arm64: dts: qcom: pm8941-rtc add alarm register

A few descriptions including a qcom,pm8941-rtc describe two reg-names
for the "rtc" and "alarm" register banks, but only one offset.
For consistency with reg-names, add the "alarm" register offset.
No functional change is expected from this.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221219191000.2570545-5-echanude@redhat.com

arch/arm64/boot/dts/qcom/pm8150.dtsi

@@ -121,7 +121,7 @@ pm8150_adc_tm: adc-tm@3500 {
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
+			reg = <0x6000>, <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 		};

arch/arm64/boot/dts/qcom/pm8916.dtsi

@@ -93,7 +93,8 @@ adc-chan@f {
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 

arch/arm64/boot/dts/qcom/pm8950.dtsi

@@ -126,7 +126,7 @@ xo-therm-buf@3c {
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
+			reg = <0x6000>, <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 		};

arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi

@@ -108,7 +108,7 @@ pmm8155au_1_adc_tm: adc-tm@3500 {
 
 		pmm8155au_1_rtc: rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
+			reg = <0x6000>, <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 

arch/arm64/boot/dts/qcom/pmp8074.dtsi

@@ -74,7 +74,7 @@ vph-pwr@131 {
 
 		pmp8074_rtc: rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
+			reg = <0x6000>, <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 			allow-set-time;

arch/arm64/boot/dts/qcom/pms405.dtsi

@@ -125,7 +125,7 @@ xo_therm: xo_temp@76 {
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
+			reg = <0x6000>, <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 		};