drm/i915: Use enum pipe instead of crtc index to track active pipes

We may need to eliminate the crtc->index == pipe assumptions from
the code to support arbitrary pipes being fused off. Start that by
switching some bitmasks over to using pipe instead of the crtc index.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821173033.24123-1-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

drivers/gpu/drm/i915/display/intel_cdclk.c

@@ -2369,7 +2369,7 @@ static int vlv_modeset_calc_cdclk(struct intel_atomic_state *state)
 	state->cdclk.logical.voltage_level =
 		vlv_calc_voltage_level(dev_priv, cdclk);
 
-	if (!state->active_crtcs) {
+	if (!state->active_pipes) {
 		cdclk = vlv_calc_cdclk(dev_priv, state->cdclk.force_min_cdclk);
 
 		state->cdclk.actual.cdclk = cdclk;
@@ -2400,7 +2400,7 @@ static int bdw_modeset_calc_cdclk(struct intel_atomic_state *state)
 	state->cdclk.logical.voltage_level =
 		bdw_calc_voltage_level(cdclk);
 
-	if (!state->active_crtcs) {
+	if (!state->active_pipes) {
 		cdclk = bdw_calc_cdclk(state->cdclk.force_min_cdclk);
 
 		state->cdclk.actual.cdclk = cdclk;
@@ -2470,7 +2470,7 @@ static int skl_modeset_calc_cdclk(struct intel_atomic_state *state)
 	state->cdclk.logical.voltage_level =
 		skl_calc_voltage_level(cdclk);
 
-	if (!state->active_crtcs) {
+	if (!state->active_pipes) {
 		cdclk = skl_calc_cdclk(state->cdclk.force_min_cdclk, vco);
 
 		state->cdclk.actual.vco = vco;
@@ -2506,7 +2506,7 @@ static int bxt_modeset_calc_cdclk(struct intel_atomic_state *state)
 	state->cdclk.logical.voltage_level =
 		bxt_calc_voltage_level(cdclk);
 
-	if (!state->active_crtcs) {
+	if (!state->active_pipes) {
 		if (IS_GEMINILAKE(dev_priv)) {
 			cdclk = glk_calc_cdclk(state->cdclk.force_min_cdclk);
 			vco = glk_de_pll_vco(dev_priv, cdclk);
@@ -2544,7 +2544,7 @@ static int cnl_modeset_calc_cdclk(struct intel_atomic_state *state)
 		max(cnl_calc_voltage_level(cdclk),
 		    cnl_compute_min_voltage_level(state));
 
-	if (!state->active_crtcs) {
+	if (!state->active_pipes) {
 		cdclk = cnl_calc_cdclk(state->cdclk.force_min_cdclk);
 		vco = cnl_cdclk_pll_vco(dev_priv, cdclk);
 
@@ -2578,7 +2578,7 @@ static int icl_modeset_calc_cdclk(struct intel_atomic_state *state)
 		max(icl_calc_voltage_level(dev_priv, cdclk),
 		    cnl_compute_min_voltage_level(state));
 
-	if (!state->active_crtcs) {
+	if (!state->active_pipes) {
 		cdclk = icl_calc_cdclk(state->cdclk.force_min_cdclk, ref);
 		vco = icl_calc_cdclk_pll_vco(dev_priv, cdclk);
 

drivers/gpu/drm/i915/display/intel_display.c

@@ -7080,7 +7080,7 @@ static void intel_crtc_disable_noatomic(struct drm_crtc *crtc,
 		intel_display_power_put_unchecked(dev_priv, domain);
 	intel_crtc->enabled_power_domains = 0;
 
-	dev_priv->active_crtcs &= ~(1 << intel_crtc->pipe);
+	dev_priv->active_pipes &= ~BIT(intel_crtc->pipe);
 	dev_priv->min_cdclk[intel_crtc->pipe] = 0;
 	dev_priv->min_voltage_level[intel_crtc->pipe] = 0;
 
@@ -13452,7 +13452,7 @@ static int intel_modeset_checks(struct intel_atomic_state *state)
 		state->cdclk.force_min_cdclk = dev_priv->cdclk.force_min_cdclk;
 
 	state->modeset = true;
-	state->active_crtcs = dev_priv->active_crtcs;
+	state->active_pipes = dev_priv->active_pipes;
 	state->cdclk.logical = dev_priv->cdclk.logical;
 	state->cdclk.actual = dev_priv->cdclk.actual;
 	state->cdclk.pipe = INVALID_PIPE;
@@ -13460,12 +13460,12 @@ static int intel_modeset_checks(struct intel_atomic_state *state)
 	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
 					    new_crtc_state, i) {
 		if (new_crtc_state->base.active)
-			state->active_crtcs |= 1 << i;
+			state->active_pipes |= BIT(crtc->pipe);
 		else
-			state->active_crtcs &= ~(1 << i);
+			state->active_pipes &= ~BIT(crtc->pipe);
 
 		if (old_crtc_state->base.active != new_crtc_state->base.active)
-			state->active_pipe_changes |= drm_crtc_mask(&crtc->base);
+			state->active_pipe_changes |= BIT(crtc->pipe);
 	}
 
 	/*
@@ -13494,11 +13494,11 @@ static int intel_modeset_checks(struct intel_atomic_state *state)
 				return ret;
 		}
 
-		if (is_power_of_2(state->active_crtcs)) {
+		if (is_power_of_2(state->active_pipes)) {
 			struct intel_crtc *crtc;
 			struct intel_crtc_state *crtc_state;
 
-			pipe = ilog2(state->active_crtcs);
+			pipe = ilog2(state->active_pipes);
 			crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
 			crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
 			if (crtc_state && needs_modeset(crtc_state))
@@ -14191,7 +14191,7 @@ static int intel_atomic_commit(struct drm_device *dev,
 		       sizeof(state->min_cdclk));
 		memcpy(dev_priv->min_voltage_level, state->min_voltage_level,
 		       sizeof(state->min_voltage_level));
-		dev_priv->active_crtcs = state->active_crtcs;
+		dev_priv->active_pipes = state->active_pipes;
 		dev_priv->cdclk.force_min_cdclk = state->cdclk.force_min_cdclk;
 
 		intel_cdclk_swap_state(state);
@@ -16640,7 +16640,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 	struct drm_connector_list_iter conn_iter;
 	int i;
 
-	dev_priv->active_crtcs = 0;
+	dev_priv->active_pipes = 0;
 
 	for_each_intel_crtc(dev, crtc) {
 		struct intel_crtc_state *crtc_state =
@@ -16657,7 +16657,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 		crtc->active = crtc_state->base.active;
 
 		if (crtc_state->base.active)
-			dev_priv->active_crtcs |= 1 << crtc->pipe;
+			dev_priv->active_pipes |= BIT(crtc->pipe);
 
 		DRM_DEBUG_KMS("[CRTC:%d:%s] hw state readout: %s\n",
 			      crtc->base.base.id, crtc->base.name,

drivers/gpu/drm/i915/display/intel_display_types.h

@@ -481,9 +481,9 @@ struct intel_atomic_state {
 	 * but the converse is not necessarily true; simply changing a mode may
 	 * not flip the final active status of any CRTC's
 	 */
-	unsigned int active_pipe_changes;
+	u8 active_pipe_changes;
 
-	unsigned int active_crtcs;
+	u8 active_pipes;
 	/* minimum acceptable cdclk for each pipe */
 	int min_cdclk[I915_MAX_PIPES];
 	/* minimum acceptable voltage level for each pipe */

drivers/gpu/drm/i915/i915_drv.h

@@ -1468,7 +1468,7 @@ struct drm_i915_private {
 	 */
 	struct mutex dpll_lock;
 
-	unsigned int active_crtcs;
+	u8 active_pipes;
 	/* minimum acceptable cdclk for each pipe */
 	int min_cdclk[I915_MAX_PIPES];
 	/* minimum acceptable voltage level for each pipe */

drivers/gpu/drm/i915/intel_pm.c

@@ -3761,18 +3761,18 @@ bool intel_can_enable_sagv(struct intel_atomic_state *state)
 	/*
 	 * If there are no active CRTCs, no additional checks need be performed
 	 */
-	if (hweight32(state->active_crtcs) == 0)
+	if (hweight32(state->active_pipes) == 0)
 		return true;
 
 	/*
 	 * SKL+ workaround: bspec recommends we disable SAGV when we have
 	 * more then one pipe enabled
 	 */
-	if (hweight32(state->active_crtcs) > 1)
+	if (hweight32(state->active_pipes) > 1)
 		return false;
 
 	/* Since we're now guaranteed to only have one active CRTC... */
-	pipe = ffs(state->active_crtcs) - 1;
+	pipe = ffs(state->active_pipes) - 1;
 	crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
 	crtc_state = to_intel_crtc_state(crtc->base.state);
 
@@ -3867,14 +3867,14 @@ skl_ddb_get_pipe_allocation_limits(struct drm_i915_private *dev_priv,
 	if (WARN_ON(!state) || !crtc_state->base.active) {
 		alloc->start = 0;
 		alloc->end = 0;
-		*num_active = hweight32(dev_priv->active_crtcs);
+		*num_active = hweight32(dev_priv->active_pipes);
 		return;
 	}
 
 	if (intel_state->active_pipe_changes)
-		*num_active = hweight32(intel_state->active_crtcs);
+		*num_active = hweight32(intel_state->active_pipes);
 	else
-		*num_active = hweight32(dev_priv->active_crtcs);
+		*num_active = hweight32(dev_priv->active_pipes);
 
 	ddb_size = intel_get_ddb_size(dev_priv, crtc_state, total_data_rate,
 				      *num_active, ddb);
@@ -5464,7 +5464,7 @@ skl_ddb_add_affected_pipes(struct intel_atomic_state *state, bool *changed)
 	 * If this transaction isn't actually touching any CRTC's, don't
 	 * bother with watermark calculation.  Note that if we pass this
 	 * test, we're guaranteed to hold at least one CRTC state mutex,
-	 * which means we can safely use values like dev_priv->active_crtcs
+	 * which means we can safely use values like dev_priv->active_pipes
 	 * since any racing commits that want to update them would need to
 	 * hold _all_ CRTC state mutexes.
 	 */
@@ -5489,13 +5489,13 @@ skl_ddb_add_affected_pipes(struct intel_atomic_state *state, bool *changed)
 		state->active_pipe_changes = ~0;
 
 		/*
-		 * We usually only initialize state->active_crtcs if we
+		 * We usually only initialize state->active_pipes if we
 		 * we're doing a modeset; make sure this field is always
 		 * initialized during the sanitization process that happens
 		 * on the first commit too.
 		 */
 		if (!state->modeset)
-			state->active_crtcs = dev_priv->active_crtcs;
+			state->active_pipes = dev_priv->active_pipes;
 	}
 
 	/*
@@ -5811,7 +5811,7 @@ void skl_wm_get_hw_state(struct drm_i915_private *dev_priv)
 			hw->dirty_pipes |= drm_crtc_mask(&crtc->base);
 	}
 
-	if (dev_priv->active_crtcs) {
+	if (dev_priv->active_pipes) {
 		/* Fully recompute DDB on first atomic commit */
 		dev_priv->wm.distrust_bios_wm = true;
 	}