phy: qcom-qmp-pcie-msm8996: drop unused secondary init tables

Drop the secondary register initialisation tables which aren't used by
this driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220907110728.19092-14-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c

@@ -196,24 +196,14 @@ struct qmp_phy_cfg {
 	/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
 	const struct qmp_phy_init_tbl *serdes_tbl;
 	int serdes_tbl_num;
-	const struct qmp_phy_init_tbl *serdes_tbl_sec;
-	int serdes_tbl_num_sec;
 	const struct qmp_phy_init_tbl *tx_tbl;
 	int tx_tbl_num;
-	const struct qmp_phy_init_tbl *tx_tbl_sec;
-	int tx_tbl_num_sec;
 	const struct qmp_phy_init_tbl *rx_tbl;
 	int rx_tbl_num;
-	const struct qmp_phy_init_tbl *rx_tbl_sec;
-	int rx_tbl_num_sec;
 	const struct qmp_phy_init_tbl *pcs_tbl;
 	int pcs_tbl_num;
-	const struct qmp_phy_init_tbl *pcs_tbl_sec;
-	int pcs_tbl_num_sec;
 	const struct qmp_phy_init_tbl *pcs_misc_tbl;
 	int pcs_misc_tbl_num;
-	const struct qmp_phy_init_tbl *pcs_misc_tbl_sec;
-	int pcs_misc_tbl_num_sec;
 
 	/* clock ids to be requested */
 	const char * const *clk_list;
@@ -409,10 +399,6 @@ static int qcom_qmp_phy_pcie_msm8996_serdes_init(struct qmp_phy *qphy)
 	int ret;
 
 	qcom_qmp_phy_pcie_msm8996_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
-	if (cfg->serdes_tbl_sec)
-		qcom_qmp_phy_pcie_msm8996_configure(serdes, cfg->regs, cfg->serdes_tbl_sec,
-				       cfg->serdes_tbl_num_sec);
-
 
 	qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
 	qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
@@ -560,26 +546,14 @@ static int qcom_qmp_phy_pcie_msm8996_power_on(struct phy *phy)
 	/* Tx, Rx, and PCS configurations */
 	qcom_qmp_phy_pcie_msm8996_configure_lane(tx, cfg->regs,
 				    cfg->tx_tbl, cfg->tx_tbl_num, 1);
-	if (cfg->tx_tbl_sec)
-		qcom_qmp_phy_pcie_msm8996_configure_lane(tx, cfg->regs, cfg->tx_tbl_sec,
-					    cfg->tx_tbl_num_sec, 1);
 
 	qcom_qmp_phy_pcie_msm8996_configure_lane(rx, cfg->regs,
 				    cfg->rx_tbl, cfg->rx_tbl_num, 1);
-	if (cfg->rx_tbl_sec)
-		qcom_qmp_phy_pcie_msm8996_configure_lane(rx, cfg->regs,
-					    cfg->rx_tbl_sec, cfg->rx_tbl_num_sec, 1);
 
 	qcom_qmp_phy_pcie_msm8996_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
-	if (cfg->pcs_tbl_sec)
-		qcom_qmp_phy_pcie_msm8996_configure(pcs, cfg->regs, cfg->pcs_tbl_sec,
-				       cfg->pcs_tbl_num_sec);
 
 	qcom_qmp_phy_pcie_msm8996_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
 			       cfg->pcs_misc_tbl_num);
-	if (cfg->pcs_misc_tbl_sec)
-		qcom_qmp_phy_pcie_msm8996_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec,
-				       cfg->pcs_misc_tbl_num_sec);
 
 	/*
 	 * Pull out PHY from POWER DOWN state.