[POWERPC] EEH: rm un-needed data

The EEH event notification system passes around data that is
not needed or at least, not used properly. Stop passing this
data; get it in a more reliable fashion.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/platforms/pseries/eeh.c

@@ -346,7 +346,6 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	int rets[3];
 	unsigned long flags;
 	struct pci_dn *pdn;
-	enum pci_channel_state state;
 	int rc = 0;
 
 	total_mmio_ffs++;
@@ -452,12 +451,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	eeh_mark_slot (dn, EEH_MODE_ISOLATED);
 	spin_unlock_irqrestore(&confirm_error_lock, flags);
 
-	state = pci_channel_io_normal;
-	if ((rets[0] == 1) || (rets[0] == 2) || (rets[0] == 4))
-		state = pci_channel_io_frozen;
-	if (rets[0] == 5)
-		state = pci_channel_io_perm_failure;
-	eeh_send_failure_event (dn, dev, state, rets[2]);
+	eeh_send_failure_event (dn, dev);
 
 	/* Most EEH events are due to device driver bugs.  Having
 	 * a stack trace will help the device-driver authors figure

arch/powerpc/platforms/pseries/eeh_driver.c

@@ -342,13 +342,6 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 		return NULL;
 	}
 
-#if 0
-	/* We may get "permanent failure" messages on empty slots.
-	 * These are false alarms. Empty slots have no child dn. */
-	if ((event->state == pci_channel_io_perm_failure) && (frozen_device == NULL))
-		return;
-#endif
-
 	frozen_pdn = PCI_DN(frozen_dn);
 	frozen_pdn->eeh_freeze_count++;
 
@@ -363,12 +356,9 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 	if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES)
 		goto excess_failures;
 
-	/* If the reset state is a '5' and the time to reset is 0 (infinity)
-	 * or is more then 15 seconds, then mark this as a permanent failure.
-	 */
-	if ((event->state == pci_channel_io_perm_failure) &&
-	    ((event->time_unavail <= 0) ||
-	     (event->time_unavail > MAX_WAIT_FOR_RECOVERY*1000))) {
+	/* Get the current PCI slot state. */
+	rc = eeh_wait_for_slot_status (frozen_pdn, MAX_WAIT_FOR_RECOVERY*1000);
+	if (rc < 0) {
 		printk(KERN_WARNING "EEH: Permanent failure\n");
 		goto hard_fail;
 	}

arch/powerpc/platforms/pseries/eeh_event.c

@@ -118,9 +118,7 @@ static void eeh_thread_launcher(struct work_struct *dummy)
  * (from a workqueue).
  */
 int eeh_send_failure_event (struct device_node *dn,
-                            struct pci_dev *dev,
-                            enum pci_channel_state state,
-                            int time_unavail)
+                            struct pci_dev *dev)
 {
 	unsigned long flags;
 	struct eeh_event *event;
@@ -144,8 +142,6 @@ int eeh_send_failure_event (struct device_node *dn,
 
 	event->dn = dn;
 	event->dev = dev;
-	event->state = state;
-	event->time_unavail = time_unavail;
 
 	/* We may or may not be called in an interrupt context */
 	spin_lock_irqsave(&eeh_eventlist_lock, flags);

include/asm-powerpc/eeh_event.h

@@ -30,8 +30,6 @@ struct eeh_event {
 	struct list_head     list;
 	struct device_node 	*dn;   /* struct device node */
 	struct pci_dev       *dev;  /* affected device */
-	enum pci_channel_state state; /* PCI bus state for the affected device */
-	int time_unavail;    /* milliseconds until device might be available */
 };
 
 /**
@@ -46,9 +44,7 @@ struct eeh_event {
  * (from a workqueue).
  */
 int eeh_send_failure_event (struct device_node *dn,
-                            struct pci_dev *dev,
-                            enum pci_channel_state state,
-                            int time_unavail);
+                            struct pci_dev *dev);
 
 /* Main recovery function */
 struct pci_dn * handle_eeh_events (struct eeh_event *);