arm64: dts: mediatek: mt8183: Use interrupts-extended where possible

Change all instances of interrupt-parent + interrupts to one line
as interrupts-extended where possible across all MT8183 DTs to both
simplify and reduce code size.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi

@@ -11,8 +11,7 @@ da7219: da7219@1a {
 		pinctrl-0 = <&da7219_pins>;
 		compatible = "dlg,da7219";
 		reg = <0x1a>;
-		interrupt-parent = <&pio>;
-		interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>;
+		interrupts-extended = <&pio 165 IRQ_TYPE_LEVEL_LOW>;
 
 		dlg,micbias-lvl = <2600>;
 		dlg,mic-amp-in-sel = "diff";

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi

@@ -11,8 +11,7 @@ ts3a227e: ts3a227e@3b {
 		pinctrl-0 = <&ts3a227e_pins>;
 		compatible = "ti,ts3a227e";
 		reg = <0x3b>;
-		interrupt-parent = <&pio>;
-		interrupts = <157 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 157 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 	};
 };

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts

@@ -18,8 +18,7 @@ &touchscreen {
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts

@@ -30,8 +30,7 @@ &touchscreen {
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts

@@ -17,8 +17,7 @@ &touchscreen {
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts

@@ -17,8 +17,7 @@ &touchscreen {
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 

arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi

@@ -70,8 +70,7 @@ touchscreen: touchscreen@10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&open_touch>;
 
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
 
 		post-power-on-delay-ms = <10>;
 		hid-descr-addr = <0x0001>;

arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi

@@ -48,8 +48,7 @@ &i2c0 {
 	touchscreen: touchscreen@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&touch_default>;
 

arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi

@@ -54,8 +54,7 @@ touchscreen4: touchscreen@5d {
 		pinctrl-names = "default";
 		pinctrl-0 = <&open_touch>;
 
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
 
 		post-power-on-delay-ms = <10>;
 		hid-descr-addr = <0x0001>;

arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi

@@ -890,8 +890,7 @@ cr50@0 {
 		spi-max-frequency = <1000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&h1_int_od_l>;
-		interrupt-parent = <&pio>;
-		interrupts = <153 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&pio 153 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
@@ -918,8 +917,7 @@ cros_ec: cros-ec@0 {
 		compatible = "google,cros-ec-spi";
 		reg = <0>;
 		spi-max-frequency = <3000000>;
-		interrupt-parent = <&pio>;
-		interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 151 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ec_ap_int_odl>;