drm/msm/dsi_pll_10nm: Convert pr_err prints to DRM_DEV_ERROR

DRM_DEV_ERROR should be used across this entire source: convert the
pr_err prints to the first as a cleanup.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c

@@ -344,6 +344,7 @@ static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
 
 static int dsi_pll_10nm_lock_status(struct dsi_pll_10nm *pll)
 {
+	struct device *dev = &pll->pdev->dev;
 	int rc;
 	u32 status = 0;
 	u32 const delay_us = 100;
@@ -356,8 +357,8 @@ static int dsi_pll_10nm_lock_status(struct dsi_pll_10nm *pll)
 				       delay_us,
 				       timeout_us);
 	if (rc)
-		pr_err("DSI PLL(%d) lock failed, status=0x%08x\n",
-		       pll->id, status);
+		DRM_DEV_ERROR(dev, "DSI PLL(%d) lock failed, status=0x%08x\n",
+			      pll->id, status);
 
 	return rc;
 }
@@ -404,6 +405,7 @@ static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw)
 {
 	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
 	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+	struct device *dev = &pll_10nm->pdev->dev;
 	int rc;
 
 	dsi_pll_enable_pll_bias(pll_10nm);
@@ -412,7 +414,7 @@ static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw)
 
 	rc = dsi_pll_10nm_vco_set_rate(hw,pll_10nm->vco_current_rate, 0);
 	if (rc) {
-		pr_err("vco_set_rate failed, rc=%d\n", rc);
+		DRM_DEV_ERROR(dev, "vco_set_rate failed, rc=%d\n", rc);
 		return rc;
 	}
 
@@ -429,7 +431,7 @@ static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw)
 	/* Check for PLL lock */
 	rc = dsi_pll_10nm_lock_status(pll_10nm);
 	if (rc) {
-		pr_err("PLL(%d) lock failed\n", pll_10nm->id);
+		DRM_DEV_ERROR(dev, "PLL(%d) lock failed\n", pll_10nm->id);
 		goto error;
 	}