ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common

This will simplify the adding of the A9260.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/boot/dts/usb_a9260_common.dtsi

+/*
+ * usb_a926x.dts - Device Tree file for Caloa USB A926x board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 0>;
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 1>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 1>;
+			linux,code = <28>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+	};
+};

arch/arm/boot/dts/usb_a9g20.dts

@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 /include/ "at91sam9g20.dtsi"
+/include/ "usb_a9260_common.dtsi"
 
 / {
 	model = "Calao USB A9G20";
@@ -20,113 +21,7 @@ memory {
 		reg = <0x20000000 0x4000000>;
 	};
 
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
-				status = "okay";
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			barebox@20000 {
-				label = "barebox";
-				reg = <0x20000 0x40000>;
-			};
-
-			bareboxenv@60000 {
-				label = "bareboxenv";
-				reg = <0x60000 0x20000>;
-			};
-
-			bareboxenv2@80000 {
-				label = "bareboxenv2";
-				reg = <0x80000 0x20000>;
-			};
-
-			oftree@80000 {
-				label = "oftree";
-				reg = <0xa0000 0x20000>;
-			};
-
-			kernel@a0000 {
-				label = "kernel";
-				reg = <0xc0000 0x400000>;
-			};
-
-			rootfs@4a0000 {
-				label = "rootfs";
-				reg = <0x4c0000 0x7800000>;
-			};
-
-			data@7ca0000 {
-				label = "data";
-				reg = <0x7cc0000 0x8340000>;
-			};
-		};
-
-		usb0: ohci@00500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led {
-			label = "user_led";
-			gpios = <&pioB 21 1>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		user_pb {
-			label = "user_pb";
-			gpios = <&pioB 10 1>;
-			linux,code = <28>;
-			gpio-key,wakeup;
-		};
-	};
-
 	i2c@0 {
-		status = "okay";
-
 		rv3029c2@56 {
 			compatible = "rv3029c2";
 			reg = <0x56>;