Skip to content

L
linux
Commit cce4b2d2 authored by Gavin Shan's avatar Gavin Shan Committed by Benjamin Herrenschmidt
Browse files
Options

powerpc/eeh: Cleanup function names in the EEH core 

The EEH has been implemented on pSeries platform. The original
code looks a little bit nasty. The patch does cleanup on the
current EEH implementation so that it looks more clean.

        * Try adding prefix "eeh" for functions.
        * Some function names have been adjusted so that they looks
          shorter and meaningful.
Signed-off-by: default avatarGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent cb3bc9d0
Hide whitespace changes
Inline Side-by-side
Showing with 59 additions and 63 deletions
arch/powerpc/include/asm/ppc-pci.h
View file @ cce4b2d2
......@@ -58,16 +58,16 @@ struct pci_dev *pci_get_device_by_addr(unsigned long addr);
void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
#define EEH_THAW_MMIO 2
#define EEH_THAW_DMA 3
int rtas_pci_enable(struct pci_dn *pdn, int function);
int rtas_set_slot_reset (struct pci_dn *);
int eeh_pci_enable(struct pci_dn *pdn, int function);
int eeh_reset_pe(struct pci_dn *);
int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs);
void eeh_restore_bars(struct pci_dn *);
void rtas_configure_bridge(struct pci_dn *);
void eeh_configure_bridge(struct pci_dn *);
int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
void eeh_mark_slot(struct device_node *dn, int mode_flag);
void eeh_clear_slot(struct device_node *dn, int mode_flag);
struct device_node *find_device_pe(struct device_node *dn);
struct device_node *eeh_find_device_pe(struct device_node *dn);
void eeh_sysfs_add_device(struct pci_dev *pdev);
void eeh_sysfs_remove_device(struct pci_dev *pdev);
......
arch/powerpc/platforms/pseries/eeh.c
View file @ cce4b2d2
......@@ -130,7 +130,7 @@ static unsigned long slot_resets;
#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE)
/**
* rtas_slot_error_detail - Retrieve error log through RTAS call
* eeh_rtas_slot_error_detail - Retrieve error log through RTAS call
* @pdn: device node
* @severity: temporary or permanent error log
* @driver_log: driver log to be combined with the retrieved error log
......@@ -139,7 +139,7 @@ static unsigned long slot_resets;
* This routine should be called to retrieve error log through the dedicated
* RTAS call.
*/
static void rtas_slot_error_detail(struct pci_dn *pdn, int severity,
static void eeh_rtas_slot_error_detail(struct pci_dn *pdn, int severity,
char *driver_log, size_t loglen)
{
int config_addr;
......@@ -170,7 +170,7 @@ static void rtas_slot_error_detail(struct pci_dn *pdn, int severity,
}
/**
* gather_pci_data - Copy assorted PCI config space registers to buff
* eeh_gather_pci_data - Copy assorted PCI config space registers to buff
* @pdn: device to report data for
* @buf: point to buffer in which to log
* @len: amount of room in buffer
......@@ -178,7 +178,7 @@ static void rtas_slot_error_detail(struct pci_dn *pdn, int severity,
* This routine captures assorted PCI configuration space data,
* and puts them into a buffer for RTAS error logging.
*/
static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
static size_t eeh_gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
{
struct pci_dev *dev = pdn->pcidev;
u32 cfg;
......@@ -258,7 +258,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
for_each_child_of_node(pdn->node, dn) {
pdn = PCI_DN(dn);
if (pdn)
n += gather_pci_data(pdn, buf+n, len-n);
n += eeh_gather_pci_data(pdn, buf+n, len-n);
}
}
......@@ -280,23 +280,23 @@ void eeh_slot_error_detail(struct pci_dn *pdn, int severity)
size_t loglen = 0;
pci_regs_buf[0] = 0;
rtas_pci_enable(pdn, EEH_THAW_MMIO);
rtas_configure_bridge(pdn);
eeh_pci_enable(pdn, EEH_THAW_MMIO);
eeh_configure_bridge(pdn);
eeh_restore_bars(pdn);
loglen = gather_pci_data(pdn, pci_regs_buf, EEH_PCI_REGS_LOG_LEN);
loglen = eeh_gather_pci_data(pdn, pci_regs_buf, EEH_PCI_REGS_LOG_LEN);
rtas_slot_error_detail(pdn, severity, pci_regs_buf, loglen);
eeh_rtas_slot_error_detail(pdn, severity, pci_regs_buf, loglen);
}
/**
* read_slot_reset_state - Read the reset state of a device node's slot
* eeh_read_slot_reset_state - Read the reset state of a device node's slot
* @dn: device node to read
* @rets: array to return results in
*
* Read the reset state of a device node's slot through platform dependent
* function call.
*/
static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
static int eeh_read_slot_reset_state(struct pci_dn *pdn, int rets[])
{
int token, outputs;
int config_addr;
......@@ -332,15 +332,14 @@ static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
* the max allowed wait time is exceeded, in which case
* a -2 is returned.
*/
int
eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs)
int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs)
{
int rc;
int rets[3];
int mwait;
while (1) {
rc = read_slot_reset_state(pdn, rets);
rc = eeh_read_slot_reset_state(pdn, rets);
if (rc) return rc;
if (rets[1] == 0) return -1; /* EEH is not supported */
......@@ -389,12 +388,12 @@ static inline unsigned long eeh_token_to_phys(unsigned long token)
}
/**
* find_device_pe - Retrieve the PE for the given device
* eeh_find_device_pe - Retrieve the PE for the given device
* @dn: device node
*
* Return the PE under which this device lies
*/
struct device_node * find_device_pe(struct device_node *dn)
struct device_node *eeh_find_device_pe(struct device_node *dn)
{
while ((dn->parent) && PCI_DN(dn->parent) &&
(PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
......@@ -445,7 +444,7 @@ static void __eeh_mark_slot(struct device_node *parent, int mode_flag)
void eeh_mark_slot(struct device_node *dn, int mode_flag)
{
struct pci_dev *dev;
dn = find_device_pe(dn);
dn = eeh_find_device_pe(dn);
/* Back up one, since config addrs might be shared */
if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
......@@ -493,7 +492,7 @@ void eeh_clear_slot(struct device_node *dn, int mode_flag)
unsigned long flags;
raw_spin_lock_irqsave(&confirm_error_lock, flags);
dn = find_device_pe(dn);
dn = eeh_find_device_pe(dn);
/* Back up one, since config addrs might be shared */
if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
......@@ -538,7 +537,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
no_dn++;
return 0;
}
dn = find_device_pe(dn);
dn = eeh_find_device_pe(dn);
pdn = PCI_DN(dn);
/* Access to IO BARs might get this far and still not want checking. */
......@@ -585,11 +584,11 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
* function zero of a multi-function device.
* In any case they must share a common PHB.
*/
ret = read_slot_reset_state(pdn, rets);
ret = eeh_read_slot_reset_state(pdn, rets);
/* If the call to firmware failed, punt */
if (ret != 0) {
printk(KERN_WARNING "EEH: read_slot_reset_state() failed; rc=%d dn=%s\n",
printk(KERN_WARNING "EEH: eeh_read_slot_reset_state() failed; rc=%d dn=%s\n",
ret, dn->full_name);
false_positives++;
pdn->eeh_false_positives ++;
......@@ -687,15 +686,14 @@ EXPORT_SYMBOL(eeh_check_failure);
/**
* rtas_pci_enable - Enable MMIO or DMA transfers for this slot
* eeh_pci_enable - Enable MMIO or DMA transfers for this slot
* @pdn pci device node
*
* This routine should be called to reenable frozen MMIO or DMA
* so that it would work correctly again. It's useful while doing
* recovery or log collection on the indicated device.
*/
int
rtas_pci_enable(struct pci_dn *pdn, int function)
int eeh_pci_enable(struct pci_dn *pdn, int function)
{
int config_addr;
int rc;
......@@ -723,7 +721,7 @@ rtas_pci_enable(struct pci_dn *pdn, int function)
}
/**
* rtas_pci_slot_reset - Raises/Lowers the pci #RST line
* eeh_slot_reset - Raises/Lowers the pci #RST line
* @pdn: pci device node
* @state: 1/0 to raise/lower the #RST
*
......@@ -732,8 +730,7 @@ rtas_pci_enable(struct pci_dn *pdn, int function)
* and drops the #RST line if 'state is '0'. This routine is
* safe to call in an interrupt context.
*/
static void
rtas_pci_slot_reset(struct pci_dn *pdn, int state)
static void eeh_slot_reset(struct pci_dn *pdn, int state)
{
int config_addr;
int rc;
......@@ -786,13 +783,13 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
switch (state) {
case pcie_deassert_reset:
rtas_pci_slot_reset(pdn, 0);
eeh_slot_reset(pdn, 0);
break;
case pcie_hot_reset:
rtas_pci_slot_reset(pdn, 1);
eeh_slot_reset(pdn, 1);
break;
case pcie_warm_reset:
rtas_pci_slot_reset(pdn, 3);
eeh_slot_reset(pdn, 3);
break;
default:
return -EINVAL;
......@@ -839,7 +836,7 @@ void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset)
void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset)
{
struct pci_dev *dev;
dn = find_device_pe(dn);
dn = eeh_find_device_pe(dn);
/* Back up one, since config addrs might be shared */
if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
......@@ -853,12 +850,12 @@ void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset)
}
/**
* __rtas_set_slot_reset - Assert the pci #RST line for 1/4 second
* eeh_reset_pe_once - Assert the pci #RST line for 1/4 second
* @pdn: pci device node to be reset.
*
* Assert the PCI #RST line for 1/4 second.
*/
static void __rtas_set_slot_reset(struct pci_dn *pdn)
static void eeh_reset_pe_once(struct pci_dn *pdn)
{
unsigned int freset = 0;
......@@ -871,9 +868,9 @@ static void __rtas_set_slot_reset(struct pci_dn *pdn)
eeh_set_pe_freset(pdn->node, &freset);
if (freset)
rtas_pci_slot_reset(pdn, 3);
eeh_slot_reset(pdn, 3);
else
rtas_pci_slot_reset(pdn, 1);
eeh_slot_reset(pdn, 1);
/* The PCI bus requires that the reset be held high for at least
* a 100 milliseconds. We wait a bit longer 'just in case'.
......@@ -887,7 +884,7 @@ static void __rtas_set_slot_reset(struct pci_dn *pdn)
*/
eeh_clear_slot(pdn->node, EEH_MODE_ISOLATED);
rtas_pci_slot_reset(pdn, 0);
eeh_slot_reset(pdn, 0);
/* After a PCI slot has been reset, the PCI Express spec requires
* a 1.5 second idle time for the bus to stabilize, before starting
......@@ -898,20 +895,20 @@ static void __rtas_set_slot_reset(struct pci_dn *pdn)
}
/**
* rtas_set_slot_reset - Reset the indicated PE
* eeh_reset_pe - Reset the indicated PE
* @pdn: PCI device node
*
* This routine should be called to reset indicated device, including
* PE. A PE might include multiple PCI devices and sometimes PCI bridges
* might be involved as well.
*/
int rtas_set_slot_reset(struct pci_dn *pdn)
int eeh_reset_pe(struct pci_dn *pdn)
{
int i, rc;
/* Take three shots at resetting the bus */
for (i=0; i<3; i++) {
__rtas_set_slot_reset(pdn);
eeh_reset_pe_once(pdn);
rc = eeh_wait_for_slot_status(pdn, PCI_BUS_RESET_WAIT_MSEC);
if (rc == 0)
......@@ -938,14 +935,14 @@ int rtas_set_slot_reset(struct pci_dn *pdn)
*/
/**
* __restore_bars - Restore the Base Address Registers
* eeh_restore_one_device_bars - Restore the Base Address Registers for one device
* @pdn: pci device node
*
* Loads the PCI configuration space base address registers,
* the expansion ROM base address, the latency timer, and etc.
* from the saved values in the device node.
*/
static inline void __restore_bars(struct pci_dn *pdn)
static inline void eeh_restore_one_device_bars(struct pci_dn *pdn)
{
int i;
u32 cmd;
......@@ -999,7 +996,7 @@ void eeh_restore_bars(struct pci_dn *pdn)
return;
if ((pdn->eeh_mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(pdn->class_code))
__restore_bars(pdn);
eeh_restore_one_device_bars(pdn);
for_each_child_of_node(pdn->node, dn)
eeh_restore_bars(PCI_DN(dn));
......@@ -1026,15 +1023,14 @@ static void eeh_save_bars(struct pci_dn *pdn)
}
/**
* rtas_configure_bridge - Configure PCI bridges for the indicated PE
* eeh_configure_bridge - Configure PCI bridges for the indicated PE
* @pdn: PCI device node
*
* PCI bridges might be included in PE. In order to make the PE work
* again. The included PCI bridges should be recovered after the PE
* encounters frozen state.
*/
void
rtas_configure_bridge(struct pci_dn *pdn)
void eeh_configure_bridge(struct pci_dn *pdn)
{
int config_addr;
int rc;
......@@ -1069,7 +1065,7 @@ struct eeh_early_enable_info {
};
/**
* get_pe_addr - Retrieve PE address with given BDF address
* eeh_get_pe_addr - Retrieve PE address with given BDF address
* @config_addr: BDF address
* @info: BUID of the associated PHB
*
......@@ -1079,7 +1075,7 @@ struct eeh_early_enable_info {
* the given BDF address. Further more, we prefer PE address on BDF
* address in EEH core components.
*/
static int get_pe_addr(int config_addr,
static int eeh_get_pe_addr(int config_addr,
struct eeh_early_enable_info *info)
{
unsigned int rets[3];
......@@ -1112,7 +1108,7 @@ static int get_pe_addr(int config_addr,
}
/**
* early_enable_eeh - Early enable EEH on the indicated device
* eeh_early_enable - Early enable EEH on the indicated device
* @dn: device node
* @data: BUID
*
......@@ -1120,7 +1116,7 @@ static int get_pe_addr(int config_addr,
* is expected to be called before real PCI probing is done. However,
* the PHBs have been initialized at this point.
*/
static void *early_enable_eeh(struct device_node *dn, void *data)
static void *eeh_early_enable(struct device_node *dn, void *data)
{
unsigned int rets[3];
struct eeh_early_enable_info *info = data;
......@@ -1170,14 +1166,14 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
/* If the newer, better, ibm,get-config-addr-info is supported,
* then use that instead.
*/
pdn->eeh_pe_config_addr = get_pe_addr(pdn->eeh_config_addr, info);
pdn->eeh_pe_config_addr = eeh_get_pe_addr(pdn->eeh_config_addr, info);
/* Some older systems (Power4) allow the
* ibm,set-eeh-option call to succeed even on nodes
* where EEH is not supported. Verify support
* explicitly.
*/
ret = read_slot_reset_state(pdn, rets);
ret = eeh_read_slot_reset_state(pdn, rets);
if ((ret == 0) && (rets[1] == 1))
enable = 1;
}
......@@ -1272,7 +1268,7 @@ void __init eeh_init(void)
info.buid_lo = BUID_LO(buid);
info.buid_hi = BUID_HI(buid);
traverse_pci_devices(phb, early_enable_eeh, &info);
traverse_pci_devices(phb, eeh_early_enable, &info);
}
if (eeh_subsystem_enabled)
......@@ -1308,7 +1304,7 @@ static void eeh_add_device_early(struct device_node *dn)
info.buid_hi = BUID_HI(phb->buid);
info.buid_lo = BUID_LO(phb->buid);
early_enable_eeh(dn, &info);
eeh_early_enable(dn, &info);
}
/**
......
arch/powerpc/platforms/pseries/eeh_driver.c
View file @ cce4b2d2
......@@ -282,7 +282,7 @@ static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus)
/* Reset the pci controller. (Asserts RST#; resets config space).
* Reconfigure bridges and devices. Don't try to bring the system
* up if the reset failed for some reason. */
rc = rtas_set_slot_reset(pe_dn);
rc = eeh_reset_pe(pe_dn);
if (rc)
return rc;
......@@ -295,7 +295,7 @@ static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus)
struct pci_dn *ppe = PCI_DN(dn);
/* On Power4, always true because eeh_pe_config_addr=0 */
if (pe_dn->eeh_pe_config_addr == ppe->eeh_pe_config_addr) {
rtas_configure_bridge(ppe);
eeh_configure_bridge(ppe);
eeh_restore_bars(ppe);
}
dn = dn->sibling;
......@@ -330,7 +330,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
enum pci_ers_result result = PCI_ERS_RESULT_NONE;
const char *location, *pci_str, *drv_str, *bus_pci_str, *bus_drv_str;
frozen_dn = find_device_pe(event->dn);
frozen_dn = eeh_find_device_pe(event->dn);
if (!frozen_dn) {
location = of_get_property(event->dn, "ibm,loc-code", NULL);
......@@ -422,7 +422,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
/* If all devices reported they can proceed, then re-enable MMIO */
if (result == PCI_ERS_RESULT_CAN_RECOVER) {
rc = rtas_pci_enable(frozen_pdn, EEH_THAW_MMIO);
rc = eeh_pci_enable(frozen_pdn, EEH_THAW_MMIO);
if (rc < 0)
goto hard_fail;
......@@ -436,7 +436,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
/* If all devices reported they can proceed, then re-enable DMA */
if (result == PCI_ERS_RESULT_CAN_RECOVER) {
rc = rtas_pci_enable(frozen_pdn, EEH_THAW_DMA);
rc = eeh_pci_enable(frozen_pdn, EEH_THAW_DMA);
if (rc < 0)
goto hard_fail;
......
arch/powerpc/platforms/pseries/msi.c
View file @ cce4b2d2
......@@ -217,7 +217,7 @@ static struct device_node *find_pe_dn(struct pci_dev *dev, int *total)
if (!dn)
return NULL;
dn = find_device_pe(dn);
dn = eeh_find_device_pe(dn);
if (!dn)
return NULL;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7