arm64: dts: qcom: sm6350: add debug uart

Add the necessary nodes for the debug uart on SM6350.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007212444.328034-8-luca@z3ntu.xyz

arch/arm64/boot/dts/qcom/sm6350.dtsi

@@ -443,6 +443,30 @@ opp-384000000 {
 			};
 		};
 
+		qupv3_id_1: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x9c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x4c3 0x0>;
+			ranges;
+			status = "disabled";
+
+			uart2: serial@98c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x98c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -670,6 +694,13 @@ tlmm: pinctrl@f100000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 157>;
+
+			qup_uart2_default: qup-uart2-default {
+				pins = "gpio25", "gpio26";
+				function = "qup13_f2";
+				drive-strength = <2>;
+				bias-disable;
+			};
 		};
 
 		apps_smmu: iommu@15000000 {