Merge branches 'samsung/cleanup', 'samsung/exynos-clk' and 'samsung/exynos-clk2' into next/cleanup3

These are dependencies for the following Samsung branches
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/samsung/pmu.txt

+SAMSUNG Exynos SoC series PMU Registers
+
+Properties:
+ - compatible : should contain two values. First value must be one from following list:
+		   - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
+		   - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
+		second value must be always "syscon".
+
+ - reg : offset and length of the register set.
+
+Example :
+pmu_system_controller: system-controller@10040000 {
+	compatible = "samsung,exynos5250-pmu", "syscon";
+	reg = <0x10040000 0x5000>;
+};

Documentation/devicetree/bindings/clock/exynos4-clock.txt

@@ -15,259 +15,12 @@ Required Properties:
 
 - #clock-cells: should be 1.
 
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume. Some of the clocks are available only on a particular
-Exynos4 SoC and this is specified where applicable.
-
-
-		 [Core Clocks]
-
-  Clock               ID      SoC (if specific)
-  -----------------------------------------------
-
-  xxti                1
-  xusbxti             2
-  fin_pll             3
-  fout_apll           4
-  fout_mpll           5
-  fout_epll           6
-  fout_vpll           7
-  sclk_apll           8
-  sclk_mpll           9
-  sclk_epll           10
-  sclk_vpll           11
-  arm_clk             12
-  aclk200             13
-  aclk100             14
-  aclk160             15
-  aclk133             16
-  mout_mpll_user_t    17      Exynos4x12
-  mout_mpll_user_c    18      Exynos4x12
-  mout_core           19
-  mout_apll           20
-
-
-            [Clock Gate for Special Clocks]
-
-  Clock               ID      SoC (if specific)
-  -----------------------------------------------
-
-  sclk_fimc0          128
-  sclk_fimc1          129
-  sclk_fimc2          130
-  sclk_fimc3          131
-  sclk_cam0           132
-  sclk_cam1           133
-  sclk_csis0          134
-  sclk_csis1          135
-  sclk_hdmi           136
-  sclk_mixer          137
-  sclk_dac            138
-  sclk_pixel          139
-  sclk_fimd0          140
-  sclk_mdnie0         141     Exynos4412
-  sclk_mdnie_pwm0 12  142     Exynos4412
-  sclk_mipi0          143
-  sclk_audio0         144
-  sclk_mmc0           145
-  sclk_mmc1           146
-  sclk_mmc2           147
-  sclk_mmc3           148
-  sclk_mmc4           149
-  sclk_sata           150     Exynos4210
-  sclk_uart0          151
-  sclk_uart1          152
-  sclk_uart2          153
-  sclk_uart3          154
-  sclk_uart4          155
-  sclk_audio1         156
-  sclk_audio2         157
-  sclk_spdif          158
-  sclk_spi0           159
-  sclk_spi1           160
-  sclk_spi2           161
-  sclk_slimbus        162
-  sclk_fimd1          163     Exynos4210
-  sclk_mipi1          164     Exynos4210
-  sclk_pcm1           165
-  sclk_pcm2           166
-  sclk_i2s1           167
-  sclk_i2s2           168
-  sclk_mipihsi        169     Exynos4412
-  sclk_mfc            170
-  sclk_pcm0           171
-  sclk_g3d            172
-  sclk_pwm_isp        173     Exynos4x12
-  sclk_spi0_isp       174     Exynos4x12
-  sclk_spi1_isp       175     Exynos4x12
-  sclk_uart_isp       176     Exynos4x12
-  sclk_fimg2d         177
-
-	      [Peripheral Clock Gates]
-
-  Clock               ID      SoC (if specific)
-  -----------------------------------------------
-
-  fimc0               256
-  fimc1               257
-  fimc2               258
-  fimc3               259
-  csis0               260
-  csis1               261
-  jpeg                262
-  smmu_fimc0          263
-  smmu_fimc1          264
-  smmu_fimc2          265
-  smmu_fimc3          266
-  smmu_jpeg           267
-  vp                  268
-  mixer               269
-  tvenc               270     Exynos4210
-  hdmi                271
-  smmu_tv             272
-  mfc                 273
-  smmu_mfcl           274
-  smmu_mfcr           275
-  g3d                 276
-  g2d                 277
-  rotator             278     Exynos4210
-  mdma                279     Exynos4210
-  smmu_g2d            280     Exynos4210
-  smmu_rotator        281     Exynos4210
-  smmu_mdma           282     Exynos4210
-  fimd0               283
-  mie0                284
-  mdnie0              285     Exynos4412
-  dsim0               286
-  smmu_fimd0          287
-  fimd1               288     Exynos4210
-  mie1                289     Exynos4210
-  dsim1               290     Exynos4210
-  smmu_fimd1          291     Exynos4210
-  pdma0               292
-  pdma1               293
-  pcie_phy            294
-  sata_phy            295     Exynos4210
-  tsi                 296
-  sdmmc0              297
-  sdmmc1              298
-  sdmmc2              299
-  sdmmc3              300
-  sdmmc4              301
-  sata                302     Exynos4210
-  sromc               303
-  usb_host            304
-  usb_device          305
-  pcie                306
-  onenand             307
-  nfcon               308
-  smmu_pcie           309
-  gps                 310
-  smmu_gps            311
-  uart0               312
-  uart1               313
-  uart2               314
-  uart3               315
-  uart4               316
-  i2c0                317
-  i2c1                318
-  i2c2                319
-  i2c3                320
-  i2c4                321
-  i2c5                322
-  i2c6                323
-  i2c7                324
-  i2c_hdmi            325
-  tsadc               326
-  spi0                327
-  spi1                328
-  spi2                329
-  i2s1                330
-  i2s2                331
-  pcm0                332
-  i2s0                333
-  pcm1                334
-  pcm2                335
-  pwm                 336
-  slimbus             337
-  spdif               338
-  ac97                339
-  modemif             340
-  chipid              341
-  sysreg              342
-  hdmi_cec            343
-  mct                 344
-  wdt                 345
-  rtc                 346
-  keyif               347
-  audss               348
-  mipi_hsi            349     Exynos4210
-  mdma2               350     Exynos4210
-  pixelasyncm0        351
-  pixelasyncm1        352
-  fimc_lite0          353     Exynos4x12
-  fimc_lite1          354     Exynos4x12
-  ppmuispx            355     Exynos4x12
-  ppmuispmx           356     Exynos4x12
-  fimc_isp            357     Exynos4x12
-  fimc_drc            358     Exynos4x12
-  fimc_fd             359     Exynos4x12
-  mcuisp              360     Exynos4x12
-  gicisp              361     Exynos4x12
-  smmu_isp            362     Exynos4x12
-  smmu_drc            363     Exynos4x12
-  smmu_fd             364     Exynos4x12
-  smmu_lite0          365     Exynos4x12
-  smmu_lite1          366     Exynos4x12
-  mcuctl_isp          367     Exynos4x12
-  mpwm_isp            368     Exynos4x12
-  i2c0_isp            369     Exynos4x12
-  i2c1_isp            370     Exynos4x12
-  mtcadc_isp          371     Exynos4x12
-  pwm_isp             372     Exynos4x12
-  wdt_isp             373     Exynos4x12
-  uart_isp            374     Exynos4x12
-  asyncaxim           375     Exynos4x12
-  smmu_ispcx          376     Exynos4x12
-  spi0_isp            377     Exynos4x12
-  spi1_isp            378     Exynos4x12
-  pwm_isp_sclk        379     Exynos4x12
-  spi0_isp_sclk       380     Exynos4x12
-  spi1_isp_sclk       381     Exynos4x12
-  uart_isp_sclk       382     Exynos4x12
-  tmu_apbif           383
-
-		[Mux Clocks]
-
-  Clock			ID	SoC (if specific)
-  -----------------------------------------------
-
-  mout_fimc0		384
-  mout_fimc1		385
-  mout_fimc2		386
-  mout_fimc3		387
-  mout_cam0		388
-  mout_cam1		389
-  mout_csis0		390
-  mout_csis1		391
-  mout_g3d0		392
-  mout_g3d1		393
-  mout_g3d		394
-  aclk400_mcuisp	395	Exynos4x12
-
-		[Div Clocks]
-
-  Clock			ID	SoC (if specific)
-  -----------------------------------------------
-
-  div_isp0		450	Exynos4x12
-  div_isp1		451	Exynos4x12
-  div_mcuisp0		452	Exynos4x12
-  div_mcuisp1		453	Exynos4x12
-  div_aclk200		454	Exynos4x12
-  div_aclk400_mcuisp	455	Exynos4x12
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
 
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos4.h header and can be used in device
+tree sources.
 
 Example 1: An example of a clock controller node is listed below.
 
@@ -285,6 +38,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
-		clocks = <&clock 314>, <&clock 153>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -13,163 +13,12 @@ Required Properties:
 
 - #clock-cells: should be 1.
 
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
-
-
-       [Core Clocks]
-
-  Clock			ID
-  ----------------------------
-
-  fin_pll		1
-
-  [Clock Gate for Special Clocks]
-
-  Clock			ID
-  ----------------------------
-
-  sclk_cam_bayer	128
-  sclk_cam0		129
-  sclk_cam1		130
-  sclk_gscl_wa		131
-  sclk_gscl_wb		132
-  sclk_fimd1		133
-  sclk_mipi1		134
-  sclk_dp		135
-  sclk_hdmi		136
-  sclk_pixel		137
-  sclk_audio0		138
-  sclk_mmc0		139
-  sclk_mmc1		140
-  sclk_mmc2		141
-  sclk_mmc3		142
-  sclk_sata		143
-  sclk_usb3		144
-  sclk_jpeg		145
-  sclk_uart0		146
-  sclk_uart1		147
-  sclk_uart2		148
-  sclk_uart3		149
-  sclk_pwm		150
-  sclk_audio1		151
-  sclk_audio2		152
-  sclk_spdif		153
-  sclk_spi0		154
-  sclk_spi1		155
-  sclk_spi2		156
-  div_i2s1		157
-  div_i2s2		158
-  sclk_hdmiphy		159
-  div_pcm0		160
-
-
-   [Peripheral Clock Gates]
-
-  Clock			ID
-  ----------------------------
-
-  gscl0			256
-  gscl1			257
-  gscl2			258
-  gscl3			259
-  gscl_wa		260
-  gscl_wb		261
-  smmu_gscl0		262
-  smmu_gscl1		263
-  smmu_gscl2		264
-  smmu_gscl3		265
-  mfc			266
-  smmu_mfcl		267
-  smmu_mfcr		268
-  rotator		269
-  jpeg			270
-  mdma1			271
-  smmu_rotator		272
-  smmu_jpeg		273
-  smmu_mdma1		274
-  pdma0			275
-  pdma1			276
-  sata			277
-  usbotg		278
-  mipi_hsi		279
-  sdmmc0		280
-  sdmmc1		281
-  sdmmc2		282
-  sdmmc3		283
-  sromc			284
-  usb2			285
-  usb3			286
-  sata_phyctrl		287
-  sata_phyi2c		288
-  uart0			289
-  uart1			290
-  uart2			291
-  uart3			292
-  uart4			293
-  i2c0			294
-  i2c1			295
-  i2c2			296
-  i2c3			297
-  i2c4			298
-  i2c5			299
-  i2c6			300
-  i2c7			301
-  i2c_hdmi		302
-  adc			303
-  spi0			304
-  spi1			305
-  spi2			306
-  i2s1			307
-  i2s2			308
-  pcm1			309
-  pcm2			310
-  pwm			311
-  spdif			312
-  ac97			313
-  hsi2c0		314
-  hsi2c1		315
-  hs12c2		316
-  hs12c3		317
-  chipid		318
-  sysreg		319
-  pmu			320
-  cmu_top		321
-  cmu_core		322
-  cmu_mem		323
-  tzpc0			324
-  tzpc1			325
-  tzpc2			326
-  tzpc3			327
-  tzpc4			328
-  tzpc5			329
-  tzpc6			330
-  tzpc7			331
-  tzpc8			332
-  tzpc9			333
-  hdmi_cec		334
-  mct			335
-  wdt			336
-  rtc			337
-  tmu			338
-  fimd1			339
-  mie1			340
-  dsim0			341
-  dp			342
-  mixer			343
-  hdmi			344
-  g2d			345
-  mdma0			346
-  smmu_mdma0		347
-
-
-   [Clock Muxes]
-
-  Clock			ID
-  ----------------------------
-  mout_hdmi		1024
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
 
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5250.h header and can be used in device
+tree sources.
 
 Example 1: An example of a clock controller node is listed below.
 
@@ -187,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
-		clocks = <&clock 314>, <&clock 153>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};

Documentation/devicetree/bindings/clock/exynos5420-clock.txt

@@ -13,184 +13,12 @@ Required Properties:
 
 - #clock-cells: should be 1.
 
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
 
-
-       [Core Clocks]
-
-  Clock			ID
-  ----------------------------
-
-  fin_pll		1
-
-  [Clock Gate for Special Clocks]
-
-  Clock			ID
-  ----------------------------
-  sclk_uart0		128
-  sclk_uart1		129
-  sclk_uart2		130
-  sclk_uart3		131
-  sclk_mmc0		132
-  sclk_mmc1		133
-  sclk_mmc2		134
-  sclk_spi0		135
-  sclk_spi1		136
-  sclk_spi2		137
-  sclk_i2s1		138
-  sclk_i2s2		139
-  sclk_pcm1		140
-  sclk_pcm2		141
-  sclk_spdif		142
-  sclk_hdmi		143
-  sclk_pixel		144
-  sclk_dp1		145
-  sclk_mipi1		146
-  sclk_fimd1		147
-  sclk_maudio0		148
-  sclk_maupcm0		149
-  sclk_usbd300		150
-  sclk_usbd301		151
-  sclk_usbphy300	152
-  sclk_usbphy301	153
-  sclk_unipro		154
-  sclk_pwm		155
-  sclk_gscl_wa		156
-  sclk_gscl_wb		157
-  sclk_hdmiphy		158
-
-   [Peripheral Clock Gates]
-
-  Clock			ID
-  ----------------------------
-
-  aclk66_peric		256
-  uart0			257
-  uart1			258
-  uart2			259
-  uart3			260
-  i2c0			261
-  i2c1			262
-  i2c2			263
-  i2c3			264
-  i2c4			265
-  i2c5			266
-  i2c6			267
-  i2c7			268
-  i2c_hdmi		269
-  tsadc			270
-  spi0			271
-  spi1			272
-  spi2			273
-  keyif			274
-  i2s1			275
-  i2s2			276
-  pcm1			277
-  pcm2			278
-  pwm			279
-  spdif			280
-  i2c8			281
-  i2c9			282
-  i2c10			283
-  aclk66_psgen		300
-  chipid		301
-  sysreg		302
-  tzpc0			303
-  tzpc1			304
-  tzpc2			305
-  tzpc3			306
-  tzpc4			307
-  tzpc5			308
-  tzpc6			309
-  tzpc7			310
-  tzpc8			311
-  tzpc9			312
-  hdmi_cec		313
-  seckey		314
-  mct			315
-  wdt			316
-  rtc			317
-  tmu			318
-  tmu_gpu		319
-  pclk66_gpio		330
-  aclk200_fsys2		350
-  mmc0			351
-  mmc1			352
-  mmc2			353
-  sromc			354
-  ufs			355
-  aclk200_fsys		360
-  tsi			361
-  pdma0			362
-  pdma1			363
-  rtic			364
-  usbh20		365
-  usbd300		366
-  usbd301		377
-  aclk400_mscl		380
-  mscl0			381
-  mscl1			382
-  mscl2			383
-  smmu_mscl0		384
-  smmu_mscl1		385
-  smmu_mscl2		386
-  aclk333		400
-  mfc			401
-  smmu_mfcl		402
-  smmu_mfcr		403
-  aclk200_disp1		410
-  dsim1			411
-  dp1			412
-  hdmi			413
-  aclk300_disp1		420
-  fimd1			421
-  smmu_fimd1		422
-  aclk166		430
-  mixer			431
-  aclk266		440
-  rotator		441
-  mdma1			442
-  smmu_rotator		443
-  smmu_mdma1		444
-  aclk300_jpeg		450
-  jpeg			451
-  jpeg2			452
-  smmu_jpeg		453
-  aclk300_gscl		460
-  smmu_gscl0		461
-  smmu_gscl1		462
-  gscl_wa		463
-  gscl_wb		464
-  gscl0			465
-  gscl1			466
-  clk_3aa		467
-  aclk266_g2d		470
-  sss			471
-  slim_sss		472
-  mdma0			473
-  aclk333_g2d		480
-  g2d			481
-  aclk333_432_gscl	490
-  smmu_3aa		491
-  smmu_fimcl0		492
-  smmu_fimcl1		493
-  smmu_fimcl3		494
-  fimc_lite3		495
-  aclk_g3d		500
-  g3d			501
-  smmu_mixer		502
-
-  Mux			ID
-  ----------------------------
-
-  mout_hdmi		640
-
-  Divider		ID
-  ----------------------------
-
-  dout_pixel		768
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5420.h header and can be used in device
+tree sources.
 
 Example 1: An example of a clock controller node is listed below.
 
@@ -208,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
-		clocks = <&clock 259>, <&clock 130>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};

Documentation/devicetree/bindings/clock/exynos5440-clock.txt

@@ -12,45 +12,12 @@ Required Properties:
 
 - #clock-cells: should be 1.
 
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
-
-
-       [Core Clocks]
-
-  Clock			ID
-  ----------------------------
-
-  xtal			1
-  arm_clk		2
-
-   [Peripheral Clock Gates]
-
-  Clock			ID
-  ----------------------------
-
-  spi_baud		16
-  pb0_250		17
-  pr0_250		18
-  pr1_250		19
-  b_250			20
-  b_125			21
-  b_200			22
-  sata			23
-  usb			24
-  gmac0			25
-  cs250			26
-  pb0_250_o		27
-  pr0_250_o		28
-  pr1_250_o		29
-  b_250_o		30
-  b_125_o		31
-  b_200_o		32
-  sata_o		33
-  usb_o			34
-  gmac0_o		35
-  cs250_o		36
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5440.h header and can be used in device
+tree sources.
 
 Example: An example of a clock controller node is listed below.
 

arch/arm/Kconfig.debug

@@ -1145,7 +1145,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
 
 config DEBUG_UNCOMPRESS
 	bool
-	depends on ARCH_MULTIPLATFORM || ARCH_MSM
+	depends on ARCH_MULTIPLATFORM || ARCH_MSM || ARCH_EXYNOS
 	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
 	help
@@ -1161,7 +1161,8 @@ config DEBUG_UNCOMPRESS
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM
+	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
+					ARCH_EXYNOS
 	default "mach/uncompress.h"
 
 config EARLY_PRINTK

arch/arm/boot/dts/exynos4210.dtsi

@@ -53,7 +53,7 @@ mct@10050000 {
 		reg = <0x10050000 0x800>;
 		interrupt-parent = <&mct_map>;
 		interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
-		clocks = <&clock 3>, <&clock 344>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
@@ -109,7 +109,7 @@ tmu@100C0000 {
 		interrupt-parent = <&combiner>;
 		reg = <0x100C0000 0x100>;
 		interrupts = <2 4>;
-		clocks = <&clock 383>;
+		clocks = <&clock CLK_TMU_APBIF>;
 		clock-names = "tmu_apbif";
 		status = "disabled";
 	};
@@ -118,13 +118,14 @@ g2d@12800000 {
 		compatible = "samsung,s5pv210-g2d";
 		reg = <0x12800000 0x1000>;
 		interrupts = <0 89 0>;
-		clocks = <&clock 177>, <&clock 277>;
+		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};
 
 	camera {
-		clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
 		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
 
 		fimc_0: fimc@11800000 {

arch/arm/boot/dts/exynos4412-odroidx.dts

@@ -251,7 +251,7 @@ buck1_reg: BUCK1 {
 				buck2_reg: BUCK2 {
 					regulator-name = "vdd_arm";
 					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1300000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

arch/arm/boot/dts/exynos4412-origen.dts

@@ -459,8 +459,8 @@ buck1_reg: BUCK1 {
 
 				buck2_reg: BUCK2 {
 					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <925000>;
-					regulator-max-microvolt	= <1300000>;
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt	= <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 					op_mode = <1>; /* Normal Mode */

arch/arm/boot/dts/exynos4x12.dtsi

@@ -47,7 +47,7 @@ mct@10050000 {
 		reg = <0x10050000 0x800>;
 		interrupt-parent = <&mct_map>;
 		interrupts = <0>, <1>, <2>, <3>, <4>;
-		clocks = <&clock 3>, <&clock 344>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
@@ -97,13 +97,14 @@ g2d@10800000 {
 		compatible = "samsung,exynos4212-g2d";
 		reg = <0x10800000 0x1000>;
 		interrupts = <0 89 0>;
-		clocks = <&clock 177>, <&clock 277>;
+		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};
 
 	camera {
-		clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
 		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
 
 		fimc_0: fimc@11800000 {
@@ -145,7 +146,7 @@ fimc_lite_0: fimc-lite@12390000 {
 			reg = <0x12390000 0x1000>;
 			interrupts = <0 105 0>;
 			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock 353>;
+			clocks = <&clock CLK_FIMC_LITE0>;
 			clock-names = "flite";
 			status = "disabled";
 		};
@@ -155,7 +156,7 @@ fimc_lite_1: fimc-lite@123A0000 {
 			reg = <0x123A0000 0x1000>;
 			interrupts = <0 106 0>;
 			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock 354>;
+			clocks = <&clock CLK_FIMC_LITE1>;
 			clock-names = "flite";
 			status = "disabled";
 		};
@@ -165,12 +166,19 @@ fimc_is: fimc-is@12000000 {
 			reg = <0x12000000 0x260000>;
 			interrupts = <0 90 0>, <0 95 0>;
 			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock 353>, <&clock 354>, <&clock 355>,
-				<&clock 356>, <&clock 17>, <&clock 357>,
-				<&clock 358>, <&clock 359>, <&clock 360>,
-				<&clock 450>,<&clock 451>, <&clock 452>,
-				<&clock 453>, <&clock 176>, <&clock 13>,
-				<&clock 454>, <&clock 395>, <&clock 455>;
+			clocks = <&clock CLK_FIMC_LITE0>,
+				 <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
+				 <&clock CLK_PPMUISPMX>,
+				 <&clock CLK_MOUT_MPLL_USER_T>,
+				 <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
+				 <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
+				 <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
+				 <&clock CLK_DIV_MCUISP0>,
+				 <&clock CLK_DIV_MCUISP1>,
+				 <&clock CLK_SCLK_UART_ISP>,
+				 <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
+				 <&clock CLK_ACLK400_MCUISP>,
+				 <&clock CLK_DIV_ACLK400_MCUISP>;
 			clock-names = "lite0", "lite1", "ppmuispx",
 				      "ppmuispmx", "mpll", "isp",
 				      "drc", "fd", "mcuisp",
@@ -190,7 +198,7 @@ pmu {
 			i2c1_isp: i2c-isp@12140000 {
 				compatible = "samsung,exynos4212-i2c-isp";
 				reg = <0x12140000 0x100>;
-				clocks = <&clock 370>;
+				clocks = <&clock CLK_I2C1_ISP>;
 				clock-names = "i2c_isp";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -205,7 +213,7 @@ mshc_0: mmc@12550000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		fifo-depth = <0x80>;
-		clocks = <&clock 301>, <&clock 149>;
+		clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
 		clock-names = "biu", "ciu";
 		status = "disabled";
 	};

arch/arm/boot/dts/exynos5.dtsi

@@ -81,13 +81,6 @@ rtc@101E0000 {
 		status = "disabled";
 	};
 
