Merge bk://bk.arm.linux.org.uk/linux-2.6-rmk

into ppc970.osdl.org:/home/torvalds/v2.6/linux

arch/arm/common/dmabounce.c

@@ -636,7 +636,7 @@ dmabounce_unregister_dev(struct device *dev)
 	}
 
 	if (!list_empty(&device_info->safe_buffers)) {
-		printk(KERN_ERR,
+		printk(KERN_ERR
 			"%s: Removing from dmabounce with pending buffers!\n",
 			dev->bus_id);
 		BUG();

arch/arm/configs/assabet_defconfig

@@ -2,62 +2,95 @@
 # Automatically generated make config: don't edit
 #
 CONFIG_ARM=y
-# CONFIG_EISA is not set
-# CONFIG_SBUS is not set
-# CONFIG_MCA is not set
+CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_GENERIC_BUST_SPINLOCK is not set
-# CONFIG_GENERIC_ISA_DMA is not set
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_OBSOLETE is not set
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 
 #
 # Loadable module support
 #
 CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_KMOD is not set
 
 #
 # System Type
 #
-# CONFIG_ARCH_ARCA5K is not set
+# CONFIG_ARCH_ADIFCC is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_CAMELOT is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
 # CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE_PB is not set
 
 #
-# Archimedes/A5000 Implementations
+# CLPS711X/EP721X Implementations
 #
 
 #
-# Archimedes/A5000 Implementations (select only ONE)
+# Epxa10db
 #
-# CONFIG_ARCH_ARC is not set
-# CONFIG_ARCH_A5K is not set
 
 #
 # Footbridge Implementations
 #
-# CONFIG_ARCH_CATS is not set
-# CONFIG_ARCH_PERSONAL_SERVER is not set
-# CONFIG_ARCH_EBSA285_ADDIN is not set
-# CONFIG_ARCH_EBSA285_HOST is not set
-# CONFIG_ARCH_NETWINDER is not set
+
+#
+# IOP3xx Implementation Options
+#
+# CONFIG_ARCH_IOP310 is not set
+# CONFIG_ARCH_IOP321 is not set
+
+#
+# IOP3xx Chipset Features
+#
+
+#
+# Intel PXA250/210 Implementations
+#
 
 #
 # SA11x0 Implementations
@@ -67,13 +100,17 @@ CONFIG_SA1100_ASSABET=y
 # CONFIG_SA1100_ADSBITSY is not set
 # CONFIG_SA1100_BRUTUS is not set
 # CONFIG_SA1100_CERF is not set
+# CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_EXTENEX1 is not set
 # CONFIG_SA1100_FLEXANET is not set
 # CONFIG_SA1100_FREEBIRD is not set
 # CONFIG_SA1100_GRAPHICSCLIENT is not set
 # CONFIG_SA1100_GRAPHICSMASTER is not set
+# CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
+# CONFIG_SA1100_HACKKIT is not set
 # CONFIG_SA1100_HUW_WEBPANEL is not set
 # CONFIG_SA1100_ITSY is not set
 # CONFIG_SA1100_LART is not set
@@ -81,80 +118,91 @@ CONFIG_SA1100_ASSABET=y
 # CONFIG_SA1100_OMNIMETER is not set
 # CONFIG_SA1100_PANGOLIN is not set
 # CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_PT_SYSTEM3 is not set
+# CONFIG_SA1100_SHANNON is not set
 # CONFIG_SA1100_SHERMAN is not set
 # CONFIG_SA1100_SIMPAD is not set
 # CONFIG_SA1100_PFS168 is not set
 # CONFIG_SA1100_VICTOR is not set
 # CONFIG_SA1100_XP860 is not set
 # CONFIG_SA1100_YOPY is not set
+# CONFIG_SA1100_STORK is not set
+# CONFIG_SA1100_SSP is not set
 CONFIG_SA1100_USB=m
 CONFIG_SA1100_USB_NETLINK=m
 # CONFIG_SA1100_USB_CHAR is not set
 
 #
-# CLPS711X/EP721X Implementations
+# TI OMAP Implementations
+#
+
+#
+# OMAP Feature Selections
+#
+
+#
+# S3C2410 Implementations
 #
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CLEP7312 is not set
-# CONFIG_ARCH_EDB7211 is not set
-# CONFIG_ARCH_P720T is not set
-# CONFIG_ARCH_EP7211 is not set
-# CONFIG_ARCH_EP7212 is not set
-# CONFIG_ARCH_ACORN is not set
-# CONFIG_FOOTBRIDGE is not set
-# CONFIG_FOOTBRIDGE_HOST is not set
-# CONFIG_FOOTBRIDGE_ADDIN is not set
-CONFIG_CPU_32=y
-# CONFIG_CPU_26 is not set
 
 #
 # Processor Type
 #
-# CONFIG_CPU_32v3 is not set
-CONFIG_CPU_32v4=y
-# CONFIG_CPU_ARM610 is not set
-# CONFIG_CPU_ARM710 is not set
-# CONFIG_CPU_ARM720T is not set
-# CONFIG_CPU_ARM920T is not set
-# CONFIG_CPU_ARM1020 is not set
-# CONFIG_CPU_SA110 is not set
+CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_DISCONTIGMEM=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_TLB_V4WB=y
+CONFIG_CPU_MINICACHE=y
+
+#
+# Processor Features
+#
 
 #
 # General setup
 #
-# CONFIG_PCI is not set
+CONFIG_DISCONTIGMEM=y
 CONFIG_ISA=y
-# CONFIG_ISA_DMA is not set
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CPU_FREQ=y
-CONFIG_HOTPLUG=y
+CONFIG_CPU_FREQ_SA1110=y
+# CONFIG_CPU_FREQ_PROC_INTF is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_24_API=y
 
 #
 # PCMCIA/CardBus support
 #
 CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_DEBUG is not set
 # CONFIG_I82365 is not set
 # CONFIG_TCIC is not set
-# CONFIG_PCMCIA_CLPS6700 is not set
 CONFIG_PCMCIA_SA1100=y
-CONFIG_NET=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
 
 #
 # At least one math emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
 # CONFIG_FPE_FASTFPE is not set
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Generic Driver Options
+#
+# CONFIG_FW_LOADER is not set
 CONFIG_PM=y
+# CONFIG_PREEMPT is not set
+# CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
 CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram"
 CONFIG_LEDS=y
@@ -173,8 +221,9 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-# CONFIG_MTD_BOOTLDR_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
 
 #
@@ -184,6 +233,7 @@ CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -199,35 +249,31 @@ CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_CFI_B1 is not set
 # CONFIG_MTD_CFI_B2 is not set
 CONFIG_MTD_CFI_B4=y
+# CONFIG_MTD_CFI_B8 is not set
 # CONFIG_MTD_CFI_I1 is not set
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
 # CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_AMDSTD is not set
-# CONFIG_MTD_SHARP is not set
-# CONFIG_MTD_JEDEC is not set
 
 #
 # Mapping drivers for chip access
 #
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_NORA is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_CDB89712 is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_DC21285 is not set
-# CONFIG_MTD_IQ80310 is not set
-# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_EDB7312 is not set
 
 #
 # Self-contained MTD device drivers
 #
-# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_BLKMTD is not set
@@ -235,10 +281,9 @@ CONFIG_MTD_SA1100=y
 #
 # Disk-On-Chip Device Drivers
 #
-# CONFIG_MTD_DOC1000 is not set
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOCPROBE is not set
+# CONFIG_MTD_DOC2001PLUS is not set
 
 #
 # NAND Flash Device Drivers
@@ -246,23 +291,17 @@ CONFIG_MTD_SA1100=y
 # CONFIG_MTD_NAND is not set
 
 #
-# Plug and Play configuration
+# Plug and Play support
 #
 # CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_PNPBIOS is not set
 
 #
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_BLK_DEV_DAC960 is not set
 CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -272,44 +311,46 @@ CONFIG_BLK_DEV_INITRD=y
 # Multi-device support (RAID and LVM)
 #
 # CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
 
 #
 # Networking options
 #
 # CONFIG_PACKET is not set
-# CONFIG_NETLINK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_FILTER is not set
+# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 # CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
-# CONFIG_INET_ECN is not set
+# CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
 # CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
-# CONFIG_ATM is not set
+# CONFIG_NETFILTER is not set
 
 #
+# SCTP Configuration (EXPERIMENTAL)
 #
-#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_LLC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -322,29 +363,77 @@ CONFIG_INET=y
 # CONFIG_NET_SCHED is not set
 
 #
-# Network device support
+# Network testing
 #
-CONFIG_NETDEVICES=y
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
 
 #
-# ARCnet devices
+# IrDA protocols
 #
-# CONFIG_ARCNET is not set
+CONFIG_IRLAN=m
+# CONFIG_IRCOMM is not set
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_NSC_FIR is not set
+# CONFIG_WINBOND_FIR is not set
+# CONFIG_TOSHIBA_FIR is not set
+# CONFIG_SMC_IRCC_FIR is not set
+# CONFIG_ALI_FIR is not set
+CONFIG_SA1100_FIR=m
+# CONFIG_VIA_FIR is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-# CONFIG_ARM_AM79C961A is not set
-# CONFIG_SUNLANCE is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNLANCE is not set
-# CONFIG_SUNGEM is not set
+# CONFIG_MII is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
@@ -359,36 +448,20 @@ CONFIG_NET_ETHERNET=y
 #
 # Ethernet (1000 Mbit)
 #
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Ethernet (10000 Mbit)
 #
-# CONFIG_NET_RADIO is not set
 
 #
 # Token Ring devices
 #
 # CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
 
 #
-# Wan interfaces
+# Wireless LAN (non-hamradio)
 #
-# CONFIG_WAN is not set
+# CONFIG_NET_RADIO is not set
 
 #
 # PCMCIA network device support
@@ -401,201 +474,143 @@ CONFIG_PCMCIA_PCNET=y
 # CONFIG_PCMCIA_NMCLAN is not set
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_ARCNET_COM20020_CS is not set
-# CONFIG_PCMCIA_IBMTR is not set
-# CONFIG_NET_PCMCIA_RADIO is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-# CONFIG_IRNET is not set
-# CONFIG_IRCOMM is not set
-# CONFIG_IRDA_ULTRA is not set
-# CONFIG_IRDA_OPTIONS is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
+# CONFIG_PCMCIA_AXNET is not set
 
 #
-# FIR device drivers
+# Wan interfaces
 #
-# CONFIG_USB_IRDA is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VLSI_FIR is not set
-CONFIG_SA1100_FIR=m
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
 
 #
-# ATA/IDE/MFM/RLL support
+# ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
+# CONFIG_IDEDISK_STROKE is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IDE_TASKFILE_IO is not set
 
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
+CONFIG_IDE_GENERIC=y
 # CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
+# CONFIG_BLK_DEV_HD is not set
 
 #
-# SCSI support
+# SCSI device support
 #
 # CONFIG_SCSI is not set
 
 #
-# I2O device support
+# Fusion MPT device support
 #
-# CONFIG_I2O is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
 
 #
-# ISDN subsystem
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_ISDN is not set
+# CONFIG_IEEE1394 is not set
 
 #
-# Input core support
+# I2O device support
 #
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
 
 #
-# Character devices
+# ISDN subsystem
 #
-CONFIG_VT=y
-# CONFIG_VT_CONSOLE is not set
-# CONFIG_SERIAL is not set
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_ISDN is not set
 
 #
-# Serial drivers
+# Input device support
 #
-# CONFIG_SERIAL_AMBA is not set
-# CONFIG_SERIAL_AMBA_CONSOLE is not set
-# CONFIG_SERIAL_CLPS711X is not set
-# CONFIG_SERIAL_CLPS711X_CONSOLE is not set
-# CONFIG_SERIAL_21285 is not set
-# CONFIG_SERIAL_21285_OLD is not set
-# CONFIG_SERIAL_21285_CONSOLE is not set
-# CONFIG_SERIAL_UART00 is not set
-# CONFIG_SERIAL_UART00_CONSOLE is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SA1100_DEFAULT_BAUDRATE=38400
-CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CONSOLE is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_SHARE_IRQ is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=32
+CONFIG_INPUT=y
 
 #
-# I2C support
+# Userland interfaces
 #
-# CONFIG_I2C is not set
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
 
 #
-# L3 serial bus support
+# Input I/O drivers
 #
-CONFIG_L3=y
-CONFIG_L3_ALGOBIT=y
-CONFIG_L3_BIT_SA1100_GPIO=y
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_I8042 is not set
 
 #
-# Other L3 adapters
+# Input Device Drivers
 #
-# CONFIG_L3_SA1111 is not set
-CONFIG_BIT_SA1100_GPIO=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
 
 #
-# Mice
+# Character devices
 #
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
 
 #
-# Joysticks
+# Serial drivers
 #
-# CONFIG_INPUT_GAMEPORT is not set
+CONFIG_SERIAL_8250=m
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
-# Input core support is needed for gameports
+# Non-8250 serial port support
 #
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_QIC02_TAPE is not set
 
 #
-# Input core support is needed for joysticks
+# IPMI
 #
-# CONFIG_QIC02_TAPE is not set
+# CONFIG_IPMI_HANDLER is not set
 
 #
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
 CONFIG_SA1100_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -611,90 +626,117 @@ CONFIG_SA1100_RTC=y
 #
 # PCMCIA character devices
 #
-CONFIG_PCMCIA_SERIAL_CS=m
-# CONFIG_MWAVE is not set
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# L3 serial bus support
+#
+CONFIG_L3=y
+CONFIG_L3_ALGOBIT=y
+CONFIG_L3_BIT_SA1100_GPIO=y
+CONFIG_BIT_SA1100_GPIO=y
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
 
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
 #
 # File systems
 #
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
 # CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
-# CONFIG_CMS_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_NAND is not set
 # CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-# CONFIG_RAMFS is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_FREEVXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
+# CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
 # CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
 # CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
 
 #
 # Network File Systems
 #
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
-# CONFIG_ROOT_NFS is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-CONFIG_SUNRPC=y
 CONFIG_LOCKD=y
+# CONFIG_EXPORTFS is not set
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-# CONFIG_ZLIB_FS_INFLATE is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
@@ -711,15 +753,16 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SOLARIS_X86_PARTITION is not set
 # CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
+# CONFIG_NEC98_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
-# CONFIG_SMB_NLS is not set
-CONFIG_NLS=y
+# CONFIG_EFI_PARTITION is not set
 
 #
 # Native Language Support
 #
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -742,6 +785,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_949 is not set
 # CONFIG_NLS_CODEPAGE_874 is not set
 # CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
@@ -759,67 +803,52 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_UTF8 is not set
 
 #
-# Console drivers
+# Profiling support
 #
-CONFIG_PC_KEYMAP=y
-# CONFIG_VGA_CONSOLE is not set
+# CONFIG_PROFILING is not set
 
 #
-# Frame-buffer support
+# Graphics support
 #
 CONFIG_FB=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FB_ACORN is not set
-# CONFIG_FB_CLPS711X is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FBCON_ADVANCED is not set
-CONFIG_FBCON_CFB2=y
-CONFIG_FBCON_CFB4=y
-CONFIG_FBCON_CFB8=y
-CONFIG_FBCON_CFB16=y
-CONFIG_FBCON_FONTWIDTH8_ONLY=y
-CONFIG_FBCON_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
 
 #
 # Sound
 #
 CONFIG_SOUND=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_MIDI_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
-# CONFIG_MIDI_VIA82CXXX is not set
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
 CONFIG_SOUND_SA1100=y
 CONFIG_SOUND_UDA1341=y
 CONFIG_SOUND_ASSABET_UDA1341=y
-# CONFIG_SOUND_H3600_UDA1341 is not set
-# CONFIG_SOUND_PANGOLIN_UDA1341 is not set
-# CONFIG_SOUND_SA1111_UDA1341 is not set
 # CONFIG_SOUND_SA1100SSP is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_WAVEARTIST is not set
-# CONFIG_SOUND_TVMIXER is not set
+
+#
+# Misc devices
+#
 
 #
 # Multimedia Capabilities Port drivers
@@ -840,123 +869,33 @@ CONFIG_SWITCHES_UCB1X00=y
 #
 # USB support
 #
-# CONFIG_USB is not set
-
-#
-# USB Controllers
-#
-# CONFIG_USB_UHCI is not set
-# CONFIG_USB_UHCI_ALT is not set
-# CONFIG_USB_OHCI is not set
-# CONFIG_USB_OHCI_SA1111 is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# USB Human Interface Devices (HID)
-#
-
-#
-#   Input core support is needed for USB HID
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_DC2XX is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-
-#
-#   Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDCETHER is not set
-# CONFIG_USB_USBNET is not set
 
 #
-# USB port drivers
+# USB Gadget Support
 #
-# CONFIG_USB_USS720 is not set
+# CONFIG_USB_GADGET is not set
 
 #
-# USB Serial Converter support
+# Kernel hacking
 #
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_KERNEL is not set
 
 #
-# USB Miscellaneous drivers
+# Security options
 #
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_ID75 is not set
+# CONFIG_SECURITY is not set
 
 #
-# Bluetooth support
+# Cryptographic options
 #
-# CONFIG_BT is not set
+# CONFIG_CRYPTO is not set
 
 #
-# Kernel hacking
+# Library routines
 #
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_NO_PGT_CACHE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_DC21285_PORT is not set
-# CONFIG_DEBUG_CLPS711X_UART2 is not set
+CONFIG_CRC32=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

arch/arm/configs/epxa10db_defconfig

@@ -3,7 +3,6 @@
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
-CONFIG_SWAP=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 
@@ -11,28 +10,44 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
 
 #
 # General setup
 #
+CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_HOTPLUG is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 
 #
 # Loadable module support
 #
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
 # CONFIG_KMOD is not set
 
 #
 # System Type
 #
 # CONFIG_ARCH_ADIFCC is not set
-# CONFIG_ARCH_ARCA5K is not set
+# CONFIG_ARCH_ANAKIN is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
@@ -41,20 +56,12 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_ARCH_CAMELOT=y
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP310 is not set
+# CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_SHARK is not set
 
-#
-# Archimedes/A5000 Implementations
-#
-
-#
-# Archimedes/A5000 Implementations (select only ONE)
-#
-
 #
 # CLPS711X/EP721X Implementations
 #
@@ -74,11 +81,13 @@ CONFIG_PLD=y
 #
 
 #
-# IOP310 Implementation Options
+# IOP3xx Implementation Options
 #
+# CONFIG_ARCH_IOP310 is not set
+# CONFIG_ARCH_IOP321 is not set
 
 #
-# IOP310 Chipset Features
+# IOP3xx Chipset Features
 #
 
 #
@@ -95,6 +104,10 @@ CONFIG_PLD=y
 CONFIG_CPU_32=y
 CONFIG_CPU_ARM922T=y
 CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
 
 #
 # Processor Features
@@ -108,24 +121,26 @@ CONFIG_CPU_32v4=y
 # General setup
 #
 # CONFIG_ZBOOT_ROM is not set
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-# CONFIG_HOTPLUG is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
 
 #
 # At least one math emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
 # CONFIG_FPE_FASTFPE is not set
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Generic Driver Options
+#
 # CONFIG_PM is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="mem=32M console=ttyUA0,38400 root=/dev/mtdblock0 rw"
+CONFIG_CMDLINE="mem=32M console=ttyUA0,115200 initrd=0x00200000,8M root=/dev/ram0 rw"
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -136,80 +151,22 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 # Memory Technology Devices (MTD)
 #
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_NORA is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_EPXA10DB=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_UCLINUX is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC1000 is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
+# CONFIG_MTD is not set
 
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
 
 #
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
 
 #
 # Multi-device support (RAID and LVM)
@@ -227,26 +184,28 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 # CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_FILTER is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
 # CONFIG_INET_ECN is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
-# CONFIG_XFRM_USER is not set
+# CONFIG_INET_IPCOMP is not set
 # CONFIG_IPV6 is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NETFILTER is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -255,9 +214,9 @@ CONFIG_IPV6_SCTP__=y
 # CONFIG_IP_SCTP is not set
 # CONFIG_ATM is not set
 # CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
 # CONFIG_NET_DIVERT is not set
@@ -280,22 +239,25 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # Ethernet (10 or 100Mbit)
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_ETHER00=m
+# CONFIG_NET_ETHERNET is not set
 
 #
 # Ethernet (1000 Mbit)
 #
+
+#
+# Ethernet (10000 Mbit)
+#
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
 CONFIG_PPP_SYNC_TTY=y
-# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_DEFLATE=y
 # CONFIG_PPP_BSDCOMP is not set
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
@@ -306,7 +268,7 @@ CONFIG_PPP_SYNC_TTY=y
 # CONFIG_NET_RADIO is not set
 
 #
-# Token Ring devices (depends on LLC=y)
+# Token Ring devices
 #
 # CONFIG_SHAPER is not set
 
@@ -315,15 +277,20 @@ CONFIG_PPP_SYNC_TTY=y
 #
 # CONFIG_WAN is not set
 
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
 #
 # IrDA (infrared) support
 #
 # CONFIG_IRDA is not set
 
 #
-# Amateur Radio support
+# Bluetooth support
 #
-# CONFIG_HAMRADIO is not set
+# CONFIG_BT is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -331,43 +298,70 @@ CONFIG_PPP_SYNC_TTY=y
 # CONFIG_IDE is not set
 
 #
-# SCSI support
+# SCSI device support
 #
 # CONFIG_SCSI is not set
 
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
 #
 # I2O device support
 #
-# CONFIG_I2O is not set
 
 #
 # ISDN subsystem
 #
-# CONFIG_ISDN_BOOL is not set
+# CONFIG_ISDN is not set
 
 #
 # Input device support
 #
-# CONFIG_INPUT is not set
+CONFIG_INPUT=y
 
 #
 # Userland interfaces
 #
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
 
 #
 # Input I/O drivers
 #
 # CONFIG_GAMEPORT is not set
 CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
 
 #
 # Input Device Drivers
 #
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Character devices
 #
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -378,31 +372,13 @@ CONFIG_SOUND_GAMEPORT=y
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_DZ is not set
 CONFIG_SERIAL_UART00=y
 CONFIG_SERIAL_UART00_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
 
 #
 # Mice
@@ -434,69 +410,87 @@ CONFIG_UNIX98_PTY_COUNT=256
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
 
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
 #
 # File systems
 #
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_FAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_FAT_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
 # CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_MINIX_FS is not set
 # CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
 # CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
 # CONFIG_QNX4FS_FS is not set
-CONFIG_ROMFS_FS=y
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_XFS_FS is not set
 
 #
 # Network File Systems
 #
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_ROOT_NFS is not set
+# CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-CONFIG_LOCKD=y
 # CONFIG_EXPORTFS is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_SMB_FS is not set
 # CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -504,6 +498,54 @@ CONFIG_LOCKD=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
 #
 # Graphics support
 #
@@ -520,24 +562,14 @@ CONFIG_DUMMY_CONSOLE=y
 # Misc devices
 #
 
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP is not set
-
-#
-# Console Switches
-#
-# CONFIG_SWITCHES is not set
-
 #
 # USB support
 #
 
 #
-# Bluetooth support
+# USB Gadget Support
 #
-# CONFIG_BT is not set
+# CONFIG_USB_GADGET is not set
 
 #
 # Kernel hacking
@@ -560,6 +592,6 @@ CONFIG_FRAME_POINTER=y
 #
 # Library routines
 #
-# CONFIG_CRC32 is not set
+CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y

arch/arm/configs/anakin_defconfig → arch/arm/configs/versatile_defconfig

@@ -2,182 +2,167 @@
 # Automatically generated make config: don't edit
 #
 CONFIG_ARM=y
-# CONFIG_EISA is not set
-# CONFIG_SBUS is not set
-# CONFIG_MCA is not set
+CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_GENERIC_BUST_SPINLOCK is not set
-# CONFIG_GENERIC_ISA_DMA is not set
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
 
 #
 # General setup
 #
-CONFIG_NET=y
-# CONFIG_SYSVIPC is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 
 #
 # Loadable module support
 #
 CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 
 #
 # System Type
 #
 # CONFIG_ARCH_ADIFCC is not set
-CONFIG_ARCH_ANAKIN=y
-# CONFIG_ARCH_ARCA5K is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_CAMELOT is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP310 is not set
+# CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_VERSATILE_PB=y
 
 #
-# Archimedes/A5000 Implementations
+# CLPS711X/EP721X Implementations
 #
 
 #
-# Archimedes/A5000 Implementations (select only ONE)
+# Epxa10db
 #
-# CONFIG_ARCH_ARC is not set
-# CONFIG_ARCH_A5K is not set
 
