Commit ce9940a9 authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Kukjin Kim

ARM: dts: Enable S3C RTC on exynos4412-trats2 and exynos5420-arndale-octa

Extend the S3C RTC node with rtc_src clock so it could be operational.
The rtc_src clock is provided by MAX77686 (Trats2) or S2MPS11 (Arndale
Octa).
Signed-off-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: default avatarJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: default avatarKukjin Kim <kgene@kernel.org>
parent c5abf619
...@@ -266,7 +266,7 @@ watchdog@10060000 { ...@@ -266,7 +266,7 @@ watchdog@10060000 {
status = "disabled"; status = "disabled";
}; };
rtc@10070000 { rtc: rtc@10070000 {
compatible = "samsung,s3c6410-rtc"; compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>; reg = <0x10070000 0x100>;
interrupt-parent = <&pmu_system_controller>; interrupt-parent = <&pmu_system_controller>;
......
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
#include "exynos4412.dtsi" #include "exynos4412.dtsi"
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77686.h>
/ { / {
model = "Samsung Trats 2 based on Exynos4412"; model = "Samsung Trats 2 based on Exynos4412";
...@@ -214,7 +215,7 @@ i2c@138D0000 { ...@@ -214,7 +215,7 @@ i2c@138D0000 {
pinctrl-names = "default"; pinctrl-names = "default";
status = "okay"; status = "okay";
max77686_pmic@09 { max77686: max77686_pmic@09 {
compatible = "maxim,max77686"; compatible = "maxim,max77686";
interrupt-parent = <&gpx0>; interrupt-parent = <&gpx0>;
interrupts = <7 0>; interrupts = <7 0>;
...@@ -1304,3 +1305,9 @@ sleep3: sleep-states { ...@@ -1304,3 +1305,9 @@ sleep3: sleep-states {
PIN_SLP(gpv4-0, INPUT, DOWN); PIN_SLP(gpv4-0, INPUT, DOWN);
}; };
}; };
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
clock-names = "rtc", "rtc_src";
};
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
#include "exynos5420.dtsi" #include "exynos5420.dtsi"
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h> #include <dt-bindings/input/input.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
/ { / {
model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
...@@ -38,10 +39,6 @@ oscclk { ...@@ -38,10 +39,6 @@ oscclk {
}; };
}; };
rtc@101E0000 {
status = "okay";
};
codec@11000000 { codec@11000000 {
samsung,mfc-r = <0x43000000 0x800000>; samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>; samsung,mfc-l = <0x51000000 0x800000>;
...@@ -387,3 +384,9 @@ s2mps11_irq: s2mps11-irq { ...@@ -387,3 +384,9 @@ s2mps11_irq: s2mps11-irq {
samsung,pin-drv = <0>; samsung,pin-drv = <0>;
}; };
}; };
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment