA13_3430_USB3HS_TLL_DATA6,
AA12_3430_USB3HS_TLL_DATA7
AA12_3430_USB3HS_TLL_DATA7,
/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
AF10_3430_USB1FS_PHY_MM1_RXDP,
AG9_3430_USB1FS_PHY_MM1_RXDM,
W13_3430_USB1FS_PHY_MM1_RXRCV,
W12_3430_USB1FS_PHY_MM1_TXSE0,
W11_3430_USB1FS_PHY_MM1_TXDAT,
Y11_3430_USB1FS_PHY_MM1_TXEN_N,
/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
AF7_3430_USB2FS_PHY_MM2_RXDP,
AH7_3430_USB2FS_PHY_MM2_RXDM,
AB10_3430_USB2FS_PHY_MM2_RXRCV,
AB9_3430_USB2FS_PHY_MM2_TXSE0,
W3_3430_USB2FS_PHY_MM2_TXDAT,
T4_3430_USB2FS_PHY_MM2_TXEN_N,
/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
AH3_3430_USB3FS_PHY_MM3_RXDP,
AE3_3430_USB3FS_PHY_MM3_RXDM,
AD1_3430_USB3FS_PHY_MM3_RXRCV,
AE1_3430_USB3FS_PHY_MM3_TXSE0,
AD2_3430_USB3FS_PHY_MM3_TXDAT,
AC1_3430_USB3FS_PHY_MM3_TXEN_N,
};
......
......@@ -39,7 +39,6 @@
/* interrupt controller */
#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000)
#define OMAP24XX_IVA_INTC_BASE 0x40000000
#define IRQ_SIR_IRQ 0x0040
#define OMAP2420_CTRL_BASE L4_24XX_BASE
#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000)
......
......@@ -25,8 +25,8 @@
#define SDRC_DLLB_STATUS 0x06C
#define SDRC_POWER 0x070
#define SDRC_MR_0 0x084
#define SDRC_ACTIM_CTRL_A 0x09c
#define SDRC_ACTIM_CTRL_B 0x0a0
#define SDRC_ACTIM_CTRL_A_0 0x09c
#define SDRC_ACTIM_CTRL_B_0 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
/*
......
......@@ -21,6 +21,10 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
u32 mem_type);
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb, u32 m2);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
extern unsigned long omap1_sram_reprogram_clock_sz;
......@@ -53,4 +57,10 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
u32 mem_type);
extern unsigned long omap243x_sram_reprogram_sdrc_sz;
extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb, u32 m2);
extern unsigned long omap3_sram_configure_core_dpll_sz;
#endif
......@@ -40,7 +40,7 @@ static inline void omap1_arch_reset(char mode)
static inline void arch_reset(char mode)
{
if (!cpu_is_omap24xx())
if (!cpu_class_is_omap2())
omap1_arch_reset(mode);
else
omap_prcm_arch_reset(mode);
......
......@@ -47,11 +47,13 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
}
#endif
#ifdef CONFIG_ARCH_OMAP2
if (cpu_class_is_omap2()) {
if (cpu_is_omap24xx()) {
if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE))
return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT);
if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE))
return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
}
if (cpu_is_omap2420()) {
if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE))
return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT);
if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE))
......@@ -59,14 +61,36 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE))
return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT);
}
#ifdef CONFIG_ARCH_OMAP2430
if (cpu_is_omap2430()) {
if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
return XLATE(L4_WK_243X_PHYS, L4_WK_243X_VIRT);
return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT);
if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE))
return XLATE(OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE))
return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT);
if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE))
return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT);
}
#endif
#ifdef CONFIG_ARCH_OMAP3
if (cpu_is_omap34xx()) {
if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE))
return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
if (BETWEEN(p, L4_WK_34XX_PHYS, L4_WK_34XX_SIZE))
return XLATE(p, L4_WK_34XX_PHYS, L4_WK_34XX_VIRT);
if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE))
return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT);
if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE))
return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT);
if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE))
return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT);
if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE))
return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT);
if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE))
return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
}
#endif
return __arm_ioremap(p, size, type);
......
......@@ -271,7 +271,7 @@ int __init omap1_sram_init(void)
#define omap1_sram_init() do {} while (0)
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
#if defined(CONFIG_ARCH_OMAP2)
static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock);
......@@ -352,23 +352,19 @@ static inline int omap243x_sram_init(void)
#ifdef CONFIG_ARCH_OMAP3
static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level);
u32 omap2_sram_reprogram_gpmc(u32 perf_level)
{
if (!_omap2_sram_reprogram_gpmc)
omap_sram_error();
return _omap2_sram_reprogram_gpmc(perf_level);
}
static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n,
u32 freqsel, u32 m2);
u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2)
static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb,
u32 m2);
u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb, u32 m2)
{
if (!_omap2_sram_configure_core_dpll)
if (!_omap3_sram_configure_core_dpll)
omap_sram_error();
return _omap2_sram_configure_core_dpll(m, n, freqsel, m2);
return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
sdrc_actim_ctrla,
sdrc_actim_ctrlb, m2);
}
/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
......@@ -376,31 +372,16 @@ void restore_sram_functions(void)
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
_omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
omap34xx_sram_reprogram_gpmc_sz);
_omap2_sram_configure_core_dpll =
omap_sram_push(omap34xx_sram_configure_core_dpll,
omap34xx_sram_configure_core_dpll_sz);
_omap3_sram_configure_core_dpll =
omap_sram_push(omap3_sram_configure_core_dpll,
omap3_sram_configure_core_dpll_sz);
}
int __init omap34xx_sram_init(void)
{
_omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init,
omap34xx_sram_ddr_init_sz);
_omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc,
omap34xx_sram_reprogram_sdrc_sz);
_omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm,
omap34xx_sram_set_prcm_sz);
_omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
omap34xx_sram_reprogram_gpmc_sz);
_omap2_sram_configure_core_dpll =
omap_sram_push(omap34xx_sram_configure_core_dpll,
omap34xx_sram_configure_core_dpll_sz);
_omap3_sram_configure_core_dpll =
omap_sram_push(omap3_sram_configure_core_dpll,
omap3_sram_configure_core_dpll_sz);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment