Commit cf24b1c8 authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

ARM: dts: imx6qdl-gw5xxx: Remove the 'uart-has-rtscts' property

The 'uart-has-rtscts' property should be used when the board exposes the
native RTS and CTS UART pins.

On the imx6qdl-gw5xxx boards such pins are not used, so remove the
'uart-has-rtscts' property to make the hardware description correct.

Documentation/devicetree/bindings/serial/serial.txt states that
'uart-has-rtscts' and 'rts-gpios' properties are mutually exclusive.
Signed-off-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 392405d3
...@@ -377,7 +377,6 @@ &ssi1 { ...@@ -377,7 +377,6 @@ &ssi1 {
&uart1 { &uart1 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>; pinctrl-0 = <&pinctrl_uart1>;
uart-has-rtscts;
rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
......
...@@ -368,7 +368,6 @@ &ssi1 { ...@@ -368,7 +368,6 @@ &ssi1 {
&uart1 { &uart1 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>; pinctrl-0 = <&pinctrl_uart1>;
uart-has-rtscts;
rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
......
...@@ -416,7 +416,6 @@ &ssi2 { ...@@ -416,7 +416,6 @@ &ssi2 {
&uart1 { &uart1 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>; pinctrl-0 = <&pinctrl_uart1>;
uart-has-rtscts;
rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment