Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

John W. Linville says:

====================
This batch of fixes is intended for 3.6...

Johannes Berg gives us a pair of iwlwifi fixes.  One corrects some
improperly defined ifdefs that lead to crashes and BUG_ONs.  The other
prevents attempts to read SRAM for devices that aren't actually started.

Julia Lawall provides an ipw2100 fix to properly set the return code
from a function call before testing it! :-)

Thomas Huehn corrects the improper use of a constant related to a power
setting in ath5k.

Thomas Pedersen offers a mac80211 fix to properly handle destination
addresses of unicast frames passing though a mesh gate.

Vladimir Zapolskiy provides a brcmsmac fix to properly mark the
interface state when the device goes down.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/wireless/ath/ath5k/eeprom.c

@@ -1482,7 +1482,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode)
 	case AR5K_EEPROM_MODE_11A:
 		offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version);
 		rate_pcal_info = ee->ee_rate_tpwr_a;
-		ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN;
+		ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN;
 		break;
 	case AR5K_EEPROM_MODE_11B:
 		offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version);

drivers/net/wireless/ath/ath5k/eeprom.h

@@ -182,6 +182,7 @@
 #define AR5K_EEPROM_EEP_DELTA		10
 #define AR5K_EEPROM_N_MODES		3
 #define AR5K_EEPROM_N_5GHZ_CHAN		10
+#define AR5K_EEPROM_N_5GHZ_RATE_CHAN	8
 #define AR5K_EEPROM_N_2GHZ_CHAN		3
 #define AR5K_EEPROM_N_2GHZ_CHAN_2413	4
 #define	AR5K_EEPROM_N_2GHZ_CHAN_MAX	4

drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c

@@ -1233,6 +1233,9 @@ uint brcms_reset(struct brcms_info *wl)
 	/* dpc will not be rescheduled */
 	wl->resched = false;
 
+	/* inform publicly that interface is down */
+	wl->pub->up = false;
+
 	return 0;
 }
 

drivers/net/wireless/ipw2x00/ipw2100.c

@@ -2042,7 +2042,8 @@ static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
 		return;
 	}
 	len = ETH_ALEN;
-	ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len);
+	ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, bssid,
+				  &len);
 	if (ret) {
 		IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
 			       __LINE__);

drivers/net/wireless/iwlwifi/dvm/debugfs.c

@@ -124,6 +124,9 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file,
 	const struct fw_img *img;
 	size_t bufsz;
 
+	if (!iwl_is_ready_rf(priv))
+		return -EAGAIN;
+
 	/* default is to dump the entire data segment */
 	if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) {
 		priv->dbgfs_sram_offset = 0x800000;

drivers/net/wireless/iwlwifi/pcie/internal.h

@@ -350,7 +350,7 @@ int iwl_queue_space(const struct iwl_queue *q);
 /*****************************************************
 * Error handling
 ******************************************************/
-int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display);
+int iwl_dump_fh(struct iwl_trans *trans, char **buf);
 void iwl_dump_csr(struct iwl_trans *trans);
 
 /*****************************************************

drivers/net/wireless/iwlwifi/pcie/rx.c

@@ -555,7 +555,7 @@ static void iwl_irq_handle_error(struct iwl_trans *trans)
 	}
 
 	iwl_dump_csr(trans);
-	iwl_dump_fh(trans, NULL, false);
+	iwl_dump_fh(trans, NULL);
 
 	iwl_op_mode_nic_error(trans->op_mode);
 }

drivers/net/wireless/iwlwifi/pcie/trans.c

@@ -1649,13 +1649,9 @@ static const char *get_fh_string(int cmd)
 #undef IWL_CMD
 }
 
-int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display)
+int iwl_dump_fh(struct iwl_trans *trans, char **buf)
 {
 	int i;
-#ifdef CONFIG_IWLWIFI_DEBUG
-	int pos = 0;
-	size_t bufsz = 0;
-#endif
 	static const u32 fh_tbl[] = {
 		FH_RSCSR_CHNL0_STTS_WPTR_REG,
 		FH_RSCSR_CHNL0_RBDCB_BASE_REG,
@@ -1667,29 +1663,35 @@ int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display)
 		FH_TSSR_TX_STATUS_REG,
 		FH_TSSR_TX_ERROR_REG
 	};
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (display) {
-		bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	if (buf) {
+		int pos = 0;
+		size_t bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
+
 		*buf = kmalloc(bufsz, GFP_KERNEL);
 		if (!*buf)
 			return -ENOMEM;
+
 		pos += scnprintf(*buf + pos, bufsz - pos,
 				"FH register values:\n");
-		for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
+
+		for (i = 0; i < ARRAY_SIZE(fh_tbl); i++)
 			pos += scnprintf(*buf + pos, bufsz - pos,
 				"  %34s: 0X%08x\n",
 				get_fh_string(fh_tbl[i]),
 				iwl_read_direct32(trans, fh_tbl[i]));
-		}
+
 		return pos;
 	}
 #endif
+
 	IWL_ERR(trans, "FH register values:\n");
-	for (i = 0; i <  ARRAY_SIZE(fh_tbl); i++) {
+	for (i = 0; i <  ARRAY_SIZE(fh_tbl); i++)
 		IWL_ERR(trans, "  %34s: 0X%08x\n",
 			get_fh_string(fh_tbl[i]),
 			iwl_read_direct32(trans, fh_tbl[i]));
-	}
+
 	return 0;
 }
 
@@ -1982,11 +1984,11 @@ static ssize_t iwl_dbgfs_fh_reg_read(struct file *file,
 				     size_t count, loff_t *ppos)
 {
 	struct iwl_trans *trans = file->private_data;
-	char *buf;
+	char *buf = NULL;
 	int pos = 0;
 	ssize_t ret = -EFAULT;
 
-	ret = pos = iwl_dump_fh(trans, &buf, true);
+	ret = pos = iwl_dump_fh(trans, &buf);
 	if (buf) {
 		ret = simple_read_from_buffer(user_buf,
 					      count, ppos, buf, pos);

net/mac80211/tx.c

@@ -1811,37 +1811,31 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 			meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr,
 					sdata, NULL, NULL);
 		} else {
-			int is_mesh_mcast = 1;
-			const u8 *mesh_da;
-
-			if (is_multicast_ether_addr(skb->data))
-				/* DA TA mSA AE:SA */
-				mesh_da = skb->data;
-			else {
-				static const u8 bcast[ETH_ALEN] =
-					{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-				if (mppath) {
-					/* RA TA mDA mSA AE:DA SA */
+			/* DS -> MBSS (802.11-2012 13.11.3.3).
+			 * For unicast with unknown forwarding information,
+			 * destination might be in the MBSS or if that fails
+			 * forwarded to another mesh gate. In either case
+			 * resolution will be handled in ieee80211_xmit(), so
+			 * leave the original DA. This also works for mcast */
+			const u8 *mesh_da = skb->data;
+
+			if (mppath)
 				mesh_da = mppath->mpp;
-					is_mesh_mcast = 0;
-				} else if (mpath) {
+			else if (mpath)
 				mesh_da = mpath->dst;
-					is_mesh_mcast = 0;
-				} else {
-					/* DA TA mSA AE:SA */
-					mesh_da = bcast;
-				}
-			}
+			rcu_read_unlock();
+
 			hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc,
 					mesh_da, sdata->vif.addr);
-			rcu_read_unlock();
-			if (is_mesh_mcast)
+			if (is_multicast_ether_addr(mesh_da))
+				/* DA TA mSA AE:SA */
 				meshhdrlen =
 					ieee80211_new_mesh_header(&mesh_hdr,
 							sdata,
 							skb->data + ETH_ALEN,
 							NULL);
 			else
+				/* RA TA mDA mSA AE:DA SA */
 				meshhdrlen =
 					ieee80211_new_mesh_header(&mesh_hdr,
 							sdata,