-	watchdog {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		status = "disabled";
-	};
-
 	fimd@14400000 {
 		compatible = "samsung,exynos5250-fimd";
 		interrupt-parent = <&combiner>;

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -25,6 +25,10 @@ chosen {
 		bootargs = "console=ttySAC2,115200";
 	};
 
+	rtc@101E0000 {
+		status = "okay";
+	};
+
 	codec@11000000 {
 		samsung,mfc-r = <0x43000000 0x800000>;
 		samsung,mfc-l = <0x51000000 0x800000>;

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -27,6 +27,10 @@ chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
+	rtc@101E0000 {
+		status = "okay";
+	};
+
 	i2c@12C60000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <20000>;
@@ -36,6 +40,148 @@ eeprom@50 {
 			compatible = "samsung,s524ad0xd1";
 			reg = <0x50>;
 		};
+
+		max77686@09 {
+			compatible = "maxim,max77686";
+			reg = <0x09>;
+
+			voltage-regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "P1.0V_LDO_OUT1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "P1.2V_LDO_OUT2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "P1.8V_LDO_OUT3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "P2.8V_LDO_OUT4";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "P1.8V_LDO_OUT5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "P1.1V_LDO_OUT6";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "P1.1V_LDO_OUT7";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "P1.0V_LDO_OUT8";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "P1.8V_LDO_OUT10";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "P1.8V_LDO_OUT11";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "P3.0V_LDO_OUT12";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "P1.8V_LDO_OUT13";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "P1.8V_LDO_OUT14";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "P1.0V_LDO_OUT15";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "P1.8V_LDO_OUT16";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "P1.8V_BUCK_OUT5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
 	};
 
 	vdd: fixed-regulator@0 {

arch/arm/boot/dts/exynos5250-snow.dts

@@ -20,6 +20,10 @@ aliases {
 		i2c104 = &i2c_104;
 	};
 
+	rtc@101E0000 {
+		status = "okay";
+	};
+
 	pinctrl@11400000 {
 		sd3_clk: sd3-clk {
 			samsung,pin-drv = <0>;

arch/arm/boot/dts/exynos5420-arndale-octa.dts

@@ -11,6 +11,8 @@
 
 /dts-v1/;
 #include "exynos5420.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
@@ -31,6 +33,10 @@ oscclk {
 		};
 	};
 
+	rtc@101E0000 {
+		status = "okay";
+	};
+
 	mmc@12200000 {
 		status = "okay";
 		broken-cd;
@@ -41,6 +47,7 @@ mmc@12200000 {
 		samsung,dw-mshc-ddr-timing = <0 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+		vmmc-supply = <&ldo10_reg>;
 
 		slot@0 {
 			reg = <0>;
@@ -57,10 +64,301 @@ mmc@12220000 {
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		vmmc-supply = <&ldo10_reg>;
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <4>;
 		};
 	};
+
+	hsi2c_4: i2c@12CA0000 {
+		status = "okay";
+
+		s2mps11_pmic@66 {
+			compatible = "samsung,s2mps11-pmic";
+			reg = <0x66>;
+			s2mps11,buck2-ramp-delay = <12>;
+			s2mps11,buck34-ramp-delay = <12>;
+			s2mps11,buck16-ramp-delay = <12>;
+			s2mps11,buck6-ramp-enable = <1>;
+			s2mps11,buck2-ramp-enable = <1>;
+			s2mps11,buck3-ramp-enable = <1>;
+			s2mps11,buck4-ramp-enable = <1>;
+
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+			s2mps11_osc: clocks {
+				#clock-cells = <1>;
+				clock-output-names = "s2mps11_ap",
+						"s2mps11_cp", "s2mps11_bt";
+			};
+
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "PVDD_ALIVE_1V0";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "PVDD_APIO_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "PVDD_APIO_MMCON_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "PVDD_ADC_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "PVDD_PLL_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "PVDD_ANAIP_1V0";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "PVDD_ANAIP_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "PVDD_ABB_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "PVDD_USB_3V3";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "PVDD_PRE_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "PVDD_USB_1V0";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "PVDD_HSIC_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "PVDD_APIO_MMCOFF_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "PVDD_PERI_2V8";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "PVDD_PERI_3V3";
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+				};
+
+				ldo18_reg: LDO18 {
+					regulator-name = "PVDD_EMMC_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo19_reg: LDO19 {
+					regulator-name = "PVDD_TFLASH_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo20_reg: LDO20 {
+					regulator-name = "PVDD_BTWIFI_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo21_reg: LDO21 {
+					regulator-name = "PVDD_CAM1IO_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo23_reg: LDO23 {
+					regulator-name = "PVDD_MIFS_1V1";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo24_reg: LDO24 {
+					regulator-name = "PVDD_CAM1_AVDD_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo26_reg: LDO26 {
+					regulator-name = "PVDD_CAM0_AF_2V8";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				ldo27_reg: LDO27 {
+					regulator-name = "PVDD_G3DS_1V0";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo28_reg: LDO28 {
+					regulator-name = "PVDD_TSP_3V3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo29_reg: LDO29 {
+					regulator-name = "PVDD_AUDIO_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo31_reg: LDO31 {
+					regulator-name = "PVDD_PERI_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo32_reg: LDO32 {
+					regulator-name = "PVDD_LCD_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo33_reg: LDO33 {
+					regulator-name = "PVDD_CAM0IO_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo35_reg: LDO35 {
+					regulator-name = "PVDD_CAM0_DVDD_1V2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo38_reg: LDO38 {
+					regulator-name = "PVDD_CAM0_AVDD_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "PVDD_MIF_1V1";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "PVDD_INT_1V0";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "PVDD_G3D_1V0";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "PVDD_LPDDR3_1V2";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "PVDD_KFC_1V0";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "VIN_LLDO_1V4";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "VIN_MLDO_2V0";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "VIN_HLDO_3V5";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3500000>;
+					regulator-always-on;
+				};
+
+				buck10_reg: BUCK10 {
+					regulator-name = "PVDD_EMMCF_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "SW-TACT1";
+			gpios = <&gpx2 7 1>;
+			linux,code = <KEY_WAKEUP>;
+			gpio-key,wakeup;
+		};
+	};
 };

arch/arm/boot/dts/exynos5420-smdk5420.dts

@@ -31,6 +31,43 @@ oscclk {
 		};
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd: fixed-regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd-supply";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		dbvdd: fixed-regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "dbvdd-supply";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		spkvdd: fixed-regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "spkvdd-supply";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+
+	rtc@101E0000 {
+		status = "okay";
+	};
+
 	mmc@12200000 {
 		status = "okay";
 		broken-cd;
@@ -120,4 +157,220 @@ hdmiddc@50 {
 			reg = <0x50>;
 		};
 	};
+
+	hsi2c_4: i2c@12CA0000 {
+		status = "okay";
+
+		s2mps11_pmic@66 {
+			compatible = "samsung,s2mps11-pmic";
+			reg = <0x66>;
+			s2mps11,buck2-ramp-delay = <12>;
+			s2mps11,buck34-ramp-delay = <12>;
+			s2mps11,buck16-ramp-delay = <12>;
+			s2mps11,buck6-ramp-enable = <1>;
+			s2mps11,buck2-ramp-enable = <1>;
+			s2mps11,buck3-ramp-enable = <1>;
+			s2mps11,buck4-ramp-enable = <1>;
+
+			s2mps11_osc: clocks {
+				#clock-cells = <1>;
+				clock-output-names = "s2mps11_ap",
+						"s2mps11_cp", "s2mps11_bt";
+			};
+
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "vdd_ldo1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "vdd_ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "vdd_ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "vdd_ldo6";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "vdd_ldo7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "vdd_ldo8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "vdd_ldo9";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "vdd_ldo10";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "vdd_ldo11";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "vdd_ldo12";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "vdd_ldo13";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "vdd_ldo15";
+					regulator-min-microvolt = <3100000>;
+					regulator-max-microvolt = <3100000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "vdd_ldo16";
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					regulator-always-on;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "tsp_avdd";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo19_reg: LDO19 {
+					regulator-name = "vdd_sd";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo24_reg: LDO24 {
+					regulator-name = "tsp_io";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "vdd_mem";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "vdd_kfc";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "vdd_1.0v_ldo";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "vdd_1.8v_ldo";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "vdd_2.8v_ldo";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3750000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck10_reg: BUCK10 {
+					regulator-name = "vdd_vmem";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
 };

arch/arm/boot/dts/exynos5440.dtsi

@@ -9,6 +9,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/clock/exynos5440.h>
 #include "skeleton.dtsi"
 
 / {
@@ -105,7 +106,7 @@ serial@B0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xB0000 0x1000>;
 		interrupts = <0 2 0>;
-		clocks = <&clock 21>, <&clock 21>;
+		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
@@ -113,7 +114,7 @@ serial@C0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xC0000 0x1000>;
 		interrupts = <0 3 0>;
-		clocks = <&clock 21>, <&clock 21>;
+		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
@@ -125,7 +126,7 @@ spi_0: spi@D0000 {
 		#size-cells = <0>;
 		samsung,spi-src-clk = <0>;
 		num-cs = <1>;
-		clocks = <&clock 21>, <&clock 16>;
+		clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
 		clock-names = "spi", "spi_busclk0";
 	};
 
@@ -161,7 +162,7 @@ i2c@F0000 {
 		interrupts = <0 5 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "i2c";
 	};
 
@@ -171,7 +172,7 @@ i2c@100000 {
 		interrupts = <0 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "i2c";
 	};
 
@@ -179,7 +180,7 @@ watchdog {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x110000 0x1000>;
 		interrupts = <0 1 0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "watchdog";
 	};
 
@@ -190,7 +191,7 @@ gmac: ethernet@00230000 {
 		interrupts = <0 31 4>;
 		interrupt-names = "macirq";
 		phy-mode = "sgmii";
-		clocks = <&clock 25>;
+		clocks = <&clock CLK_GMAC0>;
 		clock-names = "stmmaceth";
 	};
 
@@ -206,7 +207,7 @@ rtc {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
 		interrupts = <0 17 0>, <0 16 0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "rtc";
 	};
 
@@ -214,7 +215,7 @@ tmuctrl_0: tmuctrl@160118 {
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x160118 0x230>, <0x160368 0x10>;
 		interrupts = <0 58 0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 	};
 
@@ -222,7 +223,7 @@ tmuctrl_1: tmuctrl@16011C {
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x16011C 0x230>, <0x160368 0x10>;
 		interrupts = <0 58 0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 	};
 
@@ -230,7 +231,7 @@ tmuctrl_2: tmuctrl@160120 {
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x160120 0x230>, <0x160368 0x10>;
 		interrupts = <0 58 0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 	};
 
@@ -238,7 +239,7 @@ sata@210000 {
 		compatible = "snps,exynos5440-ahci";
 		reg = <0x210000 0x10000>;
 		interrupts = <0 30 0>;
-		clocks = <&clock 23>;
+		clocks = <&clock CLK_SATA>;
 		clock-names = "sata";
 	};
 
@@ -246,7 +247,7 @@ ohci@220000 {
 		compatible = "samsung,exynos5440-ohci";
 		reg = <0x220000 0x1000>;
 		interrupts = <0 29 0>;
-		clocks = <&clock 24>;
+		clocks = <&clock CLK_USB>;
 		clock-names = "usbhost";
 	};
 
@@ -254,7 +255,7 @@ ehci@221000 {
 		compatible = "samsung,exynos5440-ehci";
 		reg = <0x221000 0x1000>;
 		interrupts = <0 29 0>;
-		clocks = <&clock 24>;
+		clocks = <&clock CLK_USB>;
 		clock-names = "usbhost";
 	};
 
@@ -264,7 +265,7 @@ pcie@290000 {
 			0x270000 0x1000
 			0x271000 0x40>;
 		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
-		clocks = <&clock 28>, <&clock 27>;
+		clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
 		clock-names = "pcie", "pcie_bus";
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -285,7 +286,7 @@ pcie@2a0000 {
 			0x272000 0x1000
 			0x271040 0x40>;
 		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
-		clocks = <&clock 29>, <&clock 27>;
+		clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
 		clock-names = "pcie", "pcie_bus";
 		#address-cells = <3>;
 		#size-cells = <2>;

arch/arm/include/debug/samsung.S

@@ -9,7 +9,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <plat/regs-serial.h>
+#include <linux/serial_s3c.h>
 
 /* The S5PV210/S5PC110 implementations are as belows. */
 

arch/arm/mach-exynos/common.c

@@ -20,6 +20,7 @@
 #include <clocksource/samsung_pwm.h>
 #include <linux/sched.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <linux/of_irq.h>
@@ -40,7 +41,6 @@
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 
 #include "common.h"
 #include "regs-pmu.h"

arch/arm/mach-exynos/include/mach/uncompress.h

-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H __FILE__
-
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static unsigned int __raw_readl(unsigned int ptr)
-{
-	return *((volatile unsigned int *)ptr);
-}
-
-static void arch_detect_cpu(void)
-{
-	u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID);
-
-	/*
-	 * product_id is bits 31:12
-	 * bits 23:20 describe the exynosX family
-	 * bits 27:24 describe the exynosX family in exynos5420
-	 */
-	chip_id >>= 20;
-
-	if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50)
-		uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-	else
-		uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-
-	/*
-	 * For preventing FIFO overrun or infinite loop of UART console,
-	 * fifo_max should be the minimum fifo size of all of the UART channels
-	 */
-	fifo_mask = S5PV210_UFSTAT_TXMASK;
-	fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
-}
-#endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-exynos/pm.c

@@ -35,56 +35,6 @@
 #include "common.h"
 #include "regs-pmu.h"
 
-#define EXYNOS4_EPLL_LOCK			(S5P_VA_CMU + 0x0C010)
-#define EXYNOS4_VPLL_LOCK			(S5P_VA_CMU + 0x0C020)
-
-#define EXYNOS4_EPLL_CON0			(S5P_VA_CMU + 0x0C110)
-#define EXYNOS4_EPLL_CON1			(S5P_VA_CMU + 0x0C114)
-#define EXYNOS4_VPLL_CON0			(S5P_VA_CMU + 0x0C120)
-#define EXYNOS4_VPLL_CON1			(S5P_VA_CMU + 0x0C124)
-
-#define EXYNOS4_CLKSRC_MASK_TOP			(S5P_VA_CMU + 0x0C310)
-#define EXYNOS4_CLKSRC_MASK_CAM			(S5P_VA_CMU + 0x0C320)
-#define EXYNOS4_CLKSRC_MASK_TV			(S5P_VA_CMU + 0x0C324)
-#define EXYNOS4_CLKSRC_MASK_LCD0		(S5P_VA_CMU + 0x0C334)
-#define EXYNOS4_CLKSRC_MASK_MAUDIO		(S5P_VA_CMU + 0x0C33C)
-#define EXYNOS4_CLKSRC_MASK_FSYS		(S5P_VA_CMU + 0x0C340)
-#define EXYNOS4_CLKSRC_MASK_PERIL0		(S5P_VA_CMU + 0x0C350)
-#define EXYNOS4_CLKSRC_MASK_PERIL1		(S5P_VA_CMU + 0x0C354)
-
-#define EXYNOS4_CLKSRC_MASK_DMC			(S5P_VA_CMU + 0x10300)
-
-#define EXYNOS4_EPLLCON0_LOCKED_SHIFT		(29)
-#define EXYNOS4_VPLLCON0_LOCKED_SHIFT		(29)
-
-#define EXYNOS4210_CLKSRC_MASK_LCD1		(S5P_VA_CMU + 0x0C338)
-
-static const struct sleep_save exynos4_set_clksrc[] = {
-	{ .reg = EXYNOS4_CLKSRC_MASK_TOP		, .val = 0x00000001, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_CAM		, .val = 0x11111111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_TV			, .val = 0x00000111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_LCD0		, .val = 0x00001111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_MAUDIO		, .val = 0x00000001, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_FSYS		, .val = 0x01011111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_PERIL0		, .val = 0x01111111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_PERIL1		, .val = 0x01110111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_DMC		, .val = 0x00010000, },
-};
-
-static const struct sleep_save exynos4210_set_clksrc[] = {
-	{ .reg = EXYNOS4210_CLKSRC_MASK_LCD1		, .val = 0x00001111, },
-};
-
-static struct sleep_save exynos4_epll_save[] = {
-	SAVE_ITEM(EXYNOS4_EPLL_CON0),
-	SAVE_ITEM(EXYNOS4_EPLL_CON1),
-};
-
-static struct sleep_save exynos4_vpll_save[] = {
-	SAVE_ITEM(EXYNOS4_VPLL_CON0),
-	SAVE_ITEM(EXYNOS4_VPLL_CON1),
-};
-
 static struct sleep_save exynos5_sys_save[] = {
 	SAVE_ITEM(EXYNOS5_SYS_I2C_CFG),
 };
@@ -124,10 +74,7 @@ static void exynos_pm_prepare(void)
 
 	s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
 
-	if (!soc_is_exynos5250()) {
-		s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
-		s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
-	} else {
+	if (soc_is_exynos5250()) {
 		s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save));
 		/* Disable USE_RETENTION of JPEG_MEM_OPTION */
 		tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION);
@@ -143,15 +90,6 @@ static void exynos_pm_prepare(void)
 	/* ensure at least INFORM0 has the resume address */
 
 	__raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
-
-	/* Before enter central sequence mode, clock src register have to set */
-
-	if (!soc_is_exynos5250())
-		s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
-
-	if (soc_is_exynos4210())
-		s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
-
 }
 
 static int exynos_pm_add(struct device *dev, struct subsys_interface *sif)
@@ -162,73 +100,6 @@ static int exynos_pm_add(struct device *dev, struct subsys_interface *sif)
 	return 0;
 }
 
-static unsigned long pll_base_rate;
-
-static void exynos4_restore_pll(void)
-{
-	unsigned long pll_con, locktime, lockcnt;
-	unsigned long pll_in_rate;
-	unsigned int p_div, epll_wait = 0, vpll_wait = 0;
-
-	if (pll_base_rate == 0)
-		return;
-
-	pll_in_rate = pll_base_rate;
-
-	/* EPLL */
-	pll_con = exynos4_epll_save[0].val;
-
-	if (pll_con & (1 << 31)) {
-		pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT);
-		p_div = (pll_con >> PLL46XX_PDIV_SHIFT);
-
-		pll_in_rate /= 1000000;
-
-		locktime = (3000 / pll_in_rate) * p_div;
-		lockcnt = locktime * 10000 / (10000 / pll_in_rate);
-
-		__raw_writel(lockcnt, EXYNOS4_EPLL_LOCK);
-
-		s3c_pm_do_restore_core(exynos4_epll_save,
-					ARRAY_SIZE(exynos4_epll_save));
-		epll_wait = 1;
-	}
-
-	pll_in_rate = pll_base_rate;
-
-	/* VPLL */
-	pll_con = exynos4_vpll_save[0].val;
-
-	if (pll_con & (1 << 31)) {
-		pll_in_rate /= 1000000;
-		/* 750us */
-		locktime = 750;
-		lockcnt = locktime * 10000 / (10000 / pll_in_rate);
-
-		__raw_writel(lockcnt, EXYNOS4_VPLL_LOCK);
-
-		s3c_pm_do_restore_core(exynos4_vpll_save,
-					ARRAY_SIZE(exynos4_vpll_save));
-		vpll_wait = 1;
-	}
-
-	/* Wait PLL locking */
-
-	do {
-		if (epll_wait) {
-			pll_con = __raw_readl(EXYNOS4_EPLL_CON0);
-			if (pll_con & (1 << EXYNOS4_EPLLCON0_LOCKED_SHIFT))
-				epll_wait = 0;
-		}
-
-		if (vpll_wait) {
-			pll_con = __raw_readl(EXYNOS4_VPLL_CON0);
-			if (pll_con & (1 << EXYNOS4_VPLLCON0_LOCKED_SHIFT))
-				vpll_wait = 0;
-		}
-	} while (epll_wait || vpll_wait);
-}
-
 static struct subsys_interface exynos_pm_interface = {
 	.name		= "exynos_pm",
 	.subsys		= &exynos_subsys,
@@ -237,7 +108,6 @@ static struct subsys_interface exynos_pm_interface = {
 
 static __init int exynos_pm_drvinit(void)
 {
-	struct clk *pll_base;
 	unsigned int tmp;
 
 	if (soc_is_exynos5440())
@@ -251,15 +121,6 @@ static __init int exynos_pm_drvinit(void)
 	tmp |= ((0xFF << 8) | (0x1F << 1));
 	__raw_writel(tmp, S5P_WAKEUP_MASK);
 
-	if (!soc_is_exynos5250()) {
-		pll_base = clk_get(NULL, "xtal");
-
-		if (!IS_ERR(pll_base)) {
-			pll_base_rate = clk_get_rate(pll_base);
-			clk_put(pll_base);
-		}
-	}
-
 	return subsys_interface_register(&exynos_pm_interface);
 }
 arch_initcall(exynos_pm_drvinit);
@@ -343,13 +204,8 @@ static void exynos_pm_resume(void)
 
 	s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
 
-	if (!soc_is_exynos5250()) {
-		exynos4_restore_pll();
-
-#ifdef CONFIG_SMP
+	if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250())
 		scu_enable(S5P_VA_SCU);
-#endif
-	}
 
 early_wakeup:
 

arch/arm/mach-exynos/pm_domains.c

@@ -22,8 +22,6 @@
 #include <linux/of_platform.h>
 #include <linux/sched.h>
 
-#include <plat/devs.h>
-
 #include "regs-pmu.h"
 
 /*

arch/arm/mach-s3c24xx/Kconfig

@@ -521,7 +521,6 @@ config MACH_ANUBIS
 	select HAVE_PATA_PLATFORM
 	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
-	select S3C24XX_GPIO_EXTRA64
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_USB_HOST
 	help
@@ -562,7 +561,6 @@ config MACH_OSIRIS
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
-	select S3C24XX_GPIO_EXTRA128
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST

arch/arm/mach-s3c24xx/clock-s3c2410.c

@@ -30,13 +30,12 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 

arch/arm/mach-s3c24xx/clock-s3c2412.c

@@ -31,13 +31,12 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 

arch/arm/mach-s3c24xx/clock-s3c2440.c

@@ -34,6 +34,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <mach/hardware.h>
 #include <linux/atomic.h>
@@ -43,7 +44,6 @@
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
-#include <plat/regs-serial.h>
 
 /* S3C2440 extended clock support */
 

arch/arm/mach-s3c24xx/common.c

@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
@@ -44,7 +45,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
@@ -240,7 +240,6 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 	} else {
 		samsung_cpu_id = s3c24xx_read_idcode_v4();
 	}
-	s3c24xx_init_cpu();
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 

arch/arm/mach-s3c24xx/dma-s3c2410.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
@@ -23,7 +24,6 @@
 #include <plat/cpu.h>
 #include <plat/dma-s3c24xx.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>

arch/arm/mach-s3c24xx/dma-s3c2412.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <mach/dma.h>
@@ -23,7 +24,6 @@
 #include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>

arch/arm/mach-s3c24xx/dma-s3c2440.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
@@ -23,7 +24,6 @@
 #include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>

arch/arm/mach-s3c24xx/dma-s3c2443.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <mach/dma.h>
@@ -23,7 +24,6 @@
 #include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>

arch/arm/mach-s3c24xx/include/mach/debug-macro.S

@@ -14,7 +14,7 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
+#include <linux/serial_s3c.h>
 
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)

arch/arm/plat-samsung/include/plat/rtc-core.h → arch/arm/mach-s3c24xx/include/mach/rtc-core.h

-/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h
- *
+/*
  * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
  *
  * Samsung RTC Controller core functions
@@ -9,19 +8,19 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_PLAT_RTC_CORE_H
-#define __ASM_PLAT_RTC_CORE_H __FILE__
+#ifndef __RTC_CORE_H
+#define __RTC_CORE_H __FILE__
 
 /* These functions are only for use with the core support code, such as
  * the cpu specific initialisation code
  */
 
+extern struct platform_device s3c_device_rtc;
+
 /* re-define device name depending on support. */
 static inline void s3c_rtc_setname(char *name)
 {
-#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
 	s3c_device_rtc.name = name;
-#endif
 }
 
-#endif /* __ASM_PLAT_RTC_CORE_H */
+#endif /* __RTC_CORE_H */

arch/arm/mach-s3c24xx/include/mach/tick.h

-/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C2410 - timer tick support
- */
-
-#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
-
-static inline int s3c24xx_ostimer_pending(void)
-{
-	return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
-}

arch/arm/mach-s3c24xx/mach-amlm5900.c

@@ -37,6 +37,7 @@
 #include <linux/platform_device.h>
 #include <linux/proc_fs.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -49,7 +50,6 @@
 #include <asm/mach-types.h>
 #include <mach/fb.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>

arch/arm/mach-s3c24xx/mach-anubis.c

@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/i2c.h>
@@ -32,7 +33,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/dm9000.h>
 #include <linux/platform_device.h>
 
@@ -33,7 +34,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>

arch/arm/mach-s3c24xx/mach-bast.c

@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/dm9000.h>
 #include <linux/ata_platform.h>
@@ -55,7 +56,6 @@
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "bast.h"

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -35,6 +35,7 @@
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -81,7 +82,6 @@
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -62,7 +63,6 @@
 #include <plat/gpio-cfg.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/mach-jive.c

@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 
@@ -31,7 +32,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -23,6 +23,7 @@
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/dm9000.h>
 #include <linux/platform_data/at24.h>
 #include <linux/platform_device.h>
@@ -37,7 +38,6 @@
 #include <mach/fb.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-lcd.h>

arch/arm/mach-s3c24xx/mach-n30.c

@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/timer.h>
 #include <linux/io.h>
 #include <linux/mmc/host.h>
@@ -43,7 +44,6 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/regs-serial.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c24xx/mach-nexcoder.c

@@ -21,6 +21,7 @@
 #include <linux/gpio.h>
 #include <linux/string.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -38,7 +39,6 @@
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>

arch/arm/mach-s3c24xx/mach-osiris.c

@@ -18,6 +18,7 @@
 #include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/clk.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
@@ -44,7 +45,6 @@
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include <mach/hardware.h>

arch/arm/mach-s3c24xx/mach-otom.c

@@ -15,6 +15,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -32,7 +33,6 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/mach-qt2410.c

@@ -31,6 +31,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
 #include <linux/io.h>
@@ -49,7 +50,6 @@
 
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-lcd.h>
-#include <plat/regs-serial.h>
 #include <mach/fb.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -21,6 +21,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/device.h>
@@ -57,7 +58,6 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 #include <plat/gpio-cfg.h>
 

arch/arm/mach-s3c24xx/mach-rx3715.c

@@ -23,6 +23,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/serial.h>
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
@@ -49,7 +50,6 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/mach-s3c2416-dt.c

@@ -19,13 +19,13 @@
 #include <linux/irqchip.h>
 #include <linux/of_platform.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <asm/mach/arch.h>
 #include <mach/map.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 
 #include "common.h"
 

arch/arm/mach-s3c24xx/mach-smdk2410.c

@@ -35,6 +35,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -46,7 +47,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/devs.h>

arch/arm/mach-s3c24xx/mach-smdk2413.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -33,7 +34,6 @@
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 

arch/arm/mach-s3c24xx/mach-smdk2416.c

@@ -18,6 +18,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mtd/partitions.h>
@@ -34,7 +35,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-s3c2443-clock.h>

arch/arm/mach-s3c24xx/mach-smdk2440.c

@@ -20,6 +20,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -31,7 +32,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 

arch/arm/mach-s3c24xx/mach-smdk2443.c

@@ -20,6 +20,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -31,7 +32,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 

arch/arm/mach-s3c24xx/mach-tct_hammer.c

@@ -33,6 +33,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -44,7 +45,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c24xx/mach-vr1000.c

@@ -25,6 +25,7 @@
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -45,7 +46,6 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "bast.h"

arch/arm/mach-s3c24xx/mach-vstms.c

@@ -16,6 +16,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
@@ -32,7 +33,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 

arch/arm/mach-s3c24xx/pm.c

@@ -33,9 +33,9 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-irq.h>

arch/arm/mach-s3c24xx/s3c2410.c

@@ -21,6 +21,7 @@
 #include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
@@ -37,7 +38,6 @@
 #include <plat/cpu-freq.h>
 
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>

arch/arm/mach-s3c24xx/s3c2412.c

@@ -20,6 +20,7 @@
 #include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/reboot.h>
@@ -43,7 +44,6 @@
 #include <plat/nand-core.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/s3c2416.c

@@ -48,6 +48,7 @@
 #include <asm/system_misc.h>
 
 #include <mach/regs-s3c2443-clock.h>
+#include <mach/rtc-core.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -61,7 +62,6 @@
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
 #include <plat/adc-core.h>
-#include <plat/rtc-core.h>
 #include <plat/spi-core.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/s3c2443.c

@@ -34,6 +34,7 @@
 #include <asm/system_misc.h>
 
 #include <mach/regs-s3c2443-clock.h>
+#include <mach/rtc-core.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -43,7 +44,6 @@
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
 #include <plat/adc-core.h>
-#include <plat/rtc-core.h>
 #include <plat/spi-core.h>
 
 static struct map_desc s3c2443_iodesc[] __initdata = {

arch/arm/mach-s3c24xx/s3c244x.c

@@ -17,6 +17,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/device.h>
@@ -35,7 +36,6 @@
 #include <plat/cpu-freq.h>
 
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 
 #include <plat/clock.h>

arch/arm/mach-s3c24xx/sleep-s3c2410.S

@@ -25,13 +25,13 @@
 */
 
 #include <linux/linkage.h>
+#include <linux/serial_s3c.h>
 #include <asm/assembler.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
 
 #include "regs-mem.h"
 

arch/arm/mach-s3c24xx/sleep.S

@@ -25,13 +25,13 @@
 */
 
 #include <linux/linkage.h>
+#include <linux/serial_s3c.h>
 #include <asm/assembler.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
 
 /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
  * reset the UART configuration, only enable if you really need this!

arch/arm/mach-s3c64xx/common.c

@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
@@ -50,7 +51,6 @@
 #include <plat/irq-uart.h>
 #include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
-#include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
 
 #include "common.h"

arch/arm/mach-s3c64xx/include/mach/debug-macro.S

@@ -12,8 +12,8 @@
 
 /* pull in the relevant register and map files. */
 
+#include <linux/serial_s3c.h>
 #include <mach/map.h>
-#include <plat/regs-serial.h>
 
 	/* note, for the boot process to work we have to keep the UART
 	 * virtual address aligned to an 1MiB boundary for the L1

arch/arm/mach-s3c64xx/include/mach/tick.h

-/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-#include <linux/irqchip/arm-vic.h>
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_6400_TICK_H */

arch/arm/mach-s3c64xx/irq-pm.c

@@ -20,13 +20,13 @@
 #include <linux/syscore_ops.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/of.h>
 
 #include <mach/map.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>

arch/arm/mach-s3c64xx/mach-anw6410.c

@@ -20,6 +20,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -41,7 +42,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
 #include <linux/io.h>
@@ -51,7 +52,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/regs-serial.h>
 #include <plat/fb.h>
 #include <plat/sdhci.h>
 #include <plat/gpio-cfg.h>

arch/arm/mach-s3c64xx/mach-hmt.c

@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -33,7 +34,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/gpio-samsung.h>
 #include <plat/fb.h>

arch/arm/mach-s3c64xx/mach-mini6410.c

@@ -22,6 +22,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/types.h>
 
 #include <asm/mach-types.h>
@@ -38,7 +39,6 @@
 #include <plat/fb.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/mmc-sdhci-s3c.h>
-#include <plat/regs-serial.h>
 #include <plat/sdhci.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
 

arch/arm/mach-s3c64xx/mach-ncp.c

@@ -16,6 +16,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -36,7 +37,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 

arch/arm/mach-s3c64xx/mach-real6410.c

@@ -23,6 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/types.h>
 
 #include <asm/mach-types.h>
@@ -38,7 +39,6 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/regs-serial.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include <video/platform_lcd.h>

arch/arm/mach-s3c64xx/mach-smartq.c

@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/spi/spi_gpio.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/platform_data/s3c-hsotg.h>
@@ -33,7 +34,6 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <linux/platform_data/hwmon-s3c.h>
-#include <plat/regs-serial.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/sdhci.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>

arch/arm/mach-s3c64xx/mach-smdk6400.c

@@ -16,6 +16,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
@@ -29,8 +30,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <plat/regs-serial.h>
-
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -55,7 +56,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 #include <linux/platform_data/ata-samsung_cf.h>

arch/arm/mach-s3c64xx/s3c6400.c

@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
 
@@ -34,7 +35,6 @@
 #include <asm/irq.h>
 
 #include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/s3c6410.c

@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
 
@@ -35,7 +36,6 @@
 #include <asm/irq.h>
 
 #include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu.h>

arch/arm/mach-s5p64x0/common.c

@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
@@ -50,7 +51,6 @@
 #include <plat/gpio-cfg.h>
 #include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
-#include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
 
 #include "common.h"

arch/arm/mach-s5p64x0/include/mach/debug-macro.S

@@ -10,11 +10,10 @@
 
 /* pull in the relevant register and map files. */
 
+#include <linux/serial_s3c.h>
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-#include <plat/regs-serial.h>
-
 	.macro addruart, rp, rv, tmp
 		mov	\rp, #0xE0000000
 		orr	\rp, \rp, #0x00100000

arch/arm/mach-s5p64x0/irq-pm.c

@@ -14,9 +14,9 @@
 
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
-#include <plat/regs-serial.h>
 #include <plat/pm.h>
 
 #include <mach/regs-gpio.h>

arch/arm/mach-s5p64x0/mach-smdk6440.c

@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -39,7 +40,6 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/regs-serial.h>
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>

arch/arm/mach-s5p64x0/mach-smdk6450.c

@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -39,7 +40,6 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/regs-serial.h>
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>

arch/arm/mach-s5pc100/common.c

@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
@@ -49,7 +50,6 @@
 #include <plat/onenand-core.h>
 #include <plat/pwm-core.h>
 #include <plat/spi-core.h>
-#include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
 
 #include "common.h"

arch/arm/mach-s5pc100/include/mach/debug-macro.S

@@ -13,8 +13,8 @@
 
 /* pull in the relevant register and map files. */
 
+#include <linux/serial_s3c.h>
 #include <mach/map.h>
-#include <plat/regs-serial.h>
 
 	/* note, for the boot process to work we have to keep the UART
 	 * virtual address aligned to an 1MiB boundary for the L1

arch/arm/mach-s5pc100/include/mach/tick.h

-/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S3C64XX - Timer tick support definitions
- *
- * Based on mach-s3c6400/include/mach/tick.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-#include <linux/irqchip/arm-vic.h>
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */

arch/arm/mach-s5pc100/mach-smdkc100.c

@@ -16,6 +16,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -37,7 +38,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <plat/gpio-cfg.h>
 
 #include <plat/clock.h>

arch/arm/mach-s5pv210/common.c

@@ -24,6 +24,7 @@
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <asm/proc-fns.h>
 #include <asm/mach/arch.h>
@@ -46,7 +47,6 @@
 #include <plat/pwm-core.h>
 #include <plat/tv-core.h>
 #include <plat/spi-core.h>
-#include <plat/regs-serial.h>
 
 #include "common.h"
 

arch/arm/mach-s5pv210/include/mach/debug-macro.S

@@ -12,8 +12,8 @@
 
 /* pull in the relevant register and map files. */
 
+#include <linux/serial_s3c.h>
 #include <mach/map.h>
-#include <plat/regs-serial.h>
 
 	/* note, for the boot process to work we have to keep the UART
 	 * virtual address aligned to an 1MiB boundary for the L1

arch/arm/mach-s5pv210/mach-aquila.c

@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/fb.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -32,7 +33,6 @@
 #include <mach/regs-clock.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>

arch/arm/mach-s5pv210/mach-goni.c

@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/fb.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -39,7 +40,6 @@
 #include <mach/regs-clock.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>

arch/arm/mach-s5pv210/mach-smdkc110.c

@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/i2c.h>
 #include <linux/device.h>
 
@@ -23,7 +24,6 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 
-#include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/ata-samsung_cf.h>

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/device.h>
 #include <linux/dm9000.h>
 #include <linux/fb.h>
@@ -32,7 +33,6 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 
-#include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
 #include <plat/gpio-cfg.h>
 #include <plat/devs.h>

arch/arm/mach-s5pv210/mach-torbreck.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -22,7 +23,6 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 
-#include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/i2c-s3c2410.h>