 #
 # Footbridge Implementations
 #
-# CONFIG_ARCH_CATS is not set
-# CONFIG_ARCH_PERSONAL_SERVER is not set
-# CONFIG_ARCH_EBSA285_ADDIN is not set
-# CONFIG_ARCH_EBSA285_HOST is not set
-# CONFIG_ARCH_NETWINDER is not set
+
+#
+# IOP3xx Implementation Options
+#
+# CONFIG_ARCH_IOP310 is not set
+# CONFIG_ARCH_IOP321 is not set
+
+#
+# IOP3xx Chipset Features
+#
+
+#
+# Intel PXA250/210 Implementations
+#
 
 #
 # SA11x0 Implementations
 #
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_ASSABET_NEPONSET is not set
-# CONFIG_SA1100_ADSBITSY is not set
-# CONFIG_SA1100_BRUTUS is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
-# CONFIG_SA1100_H3XXX is not set
-# CONFIG_SA1100_EXTENEX1 is not set
-# CONFIG_SA1100_FLEXANET is not set
-# CONFIG_SA1100_FREEBIRD is not set
-# CONFIG_SA1100_GRAPHICSCLIENT is not set
-# CONFIG_SA1100_GRAPHICSMASTER is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HUW_WEBPANEL is not set
-# CONFIG_SA1100_ITSY is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_NANOENGINE is not set
-# CONFIG_SA1100_OMNIMETER is not set
-# CONFIG_SA1100_PANGOLIN is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_PT_SYSTEM3 is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SHERMAN is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_PFS168 is not set
-# CONFIG_SA1100_VICTOR is not set
-# CONFIG_SA1100_XP860 is not set
-# CONFIG_SA1100_YOPY is not set
-# CONFIG_SA1100_STORK is not set
-# CONFIG_SA1100_USB is not set
-# CONFIG_SA1100_USB_NETLINK is not set
-# CONFIG_SA1100_USB_CHAR is not set
-# CONFIG_H3600_SLEEVE is not set
 
 #
-# CLPS711X/EP721X Implementations
+# TI OMAP Implementations
+#
+
+#
+# OMAP Feature Selections
+#
+
+#
+# S3C2410 Implementations
 #
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CLEP7312 is not set
-# CONFIG_ARCH_EDB7211 is not set
-# CONFIG_ARCH_P720T is not set
-# CONFIG_ARCH_FORTUNET is not set
-# CONFIG_ARCH_EP7211 is not set
-# CONFIG_ARCH_EP7212 is not set
-# CONFIG_ARCH_ACORN is not set
-# CONFIG_FOOTBRIDGE is not set
-# CONFIG_FOOTBRIDGE_HOST is not set
-# CONFIG_FOOTBRIDGE_ADDIN is not set
-CONFIG_CPU_32=y
-# CONFIG_CPU_26 is not set
 
 #
 # Processor Type
 #
-# CONFIG_CPU_32v3 is not set
-CONFIG_CPU_32v4=y
-# CONFIG_CPU_32v5 is not set
-# CONFIG_CPU_ARM610 is not set
-# CONFIG_CPU_ARM710 is not set
-# CONFIG_CPU_ARM720T is not set
-# CONFIG_CPU_ARM920T is not set
-# CONFIG_CPU_ARM922T is not set
-# CONFIG_CPU_ARM926T is not set
-# CONFIG_CPU_ARM1020 is not set
-CONFIG_CPU_SA110=y
-# CONFIG_CPU_SA1100 is not set
-# CONFIG_CPU_XSCALE is not set
-# CONFIG_XSCALE_PMU is not set
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
 
 #
 # Processor Features
 #
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
 
 #
 # General setup
 #
-# CONFIG_DISCONTIGMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_ISA is not set
-# CONFIG_ISA_DMA is not set
-# CONFIG_FIQ is not set
+CONFIG_ARM_AMBA=y
 # CONFIG_ZBOOT_ROM is not set
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-# CONFIG_HOTPLUG is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+
+#
+# PCMCIA/CardBus support
+#
 # CONFIG_PCMCIA is not set
 
 #
 # At least one math emulation must be selected
 #
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_FASTFPE is not set
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-CONFIG_BINFMT_AOUT=y
+# CONFIG_FPE_NWFPE is not set
+CONFIG_FPE_FASTFPE=y
 CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_PM is not set
+
+#
+# Generic Driver Options
+#
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+CONFIG_PM=y
 # CONFIG_PREEMPT is not set
 # CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="root=/dev/ram initrd=0xc0800000,4M"
+CONFIG_CMDLINE="root=1f03 mem=32M"
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -188,81 +173,132 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 # Memory Technology Devices (MTD)
 #
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
 
 #
-# Plug and Play configuration
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ARM_INTEGRATOR=y
+# CONFIG_MTD_EDB7312 is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Plug and Play support
 #
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_PNPBIOS is not set
 
 #
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 
 #
 # Multi-device support (RAID and LVM)
 #
 # CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_PACKET is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
 # CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_FILTER is not set
 CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
 # CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
 # CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
+# CONFIG_NETFILTER is not set
 
 #
+# SCTP Configuration (EXPERIMENTAL)
 #
-#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_LLC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -275,184 +311,173 @@ CONFIG_INET=y
 # CONFIG_NET_SCHED is not set
 
 #
-# Network device support
+# Network testing
 #
-# CONFIG_NETDEVICES is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# Amateur Radio support
+# Ethernet (10 or 100Mbit)
 #
-# CONFIG_HAMRADIO is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
 
 #
-# IrDA (infrared) support
+# Ethernet (1000 Mbit)
 #
-CONFIG_IRDA=y
 
 #
-# IrDA protocols
+# Ethernet (10000 Mbit)
 #
-# CONFIG_IRLAN is not set
-# CONFIG_IRCOMM is not set
-# CONFIG_IRDA_ULTRA is not set
 
 #
-# IrDA options
+# Token Ring devices
 #
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
 
 #
-# Infrared-port device drivers
+# Wireless LAN (non-hamradio)
 #
+# CONFIG_NET_RADIO is not set
+# CONFIG_HOSTAP is not set
 
 #
-# SIR device drivers
+# Wan interfaces
 #
-CONFIG_IRTTY_SIR=y
-# CONFIG_IRPORT_SIR is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
 
 #
-# Dongle support
+# ATA/ATAPI/MFM/RLL support
 #
-# CONFIG_DONGLE is not set
+# CONFIG_IDE is not set
 
 #
-# FIR device drivers
+# SCSI device support
 #
-# CONFIG_USB_IRDA is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VLSI_FIR is not set
+# CONFIG_SCSI is not set
 
 #
-# ATA/IDE/MFM/RLL support
+# Fusion MPT device support
 #
-# CONFIG_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
-# SCSI support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_SCSI is not set
+# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
 #
-# CONFIG_I2O is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
 
 #
 # ISDN subsystem
 #
-# CONFIG_ISDN_BOOL is not set
+# CONFIG_ISDN is not set
 
 #
 # Input device support
 #
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_TSLIBDEV is not set
 # CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
 # CONFIG_GAMEPORT is not set
 CONFIG_SOUND_GAMEPORT=y
-# CONFIG_GAMEPORT_NS558 is not set
-# CONFIG_GAMEPORT_L4 is not set
-# CONFIG_INPUT_EMU10K1 is not set
-# CONFIG_GAMEPORT_PCIGAME is not set
-# CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461x is not set
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+CONFIG_SERIO_AMBAKMI=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
-# CONFIG_VT_CONSOLE is not set
-# CONFIG_SERIAL_EXTENDED is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SERIAL_8250_CONSOLE is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
+CONFIG_SERIAL_8250_MULTIPORT=y
+CONFIG_SERIAL_8250_RSA=y
 
 #
 # Non-8250 serial port support
 #
-
-#
-# ARM Serial drivers
-#
-# CONFIG_ATOMWIDE_SERIAL is not set
-# CONFIG_DUALSP_SERIAL is not set
-CONFIG_SERIAL_ANAKIN=y
-CONFIG_SERIAL_ANAKIN_CONSOLE=y
-CONFIG_ANAKIN_DEFAULT_BAUDRATE=115200
-# CONFIG_SERIAL_AMBA is not set
-# CONFIG_SERIAL_AMBA_CONSOLE is not set
-# CONFIG_SERIAL_CLPS711X is not set
-# CONFIG_SERIAL_CLPS711X_CONSOLE is not set
-# CONFIG_SERIAL_21285 is not set
-# CONFIG_SERIAL_21285_OLD is not set
-# CONFIG_SERIAL_21285_CONSOLE is not set
-# CONFIG_SERIAL_UART00 is not set
-# CONFIG_SERIAL_UART00_CONSOLE is not set
-# CONFIG_SERIAL_SA1100 is not set
-# CONFIG_SERIAL_SA1100_CONSOLE is not set
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_TOUCHSCREEN_ANAKIN=y
-# CONFIG_UNIX98_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-# CONFIG_L3_ALGOBIT is not set
-# CONFIG_L3_BIT_SA1100_GPIO is not set
-
-#
-# Other L3 adapters
-#
-# CONFIG_L3_SA1111 is not set
-# CONFIG_BIT_SA1100_GPIO is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_QIC02_TAPE is not set
 
 #
-# Mice
+# IPMI
 #
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-# CONFIG_QIC02_TAPE is not set
+# CONFIG_IPMI_HANDLER is not set
 
 #
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -463,134 +488,314 @@ CONFIG_TOUCHSCREEN_ANAKIN=y
 # CONFIG_FTAPE is not set
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_SCx200_ACB is not set
+
+#
+# Hardware Sensors Chip support
+#
+CONFIG_I2C_SENSOR=m
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+
+#
+# Other I2C Chip support
+#
+CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# L3 serial bus support
+#
+# CONFIG_L3 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
 
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_ARMMMCI=m
+
 #
 # File systems
 #
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+CONFIG_MINIX_FS=y
+CONFIG_ROMFS_FS=y
 # CONFIG_QUOTA is not set
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-# CONFIG_QIFACE_COMPAT is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
 # CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_TMPFS is not set
-CONFIG_RAMFS=y
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_MINIX_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_NAND is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
 # CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS is not set
 # CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
 # CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
 
 #
 # Network File Systems
 #
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_V3 is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_LOCKD is not set
-# CONFIG_EXPORTFS is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
 #
-# CONFIG_PARTITION_ADVANCED is not set
-# CONFIG_SMB_NLS is not set
-# CONFIG_NLS is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_NEC98_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+# CONFIG_FB_VIRTUAL is not set
 
 #
-# Console drivers
+# Console display driver support
 #
-CONFIG_PC_KEYMAP=y
 # CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_PCI_CONSOLE=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+CONFIG_FONT_ACORN_8x8=y
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
 
 #
-# Frame-buffer support
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=m
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_ARMAACI=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# Misc devices
 #
-CONFIG_FB=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FB_ACORN is not set
-CONFIG_FB_ANAKIN=y
-# CONFIG_FB_CLPS711X is not set
-# CONFIG_FB_SA1100 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FBCON_ADVANCED is not set
-CONFIG_FBCON_CFB16=y
-# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
-# CONFIG_FBCON_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 
 #
 # Multimedia Capabilities Port drivers
 #
 # CONFIG_MCP is not set
-# CONFIG_MCP_SA1100 is not set
-# CONFIG_MCP_UCB1200 is not set
-# CONFIG_MCP_UCB1200_AUDIO is not set
-# CONFIG_MCP_UCB1200_TS is not set
 
 #
 # Console Switches
@@ -600,12 +805,11 @@ CONFIG_FONT_8x16=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 
 #
-# Bluetooth support
+# USB Gadget Support
 #
-# CONFIG_BT is not set
+# CONFIG_USB_GADGET is not set
 
 #
 # Kernel hacking
@@ -613,20 +817,29 @@ CONFIG_FONT_8x16=y
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_WAITQ is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_DC21285_PORT is not set
-# CONFIG_DEBUG_CLPS711X_UART2 is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
-# CONFIG_CRC32 is not set
-# CONFIG_ZLIB_INFLATE is not set
-# CONFIG_ZLIB_DEFLATE is not set
+CONFIG_CRC32=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

arch/arm/kernel/setup.c

@@ -219,9 +219,7 @@ static inline void dump_cache(const char *prefix, unsigned int cache)
 
 static void __init dump_cpu_info(void)
 {
-	unsigned int info;
-
-	asm("mrc p15, 0, %0, c0, c0, 1" : "=r" (info));
+	unsigned int info = read_cpuid(CPUID_CACHETYPE);
 
 	if (info != processor_id) {
 		printk("CPU: D %s cache\n", cache_types[CACHE_TYPE(info)]);
@@ -803,9 +801,7 @@ static int c_show(struct seq_file *m, void *v)
 	seq_printf(m, "CPU revision\t: %d\n", processor_id & 15);
 
 	{
-		unsigned int cache_info;
-
-		asm("mrc p15, 0, %0, c0, c0, 1" : "=r" (cache_info));
+		unsigned int cache_info = read_cpuid(CPUID_CACHETYPE);
 		if (cache_info != processor_id) {
 			seq_printf(m, "Cache type\t: %s\n"
 				      "Cache clean\t: %s\n"

arch/arm/lib/findbit.S

@@ -40,7 +40,7 @@ ENTRY(_find_first_zero_bit_le)
  */
 ENTRY(_find_next_zero_bit_le)
 		teq	r1, #0
-		beq	2b
+		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		ldrb	r3, [r0, r2, lsr #3]
@@ -74,7 +74,7 @@ ENTRY(_find_first_bit_le)
  */
 ENTRY(_find_next_bit_le)
 		teq	r1, #0
-		beq	2b
+		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		ldrb	r3, [r0, r2, lsr #3]
@@ -101,15 +101,18 @@ ENTRY(_find_first_zero_bit_be)
 		RETINSTR(mov,pc,lr)
 
 ENTRY(_find_next_zero_bit_be)
+		teq	r1, #0
+		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
 		ldrb	r3, [r0, r3, lsr #3]
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
-		orreq	r2, r2, #7		@ if zero, then no bits here
-		addeq	r2, r2, #1		@ align bit pointer
-		beq	2b			@ loop for next bit
+		bne	.found
+		orr	r2, r2, #7		@ if zero, then no bits here
+		add	r2, r2, #1		@ align bit pointer
+		b	2b			@ loop for next bit
 
 ENTRY(_find_first_bit_be)
 		teq	r1, #0
@@ -126,14 +129,17 @@ ENTRY(_find_first_bit_be)
 		RETINSTR(mov,pc,lr)
 
 ENTRY(_find_next_bit_be)
+		teq	r1, #0
+		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
 		ldrb	r3, [r0, r3, lsr #3]
 		movs	r3, r3, lsr ip		@ shift off unused bits
-		orreq	r2, r2, #7		@ if zero, then no bits here
-		addeq	r2, r2, #1		@ align bit pointer
-		beq	2b			@ loop for next bit
+		bne	.found
+		orr	r2, r2, #7		@ if zero, then no bits here
+		add	r2, r2, #1		@ align bit pointer
+		b	2b			@ loop for next bit
 
 #endif
 

arch/arm/mm/Makefile

@@ -3,7 +3,7 @@
 #
 
 obj-y				:= consistent.o extable.o fault-armv.o \
-				   fault-common.o init.o ioremap.o mm-armv.o
+				   fault.o init.o ioremap.o mmap.o mm-armv.o
 
 obj-$(CONFIG_MODULES)		+= proc-syms.o
 

arch/arm/mm/fault-armv.c

@@ -10,124 +10,15 @@
  */
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
 #include <linux/mm.h>
 #include <linux/bitops.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 
 #include <asm/cacheflush.h>
-#include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
-#include "fault.h"
-
-/*
- * Some section permission faults need to be handled gracefully.
- * They can happen due to a __{get,put}_user during an oops.
- */
-static int
-do_sect_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	struct task_struct *tsk = current;
-	do_bad_area(tsk, tsk->active_mm, addr, fsr, regs);
-	return 0;
-}
-
-/*
- * This abort handler always returns "fault".
- */
-static int
-do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	return 1;
-}
-
-static struct fsr_info {
-	int	(*fn)(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
-	int	sig;
-	const char *name;
-} fsr_info[] = {
-	/*
-	 * The following are the standard ARMv3 and ARMv4 aborts.  ARMv5
-	 * defines these to be "precise" aborts.
-	 */
-	{ do_bad,		SIGSEGV, "vector exception"		   },
-	{ do_bad,		SIGILL,	 "alignment exception"		   },
-	{ do_bad,		SIGKILL, "terminal exception"		   },
-	{ do_bad,		SIGILL,	 "alignment exception"		   },
-	{ do_bad,		SIGBUS,	 "external abort on linefetch"	   },
-	{ do_translation_fault,	SIGSEGV, "section translation fault"	   },
-	{ do_bad,		SIGBUS,	 "external abort on linefetch"	   },
-	{ do_page_fault,	SIGSEGV, "page translation fault"	   },
-	{ do_bad,		SIGBUS,	 "external abort on non-linefetch" },
-	{ do_bad,		SIGSEGV, "section domain fault"		   },
-	{ do_bad,		SIGBUS,	 "external abort on non-linefetch" },
-	{ do_bad,		SIGSEGV, "page domain fault"		   },
-	{ do_bad,		SIGBUS,	 "external abort on translation"   },
-	{ do_sect_fault,	SIGSEGV, "section permission fault"	   },
-	{ do_bad,		SIGBUS,	 "external abort on translation"   },
-	{ do_page_fault,	SIGSEGV, "page permission fault"	   },
-	/*
-	 * The following are "imprecise" aborts, which are signalled by bit
-	 * 10 of the FSR, and may not be recoverable.  These are only
-	 * supported if the CPU abort handler supports bit 10.
-	 */
-	{ do_bad,		SIGBUS,  "unknown 16"			   },
-	{ do_bad,		SIGBUS,  "unknown 17"			   },
-	{ do_bad,		SIGBUS,  "unknown 18"			   },
-	{ do_bad,		SIGBUS,  "unknown 19"			   },
-	{ do_bad,		SIGBUS,  "lock abort"			   }, /* xscale */
-	{ do_bad,		SIGBUS,  "unknown 21"			   },
-	{ do_bad,		SIGBUS,  "imprecise external abort"	   }, /* xscale */
-	{ do_bad,		SIGBUS,  "unknown 23"			   },
-	{ do_bad,		SIGBUS,  "dcache parity error"		   }, /* xscale */
-	{ do_bad,		SIGBUS,  "unknown 25"			   },
-	{ do_bad,		SIGBUS,  "unknown 26"			   },
-	{ do_bad,		SIGBUS,  "unknown 27"			   },
-	{ do_bad,		SIGBUS,  "unknown 28"			   },
-	{ do_bad,		SIGBUS,  "unknown 29"			   },
-	{ do_bad,		SIGBUS,  "unknown 30"			   },
-	{ do_bad,		SIGBUS,  "unknown 31"			   }
-};
-
-void __init
-hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
-		int sig, const char *name)
-{
-	if (nr >= 0 && nr < ARRAY_SIZE(fsr_info)) {
-		fsr_info[nr].fn   = fn;
-		fsr_info[nr].sig  = sig;
-		fsr_info[nr].name = name;
-	}
-}
-
-/*
- * Dispatch a data abort to the relevant handler.
- */
-asmlinkage void
-do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6);
-
-	if (!inf->fn(addr, fsr, regs))
-		return;
-
-	printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
-		inf->name, fsr, addr);
-	force_sig(inf->sig, current);
-	show_pte(current->mm, addr);
-	die_if_kernel("Oops", regs, 0);
-}
-
-asmlinkage void
-do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
-{
-	do_translation_fault(addr, 0, regs);
-}
-
 static unsigned long shared_pte_mask = L_PTE_CACHEABLE;
 
 /*

arch/arm/mm/fault-common.c → arch/arm/mm/fault.c

 /*
- *  linux/arch/arm/mm/fault-common.c
+ *  linux/arch/arm/mm/fault.c
  *
  *  Copyright (C) 1995  Linus Torvalds
- *  Modifications for ARM processor (c) 1995-2001 Russell King
+ *  Modifications for ARM processor (c) 1995-2004 Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,11 +11,8 @@
 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/string.h>
 #include <linux/ptrace.h>
 #include <linux/mm.h>
-#include <linux/interrupt.h>
 #include <linux/init.h>
 
 #include <asm/system.h>
@@ -25,20 +22,6 @@
 
 #include "fault.h"
 
-#ifdef CONFIG_CPU_26
-#define FAULT_CODE_WRITE	0x02
-#define FAULT_CODE_FORCECOW	0x01
-#define DO_COW(m)		((m) & (FAULT_CODE_WRITE|FAULT_CODE_FORCECOW))
-#define READ_FAULT(m)		(!((m) & FAULT_CODE_WRITE))
-#else
-/*
- * "code" is actually the FSR register.  Bit 11 set means the
- * instruction was performing a write.
- */
-#define DO_COW(code)		((code) & (1 << 11))
-#define READ_FAULT(code)	(!DO_COW(code))
-#endif
-
 /*
  * This is useful to dump out the page tables associated with
  * 'addr' in mm 'mm'.
@@ -186,10 +169,10 @@ __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 	 * memory access, so we can handle it.
 	 */
 good_area:
-	if (READ_FAULT(fsr)) /* read? */
-		mask = VM_READ|VM_EXEC;
-	else
+	if (fsr & (1 << 11)) /* write? */
 		mask = VM_WRITE;
+	else
+		mask = VM_READ|VM_EXEC;
 
 	fault = VM_FAULT_BADACCESS;
 	if (!(vma->vm_flags & mask))
@@ -201,7 +184,7 @@ __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 	 * than endlessly redo the fault.
 	 */
 survive:
-	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, DO_COW(fsr));
+	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, fsr & (1 << 11));
 
 	/*
 	 * Handle the "normal" cases first - successful and sigbus
@@ -233,7 +216,8 @@ __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 	return fault;
 }
 
-int do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+static int
+do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
 	struct task_struct *tsk;
 	struct mm_struct *mm;
@@ -332,7 +316,8 @@ int do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
  * interrupt or a critical region, and should only copy the information
  * from the master page table, nothing more.
  */
-int do_translation_fault(unsigned long addr, unsigned int fsr,
+static int
+do_translation_fault(unsigned long addr, unsigned int fsr,
 		     struct pt_regs *regs)
 {
 	struct task_struct *tsk;
@@ -372,3 +357,108 @@ int do_translation_fault(unsigned long addr, unsigned int fsr,
 	do_bad_area(tsk, tsk->active_mm, addr, fsr, regs);
 	return 0;
 }
+
+/*
+ * Some section permission faults need to be handled gracefully.
+ * They can happen due to a __{get,put}_user during an oops.
+ */
+static int
+do_sect_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	struct task_struct *tsk = current;
+	do_bad_area(tsk, tsk->active_mm, addr, fsr, regs);
+	return 0;
+}
+
+/*
+ * This abort handler always returns "fault".
+ */
+static int
+do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	return 1;
+}
+
+static struct fsr_info {
+	int	(*fn)(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
+	int	sig;
+	const char *name;
+} fsr_info[] = {
+	/*
+	 * The following are the standard ARMv3 and ARMv4 aborts.  ARMv5
+	 * defines these to be "precise" aborts.
+	 */
+	{ do_bad,		SIGSEGV, "vector exception"		   },
+	{ do_bad,		SIGILL,	 "alignment exception"		   },
+	{ do_bad,		SIGKILL, "terminal exception"		   },
+	{ do_bad,		SIGILL,	 "alignment exception"		   },
+	{ do_bad,		SIGBUS,	 "external abort on linefetch"	   },
+	{ do_translation_fault,	SIGSEGV, "section translation fault"	   },
+	{ do_bad,		SIGBUS,	 "external abort on linefetch"	   },
+	{ do_page_fault,	SIGSEGV, "page translation fault"	   },
+	{ do_bad,		SIGBUS,	 "external abort on non-linefetch" },
+	{ do_bad,		SIGSEGV, "section domain fault"		   },
+	{ do_bad,		SIGBUS,	 "external abort on non-linefetch" },
+	{ do_bad,		SIGSEGV, "page domain fault"		   },
+	{ do_bad,		SIGBUS,	 "external abort on translation"   },
+	{ do_sect_fault,	SIGSEGV, "section permission fault"	   },
+	{ do_bad,		SIGBUS,	 "external abort on translation"   },
+	{ do_page_fault,	SIGSEGV, "page permission fault"	   },
+	/*
+	 * The following are "imprecise" aborts, which are signalled by bit
+	 * 10 of the FSR, and may not be recoverable.  These are only
+	 * supported if the CPU abort handler supports bit 10.
+	 */
+	{ do_bad,		SIGBUS,  "unknown 16"			   },
+	{ do_bad,		SIGBUS,  "unknown 17"			   },
+	{ do_bad,		SIGBUS,  "unknown 18"			   },
+	{ do_bad,		SIGBUS,  "unknown 19"			   },
+	{ do_bad,		SIGBUS,  "lock abort"			   }, /* xscale */
+	{ do_bad,		SIGBUS,  "unknown 21"			   },
+	{ do_bad,		SIGBUS,  "imprecise external abort"	   }, /* xscale */
+	{ do_bad,		SIGBUS,  "unknown 23"			   },
+	{ do_bad,		SIGBUS,  "dcache parity error"		   }, /* xscale */
+	{ do_bad,		SIGBUS,  "unknown 25"			   },
+	{ do_bad,		SIGBUS,  "unknown 26"			   },
+	{ do_bad,		SIGBUS,  "unknown 27"			   },
+	{ do_bad,		SIGBUS,  "unknown 28"			   },
+	{ do_bad,		SIGBUS,  "unknown 29"			   },
+	{ do_bad,		SIGBUS,  "unknown 30"			   },
+	{ do_bad,		SIGBUS,  "unknown 31"			   }
+};
+
+void __init
+hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
+		int sig, const char *name)
+{
+	if (nr >= 0 && nr < ARRAY_SIZE(fsr_info)) {
+		fsr_info[nr].fn   = fn;
+		fsr_info[nr].sig  = sig;
+		fsr_info[nr].name = name;
+	}
+}
+
+/*
+ * Dispatch a data abort to the relevant handler.
+ */
+asmlinkage void
+do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6);
+
+	if (!inf->fn(addr, fsr, regs))
+		return;
+
+	printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
+		inf->name, fsr, addr);
+	force_sig(inf->sig, current);
+	show_pte(current->mm, addr);
+	die_if_kernel("Oops", regs, 0);
+}
+
+asmlinkage void
+do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
+{
+	do_translation_fault(addr, 0, regs);
+}
+

arch/arm/mm/fault.h

@@ -3,8 +3,4 @@ void do_bad_area(struct task_struct *tsk, struct mm_struct *mm,
 
 void show_pte(struct mm_struct *mm, unsigned long addr);
 
-int do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
-
-int do_translation_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
-
 unsigned long search_exception_table(unsigned long addr);

arch/arm/mm/ioremap.c

@@ -28,7 +28,8 @@
 #include <asm/io.h>
 #include <asm/tlbflush.h>
 
-static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
+static inline void
+remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
 	       unsigned long phys_addr, pgprot_t pgprot)
 {
 	unsigned long end;
@@ -37,21 +38,25 @@ static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned l
 	end = address + size;
 	if (end > PMD_SIZE)
 		end = PMD_SIZE;
-	if (address >= end)
-		BUG();
+	BUG_ON(address >= end);
 	do {
-		if (!pte_none(*pte)) {
-			printk("remap_area_pte: page already exists\n");
-			BUG();
-		}
+		if (!pte_none(*pte))
+			goto bad;
+
 		set_pte(pte, pfn_pte(phys_addr >> PAGE_SHIFT, pgprot));
 		address += PAGE_SIZE;
 		phys_addr += PAGE_SIZE;
 		pte++;
 	} while (address && (address < end));
+	return;
+
+ bad:
+	printk("remap_area_pte: page already exists\n");
+	BUG();
 }
 
-static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
+static inline int
+remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
 	       unsigned long phys_addr, unsigned long flags)
 {
 	unsigned long end;
@@ -64,8 +69,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo
 		end = PGDIR_SIZE;
 
 	phys_addr -= address;
-	if (address >= end)
-		BUG();
+	BUG_ON(address >= end);
 
 	pgprot = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_WRITE | flags);
 	do {
@@ -79,35 +83,38 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo
 	return 0;
 }
 
-static int remap_area_pages(unsigned long address, unsigned long phys_addr,
+static int
+remap_area_pages(unsigned long start, unsigned long phys_addr,
 		 unsigned long size, unsigned long flags)
 {
-	int error;
+	unsigned long address = start;
+	unsigned long end = start + size;
+	int err = 0;
 	pgd_t * dir;
-	unsigned long end = address + size;
 
 	phys_addr -= address;
 	dir = pgd_offset(&init_mm, address);
-	flush_cache_all();
-	if (address >= end)
-		BUG();
+	BUG_ON(address >= end);
 	spin_lock(&init_mm.page_table_lock);
 	do {
-		pmd_t *pmd;
-		pmd = pmd_alloc(&init_mm, dir, address);
-		error = -ENOMEM;
-		if (!pmd)
+		pmd_t *pmd = pmd_alloc(&init_mm, dir, address);
+		if (!pmd) {
+			err = -ENOMEM;
 			break;
+		}
 		if (remap_area_pmd(pmd, address, end - address,
-					 phys_addr + address, flags))
+					 phys_addr + address, flags)) {
+			err = -ENOMEM;
 			break;
-		error = 0;
+		}
+
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
+
 	spin_unlock(&init_mm.page_table_lock);
-	flush_tlb_all();
-	return error;
+	flush_cache_vmap(start, end);
+	return err;
 }
 
 /*

arch/arm/mm/mmap.c

+/*
+ *  linux/arch/arm/mm/mmap.c
+ */
+#include <linux/config.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/shm.h>
+
+#include <asm/system.h>
+
+#define COLOUR_ALIGN(addr,pgoff)		\
+	((((addr)+SHMLBA-1)&~(SHMLBA-1)) +	\
+	 (((pgoff)<<PAGE_SHIFT) & (SHMLBA-1)))
+
+/*
+ * We need to ensure that shared mappings are correctly aligned to
+ * avoid aliasing issues with VIPT caches.  We need to ensure that
+ * a specific page of an object is always mapped at a multiple of
+ * SHMLBA bytes.
+ *
+ * We unconditionally provide this function for all cases, however
+ * in the VIVT case, we optimise out the alignment rules.
+ */
+unsigned long
+arch_get_unmapped_area(struct file *filp, unsigned long addr,
+		unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	unsigned long start_addr;
+#ifdef CONFIG_CPU_V6
+	unsigned int cache_type;
+	int do_align = 0, aliasing = 0;
+
+	/*
+	 * We only need to do colour alignment if either the I or D
+	 * caches alias.  This is indicated by bits 9 and 21 of the
+	 * cache type register.
+	 */
+	cache_type = read_cpuid(CPUID_CACHETYPE);
+	if (cache_type != read_cpuid(CPUID_ID)) {
+		aliasing = (cache_type | cache_type >> 12) & (1 << 9);
+		if (aliasing)
+			do_align = filp || flags & MAP_SHARED;
+	}
+#else
+#define do_align 0
+#define aliasing 0
+#endif
+
+	/*
+	 * We should enforce the MAP_FIXED case.  However, currently
+	 * the generic kernel code doesn't allow us to handle this.
+	 */
+	if (flags & MAP_FIXED) {
+		if (aliasing && flags & MAP_SHARED && addr & (SHMLBA - 1))
+			return -EINVAL;
+		return addr;
+	}
+
+	if (len > TASK_SIZE)
+		return -ENOMEM;
+
+	if (addr) {
+		if (do_align)
+			addr = COLOUR_ALIGN(addr, pgoff);
+		else
+			addr = PAGE_ALIGN(addr);
+
+		vma = find_vma(mm, addr);
+		if (TASK_SIZE - len >= addr &&
+		    (!vma || addr + len <= vma->vm_start))
+			return addr;
+	}
+	start_addr = addr = mm->free_area_cache;
+
+full_search:
+	if (do_align)
+		addr = COLOUR_ALIGN(addr, pgoff);
+	else
+		addr = PAGE_ALIGN(addr);
+
+	for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
+		/* At this point:  (!vma || addr < vma->vm_end). */
+		if (TASK_SIZE - len < addr) {
+			/*
+			 * Start a new search - just in case we missed
+			 * some holes.
+			 */
+			if (start_addr != TASK_UNMAPPED_BASE) {
+				start_addr = addr = TASK_UNMAPPED_BASE;
+				goto full_search;
+			}
+			return -ENOMEM;
+		}
+		if (!vma || addr + len <= vma->vm_start) {
+			/*
+			 * Remember the place where we stopped the search:
+			 */
+			mm->free_area_cache = addr + len;
+			return addr;
+		}
+		addr = vma->vm_end;
+		if (do_align)
+			addr = COLOUR_ALIGN(addr, pgoff);
+	}
+}
+

arch/arm/oprofile/op_model_xscale.c

@@ -20,7 +20,8 @@
 #include <linux/sched.h>
 #include <linux/oprofile.h>
 #include <linux/interrupt.h>
-#include <asm/arch/irqs.h>
+#include <asm/irq.h>
+#include <asm/system.h>
 
 #include "op_counter.h"
 #include "op_arm_model.h"
@@ -399,8 +400,7 @@ static int xscale_detect_pmu(void)
 	int ret = 0;
 	u32 id;
 
-	__asm__ __volatile__ ("mrc p15, 0, %0, c0, c0, 0" : "=r" (id));
-	id = (id >> 13) & 0x7;
+	id = (read_cpuid(CPUID_ID) >> 13) & 0x7;
 
 	switch (id) {
 	case 1:

drivers/input/serio/Kconfig

@@ -80,7 +80,7 @@ config SERIO_PARKBD
 
 config SERIO_RPCKBD
 	tristate "Acorn RiscPC keyboard controller"
-	depends on ARCH_ACORN && SERIO
+	depends on (ARCH_ACORN || ARCH_CLPS7500) && SERIO
 	default y
 	help
 	  Say Y here if you have the Acorn RiscPC and want to use an AT
@@ -91,7 +91,7 @@ config SERIO_RPCKBD
 
 config SERIO_AMBAKMI
 	tristate "AMBA KMI keyboard controller"
-	depends on ARCH_INTEGRATOR && SERIO
+	depends on ARM_AMBA && SERIO
 
 config SERIO_SA1111
 	tristate "Intel SA1111 keyboard controller"

drivers/serial/uart00.c

@@ -7,6 +7,8 @@
  *                                          Deep Blue Solutions Ltd.
  *  Copyright 2001 Altera Corporation
  *
+ *  Update for 2.6.4 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -32,7 +34,6 @@
 #include <linux/serial.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
-#include <linux/pld/pld_hotswap.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -251,7 +252,7 @@ static void uart00_modem_status(struct uart_port *port)
 	wake_up_interruptible(&port->info->delta_msr_wait);
 }
 
-static void uart00_int(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t uart00_int(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct uart_port *port = dev_id;
 	unsigned int status, pass_counter = 0;
@@ -269,6 +270,8 @@ static void uart00_int(int irq, void *dev_id, struct pt_regs *regs)
 
 		status = UART_GET_INT_STATUS(port);
 	} while (status);
+
+	return IRQ_HANDLED;
 }
 
 static unsigned int uart00_tx_empty(struct uart_port *port)
@@ -613,7 +616,7 @@ uart00_console_get_options(struct uart_port *port, int *baud,
 static int __init uart00_console_setup(struct console *co, char *options)
 {
 	struct uart_port *port;
-	int baud = 38400;
+	int baud = 115200;
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';
@@ -639,7 +642,7 @@ static struct console uart00_console = {
 	.setup		= uart00_console_setup,
 	.flags		= CON_PRINTBUFFER,
 	.index		= 0,
-	.data		= &uart00_reg;
+	.data		= &uart00_reg,
 };
 
 static int __init uart00_console_init(void)
@@ -669,9 +672,10 @@ struct dev_port_entry{
 	struct uart_port *port;
 };
 
+#ifdef CONFIG_PLD_HOTSWAP
+
 static struct dev_port_entry dev_port_map[UART_NR];
 
-#ifdef CONFIG_PLD_HOTSWAP
 /*
  * Keep a mapping of dev_info addresses -> port lines to use when
  * removing ports dev==NULL indicates unused entry

drivers/video/acornfb.c

@@ -67,12 +67,37 @@
  */
 #define NR_MONTYPES	6
 static struct fb_monspecs monspecs[NR_MONTYPES] __initdata = {
-	{ 15469, 15781, 49,  51, 0 },	/* TV		*/
-	{     0, 99999,  0, 199, 0 },	/* Multi Freq	*/
-	{ 58608, 58608, 64,  64, 0 },	/* Hi-res mono	*/
-	{ 30000, 70000, 60,  60, 0 },	/* VGA		*/
-	{ 30000, 70000, 56,  75, 0 },	/* SVGA		*/
-	{ 30000, 70000, 60,  60, 0 }
+	{	/* TV		*/
+		.hfmin	= 15469,
+		.hfmax	= 15781,
+		.vfmin	= 49,
+		.vfmax	= 51,
+	}, {	/* Multi Freq	*/
+		.hfmin	= 0,
+		.hfmax	= 99999,
+		.vfmin	= 0,
+		.vfmax	= 199,
+	}, {	/* Hi-res mono	*/
+		.hfmin	= 58608,
+		.hfmax	= 58608,
+		.vfmin	= 64,
+		.vfmax	= 64,
+	}, {	/* VGA		*/
+		.hfmin	= 30000,
+		.hfmax	= 70000,
+		.vfmin	= 60,
+		.vfmax	= 60,
+	}, {	/* SVGA		*/
+		.hfmin	= 30000,
+		.hfmax	= 70000,
+		.vfmin	= 56,
+		.vfmax	= 75,
+	}, {
+		.hfmin	= 30000,
+		.hfmax	= 70000,
+		.vfmin	= 60,
+		.vfmax	= 60,
+	}
 };
 
 static struct fb_info fb_info;

drivers/video/sa1100fb.c

@@ -1615,7 +1615,10 @@ static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
 
 /* Fake monspecs to fill in fbinfo structure */
 static struct fb_monspecs monspecs __initdata = {
-	30000, 70000, 50, 65, 0	/* Generic */
+	.hfmin	= 30000,
+	.hfmax	= 70000,
+	.vfmin	= 50,
+	.vfmax	= 65,
 };
 
 

include/asm-arm/atomic.h

@@ -88,7 +88,7 @@ static inline int atomic_dec_and_test(atomic_t *v)
 "	strex	%1, %0, [%2]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=r" (tmp)
+	: "=&r" (result), "=&r" (tmp)
 	: "r" (&v->counter)
 	: "cc");
 
@@ -106,7 +106,7 @@ static inline int atomic_add_negative(int i, atomic_t *v)
 "	strex	%1, %0, [%2]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=r" (tmp)
+	: "=&r" (result), "=&r" (tmp)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 

include/asm-arm/pgtable.h

@@ -395,6 +395,11 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
 #include <asm-generic/pgtable.h>
 
+/*
+ * We provide our own arch_get_unmapped_area to cope with VIPT caches.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+
 /*
  * remap a physical address `phys' of size `size' with page protection `prot'
  * into virtual address `from'

include/asm-arm/shmparam.h

@@ -6,10 +6,11 @@
  * or page size, whichever is greater since the cache aliases
  * every size/ways bytes.
  */
-#if __LINUX_ARM_ARCH__ > 5
-#define	SHMLBA	(4 * PAGE_SIZE)
-#else
-#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
-#endif
+#define	SHMLBA	(4 * PAGE_SIZE)		 /* attach addr a multiple of this */
+
+/*
+ * Enforce SHMLBA in shmat
+ */
+#define __ARCH_FORCE_SHMLBA
 
 #endif /* _ASMARM_SHMPARAM_H */

include/asm-arm/system.h

@@ -42,6 +42,19 @@
 #define CR_XP	(1 << 23)	/* Extended page tables			*/
 #define CR_VE	(1 << 24)	/* Vectored interrupts			*/
 
+#define CPUID_ID	0
+#define CPUID_CACHETYPE	1
+#define CPUID_TCM	2
+#define CPUID_TLBTYPE	3
+
+#define read_cpuid(reg)							\
+	({								\
+		unsigned int __val;					\
+		asm("mrc%? p15, 0, %0, c0, c0, " __stringify(reg)	\
+		    : "=r" (__val));					\
+		__val;							\
+	})
+
 /*
  * This is used to ensure the compiler did actually allocate the register we
  * asked it for some inline assembly sequences.  Apparently we can't trust