Skip to content

L
linux
Commit cf2afdc5 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge branches 'samsung/cleanup', 'samsung/exynos-clk' and 'samsung/exynos-clk2' into next/cleanup3 

These are dependencies for the following Samsung branches
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 32adc19d d9671ca9 86feafeb e11d919e
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1445 additions and 1294 deletions
Documentation/devicetree/bindings/arm/samsung/pmu.txt 0 → 100644
View file @ cf2afdc5
SAMSUNG Exynos SoC series PMU Registers
Properties:
- compatible : should contain two values. First value must be one from following list:
- "samsung,exynos5250-pmu" - for Exynos5250 SoC,
- "samsung,exynos5420-pmu" - for Exynos5420 SoC.
second value must be always "syscon".
- reg : offset and length of the register set.
Example :
pmu_system_controller: system-controller@10040000 {
compatible = "samsung,exynos5250-pmu", "syscon";
reg = <0x10040000 0x5000>;
};
Documentation/devicetree/bindings/clock/exynos4-clock.txt
View file @ cf2afdc5
...@@ -15,259 +15,12 @@ Required Properties: ...@@ -15,259 +15,12 @@ Required Properties:
- #clock-cells: should be 1. - #clock-cells: should be 1.
The following is the list of clocks generated by the controller. Each clock is Each clock is assigned an identifier and client nodes can use this identifier
assigned an identifier and client nodes use this identifier to specify the to specify the clock which they consume.
clock which they consume. Some of the clocks are available only on a particular
Exynos4 SoC and this is specified where applicable.
[Core Clocks]
Clock ID SoC (if specific)
-----------------------------------------------
xxti 1
xusbxti 2
fin_pll 3
fout_apll 4
fout_mpll 5
fout_epll 6
fout_vpll 7
sclk_apll 8
sclk_mpll 9
sclk_epll 10
sclk_vpll 11
arm_clk 12
aclk200 13
aclk100 14
aclk160 15
aclk133 16
mout_mpll_user_t 17 Exynos4x12
mout_mpll_user_c 18 Exynos4x12
mout_core 19
mout_apll 20
[Clock Gate for Special Clocks]
Clock ID SoC (if specific)
-----------------------------------------------
sclk_fimc0 128
sclk_fimc1 129
sclk_fimc2 130
sclk_fimc3 131
sclk_cam0 132
sclk_cam1 133
sclk_csis0 134
sclk_csis1 135
sclk_hdmi 136
sclk_mixer 137
sclk_dac 138
sclk_pixel 139
sclk_fimd0 140
sclk_mdnie0 141 Exynos4412
sclk_mdnie_pwm0 12 142 Exynos4412
sclk_mipi0 143
sclk_audio0 144
sclk_mmc0 145
sclk_mmc1 146
sclk_mmc2 147
sclk_mmc3 148
sclk_mmc4 149
sclk_sata 150 Exynos4210
sclk_uart0 151
sclk_uart1 152
sclk_uart2 153
sclk_uart3 154
sclk_uart4 155
sclk_audio1 156
sclk_audio2 157
sclk_spdif 158
sclk_spi0 159
sclk_spi1 160
sclk_spi2 161
sclk_slimbus 162
sclk_fimd1 163 Exynos4210
sclk_mipi1 164 Exynos4210
sclk_pcm1 165
sclk_pcm2 166
sclk_i2s1 167
sclk_i2s2 168
sclk_mipihsi 169 Exynos4412
sclk_mfc 170
sclk_pcm0 171
sclk_g3d 172
sclk_pwm_isp 173 Exynos4x12
sclk_spi0_isp 174 Exynos4x12
sclk_spi1_isp 175 Exynos4x12
sclk_uart_isp 176 Exynos4x12
sclk_fimg2d 177
[Peripheral Clock Gates]
Clock ID SoC (if specific)
-----------------------------------------------
fimc0 256
fimc1 257
fimc2 258
fimc3 259
csis0 260
csis1 261
jpeg 262
smmu_fimc0 263
smmu_fimc1 264
smmu_fimc2 265
smmu_fimc3 266
smmu_jpeg 267
vp 268
mixer 269
tvenc 270 Exynos4210
hdmi 271
smmu_tv 272
mfc 273
smmu_mfcl 274
smmu_mfcr 275
g3d 276
g2d 277
rotator 278 Exynos4210
mdma 279 Exynos4210
smmu_g2d 280 Exynos4210
smmu_rotator 281 Exynos4210
smmu_mdma 282 Exynos4210
fimd0 283
mie0 284
mdnie0 285 Exynos4412
dsim0 286
smmu_fimd0 287
fimd1 288 Exynos4210
mie1 289 Exynos4210
dsim1 290 Exynos4210
smmu_fimd1 291 Exynos4210
pdma0 292
pdma1 293
pcie_phy 294
sata_phy 295 Exynos4210
tsi 296
sdmmc0 297
sdmmc1 298
sdmmc2 299
sdmmc3 300
sdmmc4 301
sata 302 Exynos4210
sromc 303
usb_host 304
usb_device 305
pcie 306
onenand 307
nfcon 308
smmu_pcie 309
gps 310
smmu_gps 311
uart0 312
uart1 313
uart2 314
uart3 315
uart4 316
i2c0 317
i2c1 318
i2c2 319
i2c3 320
i2c4 321
i2c5 322
i2c6 323
i2c7 324
i2c_hdmi 325
tsadc 326
spi0 327
spi1 328
spi2 329
i2s1 330
i2s2 331
pcm0 332
i2s0 333
pcm1 334
pcm2 335
pwm 336
slimbus 337
spdif 338
ac97 339
modemif 340
chipid 341
sysreg 342
hdmi_cec 343
mct 344
wdt 345
rtc 346
keyif 347
audss 348
mipi_hsi 349 Exynos4210
mdma2 350 Exynos4210
pixelasyncm0 351
pixelasyncm1 352
fimc_lite0 353 Exynos4x12
fimc_lite1 354 Exynos4x12
ppmuispx 355 Exynos4x12
ppmuispmx 356 Exynos4x12
fimc_isp 357 Exynos4x12
fimc_drc 358 Exynos4x12
fimc_fd 359 Exynos4x12
mcuisp 360 Exynos4x12
gicisp 361 Exynos4x12
smmu_isp 362 Exynos4x12
smmu_drc 363 Exynos4x12
smmu_fd 364 Exynos4x12
smmu_lite0 365 Exynos4x12
smmu_lite1 366 Exynos4x12
mcuctl_isp 367 Exynos4x12
mpwm_isp 368 Exynos4x12
i2c0_isp 369 Exynos4x12
i2c1_isp 370 Exynos4x12
mtcadc_isp 371 Exynos4x12
pwm_isp 372 Exynos4x12
wdt_isp 373 Exynos4x12
uart_isp 374 Exynos4x12
asyncaxim 375 Exynos4x12
smmu_ispcx 376 Exynos4x12
spi0_isp 377 Exynos4x12
spi1_isp 378 Exynos4x12
pwm_isp_sclk 379 Exynos4x12
spi0_isp_sclk 380 Exynos4x12
spi1_isp_sclk 381 Exynos4x12
uart_isp_sclk 382 Exynos4x12
tmu_apbif 383
[Mux Clocks]
Clock ID SoC (if specific)
-----------------------------------------------
mout_fimc0 384
mout_fimc1 385
mout_fimc2 386
mout_fimc3 387
mout_cam0 388
mout_cam1 389
mout_csis0 390
mout_csis1 391
mout_g3d0 392
mout_g3d1 393
mout_g3d 394
aclk400_mcuisp 395 Exynos4x12
[Div Clocks]
Clock ID SoC (if specific)
-----------------------------------------------
div_isp0 450 Exynos4x12
div_isp1 451 Exynos4x12
div_mcuisp0 452 Exynos4x12
div_mcuisp1 453 Exynos4x12
div_aclk200 454 Exynos4x12
div_aclk400_mcuisp 455 Exynos4x12
All available clocks are defined as preprocessor macros in
dt-bindings/clock/exynos4.h header and can be used in device
tree sources.
Example 1: An example of a clock controller node is listed below. Example 1: An example of a clock controller node is listed below.
...@@ -285,6 +38,6 @@ Example 2: UART controller node that consumes the clock generated by the clock ...@@ -285,6 +38,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
compatible = "samsung,exynos4210-uart"; compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>; reg = <0x13820000 0x100>;
interrupts = <0 54 0>; interrupts = <0 54 0>;
clocks = <&clock 314>, <&clock 153>; clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0"; clock-names = "uart", "clk_uart_baud0";
}; };
Documentation/devicetree/bindings/clock/exynos5250-clock.txt
View file @ cf2afdc5
...@@ -13,163 +13,12 @@ Required Properties: ...@@ -13,163 +13,12 @@ Required Properties:
- #clock-cells: should be 1. - #clock-cells: should be 1.
The following is the list of clocks generated by the controller. Each clock is Each clock is assigned an identifier and client nodes can use this identifier
assigned an identifier and client nodes use this identifier to specify the to specify the clock which they consume.
clock which they consume.
[Core Clocks]
Clock ID
----------------------------
fin_pll 1
[Clock Gate for Special Clocks]
Clock ID
----------------------------
sclk_cam_bayer 128
sclk_cam0 129
sclk_cam1 130
sclk_gscl_wa 131
sclk_gscl_wb 132
sclk_fimd1 133
sclk_mipi1 134
sclk_dp 135
sclk_hdmi 136
sclk_pixel 137
sclk_audio0 138
sclk_mmc0 139
sclk_mmc1 140
sclk_mmc2 141
sclk_mmc3 142
sclk_sata 143
sclk_usb3 144
sclk_jpeg 145
sclk_uart0 146
sclk_uart1 147
sclk_uart2 148
sclk_uart3 149
sclk_pwm 150
sclk_audio1 151
sclk_audio2 152
sclk_spdif 153
sclk_spi0 154
sclk_spi1 155
sclk_spi2 156
div_i2s1 157
div_i2s2 158
sclk_hdmiphy 159
div_pcm0 160
[Peripheral Clock Gates]
Clock ID
----------------------------
gscl0 256
gscl1 257
gscl2 258
gscl3 259
gscl_wa 260
gscl_wb 261
smmu_gscl0 262
smmu_gscl1 263
smmu_gscl2 264
smmu_gscl3 265
mfc 266
smmu_mfcl 267
smmu_mfcr 268
rotator 269
jpeg 270
mdma1 271
smmu_rotator 272
smmu_jpeg 273
smmu_mdma1 274
pdma0 275
pdma1 276
sata 277
usbotg 278
mipi_hsi 279
sdmmc0 280
sdmmc1 281
sdmmc2 282
sdmmc3 283
sromc 284
usb2 285
usb3 286
sata_phyctrl 287
sata_phyi2c 288
uart0 289
uart1 290
uart2 291
uart3 292
uart4 293
i2c0 294
i2c1 295
i2c2 296
i2c3 297
i2c4 298
i2c5 299
i2c6 300
i2c7 301
i2c_hdmi 302
adc 303
spi0 304
spi1 305
spi2 306
i2s1 307
i2s2 308
pcm1 309
pcm2 310
pwm 311
spdif 312
ac97 313
hsi2c0 314
hsi2c1 315
hs12c2 316
hs12c3 317
chipid 318
sysreg 319
pmu 320
cmu_top 321
cmu_core 322
cmu_mem 323
tzpc0 324
tzpc1 325
tzpc2 326
tzpc3 327
tzpc4 328
tzpc5 329
tzpc6 330
tzpc7 331
tzpc8 332
tzpc9 333
hdmi_cec 334
mct 335
wdt 336
rtc 337
tmu 338
fimd1 339
mie1 340
dsim0 341
dp 342
mixer 343
hdmi 344
g2d 345
mdma0 346
smmu_mdma0 347
[Clock Muxes]
Clock ID
----------------------------
mout_hdmi 1024
All available clocks are defined as preprocessor macros in
dt-bindings/clock/exynos5250.h header and can be used in device
tree sources.
Example 1: An example of a clock controller node is listed below. Example 1: An example of a clock controller node is listed below.
...@@ -187,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock ...@@ -187,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
compatible = "samsung,exynos4210-uart"; compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>; reg = <0x13820000 0x100>;
interrupts = <0 54 0>; interrupts = <0 54 0>;
clocks = <&clock 314>, <&clock 153>; clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0"; clock-names = "uart", "clk_uart_baud0";
}; };
Documentation/devicetree/bindings/clock/exynos5420-clock.txt
View file @ cf2afdc5
...@@ -13,184 +13,12 @@ Required Properties: ...@@ -13,184 +13,12 @@ Required Properties:
- #clock-cells: should be 1. - #clock-cells: should be 1.
The following is the list of clocks generated by the controller. Each clock is Each clock is assigned an identifier and client nodes can use this identifier
assigned an identifier and client nodes use this identifier to specify the to specify the clock which they consume.
clock which they consume.
All available clocks are defined as preprocessor macros in
[Core Clocks] dt-bindings/clock/exynos5420.h header and can be used in device
tree sources.
Clock ID
----------------------------
fin_pll 1
[Clock Gate for Special Clocks]
Clock ID
----------------------------
sclk_uart0 128
sclk_uart1 129
sclk_uart2 130
sclk_uart3 131
sclk_mmc0 132
sclk_mmc1 133
sclk_mmc2 134
sclk_spi0 135
sclk_spi1 136
sclk_spi2 137
sclk_i2s1 138
sclk_i2s2 139
sclk_pcm1 140
sclk_pcm2 141
sclk_spdif 142
sclk_hdmi 143
sclk_pixel 144
sclk_dp1 145
sclk_mipi1 146
sclk_fimd1 147
sclk_maudio0 148
sclk_maupcm0 149
sclk_usbd300 150
sclk_usbd301 151
sclk_usbphy300 152
sclk_usbphy301 153
sclk_unipro 154
sclk_pwm 155
sclk_gscl_wa 156
sclk_gscl_wb 157
sclk_hdmiphy 158
[Peripheral Clock Gates]
Clock ID
----------------------------
aclk66_peric 256
uart0 257
uart1 258
uart2 259
uart3 260
i2c0 261
i2c1 262
i2c2 263
i2c3 264
i2c4 265
i2c5 266
i2c6 267
i2c7 268
i2c_hdmi 269
tsadc 270
spi0 271
spi1 272
spi2 273
keyif 274
i2s1 275
i2s2 276
pcm1 277
pcm2 278
pwm 279
spdif 280
i2c8 281
i2c9 282
i2c10 283
aclk66_psgen 300
chipid 301
sysreg 302
tzpc0 303
tzpc1 304
tzpc2 305
tzpc3 306
tzpc4 307
tzpc5 308
tzpc6 309
tzpc7 310
tzpc8 311
tzpc9 312
hdmi_cec 313
seckey 314
mct 315
wdt 316
rtc 317
tmu 318
tmu_gpu 319
pclk66_gpio 330
aclk200_fsys2 350
mmc0 351
mmc1 352
mmc2 353
sromc 354
ufs 355
aclk200_fsys 360
tsi 361
pdma0 362
pdma1 363
rtic 364
usbh20 365
usbd300 366
usbd301 377
aclk400_mscl 380
mscl0 381
mscl1 382
mscl2 383
smmu_mscl0 384
smmu_mscl1 385
smmu_mscl2 386
aclk333 400
mfc 401
smmu_mfcl 402
smmu_mfcr 403
aclk200_disp1 410
dsim1 411
dp1 412
hdmi 413
aclk300_disp1 420
fimd1 421
smmu_fimd1 422
aclk166 430
mixer 431
aclk266 440
rotator 441
mdma1 442
smmu_rotator 443
smmu_mdma1 444
aclk300_jpeg 450
jpeg 451
jpeg2 452
smmu_jpeg 453
aclk300_gscl 460
smmu_gscl0 461
smmu_gscl1 462
gscl_wa 463
gscl_wb 464
gscl0 465
gscl1 466
clk_3aa 467
aclk266_g2d 470
sss 471
slim_sss 472
mdma0 473
aclk333_g2d 480
g2d 481
aclk333_432_gscl 490
smmu_3aa 491
smmu_fimcl0 492
smmu_fimcl1 493
smmu_fimcl3 494
fimc_lite3 495
aclk_g3d 500
g3d 501
smmu_mixer 502
Mux ID
----------------------------
mout_hdmi 640
Divider ID
----------------------------
dout_pixel 768
Example 1: An example of a clock controller node is listed below. Example 1: An example of a clock controller node is listed below.
...@@ -208,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock ...@@ -208,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
compatible = "samsung,exynos4210-uart"; compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>; reg = <0x13820000 0x100>;
interrupts = <0 54 0>; interrupts = <0 54 0>;
clocks = <&clock 259>, <&clock 130>; clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0"; clock-names = "uart", "clk_uart_baud0";
}; };
Documentation/devicetree/bindings/clock/exynos5440-clock.txt
View file @ cf2afdc5
...@@ -12,45 +12,12 @@ Required Properties: ...@@ -12,45 +12,12 @@ Required Properties:
- #clock-cells: should be 1. - #clock-cells: should be 1.
The following is the list of clocks generated by the controller. Each clock is Each clock is assigned an identifier and client nodes can use this identifier
assigned an identifier and client nodes use this identifier to specify the to specify the clock which they consume.
clock which they consume.
All available clocks are defined as preprocessor macros in
dt-bindings/clock/exynos5440.h header and can be used in device
[Core Clocks] tree sources.
Clock ID
----------------------------
xtal 1
arm_clk 2
[Peripheral Clock Gates]
Clock ID
----------------------------
spi_baud 16
pb0_250 17
pr0_250 18
pr1_250 19
b_250 20
b_125 21
b_200 22
sata 23
usb 24
gmac0 25
cs250 26
pb0_250_o 27
pr0_250_o 28
pr1_250_o 29
b_250_o 30
b_125_o 31
b_200_o 32
sata_o 33
usb_o 34
gmac0_o 35
cs250_o 36
Example: An example of a clock controller node is listed below. Example: An example of a clock controller node is listed below.
......
arch/arm/Kconfig.debug
View file @ cf2afdc5
...@@ -1145,7 +1145,7 @@ config DEBUG_UART_8250_FLOW_CONTROL ...@@ -1145,7 +1145,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
config DEBUG_UNCOMPRESS config DEBUG_UNCOMPRESS
bool bool
depends on ARCH_MULTIPLATFORM || ARCH_MSM depends on ARCH_MULTIPLATFORM || ARCH_MSM || ARCH_EXYNOS
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM) (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
help help
...@@ -1161,7 +1161,8 @@ config DEBUG_UNCOMPRESS ...@@ -1161,7 +1161,8 @@ config DEBUG_UNCOMPRESS
config UNCOMPRESS_INCLUDE config UNCOMPRESS_INCLUDE
string string
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
ARCH_EXYNOS
default "mach/uncompress.h" default "mach/uncompress.h"
config EARLY_PRINTK config EARLY_PRINTK
......
arch/arm/boot/dts/exynos4.dtsi
View file @ cf2afdc5
This diff is collapsed.
arch/arm/boot/dts/exynos4210.dtsi
View file @ cf2afdc5
...@@ -53,7 +53,7 @@ mct@10050000 { ...@@ -53,7 +53,7 @@ mct@10050000 {
reg = <0x10050000 0x800>; reg = <0x10050000 0x800>;
interrupt-parent = <&mct_map>; interrupt-parent = <&mct_map>;
interrupts = <0>, <1>, <2>, <3>, <4>, <5>; interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
clocks = <&clock 3>, <&clock 344>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct"; clock-names = "fin_pll", "mct";
mct_map: mct-map { mct_map: mct-map {
...@@ -109,7 +109,7 @@ tmu@100C0000 { ...@@ -109,7 +109,7 @@ tmu@100C0000 {
interrupt-parent = <&combiner>; interrupt-parent = <&combiner>;
reg = <0x100C0000 0x100>; reg = <0x100C0000 0x100>;
interrupts = <2 4>; interrupts = <2 4>;
clocks = <&clock 383>; clocks = <&clock CLK_TMU_APBIF>;
clock-names = "tmu_apbif"; clock-names = "tmu_apbif";
status = "disabled"; status = "disabled";
}; };
...@@ -118,13 +118,14 @@ g2d@12800000 { ...@@ -118,13 +118,14 @@ g2d@12800000 {
compatible = "samsung,s5pv210-g2d"; compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>; reg = <0x12800000 0x1000>;
interrupts = <0 89 0>; interrupts = <0 89 0>;
clocks = <&clock 177>, <&clock 277>; clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d"; clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled"; status = "disabled";
}; };
camera { camera {
clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>; clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
<&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
fimc_0: fimc@11800000 { fimc_0: fimc@11800000 {
......
arch/arm/boot/dts/exynos4412-odroidx.dts
View file @ cf2afdc5
...@@ -251,7 +251,7 @@ buck1_reg: BUCK1 { ...@@ -251,7 +251,7 @@ buck1_reg: BUCK1 {
buck2_reg: BUCK2 { buck2_reg: BUCK2 {
regulator-name = "vdd_arm"; regulator-name = "vdd_arm";
regulator-min-microvolt = <900000>; regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1300000>; regulator-max-microvolt = <1350000>;
regulator-always-on; regulator-always-on;
regulator-boot-on; regulator-boot-on;
}; };
......
arch/arm/boot/dts/exynos4412-origen.dts
View file @ cf2afdc5
...@@ -459,8 +459,8 @@ buck1_reg: BUCK1 { ...@@ -459,8 +459,8 @@ buck1_reg: BUCK1 {
buck2_reg: BUCK2 { buck2_reg: BUCK2 {
regulator-name = "vdd_arm"; regulator-name = "vdd_arm";
regulator-min-microvolt = <925000>; regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1300000>; regulator-max-microvolt = <1350000>;
regulator-always-on; regulator-always-on;
regulator-boot-on; regulator-boot-on;
op_mode = <1>; /* Normal Mode */ op_mode = <1>; /* Normal Mode */
......
arch/arm/boot/dts/exynos4x12.dtsi
View file @ cf2afdc5
...@@ -47,7 +47,7 @@ mct@10050000 { ...@@ -47,7 +47,7 @@ mct@10050000 {
reg = <0x10050000 0x800>; reg = <0x10050000 0x800>;
interrupt-parent = <&mct_map>; interrupt-parent = <&mct_map>;
interrupts = <0>, <1>, <2>, <3>, <4>; interrupts = <0>, <1>, <2>, <3>, <4>;
clocks = <&clock 3>, <&clock 344>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct"; clock-names = "fin_pll", "mct";
mct_map: mct-map { mct_map: mct-map {
...@@ -97,13 +97,14 @@ g2d@10800000 { ...@@ -97,13 +97,14 @@ g2d@10800000 {
compatible = "samsung,exynos4212-g2d"; compatible = "samsung,exynos4212-g2d";
reg = <0x10800000 0x1000>; reg = <0x10800000 0x1000>;
interrupts = <0 89 0>; interrupts = <0 89 0>;
clocks = <&clock 177>, <&clock 277>; clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d"; clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled"; status = "disabled";
}; };
camera { camera {
clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>; clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
<&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
fimc_0: fimc@11800000 { fimc_0: fimc@11800000 {
...@@ -145,7 +146,7 @@ fimc_lite_0: fimc-lite@12390000 { ...@@ -145,7 +146,7 @@ fimc_lite_0: fimc-lite@12390000 {
reg = <0x12390000 0x1000>; reg = <0x12390000 0x1000>;
interrupts = <0 105 0>; interrupts = <0 105 0>;
samsung,power-domain = <&pd_isp>; samsung,power-domain = <&pd_isp>;
clocks = <&clock 353>; clocks = <&clock CLK_FIMC_LITE0>;
clock-names = "flite"; clock-names = "flite";
status = "disabled"; status = "disabled";
}; };
...@@ -155,7 +156,7 @@ fimc_lite_1: fimc-lite@123A0000 { ...@@ -155,7 +156,7 @@ fimc_lite_1: fimc-lite@123A0000 {
reg = <0x123A0000 0x1000>; reg = <0x123A0000 0x1000>;
interrupts = <0 106 0>; interrupts = <0 106 0>;
samsung,power-domain = <&pd_isp>; samsung,power-domain = <&pd_isp>;
clocks = <&clock 354>; clocks = <&clock CLK_FIMC_LITE1>;
clock-names = "flite"; clock-names = "flite";
status = "disabled"; status = "disabled";
}; };
...@@ -165,12 +166,19 @@ fimc_is: fimc-is@12000000 { ...@@ -165,12 +166,19 @@ fimc_is: fimc-is@12000000 {
reg = <0x12000000 0x260000>; reg = <0x12000000 0x260000>;
interrupts = <0 90 0>, <0 95 0>; interrupts = <0 90 0>, <0 95 0>;
samsung,power-domain = <&pd_isp>; samsung,power-domain = <&pd_isp>;
clocks = <&clock 353>, <&clock 354>, <&clock 355>, clocks = <&clock CLK_FIMC_LITE0>,
<&clock 356>, <&clock 17>, <&clock 357>, <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
<&clock 358>, <&clock 359>, <&clock 360>, <&clock CLK_PPMUISPMX>,
<&clock 450>,<&clock 451>, <&clock 452>, <&clock CLK_MOUT_MPLL_USER_T>,
<&clock 453>, <&clock 176>, <&clock 13>, <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
<&clock 454>, <&clock 395>, <&clock 455>; <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
<&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
<&clock CLK_DIV_MCUISP0>,
<&clock CLK_DIV_MCUISP1>,
<&clock CLK_SCLK_UART_ISP>,
<&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
<&clock CLK_ACLK400_MCUISP>,
<&clock CLK_DIV_ACLK400_MCUISP>;
clock-names = "lite0", "lite1", "ppmuispx", clock-names = "lite0", "lite1", "ppmuispx",
"ppmuispmx", "mpll", "isp", "ppmuispmx", "mpll", "isp",
"drc", "fd", "mcuisp", "drc", "fd", "mcuisp",
...@@ -190,7 +198,7 @@ pmu { ...@@ -190,7 +198,7 @@ pmu {
i2c1_isp: i2c-isp@12140000 { i2c1_isp: i2c-isp@12140000 {
compatible = "samsung,exynos4212-i2c-isp"; compatible = "samsung,exynos4212-i2c-isp";
reg = <0x12140000 0x100>; reg = <0x12140000 0x100>;
clocks = <&clock 370>; clocks = <&clock CLK_I2C1_ISP>;
clock-names = "i2c_isp"; clock-names = "i2c_isp";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
...@@ -205,7 +213,7 @@ mshc_0: mmc@12550000 { ...@@ -205,7 +213,7 @@ mshc_0: mmc@12550000 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
fifo-depth = <0x80>; fifo-depth = <0x80>;
clocks = <&clock 301>, <&clock 149>; clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
clock-names = "biu", "ciu"; clock-names = "biu", "ciu";
status = "disabled"; status = "disabled";
}; };
......
arch/arm/boot/dts/exynos5.dtsi
View file @ cf2afdc5
...@@ -81,13 +81,6 @@ rtc@101E0000 { ...@@ -81,13 +81,6 @@ rtc@101E0000 {
status = "disabled"; status = "disabled";
}; };
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x101D0000 0x100>;
interrupts = <0 42 0>;
status = "disabled";
};
fimd@14400000 { fimd@14400000 {
compatible = "samsung,exynos5250-fimd"; compatible = "samsung,exynos5250-fimd";
interrupt-parent = <&combiner>; interrupt-parent = <&combiner>;
......
arch/arm/boot/dts/exynos5250-arndale.dts
View file @ cf2afdc5
...@@ -25,6 +25,10 @@ chosen { ...@@ -25,6 +25,10 @@ chosen {
bootargs = "console=ttySAC2,115200"; bootargs = "console=ttySAC2,115200";
}; };
rtc@101E0000 {
status = "okay";
};
codec@11000000 { codec@11000000 {
samsung,mfc-r = <0x43000000 0x800000>; samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>; samsung,mfc-l = <0x51000000 0x800000>;
......
arch/arm/boot/dts/exynos5250-smdk5250.dts
View file @ cf2afdc5
...@@ -27,6 +27,10 @@ chosen { ...@@ -27,6 +27,10 @@ chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
}; };
rtc@101E0000 {
status = "okay";
};
i2c@12C60000 { i2c@12C60000 {
samsung,i2c-sda-delay = <100>; samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>; samsung,i2c-max-bus-freq = <20000>;
...@@ -36,6 +40,148 @@ eeprom@50 { ...@@ -36,6 +40,148 @@ eeprom@50 {
compatible = "samsung,s524ad0xd1"; compatible = "samsung,s524ad0xd1";
reg = <0x50>; reg = <0x50>;
}; };
max77686@09 {
compatible = "maxim,max77686";
reg = <0x09>;
voltage-regulators {
ldo1_reg: LDO1 {
regulator-name = "P1.0V_LDO_OUT1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo2_reg: LDO2 {
regulator-name = "P1.2V_LDO_OUT2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "P1.8V_LDO_OUT3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo4_reg: LDO4 {
regulator-name = "P2.8V_LDO_OUT4";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo5_reg: LDO5 {
regulator-name = "P1.8V_LDO_OUT5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo6_reg: LDO6 {
regulator-name = "P1.1V_LDO_OUT6";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "P1.1V_LDO_OUT7";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
ldo8_reg: LDO8 {
regulator-name = "P1.0V_LDO_OUT8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo10_reg: LDO10 {
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo11_reg: LDO11 {
regulator-name = "P1.8V_LDO_OUT11";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo12_reg: LDO12 {
regulator-name = "P3.0V_LDO_OUT12";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo13_reg: LDO13 {
regulator-name = "P1.8V_LDO_OUT13";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo14_reg: LDO14 {
regulator-name = "P1.8V_LDO_OUT14";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo15_reg: LDO15 {
regulator-name = "P1.0V_LDO_OUT15";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo16_reg: LDO16 {
regulator-name = "P1.8V_LDO_OUT16";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck5_reg: BUCK5 {
regulator-name = "P1.8V_BUCK_OUT5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
};
};
}; };
vdd: fixed-regulator@0 { vdd: fixed-regulator@0 {
......
arch/arm/boot/dts/exynos5250-snow.dts
View file @ cf2afdc5
...@@ -20,6 +20,10 @@ aliases { ...@@ -20,6 +20,10 @@ aliases {
i2c104 = &i2c_104; i2c104 = &i2c_104;
}; };
rtc@101E0000 {
status = "okay";
};
pinctrl@11400000 { pinctrl@11400000 {
sd3_clk: sd3-clk { sd3_clk: sd3-clk {
samsung,pin-drv = <0>; samsung,pin-drv = <0>;
......
arch/arm/boot/dts/exynos5250.dtsi
View file @ cf2afdc5
This diff is collapsed.
arch/arm/boot/dts/exynos5420-arndale-octa.dts
View file @ cf2afdc5
...@@ -11,6 +11,8 @@ ...@@ -11,6 +11,8 @@
/dts-v1/; /dts-v1/;
#include "exynos5420.dtsi" #include "exynos5420.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
/ { / {
model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
...@@ -31,6 +33,10 @@ oscclk { ...@@ -31,6 +33,10 @@ oscclk {
}; };
}; };
rtc@101E0000 {
status = "okay";
};
mmc@12200000 { mmc@12200000 {
status = "okay"; status = "okay";
broken-cd; broken-cd;
...@@ -41,6 +47,7 @@ mmc@12200000 { ...@@ -41,6 +47,7 @@ mmc@12200000 {
samsung,dw-mshc-ddr-timing = <0 2>; samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
vmmc-supply = <&ldo10_reg>;
slot@0 { slot@0 {
reg = <0>; reg = <0>;
...@@ -57,10 +64,301 @@ mmc@12220000 { ...@@ -57,10 +64,301 @@ mmc@12220000 {
samsung,dw-mshc-ddr-timing = <1 2>; samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
vmmc-supply = <&ldo10_reg>;
slot@0 { slot@0 {
reg = <0>; reg = <0>;
bus-width = <4>; bus-width = <4>;
}; };
}; };
hsi2c_4: i2c@12CA0000 {
status = "okay";
s2mps11_pmic@66 {
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
s2mps11,buck2-ramp-delay = <12>;
s2mps11,buck34-ramp-delay = <12>;
s2mps11,buck16-ramp-delay = <12>;
s2mps11,buck6-ramp-enable = <1>;
s2mps11,buck2-ramp-enable = <1>;
s2mps11,buck3-ramp-enable = <1>;
s2mps11,buck4-ramp-enable = <1>;
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
s2mps11_osc: clocks {
#clock-cells = <1>;
clock-output-names = "s2mps11_ap",
"s2mps11_cp", "s2mps11_bt";
};
regulators {
ldo1_reg: LDO1 {
regulator-name = "PVDD_ALIVE_1V0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo2_reg: LDO2 {
regulator-name = "PVDD_APIO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo3_reg: LDO3 {
regulator-name = "PVDD_APIO_MMCON_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo4_reg: LDO4 {
regulator-name = "PVDD_ADC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo5_reg: LDO5 {
regulator-name = "PVDD_PLL_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo6_reg: LDO6 {
regulator-name = "PVDD_ANAIP_1V0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo7_reg: LDO7 {
regulator-name = "PVDD_ANAIP_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo8_reg: LDO8 {
regulator-name = "PVDD_ABB_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo9_reg: LDO9 {
regulator-name = "PVDD_USB_3V3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo10_reg: LDO10 {
regulator-name = "PVDD_PRE_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo11_reg: LDO11 {
regulator-name = "PVDD_USB_1V0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo12_reg: LDO12 {
regulator-name = "PVDD_HSIC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo13_reg: LDO13 {
regulator-name = "PVDD_APIO_MMCOFF_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo15_reg: LDO15 {
regulator-name = "PVDD_PERI_2V8";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo16_reg: LDO16 {
regulator-name = "PVDD_PERI_3V3";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
};
ldo18_reg: LDO18 {
regulator-name = "PVDD_EMMC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo19_reg: LDO19 {
regulator-name = "PVDD_TFLASH_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo20_reg: LDO20 {
regulator-name = "PVDD_BTWIFI_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo21_reg: LDO21 {
regulator-name = "PVDD_CAM1IO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo23_reg: LDO23 {
regulator-name = "PVDD_MIFS_1V1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo24_reg: LDO24 {
regulator-name = "PVDD_CAM1_AVDD_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo26_reg: LDO26 {
regulator-name = "PVDD_CAM0_AF_2V8";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo27_reg: LDO27 {
regulator-name = "PVDD_G3DS_1V0";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo28_reg: LDO28 {
regulator-name = "PVDD_TSP_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo29_reg: LDO29 {
regulator-name = "PVDD_AUDIO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo31_reg: LDO31 {
regulator-name = "PVDD_PERI_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo32_reg: LDO32 {
regulator-name = "PVDD_LCD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo33_reg: LDO33 {
regulator-name = "PVDD_CAM0IO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo35_reg: LDO35 {
regulator-name = "PVDD_CAM0_DVDD_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo38_reg: LDO38 {
regulator-name = "PVDD_CAM0_AVDD_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
buck1_reg: BUCK1 {
regulator-name = "PVDD_MIF_1V1";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
buck3_reg: BUCK3 {
regulator-name = "PVDD_INT_1V0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
buck4_reg: BUCK4 {
regulator-name = "PVDD_G3D_1V0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
};
buck5_reg: BUCK5 {
regulator-name = "PVDD_LPDDR3_1V2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
buck6_reg: BUCK6 {
regulator-name = "PVDD_KFC_1V0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
buck7_reg: BUCK7 {
regulator-name = "VIN_LLDO_1V4";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
};
buck8_reg: BUCK8 {
regulator-name = "VIN_MLDO_2V0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
buck9_reg: BUCK9 {
regulator-name = "VIN_HLDO_3V5";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3500000>;
regulator-always-on;
};
buck10_reg: BUCK10 {
regulator-name = "PVDD_EMMCF_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
};
};
};
gpio_keys {
compatible = "gpio-keys";
wakeup {
label = "SW-TACT1";
gpios = <&gpx2 7 1>;
linux,code = <KEY_WAKEUP>;
gpio-key,wakeup;
};
};
}; };
arch/arm/boot/dts/exynos5420-smdk5420.dts
View file @ cf2afdc5
...@@ -31,6 +31,43 @@ oscclk { ...@@ -31,6 +31,43 @@ oscclk {
}; };
}; };
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vdd: fixed-regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "vdd-supply";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
dbvdd: fixed-regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "dbvdd-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
spkvdd: fixed-regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "spkvdd-supply";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
};
rtc@101E0000 {
status = "okay";
};
mmc@12200000 { mmc@12200000 {
status = "okay"; status = "okay";
broken-cd; broken-cd;
...@@ -120,4 +157,220 @@ hdmiddc@50 { ...@@ -120,4 +157,220 @@ hdmiddc@50 {
reg = <0x50>; reg = <0x50>;
}; };
}; };
hsi2c_4: i2c@12CA0000 {
status = "okay";
s2mps11_pmic@66 {
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
s2mps11,buck2-ramp-delay = <12>;
s2mps11,buck34-ramp-delay = <12>;
s2mps11,buck16-ramp-delay = <12>;
s2mps11,buck6-ramp-enable = <1>;
s2mps11,buck2-ramp-enable = <1>;
s2mps11,buck3-ramp-enable = <1>;
s2mps11,buck4-ramp-enable = <1>;
s2mps11_osc: clocks {
#clock-cells = <1>;
clock-output-names = "s2mps11_ap",
"s2mps11_cp", "s2mps11_bt";
};
regulators {
ldo1_reg: LDO1 {
regulator-name = "vdd_ldo1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "vdd_ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo5_reg: LDO5 {
regulator-name = "vdd_ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo6_reg: LDO6 {
regulator-name = "vdd_ldo6";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "vdd_ldo7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo8_reg: LDO8 {
regulator-name = "vdd_ldo8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo9_reg: LDO9 {
regulator-name = "vdd_ldo9";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
ldo10_reg: LDO10 {
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo11_reg: LDO11 {
regulator-name = "vdd_ldo11";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo12_reg: LDO12 {
regulator-name = "vdd_ldo12";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo13_reg: LDO13 {
regulator-name = "vdd_ldo13";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ldo15_reg: LDO15 {
regulator-name = "vdd_ldo15";
regulator-min-microvolt = <3100000>;
regulator-max-microvolt = <3100000>;
regulator-always-on;
};
ldo16_reg: LDO16 {
regulator-name = "vdd_ldo16";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
regulator-always-on;
};
ldo17_reg: LDO17 {
regulator-name = "tsp_avdd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo19_reg: LDO19 {
regulator-name = "vdd_sd";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ldo24_reg: LDO24 {
regulator-name = "tsp_io";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck5_reg: BUCK5 {
regulator-name = "vdd_mem";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck6_reg: BUCK6 {
regulator-name = "vdd_kfc";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck7_reg: BUCK7 {
regulator-name = "vdd_1.0v_ldo";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck8_reg: BUCK8 {
regulator-name = "vdd_1.8v_ldo";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck9_reg: BUCK9 {
regulator-name = "vdd_2.8v_ldo";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3750000>;
regulator-always-on;
regulator-boot-on;
};
buck10_reg: BUCK10 {
regulator-name = "vdd_vmem";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
}; };
arch/arm/boot/dts/exynos5420.dtsi
View file @ cf2afdc5
This diff is collapsed.
arch/arm/boot/dts/exynos5440.dtsi
View file @ cf2afdc5
...@@ -9,6 +9,7 @@ ...@@ -9,6 +9,7 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
#include <dt-bindings/clock/exynos5440.h>
#include "skeleton.dtsi" #include "skeleton.dtsi"
/ { / {
...@@ -105,7 +106,7 @@ serial@B0000 { ...@@ -105,7 +106,7 @@ serial@B0000 {
compatible = "samsung,exynos4210-uart"; compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>; reg = <0xB0000 0x1000>;
interrupts = <0 2 0>; interrupts = <0 2 0>;
clocks = <&clock 21>, <&clock 21>; clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0"; clock-names = "uart", "clk_uart_baud0";
}; };
...@@ -113,7 +114,7 @@ serial@C0000 { ...@@ -113,7 +114,7 @@ serial@C0000 {
compatible = "samsung,exynos4210-uart"; compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>; reg = <0xC0000 0x1000>;
interrupts = <0 3 0>; interrupts = <0 3 0>;
clocks = <&clock 21>, <&clock 21>; clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0"; clock-names = "uart", "clk_uart_baud0";
}; };
...@@ -125,7 +126,7 @@ spi_0: spi@D0000 { ...@@ -125,7 +126,7 @@ spi_0: spi@D0000 {
#size-cells = <0>; #size-cells = <0>;
samsung,spi-src-clk = <0>; samsung,spi-src-clk = <0>;
num-cs = <1>; num-cs = <1>;
clocks = <&clock 21>, <&clock 16>; clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
clock-names = "spi", "spi_busclk0"; clock-names = "spi", "spi_busclk0";
}; };
...@@ -161,7 +162,7 @@ i2c@F0000 { ...@@ -161,7 +162,7 @@ i2c@F0000 {
interrupts = <0 5 0>; interrupts = <0 5 0>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
clocks = <&clock 21>; clocks = <&clock CLK_B_125>;
clock-names = "i2c"; clock-names = "i2c";
}; };
...@@ -171,7 +172,7 @@ i2c@100000 { ...@@ -171,7 +172,7 @@ i2c@100000 {
interrupts = <0 6 0>; interrupts = <0 6 0>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
clocks = <&clock 21>; clocks = <&clock CLK_B_125>;
clock-names = "i2c"; clock-names = "i2c";
}; };
...@@ -179,7 +180,7 @@ watchdog { ...@@ -179,7 +180,7 @@ watchdog {
compatible = "samsung,s3c2410-wdt"; compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>; reg = <0x110000 0x1000>;
interrupts = <0 1 0>; interrupts = <0 1 0>;
clocks = <&clock 21>; clocks = <&clock CLK_B_125>;
clock-names = "watchdog"; clock-names = "watchdog";
}; };
...@@ -190,7 +191,7 @@ gmac: ethernet@00230000 { ...@@ -190,7 +191,7 @@ gmac: ethernet@00230000 {
interrupts = <0 31 4>; interrupts = <0 31 4>;
interrupt-names = "macirq"; interrupt-names = "macirq";
phy-mode = "sgmii"; phy-mode = "sgmii";
clocks = <&clock 25>; clocks = <&clock CLK_GMAC0>;
clock-names = "stmmaceth"; clock-names = "stmmaceth";
}; };
...@@ -206,7 +207,7 @@ rtc { ...@@ -206,7 +207,7 @@ rtc {
compatible = "samsung,s3c6410-rtc"; compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>; reg = <0x130000 0x1000>;
interrupts = <0 17 0>, <0 16 0>; interrupts = <0 17 0>, <0 16 0>;
clocks = <&clock 21>; clocks = <&clock CLK_B_125>;
clock-names = "rtc"; clock-names = "rtc";
}; };
...@@ -214,7 +215,7 @@ tmuctrl_0: tmuctrl@160118 { ...@@ -214,7 +215,7 @@ tmuctrl_0: tmuctrl@160118 {
compatible = "samsung,exynos5440-tmu"; compatible = "samsung,exynos5440-tmu";
reg = <0x160118 0x230>, <0x160368 0x10>; reg = <0x160118 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>; interrupts = <0 58 0>;
clocks = <&clock 21>; clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif"; clock-names = "tmu_apbif";
}; };
...@@ -222,7 +223,7 @@ tmuctrl_1: tmuctrl@16011C { ...@@ -222,7 +223,7 @@ tmuctrl_1: tmuctrl@16011C {
compatible = "samsung,exynos5440-tmu"; compatible = "samsung,exynos5440-tmu";
reg = <0x16011C 0x230>, <0x160368 0x10>; reg = <0x16011C 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>; interrupts = <0 58 0>;
clocks = <&clock 21>; clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif"; clock-names = "tmu_apbif";
}; };
...@@ -230,7 +231,7 @@ tmuctrl_2: tmuctrl@160120 { ...@@ -230,7 +231,7 @@ tmuctrl_2: tmuctrl@160120 {
compatible = "samsung,exynos5440-tmu"; compatible = "samsung,exynos5440-tmu";
reg = <0x160120 0x230>, <0x160368 0x10>; reg = <0x160120 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>; interrupts = <0 58 0>;
clocks = <&clock 21>; clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif"; clock-names = "tmu_apbif";
}; };
...@@ -238,7 +239,7 @@ sata@210000 { ...@@ -238,7 +239,7 @@ sata@210000 {
compatible = "snps,exynos5440-ahci"; compatible = "snps,exynos5440-ahci";
reg = <0x210000 0x10000>; reg = <0x210000 0x10000>;
interrupts = <0 30 0>; interrupts = <0 30 0>;
clocks = <&clock 23>; clocks = <&clock CLK_SATA>;
clock-names = "sata"; clock-names = "sata";
}; };
...@@ -246,7 +247,7 @@ ohci@220000 { ...@@ -246,7 +247,7 @@ ohci@220000 {
compatible = "samsung,exynos5440-ohci"; compatible = "samsung,exynos5440-ohci";
reg = <0x220000 0x1000>; reg = <0x220000 0x1000>;
interrupts = <0 29 0>; interrupts = <0 29 0>;
clocks = <&clock 24>; clocks = <&clock CLK_USB>;
clock-names = "usbhost"; clock-names = "usbhost";
}; };
...@@ -254,7 +255,7 @@ ehci@221000 { ...@@ -254,7 +255,7 @@ ehci@221000 {
compatible = "samsung,exynos5440-ehci"; compatible = "samsung,exynos5440-ehci";
reg = <0x221000 0x1000>; reg = <0x221000 0x1000>;
interrupts = <0 29 0>; interrupts = <0 29 0>;
clocks = <&clock 24>; clocks = <&clock CLK_USB>;
clock-names = "usbhost"; clock-names = "usbhost";
}; };
...@@ -264,7 +265,7 @@ pcie@290000 { ...@@ -264,7 +265,7 @@ pcie@290000 {
0x270000 0x1000 0x270000 0x1000
0x271000 0x40>; 0x271000 0x40>;
interrupts = <0 20 0>, <0 21 0>, <0 22 0>; interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
clocks = <&clock 28>, <&clock 27>; clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus"; clock-names = "pcie", "pcie_bus";
#address-cells = <3>; #address-cells = <3>;
#size-cells = <2>; #size-cells = <2>;
...@@ -285,7 +286,7 @@ pcie@2a0000 { ...@@ -285,7 +286,7 @@ pcie@2a0000 {
0x272000 0x1000 0x272000 0x1000
0x271040 0x40>; 0x271040 0x40>;
interrupts = <0 23 0>, <0 24 0>, <0 25 0>; interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
clocks = <&clock 29>, <&clock 27>; clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus"; clock-names = "pcie", "pcie_bus";
#address-cells = <3>; #address-cells = <3>;
#size-cells = <2>; #size-cells = <2>;
......
arch/arm/include/debug/samsung.S
View file @ cf2afdc5
...@@ -9,7 +9,7 @@ ...@@ -9,7 +9,7 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
#include <plat/regs-serial.h> #include <linux/serial_s3c.h>
/* The S5PV210/S5PC110 implementations are as belows. */ /* The S5PV210/S5PC110 implementations are as belows. */
......
arch/arm/mach-exynos/common.c
View file @ cf2afdc5
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <clocksource/samsung_pwm.h> #include <clocksource/samsung_pwm.h>
#include <linux/sched.h> #include <linux/sched.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/of.h> #include <linux/of.h>
#include <linux/of_fdt.h> #include <linux/of_fdt.h>
#include <linux/of_irq.h> #include <linux/of_irq.h>
...@@ -40,7 +41,6 @@ ...@@ -40,7 +41,6 @@
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/pm.h> #include <plat/pm.h>
#include <plat/regs-serial.h>
#include "common.h" #include "common.h"
#include "regs-pmu.h" #include "regs-pmu.h"
......
arch/arm/mach-exynos/include/mach/uncompress.h deleted 100644 → 0
View file @ 32adc19d
/*
* Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H __FILE__
#include <asm/mach-types.h>
#include <mach/map.h>
#include <plat/uncompress.h>
static unsigned int __raw_readl(unsigned int ptr)
{
return *((volatile unsigned int *)ptr);
}
static void arch_detect_cpu(void)
{
u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID);
/*
* product_id is bits 31:12
* bits 23:20 describe the exynosX family
* bits 27:24 describe the exynosX family in exynos5420
*/
chip_id >>= 20;
if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50)
uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
else
uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
/*
* For preventing FIFO overrun or infinite loop of UART console,
* fifo_max should be the minimum fifo size of all of the UART channels
*/
fifo_mask = S5PV210_UFSTAT_TXMASK;
fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
}
#endif /* __ASM_ARCH_UNCOMPRESS_H */
arch/arm/mach-exynos/pm.c
View file @ cf2afdc5
...@@ -35,56 +35,6 @@ ...@@ -35,56 +35,6 @@
#include "common.h" #include "common.h"
#include "regs-pmu.h" #include "regs-pmu.h"
#define EXYNOS4_EPLL_LOCK (S5P_VA_CMU + 0x0C010)
#define EXYNOS4_VPLL_LOCK (S5P_VA_CMU + 0x0C020)
#define EXYNOS4_EPLL_CON0 (S5P_VA_CMU + 0x0C110)
#define EXYNOS4_EPLL_CON1 (S5P_VA_CMU + 0x0C114)
#define EXYNOS4_VPLL_CON0 (S5P_VA_CMU + 0x0C120)
#define EXYNOS4_VPLL_CON1 (S5P_VA_CMU + 0x0C124)
#define EXYNOS4_CLKSRC_MASK_TOP (S5P_VA_CMU + 0x0C310)
#define EXYNOS4_CLKSRC_MASK_CAM (S5P_VA_CMU + 0x0C320)
#define EXYNOS4_CLKSRC_MASK_TV (S5P_VA_CMU + 0x0C324)
#define EXYNOS4_CLKSRC_MASK_LCD0 (S5P_VA_CMU + 0x0C334)
#define EXYNOS4_CLKSRC_MASK_MAUDIO (S5P_VA_CMU + 0x0C33C)
#define EXYNOS4_CLKSRC_MASK_FSYS (S5P_VA_CMU + 0x0C340)
#define EXYNOS4_CLKSRC_MASK_PERIL0 (S5P_VA_CMU + 0x0C350)
#define EXYNOS4_CLKSRC_MASK_PERIL1 (S5P_VA_CMU + 0x0C354)
#define EXYNOS4_CLKSRC_MASK_DMC (S5P_VA_CMU + 0x10300)
#define EXYNOS4_EPLLCON0_LOCKED_SHIFT (29)
#define EXYNOS4_VPLLCON0_LOCKED_SHIFT (29)
#define EXYNOS4210_CLKSRC_MASK_LCD1 (S5P_VA_CMU + 0x0C338)
static const struct sleep_save exynos4_set_clksrc[] = {
{ .reg = EXYNOS4_CLKSRC_MASK_TOP , .val = 0x00000001, },
{ .reg = EXYNOS4_CLKSRC_MASK_CAM , .val = 0x11111111, },
{ .reg = EXYNOS4_CLKSRC_MASK_TV , .val = 0x00000111, },
{ .reg = EXYNOS4_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
{ .reg = EXYNOS4_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
{ .reg = EXYNOS4_CLKSRC_MASK_FSYS , .val = 0x01011111, },
{ .reg = EXYNOS4_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
{ .reg = EXYNOS4_CLKSRC_MASK_PERIL1 , .val = 0x01110111, },
{ .reg = EXYNOS4_CLKSRC_MASK_DMC , .val = 0x00010000, },
};
static const struct sleep_save exynos4210_set_clksrc[] = {
{ .reg = EXYNOS4210_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
};
static struct sleep_save exynos4_epll_save[] = {
SAVE_ITEM(EXYNOS4_EPLL_CON0),
SAVE_ITEM(EXYNOS4_EPLL_CON1),
};
static struct sleep_save exynos4_vpll_save[] = {
SAVE_ITEM(EXYNOS4_VPLL_CON0),
SAVE_ITEM(EXYNOS4_VPLL_CON1),
};
static struct sleep_save exynos5_sys_save[] = { static struct sleep_save exynos5_sys_save[] = {
SAVE_ITEM(EXYNOS5_SYS_I2C_CFG), SAVE_ITEM(EXYNOS5_SYS_I2C_CFG),
}; };
...@@ -124,10 +74,7 @@ static void exynos_pm_prepare(void) ...@@ -124,10 +74,7 @@ static void exynos_pm_prepare(void)
s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save)); s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
if (!soc_is_exynos5250()) { if (soc_is_exynos5250()) {
s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
} else {
s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save)); s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save));
/* Disable USE_RETENTION of JPEG_MEM_OPTION */ /* Disable USE_RETENTION of JPEG_MEM_OPTION */
tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION); tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION);
...@@ -143,15 +90,6 @@ static void exynos_pm_prepare(void) ...@@ -143,15 +90,6 @@ static void exynos_pm_prepare(void)
/* ensure at least INFORM0 has the resume address */ /* ensure at least INFORM0 has the resume address */
__raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0); __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
/* Before enter central sequence mode, clock src register have to set */
if (!soc_is_exynos5250())
s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
if (soc_is_exynos4210())
s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
} }
static int exynos_pm_add(struct device *dev, struct subsys_interface *sif) static int exynos_pm_add(struct device *dev, struct subsys_interface *sif)
...@@ -162,73 +100,6 @@ static int exynos_pm_add(struct device *dev, struct subsys_interface *sif) ...@@ -162,73 +100,6 @@ static int exynos_pm_add(struct device *dev, struct subsys_interface *sif)
return 0; return 0;
} }
static unsigned long pll_base_rate;
static void exynos4_restore_pll(void)
{
unsigned long pll_con, locktime, lockcnt;
unsigned long pll_in_rate;
unsigned int p_div, epll_wait = 0, vpll_wait = 0;
if (pll_base_rate == 0)
return;
pll_in_rate = pll_base_rate;
/* EPLL */
pll_con = exynos4_epll_save[0].val;
if (pll_con & (1 << 31)) {
pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT);
p_div = (pll_con >> PLL46XX_PDIV_SHIFT);
pll_in_rate /= 1000000;
locktime = (3000 / pll_in_rate) * p_div;
lockcnt = locktime * 10000 / (10000 / pll_in_rate);
__raw_writel(lockcnt, EXYNOS4_EPLL_LOCK);
s3c_pm_do_restore_core(exynos4_epll_save,
ARRAY_SIZE(exynos4_epll_save));
epll_wait = 1;
}
pll_in_rate = pll_base_rate;
/* VPLL */
pll_con = exynos4_vpll_save[0].val;
if (pll_con & (1 << 31)) {
pll_in_rate /= 1000000;
/* 750us */
locktime = 750;
lockcnt = locktime * 10000 / (10000 / pll_in_rate);
__raw_writel(lockcnt, EXYNOS4_VPLL_LOCK);
s3c_pm_do_restore_core(exynos4_vpll_save,
ARRAY_SIZE(exynos4_vpll_save));
vpll_wait = 1;
}
/* Wait PLL locking */
do {
if (epll_wait) {
pll_con = __raw_readl(EXYNOS4_EPLL_CON0);
if (pll_con & (1 << EXYNOS4_EPLLCON0_LOCKED_SHIFT))
epll_wait = 0;
}
if (vpll_wait) {
pll_con = __raw_readl(EXYNOS4_VPLL_CON0);
if (pll_con & (1 << EXYNOS4_VPLLCON0_LOCKED_SHIFT))
vpll_wait = 0;
}
} while (epll_wait || vpll_wait);
}
static struct subsys_interface exynos_pm_interface = { static struct subsys_interface exynos_pm_interface = {
.name = "exynos_pm", .name = "exynos_pm",
.subsys = &exynos_subsys, .subsys = &exynos_subsys,
...@@ -237,7 +108,6 @@ static struct subsys_interface exynos_pm_interface = { ...@@ -237,7 +108,6 @@ static struct subsys_interface exynos_pm_interface = {
static __init int exynos_pm_drvinit(void) static __init int exynos_pm_drvinit(void)
{ {
struct clk *pll_base;
unsigned int tmp; unsigned int tmp;
if (soc_is_exynos5440()) if (soc_is_exynos5440())
...@@ -251,15 +121,6 @@ static __init int exynos_pm_drvinit(void) ...@@ -251,15 +121,6 @@ static __init int exynos_pm_drvinit(void)
tmp |= ((0xFF << 8) | (0x1F << 1)); tmp |= ((0xFF << 8) | (0x1F << 1));
__raw_writel(tmp, S5P_WAKEUP_MASK); __raw_writel(tmp, S5P_WAKEUP_MASK);
if (!soc_is_exynos5250()) {
pll_base = clk_get(NULL, "xtal");
if (!IS_ERR(pll_base)) {
pll_base_rate = clk_get_rate(pll_base);
clk_put(pll_base);
}
}
return subsys_interface_register(&exynos_pm_interface); return subsys_interface_register(&exynos_pm_interface);
} }
arch_initcall(exynos_pm_drvinit); arch_initcall(exynos_pm_drvinit);
...@@ -343,13 +204,8 @@ static void exynos_pm_resume(void) ...@@ -343,13 +204,8 @@ static void exynos_pm_resume(void)
s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
if (!soc_is_exynos5250()) { if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250())
exynos4_restore_pll();
#ifdef CONFIG_SMP
scu_enable(S5P_VA_SCU); scu_enable(S5P_VA_SCU);
#endif
}
early_wakeup: early_wakeup:
......
arch/arm/mach-exynos/pm_domains.c
View file @ cf2afdc5
...@@ -22,8 +22,6 @@ ...@@ -22,8 +22,6 @@
#include <linux/of_platform.h> #include <linux/of_platform.h>
#include <linux/sched.h> #include <linux/sched.h>
#include <plat/devs.h>
#include "regs-pmu.h" #include "regs-pmu.h"
/* /*
......
arch/arm/mach-s3c24xx/Kconfig
View file @ cf2afdc5
...@@ -521,7 +521,6 @@ config MACH_ANUBIS ...@@ -521,7 +521,6 @@ config MACH_ANUBIS
select HAVE_PATA_PLATFORM select HAVE_PATA_PLATFORM
select S3C2440_XTAL_12000000 select S3C2440_XTAL_12000000
select S3C24XX_DCLK select S3C24XX_DCLK
select S3C24XX_GPIO_EXTRA64
select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_USB_HOST select S3C_DEV_USB_HOST
help help
...@@ -562,7 +561,6 @@ config MACH_OSIRIS ...@@ -562,7 +561,6 @@ config MACH_OSIRIS
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_12000000 select S3C2440_XTAL_12000000
select S3C24XX_DCLK select S3C24XX_DCLK
select S3C24XX_GPIO_EXTRA128
select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_NAND select S3C_DEV_NAND
select S3C_DEV_USB_HOST select S3C_DEV_USB_HOST
......
arch/arm/mach-s3c24xx/clock-s3c2410.c
View file @ cf2afdc5
...@@ -30,13 +30,12 @@ ...@@ -30,13 +30,12 @@
#include <linux/mutex.h> #include <linux/mutex.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/io.h> #include <linux/io.h>
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <plat/regs-serial.h>
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
......
arch/arm/mach-s3c24xx/clock-s3c2412.c
View file @ cf2afdc5
...@@ -31,13 +31,12 @@ ...@@ -31,13 +31,12 @@
#include <linux/mutex.h> #include <linux/mutex.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/io.h> #include <linux/io.h>
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <plat/regs-serial.h>
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
......
arch/arm/mach-s3c24xx/clock-s3c2440.c
View file @ cf2afdc5
...@@ -34,6 +34,7 @@ ...@@ -34,6 +34,7 @@
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <linux/atomic.h> #include <linux/atomic.h>
...@@ -43,7 +44,6 @@ ...@@ -43,7 +44,6 @@
#include <plat/clock.h> #include <plat/clock.h>
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/regs-serial.h>
/* S3C2440 extended clock support */ /* S3C2440 extended clock support */
......
arch/arm/mach-s3c24xx/common.c
View file @ cf2afdc5
...@@ -27,6 +27,7 @@ ...@@ -27,6 +27,7 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/ioport.h> #include <linux/ioport.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <clocksource/samsung_pwm.h> #include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/delay.h> #include <linux/delay.h>
...@@ -44,7 +45,6 @@ ...@@ -44,7 +45,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
#include <mach/dma.h> #include <mach/dma.h>
#include <plat/cpu.h> #include <plat/cpu.h>
...@@ -240,7 +240,6 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) ...@@ -240,7 +240,6 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
} else { } else {
samsung_cpu_id = s3c24xx_read_idcode_v4(); samsung_cpu_id = s3c24xx_read_idcode_v4();
} }
s3c24xx_init_cpu();
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
......
arch/arm/mach-s3c24xx/dma-s3c2410.c
View file @ cf2afdc5
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <mach/map.h> #include <mach/map.h>
#include <mach/dma.h> #include <mach/dma.h>
...@@ -23,7 +24,6 @@ ...@@ -23,7 +24,6 @@
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/dma-s3c24xx.h> #include <plat/dma-s3c24xx.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <plat/regs-dma.h> #include <plat/regs-dma.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
......
arch/arm/mach-s3c24xx/dma-s3c2412.c
View file @ cf2afdc5
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/io.h> #include <linux/io.h>
#include <mach/dma.h> #include <mach/dma.h>
...@@ -23,7 +24,6 @@ ...@@ -23,7 +24,6 @@
#include <plat/dma-s3c24xx.h> #include <plat/dma-s3c24xx.h>
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <plat/regs-dma.h> #include <plat/regs-dma.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
......
arch/arm/mach-s3c24xx/dma-s3c2440.c
View file @ cf2afdc5
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <mach/map.h> #include <mach/map.h>
#include <mach/dma.h> #include <mach/dma.h>
...@@ -23,7 +24,6 @@ ...@@ -23,7 +24,6 @@
#include <plat/dma-s3c24xx.h> #include <plat/dma-s3c24xx.h>
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <plat/regs-dma.h> #include <plat/regs-dma.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
......
arch/arm/mach-s3c24xx/dma-s3c2443.c
View file @ cf2afdc5
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/io.h> #include <linux/io.h>
#include <mach/dma.h> #include <mach/dma.h>
...@@ -23,7 +24,6 @@ ...@@ -23,7 +24,6 @@
#include <plat/dma-s3c24xx.h> #include <plat/dma-s3c24xx.h>
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <plat/regs-dma.h> #include <plat/regs-dma.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
......
arch/arm/mach-s3c24xx/include/mach/debug-macro.S
View file @ cf2afdc5
...@@ -14,7 +14,7 @@ ...@@ -14,7 +14,7 @@
#include <mach/map.h> #include <mach/map.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <plat/regs-serial.h> #include <linux/serial_s3c.h>
#define S3C2410_UART1_OFF (0x4000) #define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9) #define SHIFT_2440TXF (14-9)
......
arch/arm/plat-samsung/include/plat/rtc-core.h → arch/arm/mach-s3c24xx/include/mach/rtc-core.h
View file @ cf2afdc5
/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h /*
*
* Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
* *
* Samsung RTC Controller core functions * Samsung RTC Controller core functions
...@@ -9,19 +8,19 @@ ...@@ -9,19 +8,19 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
#ifndef __ASM_PLAT_RTC_CORE_H #ifndef __RTC_CORE_H
#define __ASM_PLAT_RTC_CORE_H __FILE__ #define __RTC_CORE_H __FILE__
/* These functions are only for use with the core support code, such as /* These functions are only for use with the core support code, such as
* the cpu specific initialisation code * the cpu specific initialisation code
*/ */
extern struct platform_device s3c_device_rtc;
/* re-define device name depending on support. */ /* re-define device name depending on support. */
static inline void s3c_rtc_setname(char *name) static inline void s3c_rtc_setname(char *name)
{ {
#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
s3c_device_rtc.name = name; s3c_device_rtc.name = name;
#endif
} }
#endif /* __ASM_PLAT_RTC_CORE_H */ #endif /* __RTC_CORE_H */
arch/arm/mach-s3c24xx/include/mach/tick.h deleted 100644 → 0
View file @ 32adc19d
/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C2410 - timer tick support
*/
#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
static inline int s3c24xx_ostimer_pending(void)
{
return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
}
arch/arm/mach-s3c24xx/mach-amlm5900.c
View file @ cf2afdc5
...@@ -37,6 +37,7 @@ ...@@ -37,6 +37,7 @@
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/proc_fs.h> #include <linux/proc_fs.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/io.h> #include <linux/io.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
...@@ -49,7 +50,6 @@ ...@@ -49,7 +50,6 @@
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <mach/fb.h> #include <mach/fb.h>
#include <plat/regs-serial.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h> #include <mach/gpio-samsung.h>
......
arch/arm/mach-s3c24xx/mach-anubis.c
View file @ cf2afdc5
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/ata_platform.h> #include <linux/ata_platform.h>
#include <linux/i2c.h> #include <linux/i2c.h>
...@@ -32,7 +33,6 @@ ...@@ -32,7 +33,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h> #include <mach/gpio-samsung.h>
......
arch/arm/mach-s3c24xx/mach-at2440evb.c
View file @ cf2afdc5
...@@ -21,6 +21,7 @@ ...@@ -21,6 +21,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/dm9000.h> #include <linux/dm9000.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
...@@ -33,7 +34,6 @@ ...@@ -33,7 +34,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h> #include <mach/gpio-samsung.h>
......
arch/arm/mach-s3c24xx/mach-bast.c
View file @ cf2afdc5
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/syscore_ops.h> #include <linux/syscore_ops.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/dm9000.h> #include <linux/dm9000.h>
#include <linux/ata_platform.h> #include <linux/ata_platform.h>
...@@ -55,7 +56,6 @@ ...@@ -55,7 +56,6 @@
#include <plat/cpu-freq.h> #include <plat/cpu-freq.h>
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h> #include <plat/samsung-time.h>
#include "bast.h" #include "bast.h"
......
arch/arm/mach-s3c24xx/mach-gta02.c
View file @ cf2afdc5
...@@ -35,6 +35,7 @@ ...@@ -35,6 +35,7 @@
#include <linux/workqueue.h> #include <linux/workqueue.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/input.h> #include <linux/input.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/i2c.h> #include <linux/i2c.h>
...@@ -81,7 +82,6 @@ ...@@ -81,7 +82,6 @@
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
#include <plat/pm.h> #include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h> #include <plat/samsung-time.h>
#include "common.h" #include "common.h"
......
arch/arm/mach-s3c24xx/mach-h1940.c
View file @ cf2afdc5
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/gpio.h> #include <linux/gpio.h>
...@@ -62,7 +63,6 @@ ...@@ -62,7 +63,6 @@
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
#include <plat/pll.h> #include <plat/pll.h>
#include <plat/pm.h> #include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h> #include <plat/samsung-time.h>
#include "common.h" #include "common.h"
......
arch/arm/mach-s3c24xx/mach-jive.c
View file @ cf2afdc5
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/syscore_ops.h> #include <linux/syscore_ops.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/i2c.h> #include <linux/i2c.h>
...@@ -31,7 +32,6 @@ ...@@ -31,7 +32,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <plat/regs-serial.h>
#include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h>
......
arch/arm/mach-s3c24xx/mach-mini2440.c
View file @ cf2afdc5
...@@ -23,6 +23,7 @@ ...@@ -23,6 +23,7 @@
#include <linux/input.h> #include <linux/input.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/dm9000.h> #include <linux/dm9000.h>
#include <linux/platform_data/at24.h> #include <linux/platform_data/at24.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
...@@ -37,7 +38,6 @@ ...@@ -37,7 +38,6 @@
#include <mach/fb.h> #include <mach/fb.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <linux/platform_data/leds-s3c24xx.h> #include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
......
arch/arm/mach-s3c24xx/mach-n30.c
View file @ cf2afdc5
...@@ -24,6 +24,7 @@ ...@@ -24,6 +24,7 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/mmc/host.h> #include <linux/mmc/host.h>
...@@ -43,7 +44,6 @@ ...@@ -43,7 +44,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h>
#include <plat/regs-serial.h>
#include <plat/clock.h> #include <plat/clock.h>
#include <plat/cpu.h> #include <plat/cpu.h>
......
arch/arm/mach-s3c24xx/mach-nexcoder.c
View file @ cf2afdc5
...@@ -21,6 +21,7 @@ ...@@ -21,6 +21,7 @@
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/string.h> #include <linux/string.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -38,7 +39,6 @@ ...@@ -38,7 +39,6 @@
//#include <asm/debug-ll.h> //#include <asm/debug-ll.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h> #include <mach/gpio-samsung.h>
#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
......
arch/arm/mach-s3c24xx/mach-osiris.c
View file @ cf2afdc5
...@@ -18,6 +18,7 @@ ...@@ -18,6 +18,7 @@
#include <linux/device.h> #include <linux/device.h>
#include <linux/syscore_ops.h> #include <linux/syscore_ops.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -44,7 +45,6 @@ ...@@ -44,7 +45,6 @@
#include <plat/cpu-freq.h> #include <plat/cpu-freq.h>
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h> #include <plat/samsung-time.h>
#include <mach/hardware.h> #include <mach/hardware.h>
......
arch/arm/mach-s3c24xx/mach-otom.c
View file @ cf2afdc5
...@@ -15,6 +15,7 @@ ...@@ -15,6 +15,7 @@
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -32,7 +33,6 @@ ...@@ -32,7 +33,6 @@
#include <plat/clock.h> #include <plat/clock.h>
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h> #include <plat/samsung-time.h>
#include "common.h" #include "common.h"
......
arch/arm/mach-s3c24xx/mach-qt2410.c
View file @ cf2afdc5
...@@ -31,6 +31,7 @@ ...@@ -31,6 +31,7 @@
#include <linux/device.h> #include <linux/device.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h> #include <linux/spi/spi_gpio.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -49,7 +50,6 @@ ...@@ -49,7 +50,6 @@
#include <linux/platform_data/leds-s3c24xx.h> #include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
#include <plat/regs-serial.h>
#include <mach/fb.h> #include <mach/fb.h>
#include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/usb-s3c2410_udc.h>
......
arch/arm/mach-s3c24xx/mach-rx1950.c
View file @ cf2afdc5
...@@ -21,6 +21,7 @@ ...@@ -21,6 +21,7 @@
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/input.h> #include <linux/input.h>
#include <linux/gpio_keys.h> #include <linux/gpio_keys.h>
#include <linux/device.h> #include <linux/device.h>
...@@ -57,7 +58,6 @@ ...@@ -57,7 +58,6 @@
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/pm.h> #include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h> #include <plat/samsung-time.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
......
arch/arm/mach-s3c24xx/mach-rx3715.c
View file @ cf2afdc5
...@@ -23,6 +23,7 @@ ...@@ -23,6 +23,7 @@
#include <linux/device.h> #include <linux/device.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/serial.h> #include <linux/serial.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/mtd/mtd.h> #include <linux/mtd/mtd.h>
...@@ -49,7 +50,6 @@ ...@@ -49,7 +50,6 @@
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/pm.h> #include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h> #include <plat/samsung-time.h>
#include "common.h" #include "common.h"
......
arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
View file @ cf2afdc5
...@@ -19,13 +19,13 @@ ...@@ -19,13 +19,13 @@
#include <linux/irqchip.h> #include <linux/irqchip.h>
#include <linux/of_platform.h> #include <linux/of_platform.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <mach/map.h> #include <mach/map.h>
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/pm.h> #include <plat/pm.h>
#include <plat/regs-serial.h>
#include "common.h" #include "common.h"
......
arch/arm/mach-s3c24xx/mach-smdk2410.c
View file @ cf2afdc5
...@@ -35,6 +35,7 @@ ...@@ -35,6 +35,7 @@
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -46,7 +47,6 @@ ...@@ -46,7 +47,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h> #include <plat/devs.h>
......
arch/arm/mach-s3c24xx/mach-smdk2413.c
View file @ cf2afdc5
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -33,7 +34,6 @@ ...@@ -33,7 +34,6 @@
#include <asm/mach-types.h> #include <asm/mach-types.h>
//#include <asm/debug-ll.h> //#include <asm/debug-ll.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
......
arch/arm/mach-s3c24xx/mach-smdk2416.c
View file @ cf2afdc5
...@@ -18,6 +18,7 @@ ...@@ -18,6 +18,7 @@
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
...@@ -34,7 +35,6 @@ ...@@ -34,7 +35,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
#include <mach/regs-s3c2443-clock.h> #include <mach/regs-s3c2443-clock.h>
......
arch/arm/mach-s3c24xx/mach-smdk2440.c
View file @ cf2afdc5
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -31,7 +32,6 @@ ...@@ -31,7 +32,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
......
arch/arm/mach-s3c24xx/mach-smdk2443.c
View file @ cf2afdc5
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -31,7 +32,6 @@ ...@@ -31,7 +32,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
......
arch/arm/mach-s3c24xx/mach-tct_hammer.c
View file @ cf2afdc5
...@@ -33,6 +33,7 @@ ...@@ -33,6 +33,7 @@
#include <linux/device.h> #include <linux/device.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/io.h> #include <linux/io.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
...@@ -44,7 +45,6 @@ ...@@ -44,7 +45,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/cpu.h> #include <plat/cpu.h>
......
arch/arm/mach-s3c24xx/mach-vr1000.c
View file @ cf2afdc5
...@@ -25,6 +25,7 @@ ...@@ -25,6 +25,7 @@
#include <linux/tty.h> #include <linux/tty.h>
#include <linux/serial_8250.h> #include <linux/serial_8250.h>
#include <linux/serial_reg.h> #include <linux/serial_reg.h>
#include <linux/serial_s3c.h>
#include <linux/io.h> #include <linux/io.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
...@@ -45,7 +46,6 @@ ...@@ -45,7 +46,6 @@
#include <plat/clock.h> #include <plat/clock.h>
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/regs-serial.h>
#include <plat/samsung-time.h> #include <plat/samsung-time.h>
#include "bast.h" #include "bast.h"
......
arch/arm/mach-s3c24xx/mach-vstms.c
View file @ cf2afdc5
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/mtd/mtd.h> #include <linux/mtd/mtd.h>
...@@ -32,7 +33,6 @@ ...@@ -32,7 +33,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
......
arch/arm/mach-s3c24xx/pm.c
View file @ cf2afdc5
...@@ -33,9 +33,9 @@ ...@@ -33,9 +33,9 @@
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/io.h> #include <linux/io.h>
#include <plat/regs-serial.h>
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/regs-irq.h> #include <mach/regs-irq.h>
......
arch/arm/mach-s3c24xx/s3c2410.c
View file @ cf2afdc5
...@@ -21,6 +21,7 @@ ...@@ -21,6 +21,7 @@
#include <linux/device.h> #include <linux/device.h>
#include <linux/syscore_ops.h> #include <linux/syscore_ops.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/reboot.h> #include <linux/reboot.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -37,7 +38,6 @@ ...@@ -37,7 +38,6 @@
#include <plat/cpu-freq.h> #include <plat/cpu-freq.h>
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/devs.h> #include <plat/devs.h>
......
arch/arm/mach-s3c24xx/s3c2412.c
View file @ cf2afdc5
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/device.h> #include <linux/device.h>
#include <linux/syscore_ops.h> #include <linux/syscore_ops.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/reboot.h> #include <linux/reboot.h>
...@@ -43,7 +44,6 @@ ...@@ -43,7 +44,6 @@
#include <plat/nand-core.h> #include <plat/nand-core.h>
#include <plat/pll.h> #include <plat/pll.h>
#include <plat/pm.h> #include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h> #include <plat/regs-spi.h>
#include "common.h" #include "common.h"
......
arch/arm/mach-s3c24xx/s3c2416.c
View file @ cf2afdc5
...@@ -48,6 +48,7 @@ ...@@ -48,6 +48,7 @@
#include <asm/system_misc.h> #include <asm/system_misc.h>
#include <mach/regs-s3c2443-clock.h> #include <mach/regs-s3c2443-clock.h>
#include <mach/rtc-core.h>
#include <plat/gpio-core.h> #include <plat/gpio-core.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
...@@ -61,7 +62,6 @@ ...@@ -61,7 +62,6 @@
#include <plat/fb-core.h> #include <plat/fb-core.h>
#include <plat/nand-core.h> #include <plat/nand-core.h>
#include <plat/adc-core.h> #include <plat/adc-core.h>
#include <plat/rtc-core.h>
#include <plat/spi-core.h> #include <plat/spi-core.h>
#include "common.h" #include "common.h"
......
arch/arm/mach-s3c24xx/s3c2443.c
View file @ cf2afdc5
...@@ -34,6 +34,7 @@ ...@@ -34,6 +34,7 @@
#include <asm/system_misc.h> #include <asm/system_misc.h>
#include <mach/regs-s3c2443-clock.h> #include <mach/regs-s3c2443-clock.h>
#include <mach/rtc-core.h>
#include <plat/gpio-core.h> #include <plat/gpio-core.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
...@@ -43,7 +44,6 @@ ...@@ -43,7 +44,6 @@
#include <plat/fb-core.h> #include <plat/fb-core.h>
#include <plat/nand-core.h> #include <plat/nand-core.h>
#include <plat/adc-core.h> #include <plat/adc-core.h>
#include <plat/rtc-core.h>
#include <plat/spi-core.h> #include <plat/spi-core.h>
static struct map_desc s3c2443_iodesc[] __initdata = { static struct map_desc s3c2443_iodesc[] __initdata = {
......
arch/arm/mach-s3c24xx/s3c244x.c
View file @ cf2afdc5
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/reboot.h> #include <linux/reboot.h>
#include <linux/device.h> #include <linux/device.h>
...@@ -35,7 +36,6 @@ ...@@ -35,7 +36,6 @@
#include <plat/cpu-freq.h> #include <plat/cpu-freq.h>
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <plat/clock.h> #include <plat/clock.h>
......
arch/arm/mach-s3c24xx/sleep-s3c2410.S
View file @ cf2afdc5
...@@ -25,13 +25,13 @@ ...@@ -25,13 +25,13 @@
*/ */
#include <linux/linkage.h> #include <linux/linkage.h>
#include <linux/serial_s3c.h>
#include <asm/assembler.h> #include <asm/assembler.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/map.h> #include <mach/map.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include "regs-mem.h" #include "regs-mem.h"
......
arch/arm/mach-s3c24xx/sleep.S
View file @ cf2afdc5
...@@ -25,13 +25,13 @@ ...@@ -25,13 +25,13 @@
*/ */
#include <linux/linkage.h> #include <linux/linkage.h>
#include <linux/serial_s3c.h>
#include <asm/assembler.h> #include <asm/assembler.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/map.h> #include <mach/map.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <plat/regs-serial.h>
/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
* reset the UART configuration, only enable if you really need this! * reset the UART configuration, only enable if you really need this!
......
arch/arm/mach-s3c64xx/common.c
View file @ cf2afdc5
...@@ -25,6 +25,7 @@ ...@@ -25,6 +25,7 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/ioport.h> #include <linux/ioport.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/reboot.h> #include <linux/reboot.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -50,7 +51,6 @@ ...@@ -50,7 +51,6 @@
#include <plat/irq-uart.h> #include <plat/irq-uart.h>
#include <plat/pwm-core.h> #include <plat/pwm-core.h>
#include <plat/regs-irqtype.h> #include <plat/regs-irqtype.h>
#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h> #include <plat/watchdog-reset.h>
#include "common.h" #include "common.h"
......
arch/arm/mach-s3c64xx/include/mach/debug-macro.S
View file @ cf2afdc5
...@@ -12,8 +12,8 @@ ...@@ -12,8 +12,8 @@
/* pull in the relevant register and map files. */ /* pull in the relevant register and map files. */
#include <linux/serial_s3c.h>
#include <mach/map.h> #include <mach/map.h>
#include <plat/regs-serial.h>
/* note, for the boot process to work we have to keep the UART /* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1 * virtual address aligned to an 1MiB boundary for the L1
......
arch/arm/mach-s3c64xx/include/mach/tick.h deleted 100644 → 0
View file @ 32adc19d
/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C64XX - Timer tick support definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_TICK_H
#define __ASM_ARCH_TICK_H __FILE__
#include <linux/irqchip/arm-vic.h>
/* note, the timer interrutps turn up in 2 places, the vic and then
* the timer block. We take the VIC as the base at the moment.
*/
static inline u32 s3c24xx_ostimer_pending(void)
{
u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
}
#define TICK_MAX (0xffffffff)
#endif /* __ASM_ARCH_6400_TICK_H */
arch/arm/mach-s3c64xx/irq-pm.c
View file @ cf2afdc5
...@@ -20,13 +20,13 @@ ...@@ -20,13 +20,13 @@
#include <linux/syscore_ops.h> #include <linux/syscore_ops.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/of.h> #include <linux/of.h>
#include <mach/map.h> #include <mach/map.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/pm.h> #include <plat/pm.h>
......
arch/arm/mach-s3c64xx/mach-anw6410.c
View file @ cf2afdc5
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/i2c.h> #include <linux/i2c.h>
...@@ -41,7 +42,6 @@ ...@@ -41,7 +42,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h> #include <plat/fb.h>
......
arch/arm/mach-s3c64xx/mach-crag6410.c
View file @ cf2afdc5
...@@ -14,6 +14,7 @@ ...@@ -14,6 +14,7 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/list.h> #include <linux/list.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/fb.h> #include <linux/fb.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -51,7 +52,6 @@ ...@@ -51,7 +52,6 @@
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h> #include <mach/gpio-samsung.h>
#include <plat/regs-serial.h>
#include <plat/fb.h> #include <plat/fb.h>
#include <plat/sdhci.h> #include <plat/sdhci.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
......
arch/arm/mach-s3c64xx/mach-hmt.c
View file @ cf2afdc5
...@@ -11,6 +11,7 @@ ...@@ -11,6 +11,7 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/i2c.h> #include <linux/i2c.h>
...@@ -33,7 +34,6 @@ ...@@ -33,7 +34,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h>
#include <mach/gpio-samsung.h> #include <mach/gpio-samsung.h>
#include <plat/fb.h> #include <plat/fb.h>
......
arch/arm/mach-s3c64xx/mach-mini6410.c
View file @ cf2afdc5
...@@ -22,6 +22,7 @@ ...@@ -22,6 +22,7 @@
#include <linux/mtd/mtd.h> #include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/types.h> #include <linux/types.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
...@@ -38,7 +39,6 @@ ...@@ -38,7 +39,6 @@
#include <plat/fb.h> #include <plat/fb.h>
#include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/mmc-sdhci-s3c.h> #include <linux/platform_data/mmc-sdhci-s3c.h>
#include <plat/regs-serial.h>
#include <plat/sdhci.h> #include <plat/sdhci.h>
#include <linux/platform_data/touchscreen-s3c2410.h> #include <linux/platform_data/touchscreen-s3c2410.h>
......
arch/arm/mach-s3c64xx/mach-ncp.c
View file @ cf2afdc5
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/i2c.h> #include <linux/i2c.h>
...@@ -36,7 +37,6 @@ ...@@ -36,7 +37,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h> #include <plat/fb.h>
......
arch/arm/mach-s3c64xx/mach-real6410.c
View file @ cf2afdc5
...@@ -23,6 +23,7 @@ ...@@ -23,6 +23,7 @@
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/types.h> #include <linux/types.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
...@@ -38,7 +39,6 @@ ...@@ -38,7 +39,6 @@
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/fb.h> #include <plat/fb.h>
#include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/regs-serial.h>
#include <linux/platform_data/touchscreen-s3c2410.h> #include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h> #include <video/platform_lcd.h>
......
arch/arm/mach-s3c64xx/mach-smartq.c
View file @ cf2afdc5
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/pwm_backlight.h> #include <linux/pwm_backlight.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/spi/spi_gpio.h> #include <linux/spi/spi_gpio.h>
#include <linux/usb/gpio_vbus.h> #include <linux/usb/gpio_vbus.h>
#include <linux/platform_data/s3c-hsotg.h> #include <linux/platform_data/s3c-hsotg.h>
...@@ -33,7 +34,6 @@ ...@@ -33,7 +34,6 @@
#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
#include <linux/platform_data/hwmon-s3c.h> #include <linux/platform_data/hwmon-s3c.h>
#include <plat/regs-serial.h>
#include <linux/platform_data/usb-ohci-s3c2410.h> #include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/sdhci.h> #include <plat/sdhci.h>
#include <linux/platform_data/touchscreen-s3c2410.h> #include <linux/platform_data/touchscreen-s3c2410.h>
......
arch/arm/mach-s3c64xx/mach-smdk6400.c
View file @ cf2afdc5
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -29,8 +30,6 @@ ...@@ -29,8 +30,6 @@
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/map.h> #include <mach/map.h>
#include <plat/regs-serial.h>
#include <plat/clock.h> #include <plat/clock.h>
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/cpu.h> #include <plat/cpu.h>
......
arch/arm/mach-s3c64xx/mach-smdk6410.c
View file @ cf2afdc5
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/input.h> #include <linux/input.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/i2c.h> #include <linux/i2c.h>
...@@ -55,7 +56,6 @@ ...@@ -55,7 +56,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h> #include <mach/gpio-samsung.h>
#include <linux/platform_data/ata-samsung_cf.h> #include <linux/platform_data/ata-samsung_cf.h>
......
arch/arm/mach-s3c64xx/s3c6400.c
View file @ cf2afdc5
...@@ -23,6 +23,7 @@ ...@@ -23,6 +23,7 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/of.h> #include <linux/of.h>
...@@ -34,7 +35,6 @@ ...@@ -34,7 +35,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <plat/cpu-freq.h> #include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <plat/cpu.h> #include <plat/cpu.h>
......
arch/arm/mach-s3c64xx/s3c6410.c
View file @ cf2afdc5
...@@ -24,6 +24,7 @@ ...@@ -24,6 +24,7 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/of.h> #include <linux/of.h>
...@@ -35,7 +36,6 @@ ...@@ -35,7 +36,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <plat/cpu-freq.h> #include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <plat/cpu.h> #include <plat/cpu.h>
......
arch/arm/mach-s5p64x0/common.c
View file @ cf2afdc5
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <clocksource/samsung_pwm.h> #include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/sched.h> #include <linux/sched.h>
...@@ -50,7 +51,6 @@ ...@@ -50,7 +51,6 @@
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
#include <plat/pwm-core.h> #include <plat/pwm-core.h>
#include <plat/regs-irqtype.h> #include <plat/regs-irqtype.h>
#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h> #include <plat/watchdog-reset.h>
#include "common.h" #include "common.h"
......
arch/arm/mach-s5p64x0/include/mach/debug-macro.S
View file @ cf2afdc5
...@@ -10,11 +10,10 @@ ...@@ -10,11 +10,10 @@
/* pull in the relevant register and map files. */ /* pull in the relevant register and map files. */
#include <linux/serial_s3c.h>
#include <plat/map-base.h> #include <plat/map-base.h>
#include <plat/map-s5p.h> #include <plat/map-s5p.h>
#include <plat/regs-serial.h>
.macro addruart, rp, rv, tmp .macro addruart, rp, rv, tmp
mov \rp, #0xE0000000 mov \rp, #0xE0000000
orr \rp, \rp, #0x00100000 orr \rp, \rp, #0x00100000
......
arch/arm/mach-s5p64x0/irq-pm.c
View file @ cf2afdc5
...@@ -14,9 +14,9 @@ ...@@ -14,9 +14,9 @@
#include <linux/syscore_ops.h> #include <linux/syscore_ops.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/io.h> #include <linux/io.h>
#include <plat/regs-serial.h>
#include <plat/pm.h> #include <plat/pm.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
......
arch/arm/mach-s5p64x0/mach-smdk6440.c
View file @ cf2afdc5
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/module.h> #include <linux/module.h>
...@@ -39,7 +40,6 @@ ...@@ -39,7 +40,6 @@
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
#include <plat/clock.h> #include <plat/clock.h>
#include <plat/devs.h> #include <plat/devs.h>
......
arch/arm/mach-s5p64x0/mach-smdk6450.c
View file @ cf2afdc5
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/module.h> #include <linux/module.h>
...@@ -39,7 +40,6 @@ ...@@ -39,7 +40,6 @@
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
#include <plat/clock.h> #include <plat/clock.h>
#include <plat/devs.h> #include <plat/devs.h>
......
arch/arm/mach-s5pc100/common.c
View file @ cf2afdc5
...@@ -22,6 +22,7 @@ ...@@ -22,6 +22,7 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <clocksource/samsung_pwm.h> #include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/sched.h> #include <linux/sched.h>
...@@ -49,7 +50,6 @@ ...@@ -49,7 +50,6 @@
#include <plat/onenand-core.h> #include <plat/onenand-core.h>
#include <plat/pwm-core.h> #include <plat/pwm-core.h>
#include <plat/spi-core.h> #include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h> #include <plat/watchdog-reset.h>
#include "common.h" #include "common.h"
......
arch/arm/mach-s5pc100/include/mach/debug-macro.S
View file @ cf2afdc5
...@@ -13,8 +13,8 @@ ...@@ -13,8 +13,8 @@
/* pull in the relevant register and map files. */ /* pull in the relevant register and map files. */
#include <linux/serial_s3c.h>
#include <mach/map.h> #include <mach/map.h>
#include <plat/regs-serial.h>
/* note, for the boot process to work we have to keep the UART /* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1 * virtual address aligned to an 1MiB boundary for the L1
......
arch/arm/mach-s5pc100/include/mach/tick.h deleted 100644 → 0
View file @ 32adc19d
/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S3C64XX - Timer tick support definitions
*
* Based on mach-s3c6400/include/mach/tick.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_TICK_H
#define __ASM_ARCH_TICK_H __FILE__
#include <linux/irqchip/arm-vic.h>
/* note, the timer interrutps turn up in 2 places, the vic and then
* the timer block. We take the VIC as the base at the moment.
*/
static inline u32 s3c24xx_ostimer_pending(void)
{
u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
}
#define TICK_MAX (0xffffffff)
#endif /* __ASM_ARCH_TICK_H */
arch/arm/mach-s5pc100/mach-smdkc100.c
View file @ cf2afdc5
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/gpio.h> #include <linux/gpio.h>
...@@ -37,7 +38,6 @@ ...@@ -37,7 +38,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
#include <plat/clock.h> #include <plat/clock.h>
......
arch/arm/mach-s5pv210/common.c
View file @ cf2afdc5
...@@ -24,6 +24,7 @@ ...@@ -24,6 +24,7 @@
#include <linux/sched.h> #include <linux/sched.h>
#include <linux/dma-mapping.h> #include <linux/dma-mapping.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <asm/proc-fns.h> #include <asm/proc-fns.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
...@@ -46,7 +47,6 @@ ...@@ -46,7 +47,6 @@
#include <plat/pwm-core.h> #include <plat/pwm-core.h>
#include <plat/tv-core.h> #include <plat/tv-core.h>
#include <plat/spi-core.h> #include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include "common.h" #include "common.h"
......
arch/arm/mach-s5pv210/include/mach/debug-macro.S
View file @ cf2afdc5
...@@ -12,8 +12,8 @@ ...@@ -12,8 +12,8 @@
/* pull in the relevant register and map files. */ /* pull in the relevant register and map files. */
#include <linux/serial_s3c.h>
#include <mach/map.h> #include <mach/map.h>
#include <plat/regs-serial.h>
/* note, for the boot process to work we have to keep the UART /* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1 * virtual address aligned to an 1MiB boundary for the L1
......
arch/arm/mach-s5pv210/mach-aquila.c
View file @ cf2afdc5
...@@ -12,6 +12,7 @@ ...@@ -12,6 +12,7 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/fb.h> #include <linux/fb.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/i2c-gpio.h> #include <linux/i2c-gpio.h>
...@@ -32,7 +33,6 @@ ...@@ -32,7 +33,6 @@
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/fb.h> #include <plat/fb.h>
......
arch/arm/mach-s5pv210/mach-goni.c
View file @ cf2afdc5
...@@ -12,6 +12,7 @@ ...@@ -12,6 +12,7 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/fb.h> #include <linux/fb.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/i2c-gpio.h> #include <linux/i2c-gpio.h>
...@@ -39,7 +40,6 @@ ...@@ -39,7 +40,6 @@
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/cpu.h> #include <plat/cpu.h>
#include <plat/fb.h> #include <plat/fb.h>
......
arch/arm/mach-s5pv210/mach-smdkc110.c
View file @ cf2afdc5
...@@ -12,6 +12,7 @@ ...@@ -12,6 +12,7 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/device.h> #include <linux/device.h>
...@@ -23,7 +24,6 @@ ...@@ -23,7 +24,6 @@
#include <mach/map.h> #include <mach/map.h>
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/cpu.h> #include <plat/cpu.h>
#include <linux/platform_data/ata-samsung_cf.h> #include <linux/platform_data/ata-samsung_cf.h>
......
arch/arm/mach-s5pv210/mach-smdkv210.c
View file @ cf2afdc5
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/dm9000.h> #include <linux/dm9000.h>
#include <linux/fb.h> #include <linux/fb.h>
...@@ -32,7 +33,6 @@ ...@@ -32,7 +33,6 @@
#include <mach/map.h> #include <mach/map.h>
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h> #include <plat/regs-srom.h>
#include <plat/gpio-cfg.h> #include <plat/gpio-cfg.h>
#include <plat/devs.h> #include <plat/devs.h>
......
arch/arm/mach-s5pv210/mach-torbreck.c
View file @ cf2afdc5
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach/map.h> #include <asm/mach/map.h>
...@@ -22,7 +23,6 @@ ...@@ -22,7 +23,6 @@
#include <mach/map.h> #include <mach/map.h>
#include <mach/regs-clock.h> #include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <plat/devs.h> #include <plat/devs.h>
#include <plat/cpu.h> #include <plat/cpu.h>
#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h>
......
arch/arm/plat-samsung/clock.c
View file @ cf2afdc5
This diff is collapsed.
arch/arm/plat-samsung/cpu.c
View file @ cf2afdc5
This diff is collapsed.
arch/arm/plat-samsung/devs.c
View file @ cf2afdc5
This diff is collapsed.
arch/arm/plat-samsung/include/plat/cpu.h
View file @ cf2afdc5
This diff is collapsed.
arch/arm/plat-samsung/include/plat/regs-serial.h deleted 100644 → 0
View file @ 32adc19d
This diff is collapsed.
arch/arm/plat-samsung/init.c
View file @ cf2afdc5
This diff is collapsed.
arch/arm/plat-samsung/pm-gpio.c
View file @ cf2afdc5
This diff is collapsed.
arch/arm/plat-samsung/pm.c
View file @ cf2afdc5
This diff is collapsed.
arch/arm/plat-samsung/s5p-irq-pm.c
View file @ cf2afdc5
This diff is collapsed.
drivers/clk/samsung/clk-exynos4.c
View file @ cf2afdc5
This diff is collapsed.
drivers/clk/samsung/clk-exynos5250.c
View file @ cf2afdc5
This diff is collapsed.
drivers/clk/samsung/clk-exynos5420.c
View file @ cf2afdc5
This diff is collapsed.
drivers/clk/samsung/clk-exynos5440.c
View file @ cf2afdc5
This diff is collapsed.
drivers/clk/samsung/clk-s3c64xx.c
View file @ cf2afdc5
This diff is collapsed.
drivers/clk/samsung/clk.c
View file @ cf2afdc5
This diff is collapsed.
drivers/clk/samsung/clk.h
View file @ cf2afdc5
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7