Commit cf633464 authored by Mark Zhang's avatar Mark Zhang Committed by Stephen Warren

ARM: dt: tegra: ventana: define pinmux for ddc

Tegra 2's I2C2 controller can be routed to either the PTA
or DDC pin group on Ventana. So:
- Remove the HDMI function definition of pta pingroup
- Define child i2c adapters(ddc & pta) for I2C2 controller
Signed-off-by: default avatarMark Zhang <markz@nvidia.com>
Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
parent 6fb11131
......@@ -64,11 +64,6 @@ dap4 {
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
ddc {
nvidia,pins = "ddc", "owc", "spdi", "spdo",
"uac";
nvidia,function = "rsvd2";
};
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
nvidia,function = "vi";
......@@ -98,7 +93,7 @@ gpv {
nvidia,function = "pcie";
};
hdint {
nvidia,pins = "hdint", "pta";
nvidia,pins = "hdint";
nvidia,function = "hdmi";
};
i2cp {
......@@ -129,6 +124,10 @@ ld0 {
"lspi", "lvp1", "lvs";
nvidia,function = "displaya";
};
owc {
nvidia,pins = "owc", "spdi", "spdo", "uac";
nvidia,function = "rsvd2";
};
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
......@@ -248,6 +247,39 @@ drive_sdio1 {
nvidia,slew-rate-falling = <3>;
};
};
state_i2cmux_ddc: pinmux_i2cmux_ddc {
ddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
};
pta {
nvidia,pins = "pta";
nvidia,function = "rsvd4";
};
};
state_i2cmux_pta: pinmux_i2cmux_pta {
ddc {
nvidia,pins = "ddc";
nvidia,function = "rsvd4";
};
pta {
nvidia,pins = "pta";
nvidia,function = "i2c2";
};
};
state_i2cmux_idle: pinmux_i2cmux_idle {
ddc {
nvidia,pins = "ddc";
nvidia,function = "rsvd4";
};
pta {
nvidia,pins = "pta";
nvidia,function = "rsvd4";
};
};
};
i2s@70002800 {
......@@ -291,6 +323,31 @@ i2c@7000c400 {
clock-frequency = <400000>;
};
i2cmux {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&{/i2c@7000c400}>;
pinctrl-names = "ddc", "pta", "idle";
pinctrl-0 = <&state_i2cmux_ddc>;
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
};
i2c@7000c500 {
status = "okay";
clock-frequency = <400000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment