drm/bridge: chrontel-ch7033: Add byteswap order setting

Add the option to set the byteswap order in the devicetree. For the
official HDMI DIP for the NTC CHIP the byteswap order needs to be
RGB, however the driver sets it as BGR. With this patch the driver
will remain at BGR unless manually specified via devicetree.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902153906.31000-3-macroalpha82@gmail.com

drivers/gpu/drm/bridge/chrontel-ch7033.c

@@ -68,6 +68,7 @@ enum {
 	BYTE_SWAP_GBR	= 3,
 	BYTE_SWAP_BRG	= 4,
 	BYTE_SWAP_BGR	= 5,
+	BYTE_SWAP_MAX	= 6,
 };
 
 /* Page 0, Register 0x19 */
@@ -355,6 +356,8 @@ static void ch7033_bridge_mode_set(struct drm_bridge *bridge,
 	int hsynclen = mode->hsync_end - mode->hsync_start;
 	int vbporch = mode->vsync_start - mode->vdisplay;
 	int vsynclen = mode->vsync_end - mode->vsync_start;
+	u8 byte_swap;
+	int ret;
 
 	/*
 	 * Page 4
@@ -398,7 +401,15 @@ static void ch7033_bridge_mode_set(struct drm_bridge *bridge,
 	regmap_write(priv->regmap, 0x15, vbporch);
 	regmap_write(priv->regmap, 0x16, vsynclen);
 
-	/* Input color swap. */
+	/* Input color swap. Byte order is optional and will default to
+	 * BYTE_SWAP_BGR to preserve backwards compatibility with existing
+	 * driver.
+	 */
+	ret = of_property_read_u8(priv->bridge.of_node, "chrontel,byteswap",
+				  &byte_swap);
+	if (!ret && byte_swap < BYTE_SWAP_MAX)
+		regmap_update_bits(priv->regmap, 0x18, SWAP, byte_swap);
+	else
 		regmap_update_bits(priv->regmap, 0x18, SWAP, BYTE_SWAP_BGR);
 
 	/* Input clock and sync polarity. */