clk: sunxi: factors: Consolidate get_factors parameters into a struct

The .get_factors callback of factors_clk has 6 parameters. To extend
factors_clk in any way that requires adding parameters to .get_factors
would make that list even longer, not to mention changing all the
function declarations.

Do this once now and consolidate all the parameters into a struct.
Also drop the space before function pointer arguments, since checkpatch
complains.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

drivers/clk/sunxi/clk-factors.c

@@ -73,8 +73,13 @@ static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate,
 				   unsigned long *parent_rate)
 {
 	struct clk_factors *factors = to_clk_factors(hw);
-	factors->get_factors((u32 *)&rate, (u32)*parent_rate,
-			     NULL, NULL, NULL, NULL);
+	struct factors_request req = {
+		.rate = rate,
+		.parent_rate = *parent_rate,
+	};
+
+	factors->get_factors(&req);
+
 
 	return rate;
 }
@@ -120,13 +125,16 @@ static int clk_factors_determine_rate(struct clk_hw *hw,
 static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
 				unsigned long parent_rate)
 {
-	u8 n = 0, k = 0, m = 0, p = 0;
+	struct factors_request req = {
+		.rate = rate,
+		.parent_rate = parent_rate,
+	};
 	u32 reg;
 	struct clk_factors *factors = to_clk_factors(hw);
 	const struct clk_factors_config *config = factors->config;
 	unsigned long flags = 0;
 
-	factors->get_factors((u32 *)&rate, (u32)parent_rate, &n, &k, &m, &p);
+	factors->get_factors(&req);
 
 	if (factors->lock)
 		spin_lock_irqsave(factors->lock, flags);
@@ -135,10 +143,10 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
 	reg = readl(factors->reg);
 
 	/* Set up the new factors - macros do not do anything if width is 0 */
-	reg = FACTOR_SET(config->nshift, config->nwidth, reg, n);
-	reg = FACTOR_SET(config->kshift, config->kwidth, reg, k);
-	reg = FACTOR_SET(config->mshift, config->mwidth, reg, m);
-	reg = FACTOR_SET(config->pshift, config->pwidth, reg, p);
+	reg = FACTOR_SET(config->nshift, config->nwidth, reg, req.n);
+	reg = FACTOR_SET(config->kshift, config->kwidth, reg, req.k);
+	reg = FACTOR_SET(config->mshift, config->mwidth, reg, req.m);
+	reg = FACTOR_SET(config->pshift, config->pwidth, reg, req.p);
 
 	/* Apply them now */
 	writel(reg, factors->reg);

drivers/clk/sunxi/clk-factors.h

@@ -19,12 +19,21 @@ struct clk_factors_config {
 	u8 n_start;
 };
 
+struct factors_request {
+	unsigned long rate;
+	unsigned long parent_rate;
+	u8 n;
+	u8 k;
+	u8 m;
+	u8 p;
+};
+
 struct factors_data {
 	int enable;
 	int mux;
 	int muxmask;
 	const struct clk_factors_config *table;
-	void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p);
+	void (*getter)(struct factors_request *req);
 	const char *name;
 };
 
@@ -32,7 +41,7 @@ struct clk_factors {
 	struct clk_hw hw;
 	void __iomem *reg;
 	const struct clk_factors_config *config;
-	void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p);
+	void (*get_factors)(struct factors_request *req);
 	spinlock_t *lock;
 	/* for cleanup */
 	struct clk_mux *mux;

drivers/clk/sunxi/clk-mod0.c

@@ -28,17 +28,16 @@
  * rate = (parent_rate >> p) / (m + 1);
  */
 
-static void sun4i_a10_get_mod0_factors(u32 *freq, u32 parent_rate,
-				       u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun4i_a10_get_mod0_factors(struct factors_request *req)
 {
 	u8 div, calcm, calcp;
 
 	/* These clocks can only divide, so we will never be able to achieve
 	 * frequencies higher than the parent frequency */
-	if (*freq > parent_rate)
-		*freq = parent_rate;
+	if (req->rate > req->parent_rate)
+		req->rate = req->parent_rate;
 
-	div = DIV_ROUND_UP(parent_rate, *freq);
+	div = DIV_ROUND_UP(req->parent_rate, req->rate);
 
 	if (div < 16)
 		calcp = 0;
@@ -51,14 +50,9 @@ static void sun4i_a10_get_mod0_factors(u32 *freq, u32 parent_rate,
 
 	calcm = DIV_ROUND_UP(div, 1 << calcp);
 
-	*freq = (parent_rate >> calcp) / calcm;
-
-	/* we were called to round the frequency, we can now return */
-	if (n == NULL)
-		return;
-
-	*m = calcm - 1;
-	*p = calcp;
+	req->rate = (req->parent_rate >> calcp) / calcm;
+	req->m = calcm - 1;
+	req->p = calcp;
 }
 
 /* user manual says "n" but it's really "p" */

drivers/clk/sunxi/clk-sun8i-mbus.c

@@ -26,8 +26,7 @@
  * rate = parent_rate / (m + 1);
  */
 
-static void sun8i_a23_get_mbus_factors(u32 *freq, u32 parent_rate,
-				       u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun8i_a23_get_mbus_factors(struct factors_request *req)
 {
 	u8 div;
 
@@ -35,21 +34,16 @@ static void sun8i_a23_get_mbus_factors(u32 *freq, u32 parent_rate,
 	 * These clocks can only divide, so we will never be able to
 	 * achieve frequencies higher than the parent frequency
 	 */
-	if (*freq > parent_rate)
-		*freq = parent_rate;
+	if (req->rate > req->parent_rate)
+		req->rate = req->parent_rate;
 
-	div = DIV_ROUND_UP(parent_rate, *freq);
+	div = DIV_ROUND_UP(req->parent_rate, req->rate);
 
 	if (div > 8)
 		div = 8;
 
-	*freq = parent_rate / div;
-
-	/* we were called to round the frequency, we can now return */
-	if (m == NULL)
-		return;
-
-	*m = div - 1;
+	req->rate = req->parent_rate / div;
+	req->m = div - 1;
 }
 
 static struct clk_factors_config sun8i_a23_mbus_config = {

drivers/clk/sunxi/clk-sun9i-core.c

@@ -32,15 +32,14 @@
  * p and m are named div1 and div2 in Allwinner's SDK
  */
 
-static void sun9i_a80_get_pll4_factors(u32 *freq, u32 parent_rate,
-				       u8 *n_ret, u8 *k, u8 *m_ret, u8 *p_ret)
+static void sun9i_a80_get_pll4_factors(struct factors_request *req)
 {
 	int n;
 	int m = 1;
 	int p = 1;
 
 	/* Normalize value to a 6 MHz multiple (24 MHz / 4) */
-	n = DIV_ROUND_UP(*freq, 6000000);
+	n = DIV_ROUND_UP(req->rate, 6000000);
 
 	/* If n is too large switch to steps of 12 MHz */
 	if (n > 255) {
@@ -60,15 +59,10 @@ static void sun9i_a80_get_pll4_factors(u32 *freq, u32 parent_rate,
 	else if (n < 12)
 		n = 12;
 
-	*freq = ((24000000 * n) >> p) / (m + 1);
-
-	/* we were called to round the frequency, we can now return */
-	if (n_ret == NULL)
-		return;
-
-	*n_ret = n;
-	*m_ret = m;
-	*p_ret = p;
+	req->rate = ((24000000 * n) >> p) / (m + 1);
+	req->n = n;
+	req->m = m;
+	req->p = p;
 }
 
 static const struct clk_factors_config sun9i_a80_pll4_config = {
@@ -111,27 +105,21 @@ CLK_OF_DECLARE(sun9i_a80_pll4, "allwinner,sun9i-a80-pll4-clk", sun9i_a80_pll4_se
  * rate = parent_rate / (m + 1);
  */
 
-static void sun9i_a80_get_gt_factors(u32 *freq, u32 parent_rate,
-				     u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun9i_a80_get_gt_factors(struct factors_request *req)
 {
 	u32 div;
 
-	if (parent_rate < *freq)
-		*freq = parent_rate;
+	if (req->parent_rate < req->rate)
+		req->rate = req->parent_rate;
 
-	div = DIV_ROUND_UP(parent_rate, *freq);
+	div = DIV_ROUND_UP(req->parent_rate, req->rate);
 
 	/* maximum divider is 4 */
 	if (div > 4)
 		div = 4;
 
-	*freq = parent_rate / div;
-
-	/* we were called to round the frequency, we can now return */
-	if (!m)
-		return;
-
-	*m = div;
+	req->rate = req->parent_rate / div;
+	req->m = div;
 }
 
 static const struct clk_factors_config sun9i_a80_gt_config = {
@@ -176,27 +164,21 @@ CLK_OF_DECLARE(sun9i_a80_gt, "allwinner,sun9i-a80-gt-clk", sun9i_a80_gt_setup);
  * rate = parent_rate >> p;
  */
 
-static void sun9i_a80_get_ahb_factors(u32 *freq, u32 parent_rate,
-				      u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun9i_a80_get_ahb_factors(struct factors_request *req)
 {
 	u32 _p;
 
-	if (parent_rate < *freq)
-		*freq = parent_rate;
+	if (req->parent_rate < req->rate)
+		req->rate = req->parent_rate;
 
-	_p = order_base_2(DIV_ROUND_UP(parent_rate, *freq));
+	_p = order_base_2(DIV_ROUND_UP(req->parent_rate, req->rate));
 
 	/* maximum p is 3 */
 	if (_p > 3)
 		_p = 3;
 
-	*freq = parent_rate >> _p;
-
-	/* we were called to round the frequency, we can now return */
-	if (!p)
-		return;
-
-	*p = _p;
+	req->rate = req->parent_rate >> _p;
+	req->p = _p;
 }
 
 static const struct clk_factors_config sun9i_a80_ahb_config = {
@@ -262,31 +244,22 @@ CLK_OF_DECLARE(sun9i_a80_apb0, "allwinner,sun9i-a80-apb0-clk", sun9i_a80_apb0_se
  * rate = (parent_rate >> p) / (m + 1);
  */
 
-static void sun9i_a80_get_apb1_factors(u32 *freq, u32 parent_rate,
-				       u8 *n, u8 *k, u8 *m, u8 *p)
+static void sun9i_a80_get_apb1_factors(struct factors_request *req)
 {
 	u32 div;
-	u8 calcm, calcp;
 
-	if (parent_rate < *freq)
-		*freq = parent_rate;
+	if (req->parent_rate < req->rate)
+		req->rate = req->parent_rate;
 
-	div = DIV_ROUND_UP(parent_rate, *freq);
+	div = DIV_ROUND_UP(req->parent_rate, req->rate);
 
 	/* Highest possible divider is 256 (p = 3, m = 31) */
 	if (div > 256)
 		div = 256;
 
-	calcp = order_base_2(div);
-	calcm = (parent_rate >> calcp) - 1;
-	*freq = (parent_rate >> calcp) / (calcm + 1);
-
-	/* we were called to round the frequency, we can now return */
-	if (n == NULL)
-		return;
-
-	*m = calcm;
-	*p = calcp;
+	req->p = order_base_2(div);
+	req->m = (req->parent_rate >> req->p) - 1;
+	req->rate = (req->parent_rate >> req->p) / (req->m + 1);
 }
 
 static const struct clk_factors_config sun9i_a80_apb1_config = {