Commit d027db13 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC updates from Olof Johansson:
 "This contains the bulk of new SoC development for this merge window.

  Two new platforms have been added, the sunxi platforms (Allwinner A1x
  SoCs) by Maxime Ripard, and a generic Broadcom platform for a new
  series of ARMv7 platforms from them, where the hope is that we can
  keep the platform code generic enough to have them all share one mach
  directory.  The new Broadcom platform is contributed by Christian
  Daudt.

  Highbank has grown support for Calxeda's next generation of hardware,
  ECX-2000.

  clps711x has seen a lot of cleanup from Alexander Shiyan, and he's
  also taken on maintainership of the platform.

  Beyond this there has been a bunch of work from a number of people on
  converting more platforms to IRQ domains, pinctrl conversion, cleanup
  and general feature enablement across most of the active platforms."

Fix up trivial conflicts as per Olof.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits)
  mfd: vexpress-sysreg: Remove LEDs code
  irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids
  clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids
  irq: versatile: delete dangling variable
  ARM: sunxi: add missing include for mdelay()
  ARM: EXYNOS: Avoid early use of of_machine_is_compatible()
  ARM: dts: add node for PL330 MDMA1 controller for exynos4
  ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412
  ARM: EXYNOS: add UART3 to DEBUG_LL ports
  ARM: S3C24XX: Add clkdev entry for camif-upll clock
  ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers
  ARM: sunxi: Add missing sun4i.dtsi file
  pinctrl: samsung: Do not initialise statics to 0
  ARM i.MX6: remove gate_mask from pllv3
  ARM i.MX6: Fix ethernet PLL clocks
  ARM i.MX6: rename PLLs according to datasheet
  ARM i.MX6: Add pwm support
  ARM i.MX51: Add pwm support
  ARM i.MX53: Add pwm support
  ARM: mx5: Replace clk_register_clkdev with clock DT lookup
  ...
parents d01e4afd 5faf7cbb
ARM Allwinner SoCs
==================
This document lists all the ARM Allwinner SoCs that are currently
supported in mainline by the Linux kernel. This document will also
provide links to documentation and or datasheet for these SoCs.
SunXi family
------------
Flavors:
Allwinner A10 (sun4i)
Datasheet : http://dl.linux-sunxi.org/A10/A10%20Datasheet%20-%20v1.21%20%282012-04-06%29.pdf
Allwinner A13 (sun5i)
Datasheet : http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
Core: Cortex A8
Linux kernel mach directory: arch/arm/mach-sunxi
\ No newline at end of file
Broadcom BCM11351 device tree bindings
-------------------------------------------
Boards with the bcm281xx SoC family (which includes bcm11130, bcm11140,
bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties:
Required root node property:
compatible = "bcm,bcm11351";
Calxeda Highbank Platforms Device Tree Bindings
Calxeda Platforms Device Tree Bindings
-----------------------------------------------
Boards with Calxeda Cortex-A9 based Highbank SOC shall have the following
properties.
Boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC shall have the
following properties.
Required root node properties:
- compatible = "calxeda,highbank";
Boards with Calxeda Cortex-A15 based ECX-2000 SOC shall have the following
properties.
Required root node properties:
- compatible = "calxeda,ecx-2000";
ARM Versatile Express system registers
--------------------------------------
This is a system control registers block, providing multiple low level
platform functions like board detection and identification, software
interrupt generation, MMC and NOR Flash control etc.
Required node properties:
- compatible value : = "arm,vexpress,sysreg";
- reg : physical base address and the size of the registers window
- gpio-controller : specifies that the node is a GPIO controller
- #gpio-cells : size of the GPIO specifier, should be 2:
- first cell is the pseudo-GPIO line number:
0 - MMC CARDIN
1 - MMC WPROT
2 - NOR FLASH WPn
- second cell can take standard GPIO flags (currently ignored).
Example:
v2m_sysreg: sysreg@10000000 {
compatible = "arm,vexpress-sysreg";
reg = <0x10000000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
This block also can also act a bridge to the platform's configuration
bus via "system control" interface, addressing devices with site number,
position in the board stack, config controller, function and device
numbers - see motherboard's TRM for more details.
The node describing a config device must refer to the sysreg node via
"arm,vexpress,config-bridge" phandle (can be also defined in the node's
parent) and relies on the board topology properties - see main vexpress
node documentation for more details. It must must also define the
following property:
- arm,vexpress-sysreg,func : must contain two cells:
- first cell defines function number (eg. 1 for clock generator,
2 for voltage regulators etc.)
- device number (eg. osc 0, osc 1 etc.)
Example:
mcc {
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
};
};
......@@ -11,6 +11,10 @@ the motherboard file using a /include/ directive. As the motherboard
can be initialized in one of two different configurations ("memory
maps"), care must be taken to include the correct one.
Root node
---------
Required properties in the root node:
- compatible value:
compatible = "arm,vexpress,<model>", "arm,vexpress";
......@@ -45,6 +49,10 @@ Optional properties in the root node:
- Coretile Express A9x4 (V2P-CA9) HBI-0225:
arm,hbi = <0x225>;
CPU nodes
---------
Top-level standard "cpus" node is required. It must contain a node
with device_type = "cpu" property for every available core, eg.:
......@@ -59,6 +67,52 @@ with device_type = "cpu" property for every available core, eg.:
};
};
Configuration infrastructure
----------------------------
The platform has an elaborated configuration system, consisting of
microcontrollers residing on the mother- and daughterboards known
as Motherboard/Daughterboard Configuration Controller (MCC and DCC).
The controllers are responsible for the platform initialization
(reset generation, flash programming, FPGA bitfiles loading etc.)
but also control clock generators, voltage regulators, gather
environmental data like temperature, power consumption etc. Even
the video output switch (FPGA) is controlled that way.
Nodes describing devices controlled by this infrastructure should
point at the bridge device node:
- bridge phandle:
arm,vexpress,config-bridge = <phandle>;
This property can be also defined in a parent node (eg. for a DCC)
and is effective for all children.
Platform topology
-----------------
As Versatile Express can be configured in number of physically
different setups, the device tree should describe platform topology.
Root node and main motherboard node must define the following
property, describing physical location of the children nodes:
- site number:
arm,vexpress,site = <number>;
where 0 means motherboard, 1 or 2 are daugtherboard sites,
0xf means "master" site (site containing main CPU tile)
- when daughterboards are stacked on one site, their position
in the stack be be described with:
arm,vexpress,position = <number>;
- when describing tiles consisting more than one DCC, its number
can be described with:
arm,vexpress,dcc = <number>;
Any of the numbers above defaults to zero if not defined in
the node or any of its parent.
Motherboard
-----------
The motherboard description file provides a single "motherboard" node
using 2 address cells corresponding to the Static Memory Bus used
between the motherboard and the tile. The first cell defines the Chip
......@@ -87,22 +141,30 @@ can be used to obtain required phandle in the tile's "aliases" node:
- SP804 timers:
v2m_timer01 and v2m_timer23
Current Linux implementation requires a "arm,v2m_timer" alias
pointing at one of the motherboard's SP804 timers, if it is to be
used as the system timer. This alias should be defined in the
motherboard files.
The tile description should define a "smb" node, describing the
Static Memory Bus between the tile and motherboard. It must define
the following properties:
- "simple-bus" compatible value (to ensure creation of the children)
compatible = "simple-bus";
- mapping of the SMB CS/offset addresses into main address space:
#address-cells = <2>;
#size-cells = <1>;
ranges = <...>;
- interrupts mapping:
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <...>;
The tile description must define "ranges", "interrupt-map-mask" and
"interrupt-map" properties to translate the motherboard's address
and interrupt space into one used by the tile's processor.
Abbreviated example:
Example of a VE tile description (simplified)
---------------------------------------------
/dts-v1/;
/ {
model = "V2P-CA5s";
arm,hbi = <0x225>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <1>;
......@@ -134,13 +196,29 @@ Abbreviated example:
<0x2c000100 0x100>;
};
motherboard {
dcc {
compatible = "simple-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
compatible = "arm,vexpress-osc";
};
};
smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
/* CS0 is visible at 0x08000000 */
ranges = <0 0 0x08000000 0x04000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
/* Active high IRQ 0 is connected to GIC's SPI0 */
interrupt-map = <0 0 0 &gic 0 0 4>;
/include/ "vexpress-v2m-rs1.dtsi"
};
};
/include/ "vexpress-v2m-rs1.dtsi"
* Clock bindings for Freescale i.MX5
Required properties:
- compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53
- reg: Address and length of the register set
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. The following is a full list of i.MX5
clocks and IDs.
Clock ID
---------------------------
dummy 0
ckil 1
osc 2
ckih1 3
ckih2 4
ahb 5
ipg 6
axi_a 7
axi_b 8
uart_pred 9
uart_root 10
esdhc_a_pred 11
esdhc_b_pred 12
esdhc_c_s 13
esdhc_d_s 14
emi_sel 15
emi_slow_podf 16
nfc_podf 17
ecspi_pred 18
ecspi_podf 19
usboh3_pred 20
usboh3_podf 21
usb_phy_pred 22
usb_phy_podf 23
cpu_podf 24
di_pred 25
tve_di 26
tve_s 27
uart1_ipg_gate 28
uart1_per_gate 29
uart2_ipg_gate 30
uart2_per_gate 31
uart3_ipg_gate 32
uart3_per_gate 33
i2c1_gate 34
i2c2_gate 35
gpt_ipg_gate 36
pwm1_ipg_gate 37
pwm1_hf_gate 38
pwm2_ipg_gate 39
pwm2_hf_gate 40
gpt_hf_gate 41
fec_gate 42
usboh3_per_gate 43
esdhc1_ipg_gate 44
esdhc2_ipg_gate 45
esdhc3_ipg_gate 46
esdhc4_ipg_gate 47
ssi1_ipg_gate 48
ssi2_ipg_gate 49
ssi3_ipg_gate 50
ecspi1_ipg_gate 51
ecspi1_per_gate 52
ecspi2_ipg_gate 53
ecspi2_per_gate 54
cspi_ipg_gate 55
sdma_gate 56
emi_slow_gate 57
ipu_s 58
ipu_gate 59
nfc_gate 60
ipu_di1_gate 61
vpu_s 62
vpu_gate 63
vpu_reference_gate 64
uart4_ipg_gate 65
uart4_per_gate 66
uart5_ipg_gate 67
uart5_per_gate 68
tve_gate 69
tve_pred 70
esdhc1_per_gate 71
esdhc2_per_gate 72
esdhc3_per_gate 73
esdhc4_per_gate 74
usb_phy_gate 75
hsi2c_gate 76
mipi_hsc1_gate 77
mipi_hsc2_gate 78
mipi_esc_gate 79
mipi_hsp_gate 80
ldb_di1_div_3_5 81
ldb_di1_div 82
ldb_di0_div_3_5 83
ldb_di0_div 84
ldb_di1_gate 85
can2_serial_gate 86
can2_ipg_gate 87
i2c3_gate 88
lp_apm 89
periph_apm 90
main_bus 91
ahb_max 92
aips_tz1 93
aips_tz2 94
tmax1 95
tmax2 96
tmax3 97
spba 98
uart_sel 99
esdhc_a_sel 100
esdhc_b_sel 101
esdhc_a_podf 102
esdhc_b_podf 103
ecspi_sel 104
usboh3_sel 105
usb_phy_sel 106
iim_gate 107
usboh3_gate 108
emi_fast_gate 109
ipu_di0_gate 110
gpc_dvfs 111
pll1_sw 112
pll2_sw 113
pll3_sw 114
ipu_di0_sel 115
ipu_di1_sel 116
tve_ext_sel 117
mx51_mipi 118
pll4_sw 119
ldb_di1_sel 120
di_pll4_podf 121
ldb_di0_sel 122
ldb_di0_gate 123
usb_phy1_gate 124
usb_phy2_gate 125
per_lp_apm 126
per_pred1 127
per_pred2 128
per_podf 129
per_root 130
ssi_apm 131
ssi1_root_sel 132
ssi2_root_sel 133
ssi3_root_sel 134
ssi_ext1_sel 135
ssi_ext2_sel 136
ssi_ext1_com_sel 137
ssi_ext2_com_sel 138
ssi1_root_pred 139
ssi1_root_podf 140
ssi2_root_pred 141
ssi2_root_podf 142
ssi_ext1_pred 143
ssi_ext1_podf 144
ssi_ext2_pred 145
ssi_ext2_podf 146
ssi1_root_gate 147
ssi2_root_gate 148
ssi3_root_gate 149
ssi_ext1_gate 150
ssi_ext2_gate 151
epit1_ipg_gate 152
epit1_hf_gate 153
epit2_ipg_gate 154
epit2_hf_gate 155
can_sel 156
can1_serial_gate 157
can1_ipg_gate 158
Examples (for mx53):
clks: ccm@53fd4000{
compatible = "fsl,imx53-ccm";
reg = <0x53fd4000 0x4000>;
interrupts = <0 71 0x04 0 72 0x04>;
#clock-cells = <1>;
};
can1: can@53fc8000 {
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
clocks = <&clks 158>, <&clks 157>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -187,9 +187,9 @@ clocks and IDs.
pll3_usb_otg 172
pll4_audio 173
pll5_video 174
pll6_mlb 175
pll8_mlb 175
pll7_usb_host 176
pll8_enet 177
pll6_enet 177
ssi1_ipg 178
ssi2_ipg 179
ssi3_ipg 180
......@@ -198,6 +198,11 @@ clocks and IDs.
usbphy2 183
ldb_di0_div_3_5 184
ldb_di1_div_3_5 185
sata_ref 186
sata_ref_100m 187
pcie_ref 188
pcie_ref_125m 189
enet_ref 190
Examples:
......
Allwinner Sunxi Interrupt Controller
Required properties:
- compatible : should be "allwinner,sunxi-ic"
- reg : Specifies base physical address and size of the registers.
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value shall be 1.
The interrupt sources are as follows:
0: ENMI
1: UART0
2: UART1
3: UART2
4: UART3
5: IR0
6: IR1
7: I2C0
8: I2C1
9: I2C2
10: SPI0
11: SPI1
12: SPI2
13: SPDIF
14: AC97
15: TS
16: I2S
17: UART4
18: UART5
19: UART6
20: UART7
21: KEYPAD
22: TIMER0
23: TIMER1
24: TIMER2
25: TIMER3
26: CAN
27: DMA
28: PIO
29: TOUCH_PANEL
30: AUDIO_CODEC
31: LRADC
32: SDMC0
33: SDMC1
34: SDMC2
35: SDMC3
36: MEMSTICK
37: NAND
38: USB0
39: USB1
40: USB2
41: SCR
42: CSI0
43: CSI1
44: LCDCTRL0
45: LCDCTRL1
46: MP
47: DEFEBE0
48: DEFEBE1
49: PMU
50: SPI3
51: TZASC
52: PATA
53: VE
54: SS
55: EMAC
56: SATA
57: GPS
58: HDMI
59: TVE
60: ACE
61: TVD
62: PS2_0
63: PS2_1
64: USB3
65: USB4
66: PLE_PFM
67: TIMER4
68: TIMER5
69: GPU_GP
70: GPU_GPMMU
71: GPU_PP0
72: GPU_PPMMU0
73: GPU_PMU
74: GPU_RSV0
75: GPU_RSV1
76: GPU_RSV2
77: GPU_RSV3
78: GPU_RSV4
79: GPU_RSV5
80: GPU_RSV6
82: SYNC_TIMER0
83: SYNC_TIMER1
Example:
intc: interrupt-controller {
compatible = "allwinner,sunxi-ic";
reg = <0x01c20400 0x400>;
interrupt-controller;
#interrupt-cells = <2>;
};
......@@ -8,13 +8,20 @@ on-chip controllers onto these pads.
Required Properties:
- compatible: should be one of the following.
- "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller.
- "samsung,pinctrl-exynos4x12": for Exynos4x12 compatible pin-controller.
- "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller.
- reg: Base address of the pin controller hardware module and length of
the address space it occupies.
- interrupts: interrupt specifier for the controller. The format and value of
the interrupt specifier depends on the interrupt parent for the controller.
- Pin banks as child nodes: Pin banks of the controller are represented by child
nodes of the controller node. Bank name is taken from name of the node. Each
bank node must contain following properties:
- gpio-controller: identifies the node as a gpio controller and pin bank.
- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
binding is used, the amount of cells must be specified as 2. See generic
GPIO binding documentation for description of particular cells.
- Pin mux/config groups as child nodes: The pin mux (selecting pin function
mode) and pin config (pull up/down, driver strength) settings are represented
......@@ -72,16 +79,24 @@ used as system wakeup events.
A. External GPIO Interrupts: For supporting external gpio interrupts, the
following properties should be specified in the pin-controller device node.
- interrupt-controller: identifies the controller node as interrupt-parent.
- #interrupt-cells: the value of this property should be 2.
- First Cell: represents the external gpio interrupt number local to the
external gpio interrupt space of the controller.
- Second Cell: flags to identify the type of the interrupt
- 1 = rising edge triggered
- 2 = falling edge triggered
- 3 = rising and falling edge triggered
- 4 = high level triggered
- 8 = low level triggered
- interrupt-parent: phandle of the interrupt parent to which the external
GPIO interrupts are forwarded to.
- interrupts: interrupt specifier for the controller. The format and value of
the interrupt specifier depends on the interrupt parent for the controller.
In addition, following properties must be present in node of every bank
of pins supporting GPIO interrupts:
- interrupt-controller: identifies the controller node as interrupt-parent.
- #interrupt-cells: the value of this property should be 2.
- First Cell: represents the external gpio interrupt number local to the
external gpio interrupt space of the controller.
- Second Cell: flags to identify the type of the interrupt
- 1 = rising edge triggered
- 2 = falling edge triggered
- 3 = rising and falling edge triggered
- 4 = high level triggered
- 8 = low level triggered
B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
child node representing the external wakeup interrupt controller should be
......@@ -94,6 +109,11 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
found on Samsung Exynos4210 SoC.
- interrupt-parent: phandle of the interrupt parent to which the external
wakeup interrupts are forwarded to.
- interrupts: interrupt used by multiplexed wakeup interrupts.
In addition, following properties must be present in node of every bank
of pins supporting wake-up interrupts:
- interrupt-controller: identifies the node as interrupt-parent.
- #interrupt-cells: the value of this property should be 2
- First Cell: represents the external wakeup interrupt number local to
......@@ -105,11 +125,63 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
- 4 = high level triggered
- 8 = low level triggered
Node of every bank of pins supporting direct wake-up interrupts (without
multiplexing) must contain following properties:
- interrupt-parent: phandle of the interrupt parent to which the external
wakeup interrupts are forwarded to.
- interrupts: interrupts of the interrupt parent which are used for external
wakeup interrupts from pins of the bank, must contain interrupts for all
pins of the bank.
Aliases:
All the pin controller nodes should be represented in the aliases node using
the following format 'pinctrl{n}' where n is a unique number for the alias.
Example: A pin-controller node with pin banks:
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
/* ... */
/* Pin bank without external interrupts */
gpy0: gpy0 {
gpio-controller;
#gpio-cells = <2>;
};
/* ... */
/* Pin bank with external GPIO or muxed wake-up interrupts */
gpj0: gpj0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
/* ... */
/* Pin bank with external direct wake-up interrupts */
gpx0: gpx0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
#interrupt-cells = <2>;
};
/* ... */
};
Example 1: A pin-controller node with pin groups.
pinctrl_0: pinctrl@11400000 {
......@@ -117,6 +189,8 @@ Example 1: A pin-controller node with pin groups.
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
/* ... */
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <2>;
......@@ -158,20 +232,14 @@ Example 2: A pin-controller node with external wakeup interrupt controller node.
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11000000 0x1000>;
interrupts = <0 46 0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 46 0>
wakup_eint: wakeup-interrupt-controller {
/* ... */
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
<0 32 0>;
interrupts = <0 32 0>;
};
};
......@@ -190,7 +258,8 @@ Example 4: Set up the default pin state for uart controller.
static int s3c24xx_serial_probe(struct platform_device *pdev) {
struct pinctrl *pinctrl;
...
...
/* ... */
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
}
Allwinner A1X SoCs Timer Controller
Required properties:
- compatible : should be "allwinner,sunxi-timer"
- reg : Specifies base physical address and size of the registers.
- interrupts : The interrupt of the first timer
- clocks: phandle to the source clock (usually a 24 MHz fixed clock)
Example:
timer {
compatible = "allwinner,sunxi-timer";
reg = <0x01c20c00 0x400>;
interrupts = <22>;
clocks = <&osc>;
};
BCM2835 Watchdog timer
Required properties:
- compatible : should be "brcm,bcm2835-pm-wdt"
- reg : Specifies base physical address and size of the registers.
Example:
watchdog {
compatible = "brcm,bcm2835-pm-wdt";
reg = <0x7e100000 0x28>;
};
Allwinner sunXi Watchdog timer
Required properties:
- compatible : should be "allwinner,sunxi-wdt"
- reg : Specifies base physical address and size of the registers.
Example:
wdt: watchdog@01c20c90 {
compatible = "allwinner,sunxi-wdt";
reg = <0x01c20c90 0x10>;
};
......@@ -685,6 +685,12 @@ M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
ARM/Allwinner A1X SoC support
M: Maxime Ripard <maxime.ripard@free-electrons.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-sunxi/
ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
M: Andrew Victor <linux@maxim.org.za>
M: Nicolas Ferre <nicolas.ferre@atmel.com>
......@@ -707,6 +713,12 @@ S: Maintained
F: arch/arm/mach-cns3xxx/
T: git git://git.infradead.org/users/cbou/linux-cns3xxx.git
ARM/CIRRUS LOGIC CLPS711X ARM ARCHITECTURE
M: Alexander Shiyan <shc_work@mail.ru>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Odd Fixes
F: arch/arm/mach-clps711x/
ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
M: Hartley Sweeten <hsweeten@visionengravers.com>
M: Ryan Mallon <rmallon@gmail.com>
......
......@@ -286,8 +286,8 @@ config ARCH_INTEGRATOR
select MULTI_IRQ_HANDLER
select NEED_MACH_MEMORY_H
select PLAT_VERSATILE
select PLAT_VERSATILE_FPGA_IRQ
select SPARSE_IRQ
select VERSATILE_FPGA_IRQ
help
Support for ARM's Integrator platform.
......@@ -320,7 +320,7 @@ config ARCH_VERSATILE
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_FPGA_IRQ
select VERSATILE_FPGA_IRQ
help
This enables support for ARM Ltd Versatile board.
......@@ -340,7 +340,7 @@ config ARCH_AT91
config ARCH_BCM2835
bool "Broadcom BCM2835 family"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_411920
select ARM_TIMER_SP804
......@@ -348,7 +348,10 @@ config ARCH_BCM2835
select COMMON_CLK
select CPU_V6
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select MULTI_IRQ_HANDLER
select PINCTRL
select PINCTRL_BCM2835
select SPARSE_IRQ
select USE_OF
help
......@@ -370,10 +373,14 @@ config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
select AUTO_ZRELADDR
select CLKDEV_LOOKUP
select COMMON_CLK
select CPU_ARM720T
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select NEED_MACH_MEMORY_H
select SPARSE_IRQ
help
Support for Cirrus Logic 711x/721x/731x based boards.
......@@ -1015,6 +1022,8 @@ source "arch/arm/mach-mvebu/Kconfig"
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-bcm/Kconfig"
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-cns3xxx/Kconfig"
......@@ -1106,6 +1115,8 @@ source "arch/arm/mach-exynos/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
source "arch/arm/mach-sunxi/Kconfig"
source "arch/arm/mach-prima2/Kconfig"
source "arch/arm/mach-tegra/Kconfig"
......
......@@ -338,6 +338,17 @@ choice
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART3
depends on PLAT_SAMSUNG && ARCH_EXYNOS
bool "Use S3C UART 3 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 3. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_SOCFPGA_UART
depends on ARCH_SOCFPGA
bool "Use SOCFPGA UART for low-level debug"
......@@ -345,6 +356,20 @@ choice
Say Y here if you want kernel low-level debugging support
on SOCFPGA based platforms.
config DEBUG_SUNXI_UART0
bool "Kernel low-level debugging messages via sunXi UART0"
depends on ARCH_SUNXI
help
Say Y here if you want kernel low-level debugging support
on Allwinner A1X based platforms on the UART0.
config DEBUG_SUNXI_UART1
bool "Kernel low-level debugging messages via sunXi UART1"
depends on ARCH_SUNXI
help
Say Y here if you want kernel low-level debugging support
on Allwinner A1X based platforms on the UART1.
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
......@@ -424,6 +449,7 @@ config DEBUG_LL_INCLUDE
default "debug/mvebu.S" if DEBUG_MVEBU_UART
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
default "mach/debug-macro.S"
......
......@@ -138,6 +138,7 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) += at91
machine-$(CONFIG_ARCH_BCM) += bcm
machine-$(CONFIG_ARCH_BCM2835) += bcm2835
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
......@@ -194,6 +195,7 @@ machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx
machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx
machine-$(CONFIG_MACH_SPEAR600) += spear6xx
machine-$(CONFIG_ARCH_ZYNQ) += zynq
machine-$(CONFIG_ARCH_SUNXI) += sunxi
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
......
......@@ -45,11 +45,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y)
OBJS += head-shark.o ofw-shark.o
endif
ifeq ($(CONFIG_ARCH_P720T),y)
# Borrow this code from SA1100
OBJS += head-sa1100.o
endif
ifeq ($(CONFIG_ARCH_SA1100),y)
OBJS += head-sa1100.o
endif
......
......@@ -33,14 +33,17 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
dove-dove-db.dtb
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
exynos5250-smdk5250.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
exynos5250-smdk5250.dtb \
exynos5440-ssdk5440.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
ecx-2000.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
......@@ -102,6 +105,8 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
spear310-evb.dtb \
spear320-evb.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun4i-cubieboard.dtb \
sun5i-olinuxino.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
......
/*
* Copyright (C) 2012 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/include/ "bcm11351.dtsi"
/ {
model = "BCM11351 BRT board";
compatible = "bcm,bcm11351-brt", "bcm,bcm11351";
memory {
reg = <0x80000000 0x40000000>; /* 1 GB */
};
uart@3e000000 {
status = "okay";
};
};
/*
* Copyright (C) 2012 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/include/ "skeleton.dtsi"
/ {
model = "BCM11351 SoC";
compatible = "bcm,bcm11351";
interrupt-parent = <&gic>;
chosen {
bootargs = "console=ttyS0,115200n8";
};
gic: interrupt-controller@3ff00100 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x3ff01000 0x1000>,
<0x3ff00100 0x100>;
};
uart@3e000000 {
compatible = "bcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e000000 0x1000>;
clock-frequency = <13000000>;
interrupts = <0x0 67 0x4>;
reg-shift = <2>;
reg-io-width = <4>;
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0x3ff20000 0x1000>;
cache-unified;
cache-level = <2>;
};
};
......@@ -10,3 +10,18 @@ memory {
reg = <0 0x10000000>;
};
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&alt0 &alt3>;
alt0: alt0 {
brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 14 15 40 45>;
brcm,function = <4>; /* alt0 */
};
alt3: alt3 {
brcm,pins = <48 49 50 51 52 53>;
brcm,function = <7>; /* alt3 */
};
};
......@@ -29,11 +29,39 @@ intc: interrupt-controller {
#interrupt-cells = <2>;
};
watchdog {
compatible = "brcm,bcm2835-pm-wdt";
reg = <0x7e100000 0x28>;
};
uart@20201000 {
compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
reg = <0x7e201000 0x1000>;
interrupts = <2 25>;
clock-frequency = <3000000>;
};
gpio: gpio {
compatible = "brcm,bcm2835-gpio";
reg = <0x7e200000 0xb4>;
/*
* The GPIO IP block is designed for 3 banks of GPIOs.
* Each bank has a GPIO interrupt for itself.
* There is an overall "any bank" interrupt.
* In order, these are GIC interrupts 17, 18, 19, 20.
* Since the BCM2835 only has 2 banks, the 2nd bank
* interrupt output appears to be mirrored onto the
* 3rd bank's interrupt signal.
* So, a bank0 interrupt shows up on 17, 20, and
* a bank1 interrupt shows up on 18, 19, 20!
*/
interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
/*
* Copyright 2011-2012 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
/dts-v1/;
/* First 4KB has pen for secondary cores. */
/memreserve/ 0x00000000 0x0001000;
/ {
model = "Calxeda ECX-2000";
compatible = "calxeda,ecx-2000";
#address-cells = <2>;
#size-cells = <2>;
clock-ranges;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a15";
reg = <0>;
clocks = <&a9pll>;
clock-names = "cpu";
};
cpu@1 {
compatible = "arm,cortex-a15";
reg = <1>;
clocks = <&a9pll>;
clock-names = "cpu";
};
cpu@2 {
compatible = "arm,cortex-a15";
reg = <2>;
clocks = <&a9pll>;
clock-names = "cpu";
};
cpu@3 {
compatible = "arm,cortex-a15";
reg = <3>;
clocks = <&a9pll>;
clock-names = "cpu";
};
};
memory@0 {
name = "memory";
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0xff800000>;
};
memory@200000000 {
name = "memory";
device_type = "memory";
reg = <0x00000002 0x00000000 0x00000003 0x00000000>;
};
soc {
ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>;
timer {
compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
};
intc: interrupt-controller@fff11000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
#size-cells = <0>;
#address-cells = <1>;
interrupt-controller;
interrupts = <1 9 0xf04>;
reg = <0xfff11000 0x1000>,
<0xfff12000 0x1000>,
<0xfff14000 0x2000>,
<0xfff16000 0x2000>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
};
};
};
/include/ "ecx-common.dtsi"
/*
* Copyright 2011-2012 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
/ {
chosen {
bootargs = "console=ttyAMA0";
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
sata@ffe08000 {
compatible = "calxeda,hb-ahci";
reg = <0xffe08000 0x10000>;
interrupts = <0 83 4>;
dma-coherent;
calxeda,port-phys = <&combophy5 0 &combophy0 0
&combophy0 1 &combophy0 2
&combophy0 3>;
};
sdhci@ffe0e000 {
compatible = "calxeda,hb-sdhci";
reg = <0xffe0e000 0x1000>;
interrupts = <0 90 4>;
clocks = <&eclk>;
status = "disabled";
};
memory-controller@fff00000 {
compatible = "calxeda,hb-ddr-ctrl";
reg = <0xfff00000 0x1000>;
interrupts = <0 91 4>;
};
ipc@fff20000 {
compatible = "arm,pl320", "arm,primecell";
reg = <0xfff20000 0x1000>;
interrupts = <0 7 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpioe: gpio@fff30000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff30000 0x1000>;
interrupts = <0 14 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
status = "disabled";
};
gpiof: gpio@fff31000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff31000 0x1000>;
interrupts = <0 15 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
status = "disabled";
};
gpiog: gpio@fff32000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff32000 0x1000>;
interrupts = <0 16 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
status = "disabled";
};
gpioh: gpio@fff33000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff33000 0x1000>;
interrupts = <0 17 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
status = "disabled";
};
timer@fff34000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0xfff34000 0x1000>;
interrupts = <0 18 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
rtc@fff35000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0xfff35000 0x1000>;
interrupts = <0 19 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
serial@fff36000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xfff36000 0x1000>;
interrupts = <0 20 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
smic@fff3a000 {
compatible = "ipmi-smic";
device_type = "ipmi";
reg = <0xfff3a000 0x1000>;
interrupts = <0 24 4>;
reg-size = <4>;
reg-spacing = <4>;
};
sregs@fff3c000 {
compatible = "calxeda,hb-sregs";
reg = <0xfff3c000 0x1000>;
clocks {
#address-cells = <1>;
#size-cells = <0>;
osc: oscillator {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <33333000>;
};
ddrpll: ddrpll {
#clock-cells = <0>;
compatible = "calxeda,hb-pll-clock";
clocks = <&osc>;
reg = <0x108>;
};
a9pll: a9pll {
#clock-cells = <0>;
compatible = "calxeda,hb-pll-clock";
clocks = <&osc>;
reg = <0x100>;
};
a9periphclk: a9periphclk {
#clock-cells = <0>;
compatible = "calxeda,hb-a9periph-clock";
clocks = <&a9pll>;
reg = <0x104>;
};
a9bclk: a9bclk {
#clock-cells = <0>;
compatible = "calxeda,hb-a9bus-clock";
clocks = <&a9pll>;
reg = <0x104>;
};
emmcpll: emmcpll {
#clock-cells = <0>;
compatible = "calxeda,hb-pll-clock";
clocks = <&osc>;
reg = <0x10C>;
};
eclk: eclk {
#clock-cells = <0>;
compatible = "calxeda,hb-emmc-clock";
clocks = <&emmcpll>;
reg = <0x114>;
};
pclk: pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <150000000>;
};
};
};
dma@fff3d000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xfff3d000 0x1000>;
interrupts = <0 92 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
ethernet@fff50000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff50000 0x1000>;
interrupts = <0 77 4 0 78 4 0 79 4>;
dma-coherent;
};
ethernet@fff51000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff51000 0x1000>;
interrupts = <0 80 4 0 81 4 0 82 4>;
dma-coherent;
};
combophy0: combo-phy@fff58000 {
compatible = "calxeda,hb-combophy";
#phy-cells = <1>;
reg = <0xfff58000 0x1000>;
phydev = <5>;
};
combophy5: combo-phy@fff5d000 {
compatible = "calxeda,hb-combophy";
#phy-cells = <1>;
reg = <0xfff5d000 0x1000>;
phydev = <31>;
};
};
};
......@@ -244,5 +244,11 @@ pdma1: pdma@12690000 {
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
};
mdma1: mdma@12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <0 34 0>;
};
};
};
......@@ -16,6 +16,134 @@
/ {
pinctrl@11400000 {
gpa0: gpa0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpa1: gpa1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpb: gpb {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc0: gpc0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc1: gpc1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd0: gpd0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd1: gpd1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpe0: gpe0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpe1: gpe1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpe2: gpe2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpe3: gpe3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpe4: gpe4 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf0: gpf0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf1: gpf1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf2: gpf2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf3: gpf3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <0x2>;
......@@ -205,6 +333,151 @@ i2c1_bus: i2c1-bus {
};
pinctrl@11000000 {
gpj0: gpj0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpj1: gpj1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpk0: gpk0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpk1: gpk1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpk2: gpk2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpk3: gpk3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpl0: gpl0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpl1: gpl1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpl2: gpl2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpy0: gpy0 {
gpio-controller;
#gpio-cells = <2>;
};
gpy1: gpy1 {
gpio-controller;
#gpio-cells = <2>;
};
gpy2: gpy2 {
gpio-controller;
#gpio-cells = <2>;
};
gpy3: gpy3 {
gpio-controller;
#gpio-cells = <2>;
};
gpy4: gpy4 {
gpio-controller;
#gpio-cells = <2>;
};
gpy5: gpy5 {
gpio-controller;
#gpio-cells = <2>;
};
gpy6: gpy6 {
gpio-controller;
#gpio-cells = <2>;
};
gpx0: gpx0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
#interrupt-cells = <2>;
};
gpx1: gpx1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
#interrupt-cells = <2>;
};
gpx2: gpx2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpx3: gpx3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpk0-0";
samsung,pin-function = <2>;
......@@ -438,6 +711,11 @@ eint31: ext-int31 {
};
pinctrl@03860000 {
gpz: gpz {
gpio-controller;
#gpio-cells = <2>;
};
i2s0_bus: i2s0-bus {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
......
......@@ -46,27 +46,17 @@ pinctrl_0: pinctrl@11400000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
interrupt-controller;
#interrupt-cells = <2>;
};
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11000000 0x1000>;
interrupts = <0 46 0>;
interrupt-controller;
#interrupt-cells = <2>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
<0 32 0>;
interrupts = <0 32 0>;
};
};
......@@ -74,233 +64,4 @@ pinctrl_2: pinctrl@03860000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x03860000 0x1000>;
};
gpio-controllers {
#address-cells = <1>;
#size-cells = <1>;
gpio-controller;
ranges;
gpa0: gpio-controller@11400000 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400000 0x20>;
#gpio-cells = <4>;
};
gpa1: gpio-controller@11400020 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400020 0x20>;
#gpio-cells = <4>;
};
gpb: gpio-controller@11400040 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400040 0x20>;
#gpio-cells = <4>;
};
gpc0: gpio-controller@11400060 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400060 0x20>;
#gpio-cells = <4>;
};
gpc1: gpio-controller@11400080 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400080 0x20>;
#gpio-cells = <4>;
};
gpd0: gpio-controller@114000A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114000A0 0x20>;
#gpio-cells = <4>;
};
gpd1: gpio-controller@114000C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114000C0 0x20>;
#gpio-cells = <4>;
};
gpe0: gpio-controller@114000E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114000E0 0x20>;
#gpio-cells = <4>;
};
gpe1: gpio-controller@11400100 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400100 0x20>;
#gpio-cells = <4>;
};
gpe2: gpio-controller@11400120 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400120 0x20>;
#gpio-cells = <4>;
};
gpe3: gpio-controller@11400140 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400140 0x20>;
#gpio-cells = <4>;
};
gpe4: gpio-controller@11400160 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400160 0x20>;
#gpio-cells = <4>;
};
gpf0: gpio-controller@11400180 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400180 0x20>;
#gpio-cells = <4>;
};
gpf1: gpio-controller@114001A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114001A0 0x20>;
#gpio-cells = <4>;
};
gpf2: gpio-controller@114001C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114001C0 0x20>;
#gpio-cells = <4>;
};
gpf3: gpio-controller@114001E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114001E0 0x20>;
#gpio-cells = <4>;
};
gpj0: gpio-controller@11000000 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000000 0x20>;
#gpio-cells = <4>;
};
gpj1: gpio-controller@11000020 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000020 0x20>;
#gpio-cells = <4>;
};
gpk0: gpio-controller@11000040 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000040 0x20>;
#gpio-cells = <4>;
};
gpk1: gpio-controller@11000060 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000060 0x20>;
#gpio-cells = <4>;
};
gpk2: gpio-controller@11000080 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000080 0x20>;
#gpio-cells = <4>;
};
gpk3: gpio-controller@110000A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110000A0 0x20>;
#gpio-cells = <4>;
};
gpl0: gpio-controller@110000C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110000C0 0x20>;
#gpio-cells = <4>;
};
gpl1: gpio-controller@110000E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110000E0 0x20>;
#gpio-cells = <4>;
};
gpl2: gpio-controller@11000100 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000100 0x20>;
#gpio-cells = <4>;
};
gpy0: gpio-controller@11000120 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000120 0x20>;
#gpio-cells = <4>;
};
gpy1: gpio-controller@11000140 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000140 0x20>;
#gpio-cells = <4>;
};
gpy2: gpio-controller@11000160 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000160 0x20>;
#gpio-cells = <4>;
};
gpy3: gpio-controller@11000180 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000180 0x20>;
#gpio-cells = <4>;
};
gpy4: gpio-controller@110001A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110001A0 0x20>;
#gpio-cells = <4>;
};
gpy5: gpio-controller@110001C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110001C0 0x20>;
#gpio-cells = <4>;
};
gpy6: gpio-controller@110001E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110001E0 0x20>;
#gpio-cells = <4>;
};
gpx0: gpio-controller@11000C00 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000C00 0x20>;
#gpio-cells = <4>;
};
gpx1: gpio-controller@11000C20 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000C20 0x20>;
#gpio-cells = <4>;
};
gpx2: gpio-controller@11000C40 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000C40 0x20>;
#gpio-cells = <4>;
};
gpx3: gpio-controller@11000C60 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000C60 0x20>;
#gpio-cells = <4>;
};
gpz: gpio-controller@03860000 {
compatible = "samsung,exynos4-gpio";
reg = <0x03860000 0x20>;
#gpio-cells = <4>;
};
};
};
/*
* SAMSUNG SSDK5440 board device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "exynos5440.dtsi"
/ {
model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
compatible = "samsung,ssdk5440", "samsung,exynos5440";
memory {
reg = <0x80000000 0x80000000>;
};
chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC2,115200 init=/linuxrc";
};
spi {
status = "disabled";
};
i2c@F0000 {
status = "disabled";
};
i2c@100000 {
status = "disabled";
};
watchdog {
status = "disabled";
};
rtc {
status = "disabled";
};
};
/*
* SAMSUNG EXYNOS5440 SoC device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "samsung,exynos5440";
interrupt-parent = <&gic>;
gic:interrupt-controller@2E0000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x2E1000 0x1000>, <0x2E2000 0x1000>;
};
cpus {
cpu@0 {
compatible = "arm,cortex-a15";
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>;
clock-frequency = <1000000>;
};
};
cpu@1 {
compatible = "arm,cortex-a15";
timer {
compatible = "arm,armv7-timer";
interrupts = <1 14 0xf08>;
clock-frequency = <1000000>;
};
};
cpu@2 {
compatible = "arm,cortex-a15";
timer {
compatible = "arm,armv7-timer";
interrupts = <1 14 0xf08>;
clock-frequency = <1000000>;
};
};
cpu@3 {
compatible = "arm,cortex-a15";
timer {
compatible = "arm,armv7-timer";
interrupts = <1 14 0xf08>;
clock-frequency = <1000000>;
};
};
};
common {
compatible = "samsung,exynos5440";
};
serial@B0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
interrupts = <0 2 0>;
};
serial@C0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
interrupts = <0 3 0>;
};
spi {
compatible = "samsung,exynos4210-spi";
reg = <0xD0000 0x1000>;
interrupts = <0 4 0>;
tx-dma-channel = <&pdma0 5>; /* preliminary */
rx-dma-channel = <&pdma0 4>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
};
pinctrl {
compatible = "samsung,pinctrl-exynos5440";
reg = <0xE0000 0x1000>;
interrupt-controller;
#interrupt-cells = <2>;
#gpio-cells = <2>;
fan: fan {
samsung,exynos5440-pin-function = <1>;
};
hdd_led0: hdd_led0 {
samsung,exynos5440-pin-function = <2>;
};
hdd_led1: hdd_led1 {
samsung,exynos5440-pin-function = <3>;
};
uart1: uart1 {
samsung,exynos5440-pin-function = <4>;
};
};
i2c@F0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0xF0000 0x1000>;
interrupts = <0 5 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@100000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x100000 0x1000>;
interrupts = <0 6 0>;
#address-cells = <1>;
#size-cells = <0>;
};
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>;
interrupts = <0 1 0>;
};
amba {
#address-cells = <1>;
#size-cells = <1>;
compatible = "arm,amba-bus";
interrupt-parent = <&gic>;
ranges;
pdma0: pdma@121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x120000 0x1000>;
interrupts = <0 34 0>;
};
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121000 0x1000>;
interrupts = <0 35 0>;
};
};
rtc {
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
interrupts = <0 16 0>, <0 17 0>;
};
};
......@@ -69,16 +69,8 @@ memory {
reg = <0x00000000 0xff900000>;
};
chosen {
bootargs = "console=ttyAMA0";
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges;
ranges = <0x00000000 0x00000000 0xffffffff>;
timer@fff10600 {
compatible = "arm,cortex-a9-twd-timer";
......@@ -117,173 +109,6 @@ pmu {
interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
};
sata@ffe08000 {
compatible = "calxeda,hb-ahci";
reg = <0xffe08000 0x10000>;
interrupts = <0 83 4>;
calxeda,port-phys = <&combophy5 0 &combophy0 0
&combophy0 1 &combophy0 2
&combophy0 3>;
dma-coherent;
};
sdhci@ffe0e000 {
compatible = "calxeda,hb-sdhci";
reg = <0xffe0e000 0x1000>;
interrupts = <0 90 4>;
clocks = <&eclk>;
};
memory-controller@fff00000 {
compatible = "calxeda,hb-ddr-ctrl";
reg = <0xfff00000 0x1000>;
interrupts = <0 91 4>;
};
ipc@fff20000 {
compatible = "arm,pl320", "arm,primecell";
reg = <0xfff20000 0x1000>;
interrupts = <0 7 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpioe: gpio@fff30000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff30000 0x1000>;
interrupts = <0 14 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpiof: gpio@fff31000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff31000 0x1000>;
interrupts = <0 15 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpiog: gpio@fff32000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff32000 0x1000>;
interrupts = <0 16 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpioh: gpio@fff33000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff33000 0x1000>;
interrupts = <0 17 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
timer {
compatible = "arm,sp804", "arm,primecell";
reg = <0xfff34000 0x1000>;
interrupts = <0 18 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
rtc@fff35000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0xfff35000 0x1000>;
interrupts = <0 19 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
serial@fff36000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xfff36000 0x1000>;
interrupts = <0 20 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
smic@fff3a000 {
compatible = "ipmi-smic";
device_type = "ipmi";
reg = <0xfff3a000 0x1000>;
interrupts = <0 24 4>;
reg-size = <4>;
reg-spacing = <4>;
};
sregs@fff3c000 {
compatible = "calxeda,hb-sregs";
reg = <0xfff3c000 0x1000>;
clocks {
#address-cells = <1>;
#size-cells = <0>;
osc: oscillator {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <33333000>;
};
ddrpll: ddrpll {
#clock-cells = <0>;
compatible = "calxeda,hb-pll-clock";
clocks = <&osc>;
reg = <0x108>;
};
a9pll: a9pll {
#clock-cells = <0>;
compatible = "calxeda,hb-pll-clock";
clocks = <&osc>;
reg = <0x100>;
};
a9periphclk: a9periphclk {
#clock-cells = <0>;
compatible = "calxeda,hb-a9periph-clock";
clocks = <&a9pll>;
reg = <0x104>;
};
a9bclk: a9bclk {
#clock-cells = <0>;
compatible = "calxeda,hb-a9bus-clock";
clocks = <&a9pll>;
reg = <0x104>;
};
emmcpll: emmcpll {
#clock-cells = <0>;
compatible = "calxeda,hb-pll-clock";
clocks = <&osc>;
reg = <0x10C>;
};
eclk: eclk {
#clock-cells = <0>;
compatible = "calxeda,hb-emmc-clock";
clocks = <&emmcpll>;
reg = <0x114>;
};
pclk: pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <150000000>;
};
};
};
sregs@fff3c200 {
compatible = "calxeda,hb-sregs-l2-ecc";
......@@ -291,38 +116,7 @@ sregs@fff3c200 {
interrupts = <0 71 4 0 72 4>;
};
dma@fff3d000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xfff3d000 0x1000>;
interrupts = <0 92 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
ethernet@fff50000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff50000 0x1000>;
interrupts = <0 77 4 0 78 4 0 79 4>;
};
ethernet@fff51000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff51000 0x1000>;
interrupts = <0 80 4 0 81 4 0 82 4>;
};
combophy0: combo-phy@fff58000 {
compatible = "calxeda,hb-combophy";
#phy-cells = <1>;
reg = <0xfff58000 0x1000>;
phydev = <5>;
};
combophy5: combo-phy@fff5d000 {
compatible = "calxeda,hb-combophy";
#phy-cells = <1>;
reg = <0xfff5d000 0x1000>;
phydev = <31>;
};
};
};
/include/ "ecx-common.dtsi"
......@@ -23,10 +23,6 @@ memory {
soc {
aipi@10000000 { /* aipi */
wdog@10002000 {
status = "okay";
};
uart1: serial@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
......
......@@ -22,6 +22,22 @@ memory {
};
soc {
display@di0 {
compatible = "fsl,imx-parallel-display";
crtcs = <&ipu 0>;
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1_1>;
};
display@di1 {
compatible = "fsl,imx-parallel-display";
crtcs = <&ipu 1>;
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp2_1>;
};
aips@70000000 { /* aips-1 */
spba@70000000 {
esdhc@70004000 { /* ESDHC1 */
......
......@@ -62,6 +62,13 @@ soc {
interrupt-parent = <&tzic>;
ranges;
ipu: ipu@40000000 {
#crtc-cells = <1>;
compatible = "fsl,imx51-ipu";
reg = <0x40000000 0x20000000>;
interrupts = <11 10>;
};
aips@70000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
......@@ -80,6 +87,8 @@ esdhc@70004000 { /* ESDHC1 */
compatible = "fsl,imx51-esdhc";
reg = <0x70004000 0x4000>;
interrupts = <1>;
clocks = <&clks 44>, <&clks 0>, <&clks 71>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
......@@ -87,6 +96,8 @@ esdhc@70008000 { /* ESDHC2 */
compatible = "fsl,imx51-esdhc";
reg = <0x70008000 0x4000>;
interrupts = <2>;
clocks = <&clks 45>, <&clks 0>, <&clks 72>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
......@@ -94,6 +105,8 @@ uart3: serial@7000c000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x7000c000 0x4000>;
interrupts = <33>;
clocks = <&clks 32>, <&clks 33>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -103,6 +116,8 @@ ecspi@70010000 { /* ECSPI1 */
compatible = "fsl,imx51-ecspi";
reg = <0x70010000 0x4000>;
interrupts = <36>;
clocks = <&clks 51>, <&clks 52>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -110,6 +125,7 @@ ssi2: ssi@70014000 {
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x70014000 0x4000>;
interrupts = <30>;
clocks = <&clks 49>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
......@@ -119,6 +135,8 @@ esdhc@70020000 { /* ESDHC3 */
compatible = "fsl,imx51-esdhc";
reg = <0x70020000 0x4000>;
interrupts = <3>;
clocks = <&clks 46>, <&clks 0>, <&clks 73>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
......@@ -126,6 +144,8 @@ esdhc@70024000 { /* ESDHC4 */
compatible = "fsl,imx51-esdhc";
reg = <0x70024000 0x4000>;
interrupts = <4>;
clocks = <&clks 47>, <&clks 0>, <&clks 74>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
};
......@@ -202,12 +222,14 @@ wdog@73f98000 { /* WDOG1 */
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f98000 0x4000>;
interrupts = <58>;
clocks = <&clks 0>;
};
wdog@73f9c000 { /* WDOG2 */
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f9c000 0x4000>;
interrupts = <59>;
clocks = <&clks 0>;
status = "disabled";
};
......@@ -295,6 +317,66 @@ pinctrl_i2c2_1: i2c2grp-1 {
};
};
ipu_disp1 {
pinctrl_ipu_disp1_1: ipudisp1grp-1 {
fsl,pins = <
528 0x5 /* MX51_PAD_DISP1_DAT0__DISP1_DAT0 */
529 0x5 /* MX51_PAD_DISP1_DAT1__DISP1_DAT1 */
530 0x5 /* MX51_PAD_DISP1_DAT2__DISP1_DAT2 */
531 0x5 /* MX51_PAD_DISP1_DAT3__DISP1_DAT3 */
532 0x5 /* MX51_PAD_DISP1_DAT4__DISP1_DAT4 */
533 0x5 /* MX51_PAD_DISP1_DAT5__DISP1_DAT5 */
535 0x5 /* MX51_PAD_DISP1_DAT6__DISP1_DAT6 */
537 0x5 /* MX51_PAD_DISP1_DAT7__DISP1_DAT7 */
539 0x5 /* MX51_PAD_DISP1_DAT8__DISP1_DAT8 */
541 0x5 /* MX51_PAD_DISP1_DAT9__DISP1_DAT9 */
543 0x5 /* MX51_PAD_DISP1_DAT10__DISP1_DAT10 */
545 0x5 /* MX51_PAD_DISP1_DAT11__DISP1_DAT11 */
547 0x5 /* MX51_PAD_DISP1_DAT12__DISP1_DAT12 */
549 0x5 /* MX51_PAD_DISP1_DAT13__DISP1_DAT13 */
551 0x5 /* MX51_PAD_DISP1_DAT14__DISP1_DAT14 */
553 0x5 /* MX51_PAD_DISP1_DAT15__DISP1_DAT15 */
555 0x5 /* MX51_PAD_DISP1_DAT16__DISP1_DAT16 */
557 0x5 /* MX51_PAD_DISP1_DAT17__DISP1_DAT17 */
559 0x5 /* MX51_PAD_DISP1_DAT18__DISP1_DAT18 */
563 0x5 /* MX51_PAD_DISP1_DAT19__DISP1_DAT19 */
567 0x5 /* MX51_PAD_DISP1_DAT20__DISP1_DAT20 */
571 0x5 /* MX51_PAD_DISP1_DAT21__DISP1_DAT21 */
575 0x5 /* MX51_PAD_DISP1_DAT22__DISP1_DAT22 */
579 0x5 /* MX51_PAD_DISP1_DAT23__DISP1_DAT23 */
584 0x5 /* MX51_PAD_DI1_PIN2__DI1_PIN2 (hsync) */
583 0x5 /* MX51_PAD_DI1_PIN3__DI1_PIN3 (vsync) */
>;
};
};
ipu_disp2 {
pinctrl_ipu_disp2_1: ipudisp2grp-1 {
fsl,pins = <
603 0x5 /* MX51_PAD_DISP2_DAT0__DISP2_DAT0 */
608 0x5 /* MX51_PAD_DISP2_DAT1__DISP2_DAT1 */
613 0x5 /* MX51_PAD_DISP2_DAT2__DISP2_DAT2 */
614 0x5 /* MX51_PAD_DISP2_DAT3__DISP2_DAT3 */
615 0x5 /* MX51_PAD_DISP2_DAT4__DISP2_DAT4 */
616 0x5 /* MX51_PAD_DISP2_DAT5__DISP2_DAT5 */
617 0x5 /* MX51_PAD_DISP2_DAT6__DISP2_DAT6 */
622 0x5 /* MX51_PAD_DISP2_DAT7__DISP2_DAT7 */
627 0x5 /* MX51_PAD_DISP2_DAT8__DISP2_DAT8 */
633 0x5 /* MX51_PAD_DISP2_DAT9__DISP2_DAT9 */
637 0x5 /* MX51_PAD_DISP2_DAT10__DISP2_DAT10 */
643 0x5 /* MX51_PAD_DISP2_DAT11__DISP2_DAT11 */
648 0x5 /* MX51_PAD_DISP2_DAT12__DISP2_DAT12 */
652 0x5 /* MX51_PAD_DISP2_DAT13__DISP2_DAT13 */
656 0x5 /* MX51_PAD_DISP2_DAT14__DISP2_DAT14 */
661 0x5 /* MX51_PAD_DISP2_DAT15__DISP2_DAT15 */
593 0x5 /* MX51_PAD_DI2_PIN2__DI2_PIN2 (hsync) */
595 0x5 /* MX51_PAD_DI2_PIN3__DI2_PIN3 (vsync) */
597 0x5 /* MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK */
599 0x5 /* MX51_PAD_DI_GP4__DI2_PIN15 */
>;
};
};
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
......@@ -327,10 +409,30 @@ pinctrl_uart3_1: uart3grp-1 {
};
};
pwm1: pwm@73fb4000 {
#pwm-cells = <2>;
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
reg = <0x73fb4000 0x4000>;
clocks = <&clks 37>, <&clks 38>;
clock-names = "ipg", "per";
interrupts = <61>;
};
pwm2: pwm@73fb8000 {
#pwm-cells = <2>;
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
reg = <0x73fb8000 0x4000>;
clocks = <&clks 39>, <&clks 40>;
clock-names = "ipg", "per";
interrupts = <94>;
};
uart1: serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
clocks = <&clks 28>, <&clks 29>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -338,8 +440,17 @@ uart2: serial@73fc0000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fc0000 0x4000>;
interrupts = <32>;
clocks = <&clks 30>, <&clks 31>;
clock-names = "ipg", "per";
status = "disabled";
};
clks: ccm@73fd4000{
compatible = "fsl,imx51-ccm";
reg = <0x73fd4000 0x4000>;
interrupts = <0 71 0x04 0 72 0x04>;
#clock-cells = <1>;
};
};
aips@80000000 { /* AIPS2 */
......@@ -355,6 +466,8 @@ ecspi@83fac000 { /* ECSPI2 */
compatible = "fsl,imx51-ecspi";
reg = <0x83fac000 0x4000>;
interrupts = <37>;
clocks = <&clks 53>, <&clks 54>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -362,6 +475,8 @@ sdma@83fb0000 {
compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
reg = <0x83fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks 56>, <&clks 56>;
clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
};
......@@ -371,6 +486,8 @@ cspi@83fc0000 {
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
reg = <0x83fc0000 0x4000>;
interrupts = <38>;
clocks = <&clks 55>, <&clks 0>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -380,6 +497,7 @@ i2c@83fc4000 { /* I2C2 */
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc4000 0x4000>;
interrupts = <63>;
clocks = <&clks 35>;
status = "disabled";
};
......@@ -389,6 +507,7 @@ i2c@83fc8000 { /* I2C1 */
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc8000 0x4000>;
interrupts = <62>;
clocks = <&clks 34>;
status = "disabled";
};
......@@ -396,6 +515,7 @@ ssi1: ssi@83fcc000 {
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fcc000 0x4000>;
interrupts = <29>;
clocks = <&clks 48>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
......@@ -411,6 +531,7 @@ nand@83fdb000 {
compatible = "fsl,imx51-nand";
reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
interrupts = <8>;
clocks = <&clks 60>;
status = "disabled";
};
......@@ -418,6 +539,7 @@ ssi3: ssi@83fe8000 {
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fe8000 0x4000>;
interrupts = <96>;
clocks = <&clks 50>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
......@@ -427,6 +549,8 @@ ethernet@83fec000 {
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
reg = <0x83fec000 0x4000>;
interrupts = <87>;
clocks = <&clks 42>, <&clks 42>, <&clks 42>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
};
......
......@@ -67,6 +67,13 @@ soc {
interrupt-parent = <&tzic>;
ranges;
ipu: ipu@18000000 {
#crtc-cells = <1>;
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
};
aips@50000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
......@@ -85,6 +92,8 @@ esdhc@50004000 { /* ESDHC1 */
compatible = "fsl,imx53-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
clocks = <&clks 44>, <&clks 0>, <&clks 71>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
......@@ -92,6 +101,8 @@ esdhc@50008000 { /* ESDHC2 */
compatible = "fsl,imx53-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
clocks = <&clks 45>, <&clks 0>, <&clks 72>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
......@@ -99,6 +110,8 @@ uart3: serial@5000c000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
clocks = <&clks 32>, <&clks 33>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -108,6 +121,8 @@ ecspi@50010000 { /* ECSPI1 */
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
clocks = <&clks 51>, <&clks 52>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -115,6 +130,7 @@ ssi2: ssi@50014000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
clocks = <&clks 49>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
......@@ -124,6 +140,8 @@ esdhc@50020000 { /* ESDHC3 */
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
clocks = <&clks 46>, <&clks 0>, <&clks 73>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
......@@ -131,6 +149,8 @@ esdhc@50024000 { /* ESDHC4 */
compatible = "fsl,imx53-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
clocks = <&clks 47>, <&clks 0>, <&clks 74>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
};
......@@ -207,12 +227,14 @@ wdog@53f98000 { /* WDOG1 */
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
clocks = <&clks 0>;
};
wdog@53f9c000 { /* WDOG2 */
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f9c000 0x4000>;
interrupts = <59>;
clocks = <&clks 0>;
status = "disabled";
};
......@@ -371,10 +393,30 @@ pinctrl_uart3_1: uart3grp-1 {
};
};
pwm1: pwm@53fb4000 {
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>;
clocks = <&clks 37>, <&clks 38>;
clock-names = "ipg", "per";
interrupts = <61>;
};
pwm2: pwm@53fb8000 {
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>;
clocks = <&clks 39>, <&clks 40>;
clock-names = "ipg", "per";
interrupts = <94>;
};
uart1: serial@53fbc000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
clocks = <&clks 28>, <&clks 29>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -382,6 +424,8 @@ uart2: serial@53fc0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
clocks = <&clks 30>, <&clks 31>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -389,6 +433,8 @@ can1: can@53fc8000 {
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
clocks = <&clks 158>, <&clks 157>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -396,9 +442,18 @@ can2: can@53fcc000 {
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
clocks = <&clks 158>, <&clks 157>;
clock-names = "ipg", "per";
status = "disabled";
};
clks: ccm@53fd4000{
compatible = "fsl,imx53-ccm";
reg = <0x53fd4000 0x4000>;
interrupts = <0 71 0x04 0 72 0x04>;
#clock-cells = <1>;
};
gpio5: gpio@53fdc000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fdc000 0x4000>;
......@@ -435,6 +490,7 @@ i2c@53fec000 { /* I2C3 */
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x53fec000 0x4000>;
interrupts = <64>;
clocks = <&clks 88>;
status = "disabled";
};
......@@ -442,6 +498,8 @@ uart4: serial@53ff0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
clocks = <&clks 65>, <&clks 66>;
clock-names = "ipg", "per";
status = "disabled";
};
};
......@@ -457,6 +515,8 @@ uart5: serial@63f90000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
clocks = <&clks 67>, <&clks 68>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -466,6 +526,8 @@ ecspi@63fac000 { /* ECSPI2 */
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
clocks = <&clks 53>, <&clks 54>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -473,6 +535,8 @@ sdma@63fb0000 {
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks 56>, <&clks 56>;
clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
......@@ -482,6 +546,8 @@ cspi@63fc0000 {
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
clocks = <&clks 55>, <&clks 0>;
clock-names = "ipg", "per";
status = "disabled";
};
......@@ -491,6 +557,7 @@ i2c@63fc4000 { /* I2C2 */
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
clocks = <&clks 35>;
status = "disabled";
};
......@@ -500,6 +567,7 @@ i2c@63fc8000 { /* I2C1 */
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
clocks = <&clks 34>;
status = "disabled";
};
......@@ -507,6 +575,7 @@ ssi1: ssi@63fcc000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
clocks = <&clks 48>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
......@@ -522,6 +591,7 @@ nand@63fdb000 {
compatible = "fsl,imx53-nand";
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
interrupts = <8>;
clocks = <&clks 60>;
status = "disabled";
};
......@@ -529,6 +599,7 @@ ssi3: ssi@63fe8000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
clocks = <&clks 50>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
......@@ -538,6 +609,8 @@ ethernet@63fec000 {
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
clocks = <&clks 42>, <&clks 42>, <&clks 42>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
};
......
......@@ -268,23 +268,39 @@ aipstz@0207c000 { /* AIPSTZ1 */
};
pwm@02080000 { /* PWM1 */
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <0 83 0x04>;
clocks = <&clks 62>, <&clks 145>;
clock-names = "ipg", "per";
};
pwm@02084000 { /* PWM2 */
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <0 84 0x04>;
clocks = <&clks 62>, <&clks 146>;
clock-names = "ipg", "per";
};
pwm@02088000 { /* PWM3 */
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <0 85 0x04>;
clocks = <&clks 62>, <&clks 147>;
clock-names = "ipg", "per";
};
pwm@0208c000 { /* PWM4 */
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <0 86 0x04>;
clocks = <&clks 62>, <&clks 148>;
clock-names = "ipg", "per";
};
flexcan@02090000 { /* CAN1 */
......@@ -1001,5 +1017,23 @@ uart5: serial@021f4000 {
status = "disabled";
};
};
ipu1: ipu@02400000 {
#crtc-cells = <1>;
compatible = "fsl,imx6q-ipu";
reg = <0x02400000 0x400000>;
interrupts = <0 6 0x4 0 5 0x4>;
clocks = <&clks 130>, <&clks 131>, <&clks 132>;
clock-names = "bus", "di0", "di1";
};
ipu2: ipu@02800000 {
#crtc-cells = <1>;
compatible = "fsl,imx6q-ipu";
reg = <0x02800000 0x400000>;
interrupts = <0 8 0x4 0 7 0x4>;
clocks = <&clks 133>, <&clks 134>, <&clks 137>;
clock-names = "bus", "di0", "di1";
};
};
};
/*
* Device Tree Source for the sh7377 SoC
*
* Copyright (C) 2012 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "renesas,sh7377";
cpus {
cpu@0 {
compatible = "arm,cortex-a8";
};
};
};
/*
* Copyright 2012 Stefan Roese
* Stefan Roese <sr@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "sun4i.dtsi"
/ {
model = "Cubietech Cubieboard";
compatible = "cubietech,cubieboard", "allwinner,sun4i";
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
chosen {
bootargs = "earlyprintk console=ttyS0,115200";
};
soc {
uart0: uart@01c28000 {
status = "okay";
};
uart1: uart@01c28400 {
status = "okay";
};
};
};
/*
* Copyright 2012 Stefan Roese
* Stefan Roese <sr@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "sunxi.dtsi"
/ {
memory {
reg = <0x40000000 0x80000000>;
};
};
/*
* Copyright 2012 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "sun5i.dtsi"
/ {
model = "Olimex A13-Olinuxino";
compatible = "olimex,a13-olinuxino", "allwinner,sun5i";
chosen {
bootargs = "earlyprintk console=ttyS0,115200";
};
soc {
uart1: uart@01c28400 {
status = "okay";
};
};
};
/*
* Copyright 2012 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "sunxi.dtsi"
/ {
memory {
reg = <0x40000000 0x20000000>;
};
};
/*
* Copyright 2012 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
interrupt-parent = <&intc>;
cpus {
cpu@0 {
compatible = "arm,cortex-a8";
};
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
osc: oscillator {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x01c20000 0x300000>;
ranges;
timer@01c20c00 {
compatible = "allwinner,sunxi-timer";
reg = <0x01c20c00 0x90>;
interrupts = <22>;
clocks = <&osc>;
};
wdt: watchdog@01c20c90 {
compatible = "allwinner,sunxi-wdt";
reg = <0x01c20c90 0x10>;
};
intc: interrupt-controller@01c20400 {
compatible = "allwinner,sunxi-ic";
reg = <0x01c20400 0x400>;
interrupt-controller;
#interrupt-cells = <1>;
};
uart0: uart@01c28000 {
compatible = "ns8250";
reg = <0x01c28000 0x400>;
interrupts = <1>;
reg-shift = <2>;
clock-frequency = <24000000>;
status = "disabled";
};
uart1: uart@01c28400 {
compatible = "ns8250";
reg = <0x01c28400 0x400>;
interrupts = <2>;
reg-shift = <2>;
clock-frequency = <24000000>;
status = "disabled";
};
};
};
......@@ -4,6 +4,15 @@ / {
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
cache-controller@50043000 {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
arm,data-latency = <5 5 2>;
arm,tag-latency = <4 4 2>;
cache-unified;
cache-level = <2>;
};
intc: interrupt-controller {
compatible = "arm,cortex-a9-gic";
reg = <0x50041000 0x1000
......
......@@ -4,6 +4,15 @@ / {
compatible = "nvidia,tegra30";
interrupt-parent = <&intc>;
cache-controller@50043000 {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
arm,data-latency = <6 6 2>;
arm,tag-latency = <5 5 2>;
cache-unified;
cache-level = <2>;
};
intc: interrupt-controller {
compatible = "arm,cortex-a9-gic";
reg = <0x50041000 0x1000
......
......@@ -17,17 +17,16 @@
* CHANGES TO vexpress-v2m.dtsi!
*/
/ {
aliases {
arm,v2m_timer = &v2m_timer01;
};
motherboard {
compatible = "simple-bus";
model = "V2M-P1";
arm,hbi = <0x190>;
arm,vexpress,site = <0>;
arm,v2m-memory-map = "rs1";
compatible = "arm,vexpress,v2m-p1", "simple-bus";
#address-cells = <2>; /* SMB chipselect number and offset */
#size-cells = <1>;
#interrupt-cells = <1>;
ranges;
flash@0,00000000 {
compatible = "arm,vexpress-flash", "cfi-flash";
......@@ -72,14 +71,20 @@ iofpga@3,00000000 {
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
sysreg@010000 {
v2m_sysreg: sysreg@010000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
sysctl@020000 {
v2m_sysctl: sysctl@020000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
clock-names = "refclk", "timclk", "apb_pclk";
#clock-cells = <1>;
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
};
/* PCI-E I2C bus */
......@@ -100,66 +105,92 @@ aaci@040000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x040000 0x1000>;
interrupts = <11>;
clocks = <&smbclk>;
clock-names = "apb_pclk";
};
mmci@050000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9 10>;
cd-gpios = <&v2m_sysreg 0 0>;
wp-gpios = <&v2m_sysreg 1 0>;
max-frequency = <12000000>;
vmmc-supply = <&v2m_fixed_3v3>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
clock-names = "mclk", "apb_pclk";
};
kmi@060000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <12>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
clock-names = "KMIREFCLK", "apb_pclk";
};
kmi@070000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <13>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
clock-names = "KMIREFCLK", "apb_pclk";
};
v2m_serial0: uart@090000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial1: uart@0a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial2: uart@0b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial3: uart@0c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
wdt@0f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0>;
clocks = <&v2m_refclk32khz>, <&smbclk>;
clock-names = "wdogclk", "apb_pclk";
};
v2m_timer01: timer@110000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x110000 0x1000>;
interrupts = <2>;
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
clock-names = "timclken1", "timclken2", "apb_pclk";
};
v2m_timer23: timer@120000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x120000 0x1000>;
interrupts = <3>;
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
clock-names = "timclken1", "timclken2", "apb_pclk";
};
/* DVI I2C bus */
......@@ -185,6 +216,8 @@ rtc@170000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x170000 0x1000>;
interrupts = <4>;
clocks = <&smbclk>;
clock-names = "apb_pclk";
};
compact-flash@1a0000 {
......@@ -198,6 +231,8 @@ clcd@1f0000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x1f0000 0x1000>;
interrupts = <14>;
clocks = <&v2m_oscclk1>, <&smbclk>;
clock-names = "clcdclk", "apb_pclk";
};
};
......@@ -208,5 +243,98 @@ v2m_fixed_3v3: fixedregulator@0 {
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
v2m_clk24mhz: clk24mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "v2m:clk24mhz";
};
v2m_refclk1mhz: refclk1mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "v2m:refclk1mhz";
};
v2m_refclk32khz: refclk32khz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "v2m:refclk32khz";
};
mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
/* MCC static memory clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <25000000 60000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk0";
};
v2m_oscclk1: osc@1 {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <23750000 63500000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk1";
};
v2m_oscclk2: osc@2 {
/* IO FPGA peripheral clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <24000000 24000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk2";
};
volt@0 {
/* Logic level voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "VIO";
regulator-always-on;
label = "VIO";
};
temp@0 {
/* MCC internal operating temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "MCC";
};
reset@0 {
compatible = "arm,vexpress-reset";
arm,vexpress-sysreg,func = <5 0>;
};
muxfpga@0 {
compatible = "arm,vexpress-muxfpga";
arm,vexpress-sysreg,func = <7 0>;
};
shutdown@0 {
compatible = "arm,vexpress-shutdown";
arm,vexpress-sysreg,func = <8 0>;
};
reboot@0 {
compatible = "arm,vexpress-reboot";
arm,vexpress-sysreg,func = <9 0>;
};
dvimode@0 {
compatible = "arm,vexpress-dvimode";
arm,vexpress-sysreg,func = <11 0>;
};
};
};
};
......@@ -17,16 +17,15 @@
* CHANGES TO vexpress-v2m-rs1.dtsi!
*/
/ {
aliases {
arm,v2m_timer = &v2m_timer01;
};
motherboard {
compatible = "simple-bus";
model = "V2M-P1";
arm,hbi = <0x190>;
arm,vexpress,site = <0>;
compatible = "arm,vexpress,v2m-p1", "simple-bus";
#address-cells = <2>; /* SMB chipselect number and offset */
#size-cells = <1>;
#interrupt-cells = <1>;
ranges;
flash@0,00000000 {
compatible = "arm,vexpress-flash", "cfi-flash";
......@@ -71,14 +70,20 @@ iofpga@7,00000000 {
#size-cells = <1>;
ranges = <0 7 0 0x20000>;
sysreg@00000 {
v2m_sysreg: sysreg@00000 {
compatible = "arm,vexpress-sysreg";
reg = <0x00000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
sysctl@01000 {
v2m_sysctl: sysctl@01000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x01000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
clock-names = "refclk", "timclk", "apb_pclk";
#clock-cells = <1>;
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
};
/* PCI-E I2C bus */
......@@ -99,66 +104,92 @@ aaci@04000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x04000 0x1000>;
interrupts = <11>;
clocks = <&smbclk>;
clock-names = "apb_pclk";
};
mmci@05000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x05000 0x1000>;
interrupts = <9 10>;
cd-gpios = <&v2m_sysreg 0 0>;
wp-gpios = <&v2m_sysreg 1 0>;
max-frequency = <12000000>;
vmmc-supply = <&v2m_fixed_3v3>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
clock-names = "mclk", "apb_pclk";
};
kmi@06000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x06000 0x1000>;
interrupts = <12>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
clock-names = "KMIREFCLK", "apb_pclk";
};
kmi@07000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x07000 0x1000>;
interrupts = <13>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
clock-names = "KMIREFCLK", "apb_pclk";
};
v2m_serial0: uart@09000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x09000 0x1000>;
interrupts = <5>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial1: uart@0a000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a000 0x1000>;
interrupts = <6>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial2: uart@0b000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b000 0x1000>;
interrupts = <7>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial3: uart@0c000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c000 0x1000>;
interrupts = <8>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
wdt@0f000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f000 0x1000>;
interrupts = <0>;
clocks = <&v2m_refclk32khz>, <&smbclk>;
clock-names = "wdogclk", "apb_pclk";
};
v2m_timer01: timer@11000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x11000 0x1000>;
interrupts = <2>;
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
clock-names = "timclken1", "timclken2", "apb_pclk";
};
v2m_timer23: timer@12000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x12000 0x1000>;
interrupts = <3>;
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
clock-names = "timclken1", "timclken2", "apb_pclk";
};
/* DVI I2C bus */
......@@ -184,6 +215,8 @@ rtc@17000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x17000 0x1000>;
interrupts = <4>;
clocks = <&smbclk>;
clock-names = "apb_pclk";
};
compact-flash@1a000 {
......@@ -197,6 +230,8 @@ clcd@1f000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x1f000 0x1000>;
interrupts = <14>;
clocks = <&v2m_oscclk1>, <&smbclk>;
clock-names = "clcdclk", "apb_pclk";
};
};
......@@ -207,5 +242,98 @@ v2m_fixed_3v3: fixedregulator@0 {
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
v2m_clk24mhz: clk24mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "v2m:clk24mhz";
};
v2m_refclk1mhz: refclk1mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "v2m:refclk1mhz";
};
v2m_refclk32khz: refclk32khz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "v2m:refclk32khz";
};
mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
/* MCC static memory clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <25000000 60000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk0";
};
v2m_oscclk1: osc@1 {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <23750000 63500000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk1";
};
v2m_oscclk2: osc@2 {
/* IO FPGA peripheral clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <24000000 24000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk2";
};
volt@0 {
/* Logic level voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "VIO";
regulator-always-on;
label = "VIO";
};
temp@0 {
/* MCC internal operating temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "MCC";
};
reset@0 {
compatible = "arm,vexpress-reset";
arm,vexpress-sysreg,func = <5 0>;
};
muxfpga@0 {
compatible = "arm,vexpress-muxfpga";
arm,vexpress-sysreg,func = <7 0>;
};
shutdown@0 {
compatible = "arm,vexpress-shutdown";
arm,vexpress-sysreg,func = <8 0>;
};
reboot@0 {
compatible = "arm,vexpress-reboot";
arm,vexpress-sysreg,func = <9 0>;
};
dvimode@0 {
compatible = "arm,vexpress-dvimode";
arm,vexpress-sysreg,func = <11 0>;
};
};
};
};
......@@ -12,6 +12,7 @@
/ {
model = "V2P-CA15";
arm,hbi = <0x237>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <2>;
......@@ -54,17 +55,24 @@ hdlcd@2b000000 {
compatible = "arm,hdlcd";
reg = <0 0x2b000000 0 0x1000>;
interrupts = <0 85 4>;
clocks = <&oscclk5>;
clock-names = "pxlclk";
};
memory-controller@2b0a0000 {
compatible = "arm,pl341", "arm,primecell";
reg = <0 0x2b0a0000 0 0x1000>;
clocks = <&oscclk7>;
clock-names = "apb_pclk";
};
wdt@2b060000 {
compatible = "arm,sp805", "arm,primecell";
status = "disabled";
reg = <0 0x2b060000 0 0x1000>;
interrupts = <98>;
clocks = <&oscclk7>;
clock-names = "apb_pclk";
};
gic: interrupt-controller@2c001000 {
......@@ -84,6 +92,8 @@ memory-controller@7ffd0000 {
reg = <0 0x7ffd0000 0 0x1000>;
interrupts = <0 86 4>,
<0 87 4>;
clocks = <&oscclk7>;
clock-names = "apb_pclk";
};
dma@7ffb0000 {
......@@ -94,6 +104,8 @@ dma@7ffb0000 {
<0 89 4>,
<0 90 4>,
<0 91 4>;
clocks = <&oscclk7>;
clock-names = "apb_pclk";
};
timer {
......@@ -110,7 +122,109 @@ pmu {
<0 69 4>;
};
motherboard {
dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
/* CPU PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <50000000 60000000>;
#clock-cells = <0>;
clock-output-names = "oscclk0";
};
osc@4 {
/* Multiplexed AXI master clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
freq-range = <20000000 40000000>;
#clock-cells = <0>;
clock-output-names = "oscclk4";
};
oscclk5: osc@5 {
/* HDLCD PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 5>;
freq-range = <23750000 165000000>;
#clock-cells = <0>;
clock-output-names = "oscclk5";
};
smbclk: osc@6 {
/* SMB clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 6>;
freq-range = <20000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk6";
};
oscclk7: osc@7 {
/* SYS PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 7>;
freq-range = <20000000 60000000>;
#clock-cells = <0>;
clock-output-names = "oscclk7";
};
osc@8 {
/* DDR2 PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 8>;
freq-range = <40000000 40000000>;
#clock-cells = <0>;
clock-output-names = "oscclk8";
};
volt@0 {
/* CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "Cores";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
label = "Cores";
};
amp@0 {
/* Total current for the two cores */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 0>;
label = "Cores";
};
temp@0 {
/* DCC internal temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "DCC";
};
power@0 {
/* Total power */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 0>;
label = "Cores";
};
energy@0 {
/* Total energy */
compatible = "arm,vexpress-energy";
arm,vexpress-sysreg,func = <13 0>;
label = "Cores";
};
};
smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0 0x08000000 0x04000000>,
<1 0 0 0x14000000 0x04000000>,
<2 0 0 0x18000000 0x04000000>,
......@@ -118,6 +232,7 @@ motherboard {
<4 0 0 0x0c000000 0x04000000>,
<5 0 0 0x10000000 0x04000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <0 0 0 &gic 0 0 4>,
<0 0 1 &gic 0 1 4>,
......@@ -162,7 +277,7 @@ motherboard {
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
/include/ "vexpress-v2m-rs1.dtsi"
};
};
/include/ "vexpress-v2m-rs1.dtsi"
......@@ -12,6 +12,7 @@
/ {
model = "V2P-CA15_CA7";
arm,hbi = <0x249>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <2>;
......@@ -74,17 +75,23 @@ wdt@2a490000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0 0x2a490000 0 0x1000>;
interrupts = <98>;
clocks = <&oscclk6a>, <&oscclk6a>;
clock-names = "wdogclk", "apb_pclk";
};
hdlcd@2b000000 {
compatible = "arm,hdlcd";
reg = <0 0x2b000000 0 0x1000>;
interrupts = <0 85 4>;
clocks = <&oscclk5>;
clock-names = "pxlclk";
};
memory-controller@2b0a0000 {
compatible = "arm,pl341", "arm,primecell";
reg = <0 0x2b0a0000 0 0x1000>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
};
gic: interrupt-controller@2c001000 {
......@@ -104,6 +111,8 @@ memory-controller@7ffd0000 {
reg = <0 0x7ffd0000 0 0x1000>;
interrupts = <0 86 4>,
<0 87 4>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
};
dma@7ff00000 {
......@@ -114,6 +123,8 @@ dma@7ff00000 {
<0 89 4>,
<0 90 4>,
<0 91 4>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
};
timer {
......@@ -130,7 +141,175 @@ pmu {
<0 69 4>;
};
motherboard {
oscclk6a: oscclk6a {
/* Reference 24MHz clock */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "oscclk6a";
};
dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
/* A15 PLL 0 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk0";
};
osc@1 {
/* A15 PLL 1 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk1";
};
osc@2 {
/* A7 PLL 0 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk2";
};
osc@3 {
/* A7 PLL 1 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 3>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk3";
};
osc@4 {
/* External AXI master clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
freq-range = <20000000 40000000>;
#clock-cells = <0>;
clock-output-names = "oscclk4";
};
oscclk5: osc@5 {
/* HDLCD PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 5>;
freq-range = <23750000 165000000>;
#clock-cells = <0>;
clock-output-names = "oscclk5";
};
smbclk: osc@6 {
/* Static memory controller clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 6>;
freq-range = <20000000 40000000>;
#clock-cells = <0>;
clock-output-names = "oscclk6";
};
osc@7 {
/* SYS PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 7>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk7";
};
osc@8 {
/* DDR2 PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 8>;
freq-range = <20000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk8";
};
volt@0 {
/* A15 CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "A15 Vcore";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
label = "A15 Vcore";
};
volt@1 {
/* A7 CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
regulator-name = "A7 Vcore";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
label = "A7 Vcore";
};
amp@0 {
/* Total current for the two A15 cores */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 0>;
label = "A15 Icore";
};
amp@1 {
/* Total current for the three A7 cores */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 1>;
label = "A7 Icore";
};
temp@0 {
/* DCC internal temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "DCC";
};
power@0 {
/* Total power for the two A15 cores */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 0>;
label = "A15 Pcore";
};
power@1 {
/* Total power for the three A7 cores */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 1>;
label = "A7 Pcore";
};
energy@0 {
/* Total energy for the two A15 cores */
compatible = "arm,vexpress-energy";
arm,vexpress-sysreg,func = <13 0>;
label = "A15 Jcore";
};
energy@2 {
/* Total energy for the three A7 cores */
compatible = "arm,vexpress-energy";
arm,vexpress-sysreg,func = <13 2>;
label = "A7 Jcore";
};
};
smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0 0x08000000 0x04000000>,
<1 0 0 0x14000000 0x04000000>,
<2 0 0 0x18000000 0x04000000>,
......@@ -138,6 +317,7 @@ motherboard {
<4 0 0 0x0c000000 0x04000000>,
<5 0 0 0x10000000 0x04000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <0 0 0 &gic 0 0 4>,
<0 0 1 &gic 0 1 4>,
......@@ -182,7 +362,7 @@ motherboard {
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
/include/ "vexpress-v2m-rs1.dtsi"
};
};
/include/ "vexpress-v2m-rs1.dtsi"
......@@ -12,6 +12,7 @@
/ {
model = "V2P-CA5s";
arm,hbi = <0x225>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <1>;
......@@ -56,11 +57,15 @@ hdlcd@2a110000 {
compatible = "arm,hdlcd";
reg = <0x2a110000 0x1000>;
interrupts = <0 85 4>;
clocks = <&oscclk3>;
clock-names = "pxlclk";
};
memory-controller@2a150000 {
compatible = "arm,pl341", "arm,primecell";
reg = <0x2a150000 0x1000>;
clocks = <&oscclk1>;
clock-names = "apb_pclk";
};
memory-controller@2a190000 {
......@@ -68,6 +73,8 @@ memory-controller@2a190000 {
reg = <0x2a190000 0x1000>;
interrupts = <0 86 4>,
<0 87 4>;
clocks = <&oscclk1>;
clock-names = "apb_pclk";
};
scu@2c000000 {
......@@ -109,7 +116,77 @@ pmu {
<0 69 4>;
};
motherboard {
dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
/* CPU and internal AXI reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <50000000 100000000>;
#clock-cells = <0>;
clock-output-names = "oscclk0";
};
oscclk1: osc@1 {
/* Multiplexed AXI master clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <5000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk1";
};
osc@2 {
/* DDR2 */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <80000000 120000000>;
#clock-cells = <0>;
clock-output-names = "oscclk2";
};
oscclk3: osc@3 {
/* HDLCD */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 3>;
freq-range = <23750000 165000000>;
#clock-cells = <0>;
clock-output-names = "oscclk3";
};
osc@4 {
/* Test chip gate configuration */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
freq-range = <80000000 80000000>;
#clock-cells = <0>;
clock-output-names = "oscclk4";
};
smbclk: osc@5 {
/* SMB clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 5>;
freq-range = <25000000 60000000>;
#clock-cells = <0>;
clock-output-names = "oscclk5";
};
temp@0 {
/* DCC internal operating temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "DCC";
};
};
smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x08000000 0x04000000>,
<1 0 0x14000000 0x04000000>,
<2 0 0x18000000 0x04000000>,
......@@ -117,6 +194,7 @@ motherboard {
<4 0 0x0c000000 0x04000000>,
<5 0 0x10000000 0x04000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <0 0 0 &gic 0 0 4>,
<0 0 1 &gic 0 1 4>,
......@@ -161,7 +239,7 @@ motherboard {
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
/include/ "vexpress-v2m-rs1.dtsi"
};
};
/include/ "vexpress-v2m-rs1.dtsi"
......@@ -12,6 +12,7 @@
/ {
model = "V2P-CA9";
arm,hbi = <0x191>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <1>;
......@@ -70,11 +71,15 @@ clcd@10020000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x10020000 0x1000>;
interrupts = <0 44 4>;
clocks = <&oscclk1>, <&oscclk2>;
clock-names = "clcdclk", "apb_pclk";
};
memory-controller@100e0000 {
compatible = "arm,pl341", "arm,primecell";
reg = <0x100e0000 0x1000>;
clocks = <&oscclk2>;
clock-names = "apb_pclk";
};
memory-controller@100e1000 {
......@@ -82,6 +87,8 @@ memory-controller@100e1000 {
reg = <0x100e1000 0x1000>;
interrupts = <0 45 4>,
<0 46 4>;
clocks = <&oscclk2>;
clock-names = "apb_pclk";
};
timer@100e4000 {
......@@ -89,12 +96,16 @@ timer@100e4000 {
reg = <0x100e4000 0x1000>;
interrupts = <0 48 4>,
<0 49 4>;
clocks = <&oscclk2>, <&oscclk2>;
clock-names = "timclk", "apb_pclk";
};
watchdog@100e5000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x100e5000 0x1000>;
interrupts = <0 51 4>;
clocks = <&oscclk2>, <&oscclk2>;
clock-names = "wdogclk", "apb_pclk";
};
scu@1e000000 {
......@@ -140,13 +151,132 @@ pmu {
<0 63 4>;
};
motherboard {
dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
/* ACLK clock to the AXI master port on the test chip */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <30000000 50000000>;
#clock-cells = <0>;
clock-output-names = "extsaxiclk";
};
oscclk1: osc@1 {
/* Reference clock for the CLCD */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <10000000 80000000>;
#clock-cells = <0>;
clock-output-names = "clcdclk";
};
smbclk: oscclk2: osc@2 {
/* Reference clock for the test chip internal PLLs */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <33000000 100000000>;
#clock-cells = <0>;
clock-output-names = "tcrefclk";
};
volt@0 {
/* Test Chip internal logic voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "VD10";
regulator-always-on;
label = "VD10";
};
volt@1 {
/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
regulator-name = "VD10_S2";
regulator-always-on;
label = "VD10_S2";
};
volt@2 {
/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 2>;
regulator-name = "VD10_S3";
regulator-always-on;
label = "VD10_S3";
};
volt@3 {
/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 3>;
regulator-name = "VCC1V8";
regulator-always-on;
label = "VCC1V8";
};
volt@4 {
/* DDR2 SDRAM VTT termination voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 4>;
regulator-name = "DDR2VTT";
regulator-always-on;
label = "DDR2VTT";
};
volt@5 {
/* Local board supply for miscellaneous logic external to the Test Chip */
arm,vexpress-sysreg,func = <2 5>;
compatible = "arm,vexpress-volt";
regulator-name = "VCC3V3";
regulator-always-on;
label = "VCC3V3";
};
amp@0 {
/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 0>;
label = "VD10_S2";
};
amp@1 {
/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 1>;
label = "VD10_S3";
};
power@0 {
/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 0>;
label = "PVD10_S2";
};
power@1 {
/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 1>;
label = "PVD10_S3";
};
};
smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x40000000 0x04000000>,
<1 0 0x44000000 0x04000000>,
<2 0 0x48000000 0x04000000>,
<3 0 0x4c000000 0x04000000>,
<7 0 0x10000000 0x00020000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <0 0 0 &gic 0 0 4>,
<0 0 1 &gic 0 1 4>,
......@@ -191,7 +321,7 @@ motherboard {
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
/include/ "vexpress-v2m.dtsi"
};
};
/include/ "vexpress-v2m.dtsi"
......@@ -7,6 +7,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_IPC_NS is not set
# CONFIG_PID_NS is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......
......@@ -66,8 +66,6 @@ CONFIG_TTY_PRINTK=y
# CONFIG_FILE_LOCKING is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_PROC_FS is not set
# CONFIG_SYSFS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
......
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_CGROUPS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_SCHED=y
CONFIG_BLK_CGROUP=y
CONFIG_NAMESPACES=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_EFI_PARTITION=y
CONFIG_ARCH_BCM=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_ERRATA_743622=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_COMPACTION is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_CMDLINE="console=ttyS0,115200n8 mem=128M"
CONFIG_CPU_IDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_BLK_DEV is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DW=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_USB_SUPPORT is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_DEBUG_INFO=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_LL=y
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC7=y
CONFIG_XZ_DEC=y
CONFIG_AVERAGE=y
CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_LZMA=y
CONFIG_EMBEDDED=y
CONFIG_SLOB=y
CONFIG_JUMP_LABEL=y
# CONFIG_LBDAF is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_CLPS711X=y
CONFIG_ARCH_AUTCPU12=y
CONFIG_ARCH_CDB89712=y
CONFIG_ARCH_CLEP7312=y
CONFIG_ARCH_EDB7211=y
CONFIG_ARCH_P720T=y
CONFIG_ARCH_FORTUNET=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
# CONFIG_COREDUMP is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_IRDA=y
CONFIG_IRTTY_SIR=y
CONFIG_EP7211_DONGLE=y
# CONFIG_WIRELESS is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_AUTCPU12=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_GPIO=y
CONFIG_NETDEVICES=y
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
CONFIG_CS89x0=y
CONFIG_CS89x0_PLATFORM=y
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_CLPS711X_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_CLPS711X=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_PLATFORM=y
# CONFIG_USB_SUPPORT is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_CRAMFS=y
CONFIG_MINIX_FS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_CRC32 is not set
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_HOTPLUG is not set
CONFIG_ARCH_CLPS711X=y
CONFIG_ARCH_EDB7211=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
# CONFIG_INPUT is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_VT is not set
CONFIG_SERIAL_CLPS711X=y
CONFIG_SERIAL_CLPS711X_CONSOLE=y
CONFIG_EXT2_FS=y
CONFIG_MINIX_FS=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
CONFIG_DEBUG_USER=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_HOTPLUG is not set
CONFIG_ARCH_CLPS711X=y
CONFIG_ARCH_FORTUNET=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_FASTFPE=y
CONFIG_BINFMT_AOUT=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_MTD=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_BLK_DEV_RAM=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_CLPS711X=y
CONFIG_SERIAL_CLPS711X_CONSOLE=y
CONFIG_EXT2_FS=y
CONFIG_DEBUG_USER=y
......@@ -69,6 +69,8 @@ CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_RCAR=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
......
......@@ -80,6 +80,10 @@ CONFIG_RFKILL_GPIO=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_CMA=y
CONFIG_MTD=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_AD525X_DPOT=y
......@@ -98,12 +102,12 @@ CONFIG_USB_PEGASUS=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_BRCMFMAC=m
CONFIG_RT2X00=y
CONFIG_RT2800USB=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
......@@ -116,7 +120,8 @@ CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_TEGRA=y
CONFIG_SPI=y
CONFIG_SPI_TEGRA=y
CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
......@@ -138,6 +143,15 @@ CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_DRM=y
CONFIG_DRM_TEGRA=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
# CONFIG_SND_SUPPORT_OLD_API is not set
......@@ -205,6 +219,9 @@ CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
......
......@@ -50,12 +50,6 @@
#define SCPCELLID2 0xFF8
#define SCPCELLID3 0xFFC
#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15)
#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15)
#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17)
#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17)
#define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2))
static inline void sysctl_soft_reset(void __iomem *base)
......
......@@ -40,6 +40,13 @@ extern void iotable_init(struct map_desc *, int);
extern void vm_reserve_area_early(unsigned long addr, unsigned long size,
void *caller);
#ifdef CONFIG_DEBUG_LL
extern void debug_ll_addr(unsigned long *paddr, unsigned long *vaddr);
extern void debug_ll_io_init(void);
#else
static inline void debug_ll_io_init(void) {}
#endif
struct mem_type;
extern const struct mem_type *get_mem_type(unsigned int type);
/*
......
/*
* Early serial output macro for Allwinner A1X SoCs
*
* Copyright (C) 2012 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#if defined(CONFIG_DEBUG_SUNXI_UART0)
#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28000
#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28000
#elif defined(CONFIG_DEBUG_SUNXI_UART1)
#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28400
#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28400
#endif
.macro addruart, rp, rv, tmp
ldr \rp, =SUNXI_UART_DEBUG_PHYS_BASE
ldr \rv, =SUNXI_UART_DEBUG_VIRT_BASE
.endm
#define UART_SHIFT 2
#include <asm/hardware/debug-8250.S>
......@@ -100,6 +100,13 @@ ENTRY(printch)
b 1b
ENDPROC(printch)
ENTRY(debug_ll_addr)
addruart r2, r3, ip
str r2, [r0]
str r3, [r1]
mov pc, lr
ENDPROC(debug_ll_addr)
#else
ENTRY(printascii)
......@@ -119,4 +126,11 @@ ENTRY(printch)
mov pc, lr
ENDPROC(printch)
ENTRY(debug_ll_addr)
mov r2, #0
str r2, [r0]
str r2, [r1]
mov pc, lr
ENDPROC(debug_ll_addr)
#endif
......@@ -390,10 +390,8 @@ void __init twd_local_timer_of_register(void)
int err;
np = of_find_matching_node(NULL, twd_of_match);
if (!np) {
err = -ENODEV;
goto out;
}
if (!np)
return;
twd_ppi = irq_of_parse_and_map(np, 0);
if (!twd_ppi) {
......
config ARCH_BCM
bool "Broadcom SoC" if ARCH_MULTI_V7
depends on MMU
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_GIC
select CPU_V7
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select GENERIC_TIME
select GPIO_BCM
select SPARSE_IRQ
select TICK_ONESHOT
help
This enables support for system based on Broadcom SoCs.
It currently supports the 'BCM281XX' family, which includes
BCM11130, BCM11140, BCM11351, BCM28145 and
BCM28155 variants.
#
# Copyright (C) 2012 Broadcom Corporation
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation version 2.
#
# This program is distributed "as is" WITHOUT ANY WARRANTY of any
# kind, whether express or implied; without even the implied warranty
# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
obj-$(CONFIG_ARCH_BCM) := board_bcm.o
This diff is collapsed.
This diff is collapsed.
......@@ -10,7 +10,6 @@ config ARCH_AUTCPU12
config ARCH_CDB89712
bool "CDB89712"
select ISA
help
This is an evaluation board from Cirrus for the CS89712 processor.
The board includes 2 serial ports, Ethernet, IRDA, and expansion
......@@ -25,7 +24,6 @@ config ARCH_EDB7211
bool "EDB7211"
select ARCH_SELECT_MEMORY_MODEL
select ARCH_SPARSEMEM_ENABLE
select ISA
help
Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
evaluation board.
......
......@@ -9,9 +9,9 @@ obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_ARCH_AUTCPU12) += autcpu12.o
obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o
obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o
obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
obj-$(CONFIG_ARCH_P720T) += p720t.o
obj-$(CONFIG_ARCH_AUTCPU12) += board-autcpu12.o
obj-$(CONFIG_ARCH_CDB89712) += board-cdb89712.o
obj-$(CONFIG_ARCH_CLEP7312) += board-clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += board-edb7211.o
obj-$(CONFIG_ARCH_FORTUNET) += board-fortunet.o
obj-$(CONFIG_ARCH_P720T) += board-p720t.o
# The standard locations for stuff on CLPS711x type processors
zreladdr-y += 0xc0028000
params_phys-y := 0xc0000100
# Should probably have some agreement on these...
initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000
......
......@@ -33,14 +33,14 @@ fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi)
mi->bank[0].size = 0x01000000;
}
MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
/* Maintainer: Nobody */
.atag_offset = 0x0100,
.nr_irqs = CLPS711X_NR_IRQS,
.fixup = fixup_clep7312,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.handle_irq = clps711x_handle_irq,
.restart = clps711x_restart,
MACHINE_END
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment