Commit d0ba3922 authored by Paul Walmsley's avatar Paul Walmsley Committed by paul

OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change

Program the SDRC_MR_0 register as well during SDRC clock changes.
This register allows selection of the memory CAS latency.  Some SDRAM
chips, such as the Qimonda HYB18M512160AF6, have a lower CAS latency
at lower clock rates.
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
parent c9812d04
...@@ -771,9 +771,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) ...@@ -771,9 +771,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
/* REVISIT: SRAM code doesn't support other M2 divisors yet */ /* REVISIT: SRAM code doesn't support other M2 divisors yet */
WARN_ON(new_div != 1 && new_div != 2); WARN_ON(new_div != 1 && new_div != 2);
/* REVISIT: Add SDRC_MR changing to this code also */
omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
sp->actim_ctrlb, new_div, unlock_dll, c); sp->actim_ctrlb, new_div, unlock_dll, c,
sp->mr);
return 0; return 0;
} }
......
...@@ -44,12 +44,14 @@ ...@@ -44,12 +44,14 @@
* SDRC rates < 83MHz * SDRC rates < 83MHz
* r5 = number of MPU cycles to wait for SDRC to stabilize after * r5 = number of MPU cycles to wait for SDRC to stabilize after
* reprogramming the SDRC when switching to a slower MPU speed * reprogramming the SDRC when switching to a slower MPU speed
* r6 = SDRC_MR_0 register value
* *
*/ */
ENTRY(omap3_sram_configure_core_dpll) ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack stmfd sp!, {r1-r12, lr} @ store regs to stack
ldr r4, [sp, #52] @ pull extra args off the stack ldr r4, [sp, #52] @ pull extra args off the stack
ldr r5, [sp, #56] @ load extra args from the stack ldr r5, [sp, #56] @ load extra args from the stack
ldr r6, [sp, #60] @ load extra args from the stack
dsb @ flush buffered writes to interconnect dsb @ flush buffered writes to interconnect
cmp r3, #0x2 cmp r3, #0x2
blne configure_sdrc blne configure_sdrc
...@@ -151,7 +153,9 @@ configure_sdrc: ...@@ -151,7 +153,9 @@ configure_sdrc:
str r1, [r11] str r1, [r11]
ldr r11, omap3_sdrc_actim_ctrlb ldr r11, omap3_sdrc_actim_ctrlb
str r2, [r11] str r2, [r11]
ldr r2, [r11] @ posted-write barrier for SDRC ldr r11, omap3_sdrc_mr_0
str r6, [r11]
ldr r6, [r11] @ posted-write barrier for SDRC
bx lr bx lr
omap3_sdrc_power: omap3_sdrc_power:
...@@ -168,6 +172,8 @@ omap3_sdrc_actim_ctrla: ...@@ -168,6 +172,8 @@ omap3_sdrc_actim_ctrla:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0) .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
omap3_sdrc_actim_ctrlb: omap3_sdrc_actim_ctrlb:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0) .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
omap3_sdrc_mr_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
omap3_sdrc_dlla_status: omap3_sdrc_dlla_status:
.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
omap3_sdrc_dlla_ctrl: omap3_sdrc_dlla_ctrl:
......
...@@ -24,7 +24,7 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); ...@@ -24,7 +24,7 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb, u32 m2, u32 sdrc_actim_ctrlb, u32 m2,
u32 unlock_dll, u32 f); u32 unlock_dll, u32 f, u32 sdrc_mr);
/* Do not use these */ /* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
...@@ -62,7 +62,7 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz; ...@@ -62,7 +62,7 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz;
extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb, u32 m2, u32 sdrc_actim_ctrlb, u32 m2,
u32 unlock_dll, u32 f); u32 unlock_dll, u32 f, u32 sdrc_mr);
extern unsigned long omap3_sram_configure_core_dpll_sz; extern unsigned long omap3_sram_configure_core_dpll_sz;
#endif #endif
...@@ -372,16 +372,16 @@ static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, ...@@ -372,16 +372,16 @@ static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb, u32 sdrc_actim_ctrlb,
u32 m2, u32 unlock_dll, u32 m2, u32 unlock_dll,
u32 f); u32 f, u32 sdrc_mr);
u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll, u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll,
u32 f) u32 f, u32 sdrc_mr)
{ {
BUG_ON(!_omap3_sram_configure_core_dpll); BUG_ON(!_omap3_sram_configure_core_dpll);
return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
sdrc_actim_ctrla, sdrc_actim_ctrla,
sdrc_actim_ctrlb, m2, sdrc_actim_ctrlb, m2,
unlock_dll, f); unlock_dll, f, sdrc_mr);
} }
/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment