Commit cff713ce authored by Christina Jacob's avatar Christina Jacob Committed by David S. Miller

octeontx2-pf: ethtool physical link configuration

Register set_link_ksetting callback with driver such that
link configurations parameters like advertised mode,speed, duplex
and autoneg can be configured.

below command
ethtool -s eth0 advertise 0x1 speed 10 duplex full autoneg on
Signed-off-by: default avatarChristina Jacob <cjacob@marvell.com>
Signed-off-by: default avatarSunil Goutham <sgoutham@marvell.com>
Signed-off-by: default avatarHariprasad Kelam <hkelam@marvell.com>
Reviewed-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 1a50280c
......@@ -1157,6 +1157,68 @@ static int otx2_get_link_ksettings(struct net_device *netdev,
return 0;
}
static void otx2_get_advertised_mode(const struct ethtool_link_ksettings *cmd,
u64 *mode)
{
u32 bit_pos;
/* Firmware does not support requesting multiple advertised modes
* return first set bit
*/
bit_pos = find_first_bit(cmd->link_modes.advertising,
__ETHTOOL_LINK_MODE_MASK_NBITS);
if (bit_pos != __ETHTOOL_LINK_MODE_MASK_NBITS)
*mode = bit_pos;
}
static int otx2_set_link_ksettings(struct net_device *netdev,
const struct ethtool_link_ksettings *cmd)
{
struct otx2_nic *pf = netdev_priv(netdev);
struct ethtool_link_ksettings cur_ks;
struct cgx_set_link_mode_req *req;
struct mbox *mbox = &pf->mbox;
int err = 0;
memset(&cur_ks, 0, sizeof(struct ethtool_link_ksettings));
if (!ethtool_validate_speed(cmd->base.speed) ||
!ethtool_validate_duplex(cmd->base.duplex))
return -EINVAL;
if (cmd->base.autoneg != AUTONEG_ENABLE &&
cmd->base.autoneg != AUTONEG_DISABLE)
return -EINVAL;
otx2_get_link_ksettings(netdev, &cur_ks);
/* Check requested modes against supported modes by hardware */
if (!bitmap_subset(cmd->link_modes.advertising,
cur_ks.link_modes.supported,
__ETHTOOL_LINK_MODE_MASK_NBITS))
return -EINVAL;
mutex_lock(&mbox->lock);
req = otx2_mbox_alloc_msg_cgx_set_link_mode(&pf->mbox);
if (!req) {
err = -ENOMEM;
goto end;
}
req->args.speed = cmd->base.speed;
/* firmware expects 1 for half duplex and 0 for full duplex
* hence inverting
*/
req->args.duplex = cmd->base.duplex ^ 0x1;
req->args.an = cmd->base.autoneg;
otx2_get_advertised_mode(cmd, &req->args.mode);
err = otx2_sync_mbox_msg(&pf->mbox);
end:
mutex_unlock(&mbox->lock);
return err;
}
static const struct ethtool_ops otx2_ethtool_ops = {
.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
ETHTOOL_COALESCE_MAX_FRAMES,
......@@ -1187,6 +1249,7 @@ static const struct ethtool_ops otx2_ethtool_ops = {
.get_fecparam = otx2_get_fecparam,
.set_fecparam = otx2_set_fecparam,
.get_link_ksettings = otx2_get_link_ksettings,
.set_link_ksettings = otx2_set_link_ksettings,
};
void otx2_set_ethtool_ops(struct net_device *netdev)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment