Commit cffc6c4c authored by David S. Miller's avatar David S. Miller

Merge tag 'master-2014-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

John W. Linville says:

====================
pull request: wireless 2014-09-11

Please pull this batch of fixes intended for the 3.17 stream:

For the mac80211 bits, Johannes says:

"Two more fixes for mac80211 - one of them addresses a long-standing
issue that we only found when using vendor events more frequently;
the other addresses some bad information being reported in userspace
that people were starting to actually look at."

For the iwlwifi bits, Emmanuel says:

"I re-enable scheduled scan on firmware that contain the fix for
the bug that Linus reported.  A few trivial fixes: endianity issues,
the same DTIM period fix that I did in mac80211.  Eyal fixes a few
issues we identified with EAPOL, we now send them just as if they were
management frames, this solves interrop issues.  Johannes has another
set of trivial fixes, while Luca fixes the way we configure the filters
in the firmware. Last but not least, a new device is added by Oren."

Emmanuel was traveling, resulting in his pull to be a bit larger than
I would have liked to see at this point.  FWIW, I have asked Emmanuel
to be much more strict for any more pull requests in this cycle.

In addition to the above, Sujith Manoharan reverts an earlier ath9k
patch.  The earlier change was found to allow for the device to sleep
too long and miss beacons.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents a7f8289d ae0fd635
......@@ -57,7 +57,7 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
struct ath9k_beacon_state *bs)
{
struct ath_common *common = ath9k_hw_common(ah);
int dtim_intval, sleepduration;
int dtim_intval;
u64 tsf;
/* No need to configure beacon if we are not associated */
......@@ -75,7 +75,6 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
* last beacon we received (which may be none).
*/
dtim_intval = conf->intval * conf->dtim_period;
sleepduration = ah->hw->conf.listen_interval * conf->intval;
/*
* Pull nexttbtt forward to reflect the current
......@@ -113,7 +112,7 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
*/
bs->bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
sleepduration));
conf->intval));
if (bs->bs_sleepduration > bs->bs_dtimperiod)
bs->bs_sleepduration = bs->bs_dtimperiod;
......
......@@ -40,7 +40,7 @@
#include "commands.h"
#include "power.h"
static bool force_cam;
static bool force_cam = true;
module_param(force_cam, bool, 0644);
MODULE_PARM_DESC(force_cam, "force continuously aware mode (no power saving at all)");
......
......@@ -83,6 +83,8 @@
#define IWL7260_TX_POWER_VERSION 0xffff /* meaningless */
#define IWL3160_NVM_VERSION 0x709
#define IWL3160_TX_POWER_VERSION 0xffff /* meaningless */
#define IWL3165_NVM_VERSION 0x709
#define IWL3165_TX_POWER_VERSION 0xffff /* meaningless */
#define IWL7265_NVM_VERSION 0x0a1d
#define IWL7265_TX_POWER_VERSION 0xffff /* meaningless */
......@@ -92,6 +94,9 @@
#define IWL3160_FW_PRE "iwlwifi-3160-"
#define IWL3160_MODULE_FIRMWARE(api) IWL3160_FW_PRE __stringify(api) ".ucode"
#define IWL3165_FW_PRE "iwlwifi-3165-"
#define IWL3165_MODULE_FIRMWARE(api) IWL3165_FW_PRE __stringify(api) ".ucode"
#define IWL7265_FW_PRE "iwlwifi-7265-"
#define IWL7265_MODULE_FIRMWARE(api) IWL7265_FW_PRE __stringify(api) ".ucode"
......@@ -213,6 +218,16 @@ static const struct iwl_pwr_tx_backoff iwl7265_pwr_tx_backoffs[] = {
{0},
};
const struct iwl_cfg iwl3165_2ac_cfg = {
.name = "Intel(R) Dual Band Wireless AC 3165",
.fw_name_pre = IWL3165_FW_PRE,
IWL_DEVICE_7000,
.ht_params = &iwl7000_ht_params,
.nvm_ver = IWL3165_NVM_VERSION,
.nvm_calib_ver = IWL3165_TX_POWER_VERSION,
.pwr_tx_backoffs = iwl7265_pwr_tx_backoffs,
};
const struct iwl_cfg iwl7265_2ac_cfg = {
.name = "Intel(R) Dual Band Wireless AC 7265",
.fw_name_pre = IWL7265_FW_PRE,
......@@ -245,4 +260,5 @@ const struct iwl_cfg iwl7265_n_cfg = {
MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL3160_UCODE_API_OK));
MODULE_FIRMWARE(IWL3165_MODULE_FIRMWARE(IWL3160_UCODE_API_OK));
MODULE_FIRMWARE(IWL7265_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
......@@ -120,6 +120,8 @@ enum iwl_led_mode {
#define IWL_LONG_WD_TIMEOUT 10000
#define IWL_MAX_WD_TIMEOUT 120000
#define IWL_DEFAULT_MAX_TX_POWER 22
/* Antenna presence definitions */
#define ANT_NONE 0x0
#define ANT_A BIT(0)
......@@ -335,6 +337,7 @@ extern const struct iwl_cfg iwl7260_n_cfg;
extern const struct iwl_cfg iwl3160_2ac_cfg;
extern const struct iwl_cfg iwl3160_2n_cfg;
extern const struct iwl_cfg iwl3160_n_cfg;
extern const struct iwl_cfg iwl3165_2ac_cfg;
extern const struct iwl_cfg iwl7265_2ac_cfg;
extern const struct iwl_cfg iwl7265_2n_cfg;
extern const struct iwl_cfg iwl7265_n_cfg;
......
......@@ -146,8 +146,6 @@ static const u8 iwl_nvm_channels_family_8000[] = {
#define LAST_2GHZ_HT_PLUS 9
#define LAST_5GHZ_HT 161
#define DEFAULT_MAX_TX_POWER 16
/* rate data (static) */
static struct ieee80211_rate iwl_cfg80211_rates[] = {
{ .bitrate = 1 * 10, .hw_value = 0, .hw_value_short = 0, },
......@@ -295,7 +293,7 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
* Default value - highest tx power value. max_power
* is not used in mvm, and is used for backwards compatibility
*/
channel->max_power = DEFAULT_MAX_TX_POWER;
channel->max_power = IWL_DEFAULT_MAX_TX_POWER;
is_5ghz = channel->band == IEEE80211_BAND_5GHZ;
IWL_DEBUG_EEPROM(dev,
"Ch. %d [%sGHz] %s%s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
......
......@@ -585,8 +585,6 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm)
lockdep_assert_held(&mvm->mutex);
if (unlikely(mvm->bt_force_ant_mode != BT_FORCE_ANT_DIS)) {
u32 mode;
switch (mvm->bt_force_ant_mode) {
case BT_FORCE_ANT_BT:
mode = BT_COEX_BT;
......@@ -756,7 +754,8 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
struct iwl_bt_iterator_data *data = _data;
struct iwl_mvm *mvm = data->mvm;
struct ieee80211_chanctx_conf *chanctx_conf;
enum ieee80211_smps_mode smps_mode;
/* default smps_mode is AUTOMATIC - only used for client modes */
enum ieee80211_smps_mode smps_mode = IEEE80211_SMPS_AUTOMATIC;
u32 bt_activity_grading;
int ave_rssi;
......@@ -764,8 +763,6 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
switch (vif->type) {
case NL80211_IFTYPE_STATION:
/* default smps_mode for BSS / P2P client is AUTOMATIC */
smps_mode = IEEE80211_SMPS_AUTOMATIC;
break;
case NL80211_IFTYPE_AP:
if (!mvmvif->ap_ibss_active)
......@@ -797,7 +794,7 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
else if (bt_activity_grading >= BT_LOW_TRAFFIC)
smps_mode = IEEE80211_SMPS_DYNAMIC;
/* relax SMPS contraints for next association */
/* relax SMPS constraints for next association */
if (!vif->bss_conf.assoc)
smps_mode = IEEE80211_SMPS_AUTOMATIC;
......
......@@ -74,8 +74,7 @@ static void iwl_dbgfs_update_pm(struct iwl_mvm *mvm,
switch (param) {
case MVM_DEBUGFS_PM_KEEP_ALIVE: {
struct ieee80211_hw *hw = mvm->hw;
int dtimper = hw->conf.ps_dtim_period ?: 1;
int dtimper = vif->bss_conf.dtim_period ?: 1;
int dtimper_msec = dtimper * vif->bss_conf.beacon_int;
IWL_DEBUG_POWER(mvm, "debugfs: set keep_alive= %d sec\n", val);
......
......@@ -1563,14 +1563,14 @@ enum iwl_sf_scenario {
/**
* Smart Fifo configuration command.
* @state: smart fifo state, types listed in iwl_sf_sate.
* @state: smart fifo state, types listed in enum %iwl_sf_sate.
* @watermark: Minimum allowed availabe free space in RXF for transient state.
* @long_delay_timeouts: aging and idle timer values for each scenario
* in long delay state.
* @full_on_timeouts: timer values for each scenario in full on state.
*/
struct iwl_sf_cfg_cmd {
enum iwl_sf_state state;
__le32 state;
__le32 watermark[SF_TRANSIENT_STATES_NUMBER];
__le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
__le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
......
......@@ -721,11 +721,6 @@ static int iwl_mvm_mac_ctxt_cmd_sta(struct iwl_mvm *mvm,
!force_assoc_off) {
u32 dtim_offs;
/* Allow beacons to pass through as long as we are not
* associated, or we do not have dtim period information.
*/
cmd.filter_flags |= cpu_to_le32(MAC_FILTER_IN_BEACON);
/*
* The DTIM count counts down, so when it is N that means N
* more beacon intervals happen until the DTIM TBTT. Therefore
......@@ -759,6 +754,11 @@ static int iwl_mvm_mac_ctxt_cmd_sta(struct iwl_mvm *mvm,
ctxt_sta->is_assoc = cpu_to_le32(1);
} else {
ctxt_sta->is_assoc = cpu_to_le32(0);
/* Allow beacons to pass through as long as we are not
* associated, or we do not have dtim period information.
*/
cmd.filter_flags |= cpu_to_le32(MAC_FILTER_IN_BEACON);
}
ctxt_sta->bi = cpu_to_le32(vif->bss_conf.beacon_int);
......
......@@ -396,12 +396,14 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
else
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
/* TODO: enable that only for firmwares that don't crash */
/* hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; */
if (IWL_UCODE_API(mvm->fw->ucode_ver) >= 10) {
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
hw->wiphy->max_sched_scan_ssids = PROBE_OPTION_MAX;
hw->wiphy->max_match_sets = IWL_SCAN_MAX_PROFILES;
/* we create the 802.11 header and zero length SSID IE. */
hw->wiphy->max_sched_scan_ie_len = SCAN_OFFLOAD_PROBE_REQ_SIZE - 24 - 2;
hw->wiphy->max_sched_scan_ie_len =
SCAN_OFFLOAD_PROBE_REQ_SIZE - 24 - 2;
}
hw->wiphy->features |= NL80211_FEATURE_P2P_GO_CTWIN |
NL80211_FEATURE_LOW_PRIORITY_SCAN |
......@@ -1524,11 +1526,6 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
*/
iwl_mvm_remove_time_event(mvm, mvmvif,
&mvmvif->time_event_data);
} else if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS |
BSS_CHANGED_QOS)) {
ret = iwl_mvm_power_update_mac(mvm);
if (ret)
IWL_ERR(mvm, "failed to update power mode\n");
}
if (changes & BSS_CHANGED_BEACON_INFO) {
......@@ -1536,6 +1533,12 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
WARN_ON(iwl_mvm_enable_beacon_filter(mvm, vif, 0));
}
if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS | BSS_CHANGED_QOS)) {
ret = iwl_mvm_power_update_mac(mvm);
if (ret)
IWL_ERR(mvm, "failed to update power mode\n");
}
if (changes & BSS_CHANGED_TXPOWER) {
IWL_DEBUG_CALIB(mvm, "Changing TX Power to %d\n",
bss_conf->txpower);
......
......@@ -281,7 +281,6 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
struct ieee80211_vif *vif,
struct iwl_mac_power_cmd *cmd)
{
struct ieee80211_hw *hw = mvm->hw;
struct ieee80211_chanctx_conf *chanctx_conf;
struct ieee80211_channel *chan;
int dtimper, dtimper_msec;
......@@ -292,7 +291,7 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id,
mvmvif->color));
dtimper = hw->conf.ps_dtim_period ?: 1;
dtimper = vif->bss_conf.dtim_period;
/*
* Regardless of power management state the driver must set
......@@ -885,7 +884,7 @@ int iwl_mvm_update_d0i3_power_mode(struct iwl_mvm *mvm,
iwl_mvm_power_build_cmd(mvm, vif, &cmd);
if (enable) {
/* configure skip over dtim up to 300 msec */
int dtimper = mvm->hw->conf.ps_dtim_period ?: 1;
int dtimper = vif->bss_conf.dtim_period ?: 1;
int dtimper_msec = dtimper * vif->bss_conf.beacon_int;
if (WARN_ON(!dtimper_msec))
......
......@@ -149,13 +149,13 @@ static void iwl_mvm_get_signal_strength(struct iwl_mvm *mvm,
le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_ENERGY_ANT_ABC_IDX]);
energy_a = (val & IWL_RX_INFO_ENERGY_ANT_A_MSK) >>
IWL_RX_INFO_ENERGY_ANT_A_POS;
energy_a = energy_a ? -energy_a : -256;
energy_a = energy_a ? -energy_a : S8_MIN;
energy_b = (val & IWL_RX_INFO_ENERGY_ANT_B_MSK) >>
IWL_RX_INFO_ENERGY_ANT_B_POS;
energy_b = energy_b ? -energy_b : -256;
energy_b = energy_b ? -energy_b : S8_MIN;
energy_c = (val & IWL_RX_INFO_ENERGY_ANT_C_MSK) >>
IWL_RX_INFO_ENERGY_ANT_C_POS;
energy_c = energy_c ? -energy_c : -256;
energy_c = energy_c ? -energy_c : S8_MIN;
max_energy = max(energy_a, energy_b);
max_energy = max(max_energy, energy_c);
......
......@@ -172,7 +172,7 @@ static int iwl_mvm_sf_config(struct iwl_mvm *mvm, u8 sta_id,
enum iwl_sf_state new_state)
{
struct iwl_sf_cfg_cmd sf_cmd = {
.state = new_state,
.state = cpu_to_le32(new_state),
};
struct ieee80211_sta *sta;
int ret = 0;
......
......@@ -168,10 +168,14 @@ static void iwl_mvm_set_tx_cmd_rate(struct iwl_mvm *mvm,
/*
* for data packets, rate info comes from the table inside the fw. This
* table is controlled by LINK_QUALITY commands
* table is controlled by LINK_QUALITY commands. Exclude ctrl port
* frames like EAPOLs which should be treated as mgmt frames. This
* avoids them being sent initially in high rates which increases the
* chances for completion of the 4-Way handshake.
*/
if (ieee80211_is_data(fc) && sta) {
if (ieee80211_is_data(fc) && sta &&
!(info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)) {
tx_cmd->initial_rate_index = 0;
tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_STA_RATE);
return;
......
......@@ -352,11 +352,17 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
{IWL_PCI_DEVICE(0x08B3, 0x8060, iwl3160_2n_cfg)},
{IWL_PCI_DEVICE(0x08B3, 0x8062, iwl3160_n_cfg)},
{IWL_PCI_DEVICE(0x08B4, 0x8270, iwl3160_2ac_cfg)},
{IWL_PCI_DEVICE(0x08B4, 0x8370, iwl3160_2ac_cfg)},
{IWL_PCI_DEVICE(0x08B4, 0x8272, iwl3160_2ac_cfg)},
{IWL_PCI_DEVICE(0x08B3, 0x8470, iwl3160_2ac_cfg)},
{IWL_PCI_DEVICE(0x08B3, 0x8570, iwl3160_2ac_cfg)},
{IWL_PCI_DEVICE(0x08B3, 0x1070, iwl3160_2ac_cfg)},
{IWL_PCI_DEVICE(0x08B3, 0x1170, iwl3160_2ac_cfg)},
/* 3165 Series */
{IWL_PCI_DEVICE(0x3165, 0x4010, iwl3165_2ac_cfg)},
{IWL_PCI_DEVICE(0x3165, 0x4210, iwl3165_2ac_cfg)},
/* 7265 Series */
{IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5110, iwl7265_2ac_cfg)},
......@@ -378,6 +384,7 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
{IWL_PCI_DEVICE(0x095B, 0x5202, iwl7265_n_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9010, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9012, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x900A, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)},
......
......@@ -1822,7 +1822,7 @@ void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE;
if (sdata->vif.bss_conf.use_short_slot)
sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME;
sinfo->bss_param.dtim_period = sdata->local->hw.conf.ps_dtim_period;
sinfo->bss_param.dtim_period = sdata->vif.bss_conf.dtim_period;
sinfo->bss_param.beacon_interval = sdata->vif.bss_conf.beacon_int;
sinfo->sta_flags.set = 0;
......
......@@ -6969,6 +6969,9 @@ void __cfg80211_send_event_skb(struct sk_buff *skb, gfp_t gfp)
struct nlattr *data = ((void **)skb->cb)[2];
enum nl80211_multicast_groups mcgrp = NL80211_MCGRP_TESTMODE;
/* clear CB data for netlink core to own from now on */
memset(skb->cb, 0, sizeof(skb->cb));
nla_nest_end(skb, data);
genlmsg_end(skb, hdr);
......@@ -9294,6 +9297,9 @@ int cfg80211_vendor_cmd_reply(struct sk_buff *skb)
void *hdr = ((void **)skb->cb)[1];
struct nlattr *data = ((void **)skb->cb)[2];
/* clear CB data for netlink core to own from now on */
memset(skb->cb, 0, sizeof(skb->cb));
if (WARN_ON(!rdev->cur_cmd_info)) {
kfree_skb(skb);
return -EINVAL;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment