Commit cd5b49bc authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  ARM: ux500: update defconfig
  ARM: u300: update defconfig
  ARM: at91: enable additional boards in existing soc defconfig files
  ARM: at91: refresh soc defconfig files for 3.2
  ARM: at91: rename defconfig files appropriately
  ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as module
  ARM: OMAP2+: Remove empty io.h
  ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is defined
  ARM: OMAP: smartreflex: fix IRQ handling bug
  ARM: OMAP: PM: only register TWL with voltage layer when device is present
  ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIs
  arm: mx28: fix bit operation in clock setting
  ARM: imx: export imx_ioremap
  ARM: imx/mm-imx3: conditionally compile i.MX31 and i.MX35 code
  ARM: mx5: Fix checkpatch warnings in cpu-imx5.c
  MAINTAINERS: Add missing directory
  ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35'
  ARM: imx6q: move clock register map to machine_desc.map_io
  ARM: pxa168/gplugd: add the correct SSP device
  ARM: Update mach-types to fix mxs build breakage
  ...
parents 8cd79203 98014be3
......@@ -789,6 +789,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.pengutronix.de/git/imx/linux-2.6.git
F: arch/arm/mach-mx*/
F: arch/arm/mach-imx/
F: arch/arm/plat-mxc/
ARM/FREESCALE IMX51
......@@ -804,6 +805,13 @@ S: Maintained
T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
F: arch/arm/mach-imx/*imx6*
ARM/FREESCALE MXS ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
F: arch/arm/mach-mxs/
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
......
......@@ -38,7 +38,6 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......@@ -52,16 +51,12 @@ CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
......@@ -81,7 +76,6 @@ CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
......@@ -99,7 +93,6 @@ CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
......
......@@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
......@@ -56,7 +55,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -75,18 +73,8 @@ CONFIG_IPV6_TUNNEL=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y
......@@ -108,8 +96,6 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_TCLIB=y
CONFIG_EEPROM_LEGACY=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
......@@ -119,14 +105,23 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_TUN=m
CONFIG_ARM_AT91_ETHER=y
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=y
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
......@@ -139,18 +134,6 @@ CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
......@@ -158,9 +141,9 @@ CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
......@@ -290,7 +273,6 @@ CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
......@@ -335,7 +317,6 @@ CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_SHA1=y
......@@ -12,11 +12,23 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9260=y
CONFIG_ARCH_AT91SAM9260_SAM9XE=y
CONFIG_MACH_AT91SAM9260EK=y
CONFIG_MACH_CAM60=y
CONFIG_MACH_SAM9_L9260=y
CONFIG_MACH_AFEB9260=y
CONFIG_MACH_USB_A9260=y
CONFIG_MACH_QIL_A9260=y
CONFIG_MACH_CPU9260=y
CONFIG_MACH_FLEXIBITY=y
CONFIG_MACH_SNAPPER_9260=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
......@@ -33,12 +45,10 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
......@@ -55,7 +65,6 @@ CONFIG_I2C_GPIO=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
......@@ -71,7 +80,6 @@ CONFIG_USB_G_SERIAL=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
......
......@@ -14,6 +14,15 @@ CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G20=y
CONFIG_MACH_AT91SAM9G20EK=y
CONFIG_MACH_AT91SAM9G20EK_2MMC=y
CONFIG_MACH_CPU9G20=y
CONFIG_MACH_ACMENETUSFOXG20=y
CONFIG_MACH_PORTUXG20=y
CONFIG_MACH_STAMP9G20=y
CONFIG_MACH_PCONTROL_G20=y
CONFIG_MACH_GSIA18S=y
CONFIG_MACH_USB_A9G20=y
CONFIG_MACH_SNAPPER_9260=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
......@@ -21,9 +30,10 @@ CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -37,8 +47,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......@@ -48,17 +56,13 @@ CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
......@@ -66,15 +70,14 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_HW_RANDOM=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_SPIDEV=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
......@@ -82,7 +85,6 @@ CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_AT73C213=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
......@@ -105,7 +107,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
......
......@@ -18,6 +18,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G45=y
CONFIG_MACH_AT91SAM9M10G45EK=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_SLOW_CLOCK=y
CONFIG_AEABI=y
......@@ -73,11 +74,8 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_DAVICOM_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_DAVICOM_PHY=y
CONFIG_LIBERTAS_THINFIRM=m
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AT76C50X_USB=m
......@@ -131,7 +129,6 @@ CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
# CONFIG_HWMON is not set
# CONFIG_MFD_SUPPORT is not set
CONFIG_FB=y
CONFIG_FB_ATMEL=y
CONFIG_FB_UDL=m
......
......@@ -23,8 +23,6 @@ CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......@@ -35,7 +33,6 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=24576
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
......@@ -62,13 +59,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
......
......@@ -287,7 +287,7 @@ CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y
......
......@@ -263,7 +263,7 @@ CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y
......
......@@ -132,7 +132,7 @@ CONFIG_USB_MON=m
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_VBUS_DRAW=500
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_USB_GADGETFS=m
......
......@@ -48,7 +48,6 @@ CONFIG_MACH_SX1=y
CONFIG_MACH_NOKIA770=y
CONFIG_MACH_AMS_DELTA=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
CONFIG_OMAP_ARM_216MHZ=y
CONFIG_OMAP_ARM_195MHZ=y
CONFIG_OMAP_ARM_192MHZ=y
......
......@@ -14,8 +14,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_U300=y
CONFIG_MACH_U300=y
CONFIG_MACH_U300_BS335=y
CONFIG_MACH_U300_DUAL_RAM=y
CONFIG_U300_DEBUG=y
CONFIG_MACH_U300_SPIDUMMY=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
......@@ -26,19 +24,21 @@ CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
CONFIG_CPU_IDLE=y
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
# CONFIG_SUSPEND is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSMC=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_HWMON is not set
......@@ -51,6 +51,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_CLKGATE=y
CONFIG_MMC_ARMMMCI=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
......@@ -65,10 +66,8 @@ CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_CRC32 is not set
......@@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_U8500=y
CONFIG_UX500_SOC_DB5500=y
CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_U8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
CONFIG_NO_HZ=y
......@@ -24,6 +24,7 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -41,11 +42,8 @@ CONFIG_MISC_DEVICES=y
CONFIG_AB8500_PWM=y
CONFIG_SENSORS_BH1780=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_SMSC911X=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_SMSC_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
......@@ -72,15 +70,12 @@ CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
# CONFIG_HWMON is not set
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
CONFIG_AB5500_CORE=y
CONFIG_AB8500_CORE=y
CONFIG_REGULATOR_AB8500=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_GADGET=y
CONFIG_AB8500_USB=y
CONFIG_MMC=y
......@@ -97,6 +92,7 @@ CONFIG_DMADEVICES=y
CONFIG_STE_DMA40=y
CONFIG_STAGING=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
CONFIG_HSEM_U8500=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
......
......@@ -140,7 +140,7 @@ CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
......
......@@ -12,6 +12,8 @@
#include <linux/init.h>
#include <linux/cpuidle.h>
#include <linux/io.h>
#include <linux/export.h>
#include <linux/time.h>
#include <asm/proc-fns.h>
......
......@@ -22,6 +22,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/smp.h>
#include <asm/cacheflush.h>
#include <asm/unified.h>
......@@ -72,6 +73,9 @@ static void __init highbank_map_io(void)
void highbank_set_cpu_jump(int cpu, void *jump_addr)
{
#ifdef CONFIG_SMP
cpu = cpu_logical_map(cpu);
#endif
writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
......
......@@ -10,11 +10,6 @@ config HAVE_IMX_MMDC
config HAVE_IMX_SRC
bool
#
# ARCH_MX31 and ARCH_MX35 are left for compatibility
# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
# more sensible) names are used: SOC_IMX31 and SOC_IMX35
config ARCH_MX1
bool
......@@ -27,12 +22,6 @@ config ARCH_MX25
config MACH_MX27
bool
config ARCH_MX31
bool
config ARCH_MX35
bool
config SOC_IMX1
bool
select ARCH_MX1
......@@ -72,7 +61,6 @@ config SOC_IMX31
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select ARCH_MXC_AUDMUX_V2
select ARCH_MX31
select MXC_AVIC
select SMP_ON_UP if SMP
......@@ -82,7 +70,6 @@ config SOC_IMX35
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select HAVE_EPIT
select ARCH_MX35
select MXC_AVIC
select SMP_ON_UP if SMP
......
......@@ -1953,14 +1953,17 @@ static struct map_desc imx6q_clock_desc[] = {
imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
};
void __init imx6q_clock_map_io(void)
{
iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
}
int __init mx6q_clocks_init(void)
{
struct device_node *np;
void __iomem *base;
int i, irq;
iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
/* retrieve the freqency of fixed clocks from device tree */
for_each_compatible_node(np, NULL, "fixed-clock") {
u32 rate;
......
......@@ -34,6 +34,7 @@ static void __init imx6q_map_io(void)
{
imx_lluart_map_io();
imx_scu_map_io();
imx6q_clock_map_io();
}
static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
......
......@@ -33,6 +33,8 @@
static void imx3_idle(void)
{
unsigned long reg = 0;
if (!need_resched())
__asm__ __volatile__(
/* disable I and D cache */
"mrc p15, 0, %0, c1, c0, 0\n"
......@@ -56,6 +58,7 @@ static void imx3_idle(void)
"orr %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
: "=r" (reg));
local_irq_enable();
}
static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
......@@ -108,6 +111,7 @@ void imx3_init_l2x0(void)
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
}
#ifdef CONFIG_SOC_IMX31
static struct map_desc mx31_io_desc[] __initdata = {
imx_map_entry(MX31, X_MEMC, MT_DEVICE),
imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
......@@ -126,33 +130,11 @@ void __init mx31_map_io(void)
iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
}
static struct map_desc mx35_io_desc[] __initdata = {
imx_map_entry(MX35, X_MEMC, MT_DEVICE),
imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
};
void __init mx35_map_io(void)
{
iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
}
void __init imx31_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
imx_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
void __init imx35_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
imx_idle = imx3_idle;
pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
......@@ -161,11 +143,6 @@ void __init mx31_init_irq(void)
mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
}
void __init mx35_init_irq(void)
{
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
}
static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
.per_2_per_addr = 1677,
};
......@@ -199,6 +176,35 @@ void __init imx31_soc_init(void)
imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
}
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
static struct map_desc mx35_io_desc[] __initdata = {
imx_map_entry(MX35, X_MEMC, MT_DEVICE),
imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
};
void __init mx35_map_io(void)
{
iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
}
void __init imx35_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
void __init mx35_init_irq(void)
{
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
}
static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
.ap_2_ap_addr = 642,
......@@ -254,3 +260,4 @@ void __init imx35_soc_init(void)
imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
}
#endif /* ifdef CONFIG_SOC_IMX35 */
......@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/smp.h>
#include <asm/unified.h>
#define SRC_SCR 0x000
......@@ -23,10 +24,15 @@
static void __iomem *src_base;
#ifndef CONFIG_SMP
#define cpu_logical_map(cpu) 0
#endif
void imx_enable_cpu(int cpu, bool enable)
{
u32 mask, val;
cpu = cpu_logical_map(cpu);
mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
val = readl_relaxed(src_base + SRC_SCR);
val = enable ? val | mask : val & ~mask;
......@@ -35,6 +41,7 @@ void imx_enable_cpu(int cpu, bool enable)
void imx_set_cpu_jump(int cpu, void *jump_addr)
{
cpu = cpu_logical_map(cpu);
writel_relaxed(BSYM(virt_to_phys(jump_addr)),
src_base + SRC_GPR1 + cpu * 8);
}
......
......@@ -182,7 +182,7 @@ static void __init gplugd_init(void)
/* on-chip devices */
pxa168_add_uart(3);
pxa168_add_ssp(0);
pxa168_add_ssp(1);
pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
pxa168_add_eth(&gplugd_eth_platform_data);
......
......@@ -7,7 +7,7 @@
#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPIO_REG(x) (GPIO_REGS_VIRT + (x))
#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
......
......@@ -16,7 +16,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <asm/io.h>
#include <linux/io.h>
static int mx5_cpu_rev = -1;
......@@ -67,7 +67,8 @@ static int __init mx51_neon_fixup(void)
if (!cpu_is_mx51())
return 0;
if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) {
if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
(elf_hwcap & HWCAP_NEON)) {
elf_hwcap &= ~HWCAP_NEON;
pr_info("Turning off NEON support, detected broken NEON implementation\n");
}
......
......@@ -23,7 +23,9 @@
static void imx5_idle(void)
{
if (!need_resched())
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
local_irq_enable();
}
/*
......@@ -89,7 +91,7 @@ void __init imx51_init_early(void)
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
imx_idle = imx5_idle;
pm_idle = imx5_idle;
}
void __init imx53_init_early(void)
......
......@@ -404,7 +404,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
reg &= ~BM_CLKCTRL_##dr##_DIV; \
reg |= div << BP_CLKCTRL_##dr##_DIV; \
if (reg | (1 << clk->enable_shift)) { \
if (reg & (1 << clk->enable_shift)) { \
pr_err("%s: clock is gated\n", __func__); \
return -EINVAL; \
} \
......
......@@ -171,14 +171,6 @@ config MACH_OMAP_GENERIC
comment "OMAP CPU Speed"
depends on ARCH_OMAP1
config OMAP_CLOCKS_SET_BY_BOOTLOADER
bool "OMAP clocks set by bootloader"
depends on ARCH_OMAP1
help
Enable this option to prevent the kernel from overriding the clock
frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
internal LCD controller and MPU peripherals.
config OMAP_ARM_216MHZ
bool "OMAP ARM 216 MHz CPU (1710 only)"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
......
......@@ -302,8 +302,6 @@ static void __init ams_delta_init(void)
omap_cfg_reg(J19_1610_CAM_D6);
omap_cfg_reg(J18_1610_CAM_D7);
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
omap_board_config = ams_delta_config;
omap_board_config_size = ARRAY_SIZE(ams_delta_config);
omap_serial_init();
......@@ -373,10 +371,16 @@ static int __init ams_delta_modem_init(void)
}
arch_initcall(ams_delta_modem_init);
static void __init ams_delta_map_io(void)
{
omap15xx_map_io();
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
}
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.map_io = ams_delta_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
......
......@@ -17,7 +17,8 @@
#include <plat/clock.h>
extern int __init omap1_clk_init(void);
int omap1_clk_init(void);
void omap1_clk_late_init(void);
extern int omap1_clk_enable(struct clk *clk);
extern void omap1_clk_disable(struct clk *clk);
extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
......
......@@ -767,6 +767,15 @@ static struct clk_functions omap1_clk_functions = {
.clk_disable_unused = omap1_clk_disable_unused,
};
static void __init omap1_show_rates(void)
{
pr_notice("Clocking rate (xtal/DPLL1/MPU): "
"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
}
int __init omap1_clk_init(void)
{
struct omap_clk *c;
......@@ -835,9 +844,12 @@ int __init omap1_clk_init(void)
/* We want to be in syncronous scalable mode */
omap_writew(0x1000, ARM_SYSST);
#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
/* Use values set by bootloader. Determine PLL rate and recalculate
* dependent clocks as if kernel had changed PLL or divisors.
/*
* Initially use the values set by bootloader. Determine PLL rate and
* recalculate dependent clocks as if kernel had changed PLL or
* divisors. See also omap1_clk_late_init() that can reprogram dpll1
* after the SRAM is initialized.
*/
{
unsigned pll_ctl_val = omap_readw(DPLL_CTL);
......@@ -862,25 +874,10 @@ int __init omap1_clk_init(void)
}
}
}
#else
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
printk(KERN_ERR "System frequencies not set. Check your config.\n");
/* Guess sane values (60MHz) */
omap_writew(0x2290, DPLL_CTL);
omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
ck_dpll1.rate = 60000000;
}
#endif
propagate_rate(&ck_dpll1);
/* Cache rates for clocks connected to ck_ref (not dpll1) */
propagate_rate(&ck_ref);
printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
omap1_show_rates();
if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
/* Select slicer output as OMAP input clock */
omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
......@@ -925,3 +922,21 @@ int __init omap1_clk_init(void)
return 0;
}
#define OMAP1_DPLL1_SANE_VALUE 60000000
void __init omap1_clk_late_init(void)
{
if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE)
return;
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
pr_err("System frequencies not set, using default. Check your config.\n");
omap_writew(0x2290, DPLL_CTL);
omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
}
propagate_rate(&ck_dpll1);
omap1_show_rates();
}
......@@ -30,6 +30,8 @@
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>
#include "clock.h"
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
......@@ -293,6 +295,7 @@ static int __init omap1_init_devices(void)
return -ENODEV;
omap_sram_init();
omap1_clk_late_init();
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
......
......@@ -334,6 +334,7 @@ config MACH_OMAP4_PANDA
config OMAP3_EMU
bool "OMAP3 debugging peripherals"
depends on ARCH_OMAP3
select ARM_AMBA
select OC_ETM
help
Say Y here to enable debugging hardware of omap3
......
......@@ -4,7 +4,7 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o
common.o gpio.o dma.o wd_timer.o display.o
omap-2-3-common = irq.o sdrc.o
hwmod-common = omap_hwmod.o \
......@@ -264,7 +264,4 @@ smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
obj-y += $(smsc911x-m) $(smsc911x-y)
obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
disp-$(CONFIG_OMAP2_DSS) := display.o
obj-y += $(disp-m) $(disp-y)
obj-y += common-board-devices.o twl-common.o
......@@ -24,6 +24,7 @@
#include <linux/sched.h>
#include <linux/cpuidle.h>
#include <linux/export.h>
#include <plat/prcm.h>
#include <plat/irqs.h>
......
......@@ -27,8 +27,35 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
#include <plat/common.h>
#include "control.h"
#include "display.h"
#define DISPC_CONTROL 0x0040
#define DISPC_CONTROL2 0x0238
#define DISPC_IRQSTATUS 0x0018
#define DSS_SYSCONFIG 0x10
#define DSS_SYSSTATUS 0x14
#define DSS_CONTROL 0x40
#define DSS_SDI_CONTROL 0x44
#define DSS_PLL_CONTROL 0x48
#define LCD_EN_MASK (0x1 << 0)
#define DIGIT_EN_MASK (0x1 << 1)
#define FRAMEDONE_IRQ_SHIFT 0
#define EVSYNC_EVEN_IRQ_SHIFT 2
#define EVSYNC_ODD_IRQ_SHIFT 3
#define FRAMEDONE2_IRQ_SHIFT 22
#define FRAMEDONETV_IRQ_SHIFT 24
/*
* FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC
* reset before deciding that something has gone wrong
*/
#define FRAMEDONE_IRQ_TIMEOUT 100
static struct platform_device omap_display_device = {
.name = "omapdss",
......@@ -172,3 +199,135 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
return r;
}
static void dispc_disable_outputs(void)
{
u32 v, irq_mask = 0;
bool lcd_en, digit_en, lcd2_en = false;
int i;
struct omap_dss_dispc_dev_attr *da;
struct omap_hwmod *oh;
oh = omap_hwmod_lookup("dss_dispc");
if (!oh) {
WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n");
return;
}
if (!oh->dev_attr) {
pr_err("display: could not disable outputs during reset due to missing dev_attr\n");
return;
}
da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr;
/* store value of LCDENABLE and DIGITENABLE bits */
v = omap_hwmod_read(oh, DISPC_CONTROL);
lcd_en = v & LCD_EN_MASK;
digit_en = v & DIGIT_EN_MASK;
/* store value of LCDENABLE for LCD2 */
if (da->manager_count > 2) {
v = omap_hwmod_read(oh, DISPC_CONTROL2);
lcd2_en = v & LCD_EN_MASK;
}
if (!(lcd_en | digit_en | lcd2_en))
return; /* no managers currently enabled */
/*
* If any manager was enabled, we need to disable it before
* DSS clocks are disabled or DISPC module is reset
*/
if (lcd_en)
irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT;
if (digit_en) {
if (da->has_framedonetv_irq) {
irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT;
} else {
irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT |
1 << EVSYNC_ODD_IRQ_SHIFT;
}
}
if (lcd2_en)
irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT;
/*
* clear any previous FRAMEDONE, FRAMEDONETV,
* EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts
*/
omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS);
/* disable LCD and TV managers */
v = omap_hwmod_read(oh, DISPC_CONTROL);
v &= ~(LCD_EN_MASK | DIGIT_EN_MASK);
omap_hwmod_write(v, oh, DISPC_CONTROL);
/* disable LCD2 manager */
if (da->manager_count > 2) {
v = omap_hwmod_read(oh, DISPC_CONTROL2);
v &= ~LCD_EN_MASK;
omap_hwmod_write(v, oh, DISPC_CONTROL2);
}
i = 0;
while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) !=
irq_mask) {
i++;
if (i > FRAMEDONE_IRQ_TIMEOUT) {
pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n");
break;
}
mdelay(1);
}
}
#define MAX_MODULE_SOFTRESET_WAIT 10000
int omap_dss_reset(struct omap_hwmod *oh)
{
struct omap_hwmod_opt_clk *oc;
int c = 0;
int i, r;
if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) {
pr_err("dss_core: hwmod data doesn't contain reset data\n");
return -EINVAL;
}
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk)
clk_enable(oc->_clk);
dispc_disable_outputs();
/* clear SDI registers */
if (cpu_is_omap3430()) {
omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL);
omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL);
}
/*
* clear DSS_CONTROL register to switch DSS clock sources to
* PRCM clock, if any
*/
omap_hwmod_write(0x0, oh, DSS_CONTROL);
omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
& SYSS_RESETDONE_MASK),
MAX_MODULE_SOFTRESET_WAIT, c);
if (c == MAX_MODULE_SOFTRESET_WAIT)
pr_warning("dss_core: waiting for reset to finish failed\n");
else
pr_debug("dss_core: softreset done\n");
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk)
clk_disable(oc->_clk);
r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
return r;
}
/*
* display.h - OMAP2+ integration-specific DSS header
*
* Copyright (C) 2011 Texas Instruments, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H
#define __ARCH_ARM_MACH_OMAP2_DISPLAY_H
#include <linux/kernel.h>
struct omap_dss_dispc_dev_attr {
u8 manager_count;
bool has_framedonetv_irq;
};
#endif
......@@ -749,7 +749,7 @@ static int _count_mpu_irqs(struct omap_hwmod *oh)
ohii = &oh->mpu_irqs[i++];
} while (ohii->irq != -1);
return i;
return i-1;
}
/**
......@@ -772,7 +772,7 @@ static int _count_sdma_reqs(struct omap_hwmod *oh)
ohdi = &oh->sdma_reqs[i++];
} while (ohdi->dma_req != -1);
return i;
return i-1;
}
/**
......@@ -795,7 +795,7 @@ static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os)
mem = &os->addr[i++];
} while (mem->pa_start != mem->pa_end);
return i;
return i-1;
}
/**
......
......@@ -875,6 +875,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = {
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
/*
* The DSS HW needs all DSS clocks enabled during reset. The dss_core
* driver does not use these clocks.
*/
{ .role = "tv_clk", .clk = "dss_54m_fck" },
{ .role = "sys_clk", .clk = "dss2_fck" },
};
......@@ -899,7 +903,7 @@ static struct omap_hwmod omap2420_dss_core_hwmod = {
.slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves),
.masters = omap2420_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2420_dss_masters),
.flags = HWMOD_NO_IDLEST,
.flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
};
/* l4_core -> dss_dispc */
......@@ -939,6 +943,7 @@ static struct omap_hwmod omap2420_dss_dispc_hwmod = {
.slaves = omap2420_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves),
.flags = HWMOD_NO_IDLEST,
.dev_attr = &omap2_3_dss_dispc_dev_attr
};
/* l4_core -> dss_rfbi */
......@@ -961,6 +966,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = {
&omap2420_l4_core__dss_rfbi,
};
static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
{ .role = "ick", .clk = "dss_ick" },
};
static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
......@@ -972,6 +981,8 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
.module_offs = CORE_MOD,
},
},
.opt_clks = dss_rfbi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap2420_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves),
.flags = HWMOD_NO_IDLEST,
......@@ -981,7 +992,7 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
.master = &omap2420_l4_core_hwmod,
.slave = &omap2420_dss_venc_hwmod,
.clk = "dss_54m_fck",
.clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.fw = {
.omap2 = {
......@@ -1001,7 +1012,7 @@ static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = {
static struct omap_hwmod omap2420_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
.main_clk = "dss1_fck",
.main_clk = "dss_54m_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
......
......@@ -942,6 +942,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = {
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
/*
* The DSS HW needs all DSS clocks enabled during reset. The dss_core
* driver does not use these clocks.
*/
{ .role = "tv_clk", .clk = "dss_54m_fck" },
{ .role = "sys_clk", .clk = "dss2_fck" },
};
......@@ -966,7 +970,7 @@ static struct omap_hwmod omap2430_dss_core_hwmod = {
.slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves),
.masters = omap2430_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2430_dss_masters),
.flags = HWMOD_NO_IDLEST,
.flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
};
/* l4_core -> dss_dispc */
......@@ -1000,6 +1004,7 @@ static struct omap_hwmod omap2430_dss_dispc_hwmod = {
.slaves = omap2430_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves),
.flags = HWMOD_NO_IDLEST,
.dev_attr = &omap2_3_dss_dispc_dev_attr
};
/* l4_core -> dss_rfbi */
......@@ -1016,6 +1021,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = {
&omap2430_l4_core__dss_rfbi,
};
static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
{ .role = "ick", .clk = "dss_ick" },
};
static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
......@@ -1027,6 +1036,8 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
.module_offs = CORE_MOD,
},
},
.opt_clks = dss_rfbi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap2430_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves),
.flags = HWMOD_NO_IDLEST,
......@@ -1036,7 +1047,7 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
.master = &omap2430_l4_core_hwmod,
.slave = &omap2430_dss_venc_hwmod,
.clk = "dss_54m_fck",
.clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
......@@ -1050,7 +1061,7 @@ static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = {
static struct omap_hwmod omap2430_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
.main_clk = "dss1_fck",
.main_clk = "dss_54m_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
......
......@@ -11,6 +11,7 @@
#include <plat/omap_hwmod.h>
#include <plat/serial.h>
#include <plat/dma.h>
#include <plat/common.h>
#include <mach/irqs.h>
......@@ -43,13 +44,15 @@ static struct omap_hwmod_class_sysconfig omap2_dss_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
.sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
SYSS_HAS_RESET_STATUS),
.sysc_fields = &omap_hwmod_sysc_type1,
};
struct omap_hwmod_class omap2_dss_hwmod_class = {
.name = "dss",
.sysc = &omap2_dss_sysc,
.reset = omap_dss_reset,
};
/*
......
......@@ -1369,9 +1369,14 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = {
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
{ .role = "tv_clk", .clk = "dss_tv_fck" },
{ .role = "video_clk", .clk = "dss_96m_fck" },
/*
* The DSS HW needs all DSS clocks enabled during reset. The dss_core
* driver does not use these clocks.
*/
{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
{ .role = "tv_clk", .clk = "dss_tv_fck" },
/* required only on OMAP3430 */
{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
};
static struct omap_hwmod omap3430es1_dss_core_hwmod = {
......@@ -1394,11 +1399,12 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = {
.slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves),
.masters = omap3xxx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
.flags = HWMOD_NO_IDLEST,
.flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
};
static struct omap_hwmod omap3xxx_dss_core_hwmod = {
.name = "dss_core",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.class = &omap2_dss_hwmod_class,
.main_clk = "dss1_alwon_fck", /* instead of dss_fck */
.sdma_reqs = omap3xxx_dss_sdma_chs,
......@@ -1456,6 +1462,7 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
.slaves = omap3xxx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
.flags = HWMOD_NO_IDLEST,
.dev_attr = &omap2_3_dss_dispc_dev_attr
};
/*
......@@ -1486,6 +1493,7 @@ static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = {
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_dsi1_hwmod,
.clk = "dss_ick",
.addr = omap3xxx_dss_dsi1_addrs,
.fw = {
.omap2 = {
......@@ -1502,6 +1510,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = {
&omap3xxx_l4_core__dss_dsi1,
};
static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
};
static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
.name = "dss_dsi1",
.class = &omap3xxx_dsi_hwmod_class,
......@@ -1514,6 +1526,8 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
.module_offs = OMAP3430_DSS_MOD,
},
},
.opt_clks = dss_dsi1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
.slaves = omap3xxx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
.flags = HWMOD_NO_IDLEST,
......@@ -1540,6 +1554,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = {
&omap3xxx_l4_core__dss_rfbi,
};
static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
{ .role = "ick", .clk = "dss_ick" },
};
static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
......@@ -1551,6 +1569,8 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
.module_offs = OMAP3430_DSS_MOD,
},
},
.opt_clks = dss_rfbi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap3xxx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
.flags = HWMOD_NO_IDLEST,
......@@ -1560,7 +1580,7 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_venc_hwmod,
.clk = "dss_tv_fck",
.clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.fw = {
.omap2 = {
......@@ -1578,10 +1598,15 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = {
&omap3xxx_l4_core__dss_venc,
};
static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
/* required only on OMAP3430 */
{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
};
static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
.main_clk = "dss1_alwon_fck",
.main_clk = "dss_tv_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
......@@ -1589,6 +1614,8 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
.module_offs = OMAP3430_DSS_MOD,
},
},
.opt_clks = dss_venc_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks),
.slaves = omap3xxx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves),
.flags = HWMOD_NO_IDLEST,
......
......@@ -30,6 +30,7 @@
#include <plat/mmc.h>
#include <plat/i2c.h>
#include <plat/dmtimer.h>
#include <plat/common.h>
#include "omap_hwmod_common_data.h"
......@@ -1187,6 +1188,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = {
static struct omap_hwmod_class omap44xx_dss_hwmod_class = {
.name = "dss",
.sysc = &omap44xx_dss_sysc,
.reset = omap_dss_reset,
};
/* dss */
......@@ -1240,12 +1242,12 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = {
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss_sys_clk" },
{ .role = "tv_clk", .clk = "dss_tv_clk" },
{ .role = "dss_clk", .clk = "dss_dss_clk" },
{ .role = "video_clk", .clk = "dss_48mhz_clk" },
{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
};
static struct omap_hwmod omap44xx_dss_hwmod = {
.name = "dss_core",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.class = &omap44xx_dss_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
.main_clk = "dss_dss_clk",
......@@ -1325,6 +1327,11 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = {
{ }
};
static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = {
.manager_count = 3,
.has_framedonetv_irq = 1
};
/* l4_per -> dss_dispc */
static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = {
.master = &omap44xx_l4_per_hwmod,
......@@ -1340,12 +1347,6 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = {
&omap44xx_l4_per__dss_dispc,
};
static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss_sys_clk" },
{ .role = "tv_clk", .clk = "dss_tv_clk" },
{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
};
static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap44xx_dispc_hwmod_class,
......@@ -1359,10 +1360,9 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
.opt_clks = dss_dispc_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
.slaves = omap44xx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves),
.dev_attr = &omap44xx_dss_dispc_dev_attr
};
/*
......@@ -1624,7 +1624,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
.clkdm_name = "l3_dss_clkdm",
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.main_clk = "dss_dss_clk",
.main_clk = "dss_48mhz_clk",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
......@@ -1785,7 +1785,7 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap44xx_venc_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
.main_clk = "dss_dss_clk",
.main_clk = "dss_tv_clk",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
......
......@@ -49,3 +49,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
.srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT,
};
struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {
.manager_count = 2,
.has_framedonetv_irq = 0
};
......@@ -16,6 +16,8 @@
#include <plat/omap_hwmod.h>
#include "display.h"
/* Common address space across OMAP2xxx */
extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[];
extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[];
......@@ -111,4 +113,6 @@ extern struct omap_hwmod_class omap2xxx_dma_hwmod_class;
extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
extern struct omap_hwmod_class omap2xxx_mcspi_class;
extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr;
#endif
......@@ -237,7 +237,7 @@ static int __devexit omap4_l3_remove(struct platform_device *pdev)
static const struct of_device_id l3_noc_match[] = {
{.compatible = "ti,omap4-l3-noc", },
{},
}
};
MODULE_DEVICE_TABLE(of, l3_noc_match);
#else
#define l3_noc_match NULL
......
......@@ -24,6 +24,7 @@
#include "powerdomain.h"
#include "clockdomain.h"
#include "pm.h"
#include "twl-common.h"
static struct omap_device_pm_latency *pm_lats;
......@@ -226,11 +227,8 @@ postcore_initcall(omap2_common_pm_init);
static int __init omap2_common_pm_late_init(void)
{
/* Init the OMAP TWL parameters */
omap3_twl_init();
omap4_twl_init();
/* Init the voltage layer */
omap_pmic_late_init();
omap_voltage_late_init();
/* Initialize the voltages */
......
......@@ -139,7 +139,7 @@ static irqreturn_t sr_interrupt(int irq, void *data)
sr_write_reg(sr_info, ERRCONFIG_V1, status);
} else if (sr_info->ip_type == SR_TYPE_V2) {
/* Read the status bits */
sr_read_reg(sr_info, IRQSTATUS);
status = sr_read_reg(sr_info, IRQSTATUS);
/* Clear them by writing back */
sr_write_reg(sr_info, IRQSTATUS, status);
......
......@@ -30,6 +30,7 @@
#include <plat/usb.h>
#include "twl-common.h"
#include "pm.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
......@@ -48,6 +49,16 @@ void __init omap_pmic_init(int bus, u32 clkrate,
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
void __init omap_pmic_late_init(void)
{
/* Init the OMAP TWL parameters (if PMIC has been registerd) */
if (!pmic_i2c_board_info.irq)
return;
omap3_twl_init();
omap4_twl_init();
}
#if defined(CONFIG_ARCH_OMAP3)
static struct twl4030_usb_data omap3_usb_pdata = {
.usb_mode = T2_USB_MODE_ULPI,
......
#ifndef __OMAP_PMIC_COMMON__
#define __OMAP_PMIC_COMMON__
#include <plat/irqs.h>
#define TWL_COMMON_PDATA_USB (1 << 0)
#define TWL_COMMON_PDATA_BCI (1 << 1)
#define TWL_COMMON_PDATA_MADC (1 << 2)
......@@ -30,6 +32,7 @@ struct twl4030_platform_data;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data);
void omap_pmic_late_init(void);
static inline void omap2_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
......
......@@ -307,7 +307,7 @@ static inline void balloon3_mmc_init(void) {}
/******************************************************************************
* USB Gadget
******************************************************************************/
#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
static void balloon3_udc_command(int cmd)
{
if (cmd == PXA2XX_UDC_CMD_CONNECT)
......
......@@ -146,7 +146,7 @@ static void __init colibri_pxa320_init_eth(void)
static inline void __init colibri_pxa320_init_eth(void) {}
#endif /* CONFIG_AX88796 */
#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
.gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96),
.gpio_pullup = -1,
......
......@@ -106,7 +106,7 @@ static void __init gumstix_mmc_init(void)
}
#endif
#ifdef CONFIG_USB_GADGET_PXA25X
#ifdef CONFIG_USB_PXA25X
static struct gpio_vbus_mach_info gumstix_udc_info = {
.gpio_vbus = GPIO_GUMSTIX_USB_GPIOn,
.gpio_pullup = GPIO_GUMSTIX_USB_GPIOx,
......
......@@ -37,8 +37,8 @@ extern void __init palm27x_lcd_init(int power,
#define palm27x_lcd_init(power, mode) do {} while (0)
#endif
#if defined(CONFIG_USB_GADGET_PXA27X) || \
defined(CONFIG_USB_GADGET_PXA27X_MODULE)
#if defined(CONFIG_USB_PXA27X) || \
defined(CONFIG_USB_PXA27X_MODULE)
extern void __init palm27x_udc_init(int vbus, int pullup,
int vbus_inverted);
#else
......
......@@ -164,8 +164,8 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
/******************************************************************************
* USB Gadget
******************************************************************************/
#if defined(CONFIG_USB_GADGET_PXA27X) || \
defined(CONFIG_USB_GADGET_PXA27X_MODULE)
#if defined(CONFIG_USB_PXA27X) || \
defined(CONFIG_USB_PXA27X_MODULE)
static struct gpio_vbus_mach_info palm27x_udc_info = {
.gpio_vbus_inverted = 1,
};
......
......@@ -338,7 +338,7 @@ static inline void palmtc_mkp_init(void) {}
/******************************************************************************
* UDC
******************************************************************************/
#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE)
#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
static struct gpio_vbus_mach_info palmtc_udc_info = {
.gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N,
.gpio_vbus_inverted = 1,
......
......@@ -343,7 +343,7 @@ static inline void vpac270_uhc_init(void) {}
/******************************************************************************
* USB Gadget
******************************************************************************/
#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
.gpio_vbus = GPIO41_VPAC270_UDC_DETECT,
.gpio_pullup = -1,
......
......@@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
......
......@@ -85,7 +85,6 @@ enum mxc_cpu_pwr_mode {
};
extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
extern void (*imx_idle)(void);
extern void imx_print_silicon_rev(const char *cpu, int srev);
void avic_handle_irq(struct pt_regs *);
......@@ -133,4 +132,5 @@ extern void imx53_qsb_common_init(void);
extern void imx53_smd_common_init(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_pm_init(void);
extern void imx6q_clock_map_io(void);
#endif
......@@ -50,20 +50,6 @@
#define IMX_CHIP_REVISION_3_3 0x33
#define IMX_CHIP_REVISION_UNKNOWN 0xff
#define IMX_CHIP_REVISION_1_0_STRING "1.0"
#define IMX_CHIP_REVISION_1_1_STRING "1.1"
#define IMX_CHIP_REVISION_1_2_STRING "1.2"
#define IMX_CHIP_REVISION_1_3_STRING "1.3"
#define IMX_CHIP_REVISION_2_0_STRING "2.0"
#define IMX_CHIP_REVISION_2_1_STRING "2.1"
#define IMX_CHIP_REVISION_2_2_STRING "2.2"
#define IMX_CHIP_REVISION_2_3_STRING "2.3"
#define IMX_CHIP_REVISION_3_0_STRING "3.0"
#define IMX_CHIP_REVISION_3_1_STRING "3.1"
#define IMX_CHIP_REVISION_3_2_STRING "3.2"
#define IMX_CHIP_REVISION_3_3_STRING "3.3"
#define IMX_CHIP_REVISION_UNKNOWN_STRING "unknown"
#ifndef __ASSEMBLY__
extern unsigned int __mxc_cpu_type;
#endif
......
......@@ -17,13 +17,8 @@
#ifndef __ASM_ARCH_MXC_SYSTEM_H__
#define __ASM_ARCH_MXC_SYSTEM_H__
extern void (*imx_idle)(void);
static inline void arch_idle(void)
{
if (imx_idle != NULL)
(imx_idle)();
else
cpu_do_idle();
}
......
......@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/common.h>
......@@ -28,8 +29,8 @@
#include <asm/system.h>
#include <asm/mach-types.h>
void (*imx_idle)(void) = NULL;
void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
EXPORT_SYMBOL_GPL(imx_ioremap);
static void __iomem *wdog_base;
......
......@@ -165,8 +165,8 @@ struct dpll_data {
u8 auto_recal_bit;
u8 recal_en_bit;
u8 recal_st_bit;
u8 flags;
# endif
u8 flags;
};
#endif
......
......@@ -30,6 +30,7 @@
#include <linux/delay.h>
#include <plat/i2c.h>
#include <plat/omap_hwmod.h>
struct sys_timer;
......@@ -55,6 +56,8 @@ void am35xx_init_early(void);
void ti816x_init_early(void);
void omap4430_init_early(void);
extern int omap_dss_reset(struct omap_hwmod *);
void omap_sram_init(void);
/*
......
......@@ -12,7 +12,7 @@
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
......
......@@ -11,6 +11,7 @@
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/export.h>
#include <asm/pgtable.h>
......
......@@ -24,6 +24,8 @@
#ifndef __PLAT_GPIO_CFG_H
#define __PLAT_GPIO_CFG_H __FILE__
#include<linux/types.h>
typedef unsigned int __bitwise__ samsung_gpio_pull_t;
typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
......
......@@ -11,7 +11,7 @@
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
......
......@@ -11,7 +11,7 @@
* the Free Software Foundation; either version 2 of the License.
*/
#include <linux/module.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
......
......@@ -1123,5 +1123,6 @@ blissc MACH_BLISSC BLISSC 3491
thales_adc MACH_THALES_ADC THALES_ADC 3492
ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493
atdgp318 MACH_ATDGP318 ATDGP318 3494
m28evk MACH_M28EVK M28EVK 3613
smdk4212 MACH_SMDK4212 SMDK4212 3638
smdk4412 MACH_SMDK4412 SMDK4412 3765
......@@ -307,15 +307,8 @@ struct omap_dss_board_info {
void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask);
};
#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS)
/* Init with the board info */
extern int omap_display_init(struct omap_dss_board_info *board_data);
#else
static inline int omap_display_init(struct omap_dss_board_info *board_data)
{
return 0;
}
#endif
struct omap_display_platform_data {
struct omap_dss_board_info *board_data;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment