staging: r8188eu: change rtw_ieee80211_ht_cap type of structures members to ieee80211_ht_cap

Also cap_info member of ieee80211_ht_cap wrapped by le16_to_cpu function.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8188eu/core/rtw_ap.c

@@ -481,7 +481,7 @@ void add_RATid(struct adapter *padapter, struct sta_info *psta, u8 rssi_level)
 			limit = 8;/*   1R */
 
 		for (i = 0; i < limit; i++) {
-			if (psta_ht->ht_cap.supp_mcs_set[i/8] & BIT(i%8))
+			if (psta_ht->ht_cap.mcs.rx_mask[i / 8] & BIT(i % 8))
 				tx_ra_bitmap |= BIT(i+12);
 		}
 
@@ -658,11 +658,15 @@ void update_sta_info_apmode(struct adapter *padapter, struct sta_info *psta)
 		phtpriv_sta->ampdu_enable = phtpriv_ap->ampdu_enable;
 
 		/* check if sta support s Short GI */
-		if ((phtpriv_sta->ht_cap.cap_info & phtpriv_ap->ht_cap.cap_info) & (IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40))
+		if (le16_to_cpu(phtpriv_sta->ht_cap.cap_info &
+				phtpriv_ap->ht_cap.cap_info) &
+		    (IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40))
 			phtpriv_sta->sgi = true;
 
 		/*  bwmode */
-		if ((phtpriv_sta->ht_cap.cap_info & phtpriv_ap->ht_cap.cap_info) & IEEE80211_HT_CAP_SUP_WIDTH) {
+		if (le16_to_cpu(phtpriv_sta->ht_cap.cap_info &
+				phtpriv_ap->ht_cap.cap_info) &
+		    IEEE80211_HT_CAP_SUP_WIDTH) {
 			phtpriv_sta->bwmode = pmlmeext->cur_bwmode;
 			phtpriv_sta->ch_offset = pmlmeext->cur_ch_offset;
 		}
@@ -1422,7 +1426,8 @@ static int rtw_ht_operation_update(struct adapter *padapter)
 	if (pmlmepriv->num_sta_no_ht ||
 	    (pmlmepriv->ht_op_mode & HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT))
 		new_op_mode = OP_MODE_MIXED;
-	else if ((phtpriv_ap->ht_cap.cap_info & IEEE80211_HT_CAP_SUP_WIDTH) &&
+	else if ((le16_to_cpu(phtpriv_ap->ht_cap.cap_info) &
+		  IEEE80211_HT_CAP_SUP_WIDTH) &&
 		 pmlmepriv->num_sta_ht_20mhz)
 		new_op_mode = OP_MODE_20MHZ_HT_STA_ASSOCED;
 	else if (pmlmepriv->olbc_ht)
@@ -1552,7 +1557,7 @@ void bss_cap_update_on_sta_join(struct adapter *padapter, struct sta_info *psta)
 	}
 
 	if (psta->flags & WLAN_STA_HT) {
-		u16 ht_capab = psta->htpriv.ht_cap.cap_info;
+		u16 ht_capab = le16_to_cpu(psta->htpriv.ht_cap.cap_info);
 
 		DBG_88E("HT: STA %pM HT Capabilities Info: 0x%04x\n",
 			(psta->hwaddr), ht_capab);

drivers/staging/rtl8188eu/include/ieee80211.h

@@ -239,7 +239,7 @@ struct ieee_param {
 			u16 capability;
 			int flags;
 			u8 tx_supp_rates[16];
-			struct rtw_ieee80211_ht_cap ht_cap;
+			struct ieee80211_ht_cap ht_cap;
 		} add_sta;
 		struct {
 			u8	reserved[2];/* for set max_num_sta */
@@ -264,7 +264,7 @@ struct sta_data {
 	u32 sta_set;
 	u8 tx_supp_rates[16];
 	u32 tx_supp_rates_len;
-	struct rtw_ieee80211_ht_cap ht_cap;
+	struct ieee80211_ht_cap ht_cap;
 	u64	rx_pkts;
 	u64	rx_bytes;
 	u64	rx_drops;

drivers/staging/rtl8188eu/include/rtw_ht.h

@@ -15,8 +15,8 @@
 #ifndef _RTW_HT_H_
 #define _RTW_HT_H_
 
+#include <linux/ieee80211.h>
 #include <osdep_service.h>
-#include "wifi.h"
 
 struct ht_priv {
 	u32	ht_option;
@@ -33,7 +33,7 @@ struct ht_priv {
 	u8	agg_enable_bitmap;
 	u8	candidate_tid_bitmap;
 
-	struct rtw_ieee80211_ht_cap ht_cap;
+	struct ieee80211_ht_cap ht_cap;
 };
 
 #endif	/* _RTL871X_HT_H_ */