Merge branch 'devel' into for-next

arch/blackfin/Kconfig

@@ -52,6 +52,9 @@ config GENERIC_BUG
 config ZONE_DMA
 	def_bool y
 
+config GENERIC_GPIO
+	def_bool y
+
 config FORCE_MAX_ZONEORDER
 	int
 	default "14"
@@ -317,6 +320,14 @@ config BF53x
 	depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
 	default y
 
+config GPIO_ADI
+	def_bool y
+	depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
+
+config PINCTRL
+	def_bool y
+	depends on BF54x || BF60x
+
 config MEM_MT48LC64M4A2FB_7E
 	bool
 	depends on (BFIN533_STAMP)

arch/blackfin/include/asm/gpio.h

@@ -25,8 +25,12 @@
 
 #ifndef __ASSEMBLY__
 
+#ifndef CONFIG_PINCTRL
+
 #include <linux/compiler.h>
-#include <linux/gpio.h>
+#include <asm/blackfin.h>
+#include <asm/portmux.h>
+#include <asm/irq_handler.h>
 
 /***********************************************************
 *
@@ -45,7 +49,6 @@
 * MODIFICATION HISTORY :
 **************************************************************/
 
-#if !BFIN_GPIO_PINT
 void set_gpio_dir(unsigned, unsigned short);
 void set_gpio_inen(unsigned, unsigned short);
 void set_gpio_polar(unsigned, unsigned short);
@@ -115,7 +118,6 @@ struct gpio_port_t {
 	unsigned short dummy16;
 	unsigned short inen;
 };
-#endif
 
 #ifdef BFIN_SPECIAL_GPIO_BANKS
 void bfin_special_gpio_free(unsigned gpio);
@@ -127,25 +129,21 @@ void bfin_special_gpio_pm_hibernate_suspend(void);
 #endif
 
 #ifdef CONFIG_PM
-int bfin_pm_standby_ctrl(unsigned ctrl);
+void bfin_gpio_pm_hibernate_restore(void);
+void bfin_gpio_pm_hibernate_suspend(void);
+int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);
+int bfin_gpio_pm_standby_ctrl(unsigned ctrl);
 
 static inline int bfin_pm_standby_setup(void)
 {
-	return bfin_pm_standby_ctrl(1);
+	return bfin_gpio_pm_standby_ctrl(1);
 }
 
 static inline void bfin_pm_standby_restore(void)
 {
-	bfin_pm_standby_ctrl(0);
+	bfin_gpio_pm_standby_ctrl(0);
 }
 
-void bfin_gpio_pm_hibernate_restore(void);
-void bfin_gpio_pm_hibernate_suspend(void);
-void bfin_pint_suspend(void);
-void bfin_pint_resume(void);
-
-# if !BFIN_GPIO_PINT
-int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);
 
 struct gpio_port_s {
 	unsigned short data;
@@ -161,7 +159,6 @@ struct gpio_port_s {
 	unsigned short reserved;
 	unsigned short mux;
 };
-# endif
 #endif /*CONFIG_PM*/
 
 /***********************************************************
@@ -178,35 +175,28 @@ struct gpio_port_s {
 *************************************************************
 * MODIFICATION HISTORY :
 **************************************************************/
-
-int bfin_gpio_request(unsigned gpio, const char *label);
-void bfin_gpio_free(unsigned gpio);
 int bfin_gpio_irq_request(unsigned gpio, const char *label);
 void bfin_gpio_irq_free(unsigned gpio);
-int bfin_gpio_direction_input(unsigned gpio);
-int bfin_gpio_direction_output(unsigned gpio, int value);
-int bfin_gpio_get_value(unsigned gpio);
-void bfin_gpio_set_value(unsigned gpio, int value);
+void bfin_gpio_irq_prepare(unsigned gpio);
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq - GPIO_IRQ_BASE;
+}
+#endif /* CONFIG_PINCTRL */
 
 #include <asm/irq.h>
 #include <asm/errno.h>
 
-#ifdef CONFIG_GPIOLIB
 #include <asm-generic/gpio.h>		/* cansleep wrappers */
 
 static inline int gpio_get_value(unsigned int gpio)
 {
-	if (gpio < MAX_BLACKFIN_GPIOS)
-		return bfin_gpio_get_value(gpio);
-	else
 	return __gpio_get_value(gpio);
 }
 
 static inline void gpio_set_value(unsigned int gpio, int value)
 {
-	if (gpio < MAX_BLACKFIN_GPIOS)
-		bfin_gpio_set_value(gpio, value);
-	else
 	__gpio_set_value(gpio, value);
 }
 
@@ -219,113 +209,6 @@ static inline int gpio_to_irq(unsigned gpio)
 {
 	return __gpio_to_irq(gpio);
 }
-
-#else /* !CONFIG_GPIOLIB */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return bfin_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	return bfin_gpio_free(gpio);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	return bfin_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return bfin_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-{
-	return -EINVAL;
-}
-
-static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
-{
-	int err;
-
-	err = bfin_gpio_request(gpio, label);
-	if (err)
-		return err;
-
-	if (flags & GPIOF_DIR_IN)
-		err = bfin_gpio_direction_input(gpio);
-	else
-		err = bfin_gpio_direction_output(gpio,
-			(flags & GPIOF_INIT_HIGH) ? 1 : 0);
-
-	if (err)
-		bfin_gpio_free(gpio);
-
-	return err;
-}
-
-static inline int gpio_request_array(const struct gpio *array, size_t num)
-{
-	int i, err;
-
-	for (i = 0; i < num; i++, array++) {
-		err = gpio_request_one(array->gpio, array->flags, array->label);
-		if (err)
-			goto err_free;
-	}
-	return 0;
-
-err_free:
-	while (i--)
-		bfin_gpio_free((--array)->gpio);
-	return err;
-}
-
-static inline void gpio_free_array(const struct gpio *array, size_t num)
-{
-	while (num--)
-		bfin_gpio_free((array++)->gpio);
-}
-
-static inline int __gpio_get_value(unsigned gpio)
-{
-	return bfin_gpio_get_value(gpio);
-}
-
-static inline void __gpio_set_value(unsigned gpio, int value)
-{
-	return bfin_gpio_set_value(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	return __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (likely(gpio < MAX_BLACKFIN_GPIOS))
-		return gpio + GPIO_IRQ_BASE;
-
-	return -EINVAL;
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-#endif	/* !CONFIG_GPIOLIB */
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return (irq - GPIO_IRQ_BASE);
-}
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* __ARCH_BLACKFIN_GPIO_H__ */

arch/blackfin/include/asm/portmux.h

@@ -17,14 +17,29 @@
 #define P_MAYSHARE	0x2000
 #define P_DONTCARE	0x1000
 
-
+#ifdef CONFIG_PINCTRL
+#include <asm/irq_handler.h>
+
+#define gpio_pint_regs bfin_pint_regs
+#define adi_internal_set_wake bfin_internal_set_wake
+
+#define peripheral_request(per, label) 0
+#define peripheral_free(per)
+#define peripheral_request_list(per, label) \
+	(pdev ? (IS_ERR(devm_pinctrl_get_select_default(&pdev->dev)) \
+	? -EINVAL : 0) : 0)
+#define peripheral_free_list(per)
+#else
 int peripheral_request(unsigned short per, const char *label);
 void peripheral_free(unsigned short per);
 int peripheral_request_list(const unsigned short per[], const char *label);
 void peripheral_free_list(const unsigned short per[]);
+#endif
 
-#include <asm/gpio.h>
+#include <linux/err.h>
+#include <linux/pinctrl/pinctrl.h>
 #include <mach/portmux.h>
+#include <linux/gpio.h>
 
 #ifndef P_SPORT2_TFS
 #define P_SPORT2_TFS P_UNDEF

arch/blackfin/kernel/Makefile

@@ -7,7 +7,7 @@ extra-y := vmlinux.lds
 obj-y := \
 	entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
 	sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \
-	fixed_code.o reboot.o bfin_gpio.o bfin_dma.o \
+	fixed_code.o reboot.o bfin_dma.o \
 	exception.o dumpstack.o
 
 ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y)
@@ -16,6 +16,7 @@ else
     obj-y += time.o
 endif
 
+obj-$(CONFIG_GPIO_ADI)               += bfin_gpio.o
 obj-$(CONFIG_DYNAMIC_FTRACE)         += ftrace.o
 obj-$(CONFIG_FUNCTION_TRACER)        += ftrace-entry.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)  += ftrace.o

arch/blackfin/mach-bf548/include/mach/portmux.h

@@ -7,8 +7,6 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
-
 #define P_SPORT2_TFS	(P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0))
 #define P_SPORT2_DTSEC	(P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0))
 #define P_SPORT2_DTPRI	(P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0))

arch/blackfin/mach-bf609/include/mach/portmux.h

@@ -7,8 +7,6 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
-
 /* EMAC RMII Port Mux */
 #define P_MII0_MDC	(P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0))
 #define P_MII0_MDIO	(P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0))

drivers/pinctrl/Kconfig

@@ -49,6 +49,24 @@ config PINCTRL_AB8505
 	bool "AB8505 pin controller driver"
 	depends on PINCTRL_ABX500 && ARCH_U8500
 
+config PINCTRL_ADI2
+	bool "ADI pin controller driver"
+	depends on BLACKFIN
+	select PINMUX
+	select IRQ_DOMAIN
+	help
+	  This is the pin controller and gpio driver for ADI BF54x, BF60x and
+	  future processors. This option is selected automatically when specific
+	  machine and arch are selected to build.
+
+config PINCTRL_BF54x
+	def_bool y if BF54x
+	select PINCTRL_ADI2
+
+config PINCTRL_BF60x
+	def_bool y if BF60x
+	select PINCTRL_ADI2
+
 config PINCTRL_AT91
 	bool "AT91 pinctrl driver"
 	depends on OF

drivers/pinctrl/Makefile

@@ -14,6 +14,9 @@ obj-$(CONFIG_PINCTRL_AB8500)	+= pinctrl-ab8500.o
 obj-$(CONFIG_PINCTRL_AB8540)	+= pinctrl-ab8540.o
 obj-$(CONFIG_PINCTRL_AB9540)	+= pinctrl-ab9540.o
 obj-$(CONFIG_PINCTRL_AB8505)	+= pinctrl-ab8505.o
+obj-$(CONFIG_PINCTRL_ADI2)	+= pinctrl-adi2.o
+obj-$(CONFIG_PINCTRL_BF54x)	+= pinctrl-adi2-bf54x.o
+obj-$(CONFIG_PINCTRL_BF60x)	+= pinctrl-adi2-bf60x.o
 obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
 obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
 obj-$(CONFIG_PINCTRL_BAYTRAIL)	+= pinctrl-baytrail.o

drivers/pinctrl/pinctrl-adi2.h

+/*
+ * Pinctrl Driver for ADI GPIO2 controller
+ *
+ * Copyright 2007-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPLv2 or later
+ */
+
+#ifndef PINCTRL_PINCTRL_ADI2_H
+#define PINCTRL_PINCTRL_ADI2_H
+
+#include <linux/pinctrl/pinctrl.h>
+
+ /**
+ * struct adi_pin_group - describes a pin group
+ * @name: the name of this pin group
+ * @pins: an array of pins
+ * @num: the number of pins in this array
+ */
+struct adi_pin_group {
+	const char *name;
+	const unsigned *pins;
+	const unsigned num;
+};
+
+#define ADI_PIN_GROUP(n, p)  \
+	{			\
+		.name = n,	\
+		.pins = p,	\
+		.num = ARRAY_SIZE(p),	\
+	}
+
+ /**
+ * struct adi_pmx_func - describes function mux setting of pin groups
+ * @name: the name of this function mux setting
+ * @groups: an array of pin groups
+ * @num_groups: the number of pin groups in this array
+ * @mux: the function mux setting array, end by zero
+ */
+struct adi_pmx_func {
+	const char *name;
+	const char * const *groups;
+	const unsigned num_groups;
+	const unsigned short *mux;
+};
+
+#define ADI_PMX_FUNCTION(n, g, m)		\
+	{					\
+		.name = n,			\
+		.groups = g,			\
+		.num_groups = ARRAY_SIZE(g),	\
+		.mux = m,			\
+	}
+
+/**
+ * struct adi_pinctrl_soc_data - ADI pin controller per-SoC configuration
+ * @functions:  The functions supported on this SoC.
+ * @nfunction:  The number of entries in @functions.
+ * @groups:     An array describing all pin groups the pin SoC supports.
+ * @ngroups:    The number of entries in @groups.
+ * @pins:       An array describing all pins the pin controller affects.
+ * @npins:      The number of entries in @pins.
+ */
+struct adi_pinctrl_soc_data {
+	const struct adi_pmx_func *functions;
+	int nfunctions;
+	const struct adi_pin_group *groups;
+	int ngroups;
+	const struct pinctrl_pin_desc *pins;
+	int npins;
+};
+
+void adi_pinctrl_soc_init(const struct adi_pinctrl_soc_data **soc);
+
+#endif /* PINCTRL_PINCTRL_ADI2_H */

include/linux/platform_data/pinctrl-adi2.h

+/*
+ * Pinctrl Driver for ADI GPIO2 controller
+ *
+ * Copyright 2007-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPLv2 or later
+ */
+
+
+#ifndef PINCTRL_ADI2_H
+#define PINCTRL_ADI2_H
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+/**
+ * struct adi_pinctrl_gpio_platform_data - Pinctrl gpio platform data
+ * for ADI GPIO2 device.
+ *
+ * @port_gpio_base: Optional global GPIO index of the GPIO bank.
+ *                 0 means driver decides.
+ * @port_pin_base: Pin index of the pin controller device.
+ * @port_width: PIN number of the GPIO bank device
+ * @pint_id: GPIO PINT device id that this GPIO bank should map to.
+ * @pint_assign: The 32-bit GPIO PINT registers can be divided into 2 parts. A
+ *               GPIO bank can be mapped into either low 16 bits[0] or high 16
+ *               bits[1] of each PINT register.
+ * @pint_map: GIOP bank mapping code in PINT device
+ */
+struct adi_pinctrl_gpio_platform_data {
+	unsigned int port_gpio_base;
+	unsigned int port_pin_base;
+	unsigned int port_width;
+	u8 pinctrl_id;
+	u8 pint_id;
+	bool pint_assign;
+	u8 pint_map;
+};
+
+#endif