Commit d0563dd3 authored by xingtong.wu's avatar xingtong.wu Committed by Hans de Goede

platform/x86/siemens: simatic-ipc-batt: fix bat reading in BX_21A

There was a case missing in a switch statement which lead to that model
not actually reading the GPIOs. That switch statement got simplified
now. Additionally on that model we need to initialize one pin
differently. As a drive-by finding also add a missing newline.

Fixes: 917f5434 ("platform/x86: simatic-ipc: add CMOS battery monitoring")
Reported-by: default avatarHenning Schild <henning.schild@siemens.com>
Signed-off-by: default avatarxingtong.wu <xingtong.wu@siemens.com>
Signed-off-by: default avatarHenning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20230728083651.19747-1-henning.schild@siemens.comReviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
parent 9bc289b8
......@@ -92,19 +92,14 @@ static long simatic_ipc_batt_read_value(struct device *dev)
next_update = priv.last_updated_jiffies + msecs_to_jiffies(BATT_DELAY_MS);
if (time_after(jiffies, next_update) || !priv.last_updated_jiffies) {
switch (priv.devmode) {
case SIMATIC_IPC_DEVICE_127E:
case SIMATIC_IPC_DEVICE_227G:
case SIMATIC_IPC_DEVICE_BX_39A:
priv.current_state = simatic_ipc_batt_read_gpio();
break;
case SIMATIC_IPC_DEVICE_227E:
if (priv.devmode == SIMATIC_IPC_DEVICE_227E)
priv.current_state = simatic_ipc_batt_read_io(dev);
break;
}
else
priv.current_state = simatic_ipc_batt_read_gpio();
priv.last_updated_jiffies = jiffies;
if (priv.current_state < SIMATIC_IPC_BATT_LEVEL_FULL)
dev_warn(dev, "CMOS battery needs to be replaced.");
dev_warn(dev, "CMOS battery needs to be replaced.\n");
}
return priv.current_state;
......@@ -163,6 +158,7 @@ int simatic_ipc_batt_probe(struct platform_device *pdev, struct gpiod_lookup_tab
struct simatic_ipc_platform *plat;
struct device *dev = &pdev->dev;
struct device *hwmon_dev;
unsigned long flags;
int err;
plat = pdev->dev.platform_data;
......@@ -196,7 +192,10 @@ int simatic_ipc_batt_probe(struct platform_device *pdev, struct gpiod_lookup_tab
}
if (table->table[2].key) {
priv.gpios[2] = devm_gpiod_get_index(dev, "CMOSBattery meter", 2, GPIOD_OUT_HIGH);
flags = GPIOD_OUT_HIGH;
if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A)
flags = GPIOD_OUT_LOW;
priv.gpios[2] = devm_gpiod_get_index(dev, "CMOSBattery meter", 2, flags);
if (IS_ERR(priv.gpios[2])) {
err = PTR_ERR(priv.gpios[1]);
priv.gpios[2] = NULL;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment