Skip to content

L
linux
Commit d0f482bb authored by Steen Hegelund's avatar Steen Hegelund Committed by David S. Miller
Browse files
Options

arm64: dts: sparx5: Add the Sparx5 switch node 

This provides the configuration for the currently available evaluation
boards PCB134 and PCB135.

The series depends on the following series currently on its way
into the kernel:

- Sparx5 Reset Driver
  Link: https://lore.kernel.org/r/20210416084054.2922327-1-steen.hegelund@microchip.com/Signed-off-by: default avatarSteen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: default avatarLars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: default avatarBjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent af4b1102
Show whitespace changes
Inline Side-by-side
Showing with 1112 additions and 84 deletions
arch/arm64/boot/dts/microchip/sparx5.dtsi
View file @ d0f482bb
......@@ -135,9 +135,12 @@ mux: mux-controller {
};
};
reset@611010008 {
compatible = "microchip,sparx5-chip-reset";
reset: reset-controller@611010008 {
compatible = "microchip,sparx5-switch-reset";
reg = <0x6 0x11010008 0x4>;
reg-names = "gcb";
#reset-cells = <1>;
cpu-syscon = <&cpu_ctrl>;
};
uart0: serial@600100000 {
......@@ -275,6 +278,21 @@ emmc_pins: emmc-pins {
"GPIO_46", "GPIO_47";
function = "emmc";
};
miim1_pins: miim1-pins {
pins = "GPIO_56", "GPIO_57";
function = "miim";
};
miim2_pins: miim2-pins {
pins = "GPIO_58", "GPIO_59";
function = "miim";
};
miim3_pins: miim3-pins {
pins = "GPIO_52", "GPIO_53";
function = "miim";
};
};
sgpio0: gpio@61101036c {
......@@ -285,6 +303,8 @@ sgpio0: gpio@61101036c {
clocks = <&sys_clk>;
pinctrl-0 = <&sgpio0_pins>;
pinctrl-names = "default";
resets = <&reset 0>;
reset-names = "switch";
reg = <0x6 0x1101036c 0x100>;
sgpio_in0: gpio@0 {
compatible = "microchip,sparx5-sgpio-bank";
......@@ -292,6 +312,9 @@ sgpio_in0: gpio@0 {
gpio-controller;
#gpio-cells = <3>;
ngpios = <96>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
};
sgpio_out0: gpio@1 {
compatible = "microchip,sparx5-sgpio-bank";
......@@ -310,6 +333,8 @@ sgpio1: gpio@611010484 {
clocks = <&sys_clk>;
pinctrl-0 = <&sgpio1_pins>;
pinctrl-names = "default";
resets = <&reset 0>;
reset-names = "switch";
reg = <0x6 0x11010484 0x100>;
sgpio_in1: gpio@0 {
compatible = "microchip,sparx5-sgpio-bank";
......@@ -317,6 +342,9 @@ sgpio_in1: gpio@0 {
gpio-controller;
#gpio-cells = <3>;
ngpios = <96>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
};
sgpio_out1: gpio@1 {
compatible = "microchip,sparx5-sgpio-bank";
......@@ -335,6 +363,8 @@ sgpio2: gpio@61101059c {
clocks = <&sys_clk>;
pinctrl-0 = <&sgpio2_pins>;
pinctrl-names = "default";
resets = <&reset 0>;
reset-names = "switch";
reg = <0x6 0x1101059c 0x100>;
sgpio_in2: gpio@0 {
reg = <0>;
......@@ -342,6 +372,9 @@ sgpio_in2: gpio@0 {
gpio-controller;
#gpio-cells = <3>;
ngpios = <96>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
};
sgpio_out2: gpio@1 {
compatible = "microchip,sparx5-sgpio-bank";
......@@ -386,5 +419,62 @@ tmon0: tmon@610508110 {
#thermal-sensor-cells = <0>;
clocks = <&ahb_clk>;
};
mdio0: mdio@6110102b0 {
compatible = "mscc,ocelot-miim";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x6 0x110102b0 0x24>;
};
mdio1: mdio@6110102d4 {
compatible = "mscc,ocelot-miim";
status = "disabled";
pinctrl-0 = <&miim1_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x6 0x110102d4 0x24>;
};
mdio2: mdio@6110102f8 {
compatible = "mscc,ocelot-miim";
status = "disabled";
pinctrl-0 = <&miim2_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x6 0x110102d4 0x24>;
};
mdio3: mdio@61101031c {
compatible = "mscc,ocelot-miim";
status = "disabled";
pinctrl-0 = <&miim3_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x6 0x1101031c 0x24>;
};
serdes: serdes@10808000 {
compatible = "microchip,sparx5-serdes";
#phy-cells = <1>;
clocks = <&sys_clk>;
reg = <0x6 0x10808000 0x5d0000>;
};
switch: switch@0x600000000 {
compatible = "microchip,sparx5-switch";
reg = <0x6 0 0x401000>,
<0x6 0x10004000 0x7fc000>,
<0x6 0x11010000 0xaf0000>;
reg-names = "cpu", "dev", "gcb";
interrupt-names = "xtr";
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
resets = <&reset 0>;
reset-names = "switch";
};
};
};
arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
View file @ d0f482bb
......@@ -7,30 +7,6 @@
#include "sparx5_pcb_common.dtsi"
/{
aliases {
i2c0 = &i2c0;
i2c100 = &i2c100;
i2c101 = &i2c101;
i2c102 = &i2c102;
i2c103 = &i2c103;
i2c104 = &i2c104;
i2c105 = &i2c105;
i2c106 = &i2c106;
i2c107 = &i2c107;
i2c108 = &i2c108;
i2c109 = &i2c109;
i2c110 = &i2c110;
i2c111 = &i2c111;
i2c112 = &i2c112;
i2c113 = &i2c113;
i2c114 = &i2c114;
i2c115 = &i2c115;
i2c116 = &i2c116;
i2c117 = &i2c117;
i2c118 = &i2c118;
i2c119 = &i2c119;
};
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
......@@ -298,17 +274,10 @@ gpio@1 {
&spi0 {
status = "okay";
spi@0 {
compatible = "spi-mux";
mux-controls = <&mux>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0>; /* CS0 */
spi-flash@9 {
spi-flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <8000000>;
reg = <0x9>; /* SPI */
};
reg = <0>;
};
};
......@@ -328,6 +297,33 @@ spi-flash@9 {
};
};
&sgpio0 {
status = "okay";
microchip,sgpio-port-ranges = <8 15>;
gpio@0 {
ngpios = <64>;
};
gpio@1 {
ngpios = <64>;
};
};
&sgpio1 {
status = "okay";
microchip,sgpio-port-ranges = <24 31>;
gpio@0 {
ngpios = <64>;
};
gpio@1 {
ngpios = <64>;
};
};
&sgpio2 {
status = "okay";
microchip,sgpio-port-ranges = <0 0>, <11 31>;
};
&gpio {
i2cmux_pins_i: i2cmux-pins-i {
pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",
......@@ -415,9 +411,9 @@ i2c0_emux: i2c0-emux@0 {
&i2c0_imux {
pinctrl-names =
"i2c100", "i2c101", "i2c102", "i2c103",
"i2c104", "i2c105", "i2c106", "i2c107",
"i2c108", "i2c109", "i2c110", "i2c111", "idle";
"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
"i2c_sfp5", "i2c_sfp6", "i2c_sfp7", "i2c_sfp8",
"i2c_sfp9", "i2c_sfp10", "i2c_sfp11", "i2c_sfp12", "idle";
pinctrl-0 = <&i2cmux_0>;
pinctrl-1 = <&i2cmux_1>;
pinctrl-2 = <&i2cmux_2>;
......@@ -431,62 +427,62 @@ &i2c0_imux {
pinctrl-10 = <&i2cmux_10>;
pinctrl-11 = <&i2cmux_11>;
pinctrl-12 = <&i2cmux_pins_i>;
i2c100: i2c_sfp1 {
i2c_sfp1: i2c_sfp1 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c101: i2c_sfp2 {
i2c_sfp2: i2c_sfp2 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c102: i2c_sfp3 {
i2c_sfp3: i2c_sfp3 {
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c103: i2c_sfp4 {
i2c_sfp4: i2c_sfp4 {
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c104: i2c_sfp5 {
i2c_sfp5: i2c_sfp5 {
reg = <0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c105: i2c_sfp6 {
i2c_sfp6: i2c_sfp6 {
reg = <0x5>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c106: i2c_sfp7 {
i2c_sfp7: i2c_sfp7 {
reg = <0x6>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c107: i2c_sfp8 {
i2c_sfp8: i2c_sfp8 {
reg = <0x7>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c108: i2c_sfp9 {
i2c_sfp9: i2c_sfp9 {
reg = <0x8>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c109: i2c_sfp10 {
i2c_sfp10: i2c_sfp10 {
reg = <0x9>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c110: i2c_sfp11 {
i2c_sfp11: i2c_sfp11 {
reg = <0xa>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c111: i2c_sfp12 {
i2c_sfp12: i2c_sfp12 {
reg = <0xb>;
#address-cells = <1>;
#size-cells = <0>;
......@@ -499,44 +495,413 @@ &gpio 60 GPIO_ACTIVE_HIGH
&gpio 61 GPIO_ACTIVE_HIGH
&gpio 54 GPIO_ACTIVE_HIGH>;
idle-state = <0x8>;
i2c112: i2c_sfp13 {
i2c_sfp13: i2c_sfp13 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c113: i2c_sfp14 {
i2c_sfp14: i2c_sfp14 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c114: i2c_sfp15 {
i2c_sfp15: i2c_sfp15 {
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c115: i2c_sfp16 {
i2c_sfp16: i2c_sfp16 {
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c116: i2c_sfp17 {
i2c_sfp17: i2c_sfp17 {
reg = <0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c117: i2c_sfp18 {
i2c_sfp18: i2c_sfp18 {
reg = <0x5>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c118: i2c_sfp19 {
i2c_sfp19: i2c_sfp19 {
reg = <0x6>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c119: i2c_sfp20 {
i2c_sfp20: i2c_sfp20 {
reg = <0x7>;
#address-cells = <1>;
#size-cells = <0>;
};
};
&mdio3 {
status = "ok";
phy64: ethernet-phy@64 {
reg = <28>;
};
};
&axi {
sfp_eth12: sfp-eth12 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp1>;
tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth13: sfp-eth13 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp2>;
tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth14: sfp-eth14 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp3>;
tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth15: sfp-eth15 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp4>;
tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth48: sfp-eth48 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp5>;
tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth49: sfp-eth49 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp6>;
tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth50: sfp-eth50 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp7>;
tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth51: sfp-eth51 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp8>;
tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth52: sfp-eth52 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp9>;
tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth53: sfp-eth53 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp10>;
tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth54: sfp-eth54 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp11>;
tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth55: sfp-eth55 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp12>;
tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth56: sfp-eth56 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp13>;
tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth57: sfp-eth57 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp14>;
tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth58: sfp-eth58 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp15>;
tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth59: sfp-eth59 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp16>;
tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth60: sfp-eth60 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp17>;
tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth61: sfp-eth61 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp18>;
tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth62: sfp-eth62 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp19>;
tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth63: sfp-eth63 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp20>;
tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
};
};
&switch {
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
/* 10G SFPs */
port12: port@12 {
reg = <12>;
microchip,bandwidth = <10000>;
phys = <&serdes 13>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth12>;
microchip,sd-sgpio = <301>;
managed = "in-band-status";
};
port13: port@13 {
reg = <13>;
/* Example: CU SFP, 1G speed */
microchip,bandwidth = <10000>;
phys = <&serdes 14>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth13>;
microchip,sd-sgpio = <305>;
managed = "in-band-status";
};
port14: port@14 {
reg = <14>;
microchip,bandwidth = <10000>;
phys = <&serdes 15>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth14>;
microchip,sd-sgpio = <309>;
managed = "in-band-status";
};
port15: port@15 {
reg = <15>;
microchip,bandwidth = <10000>;
phys = <&serdes 16>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth15>;
microchip,sd-sgpio = <313>;
managed = "in-band-status";
};
port48: port@48 {
reg = <48>;
microchip,bandwidth = <10000>;
phys = <&serdes 17>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth48>;
microchip,sd-sgpio = <317>;
managed = "in-band-status";
};
port49: port@49 {
reg = <49>;
microchip,bandwidth = <10000>;
phys = <&serdes 18>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth49>;
microchip,sd-sgpio = <321>;
managed = "in-band-status";
};
port50: port@50 {
reg = <50>;
microchip,bandwidth = <10000>;
phys = <&serdes 19>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth50>;
microchip,sd-sgpio = <325>;
managed = "in-band-status";
};
port51: port@51 {
reg = <51>;
microchip,bandwidth = <10000>;
phys = <&serdes 20>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth51>;
microchip,sd-sgpio = <329>;
managed = "in-band-status";
};
port52: port@52 {
reg = <52>;
microchip,bandwidth = <10000>;
phys = <&serdes 21>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth52>;
microchip,sd-sgpio = <333>;
managed = "in-band-status";
};
port53: port@53 {
reg = <53>;
microchip,bandwidth = <10000>;
phys = <&serdes 22>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth53>;
microchip,sd-sgpio = <337>;
managed = "in-band-status";
};
port54: port@54 {
reg = <54>;
microchip,bandwidth = <10000>;
phys = <&serdes 23>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth54>;
microchip,sd-sgpio = <341>;
managed = "in-band-status";
};
port55: port@55 {
reg = <55>;
microchip,bandwidth = <10000>;
phys = <&serdes 24>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth55>;
microchip,sd-sgpio = <345>;
managed = "in-band-status";
};
/* 25G SFPs */
port56: port@56 {
reg = <56>;
microchip,bandwidth = <10000>;
phys = <&serdes 25>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth56>;
microchip,sd-sgpio = <349>;
managed = "in-band-status";
};
port57: port@57 {
reg = <57>;
microchip,bandwidth = <10000>;
phys = <&serdes 26>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth57>;
microchip,sd-sgpio = <353>;
managed = "in-band-status";
};
port58: port@58 {
reg = <58>;
microchip,bandwidth = <10000>;
phys = <&serdes 27>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth58>;
microchip,sd-sgpio = <357>;
managed = "in-band-status";
};
port59: port@59 {
reg = <59>;
microchip,bandwidth = <10000>;
phys = <&serdes 28>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth59>;
microchip,sd-sgpio = <361>;
managed = "in-band-status";
};
port60: port@60 {
reg = <60>;
microchip,bandwidth = <10000>;
phys = <&serdes 29>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth60>;
microchip,sd-sgpio = <365>;
managed = "in-band-status";
};
port61: port@61 {
reg = <61>;
microchip,bandwidth = <10000>;
phys = <&serdes 30>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth61>;
microchip,sd-sgpio = <369>;
managed = "in-band-status";
};
port62: port@62 {
reg = <62>;
microchip,bandwidth = <10000>;
phys = <&serdes 31>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth62>;
microchip,sd-sgpio = <373>;
managed = "in-band-status";
};
port63: port@63 {
reg = <63>;
microchip,bandwidth = <10000>;
phys = <&serdes 32>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth63>;
microchip,sd-sgpio = <377>;
managed = "in-band-status";
};
/* Finally the Management interface */
port64: port@64 {
reg = <64>;
microchip,bandwidth = <1000>;
phys = <&serdes 0>;
phy-handle = <&phy64>;
phy-mode = "sgmii";
};
};
};
arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
View file @ d0f482bb
......@@ -7,14 +7,6 @@
#include "sparx5_pcb_common.dtsi"
/{
aliases {
i2c0 = &i2c0;
i2c152 = &i2c152;
i2c153 = &i2c153;
i2c154 = &i2c154;
i2c155 = &i2c155;
};
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
......@@ -97,17 +89,10 @@ i2cmux_s32: i2cmux-3 {
&spi0 {
status = "okay";
spi@0 {
compatible = "spi-mux";
mux-controls = <&mux>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0>; /* CS0 */
spi-flash@9 {
spi-flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <8000000>;
reg = <0x9>; /* SPI */
};
reg = <0>;
};
};
......@@ -138,6 +123,11 @@ gpio@1 {
};
};
&sgpio2 {
status = "okay";
microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
};
&axi {
i2c0_imux: i2c0-imux@0 {
compatible = "i2c-mux-pinctrl";
......@@ -149,31 +139,614 @@ i2c0_imux: i2c0-imux@0 {
&i2c0_imux {
pinctrl-names =
"i2c152", "i2c153", "i2c154", "i2c155",
"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
"idle";
pinctrl-0 = <&i2cmux_s29>;
pinctrl-1 = <&i2cmux_s30>;
pinctrl-2 = <&i2cmux_s31>;
pinctrl-3 = <&i2cmux_s32>;
pinctrl-4 = <&i2cmux_pins_i>;
i2c152: i2c_sfp1 {
i2c_sfp1: i2c_sfp1 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c153: i2c_sfp2 {
i2c_sfp2: i2c_sfp2 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c154: i2c_sfp3 {
i2c_sfp3: i2c_sfp3 {
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c155: i2c_sfp4 {
i2c_sfp4: i2c_sfp4 {
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
};
};
&axi {
sfp_eth60: sfp-eth60 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp1>;
tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth61: sfp-eth61 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp2>;
tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth62: sfp-eth62 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp3>;
tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth63: sfp-eth63 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp4>;
tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
};
};
&mdio0 {
status = "ok";
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
phy2: ethernet-phy@2 {
reg = <2>;
};
phy3: ethernet-phy@3 {
reg = <3>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
phy5: ethernet-phy@5 {
reg = <5>;
};
phy6: ethernet-phy@6 {
reg = <6>;
};
phy7: ethernet-phy@7 {
reg = <7>;
};
phy8: ethernet-phy@8 {
reg = <8>;
};
phy9: ethernet-phy@9 {
reg = <9>;
};
phy10: ethernet-phy@10 {
reg = <10>;
};
phy11: ethernet-phy@11 {
reg = <11>;
};
phy12: ethernet-phy@12 {
reg = <12>;
};
phy13: ethernet-phy@13 {
reg = <13>;
};
phy14: ethernet-phy@14 {
reg = <14>;
};
phy15: ethernet-phy@15 {
reg = <15>;
};
phy16: ethernet-phy@16 {
reg = <16>;
};
phy17: ethernet-phy@17 {
reg = <17>;
};
phy18: ethernet-phy@18 {
reg = <18>;
};
phy19: ethernet-phy@19 {
reg = <19>;
};
phy20: ethernet-phy@20 {
reg = <20>;
};
phy21: ethernet-phy@21 {
reg = <21>;
};
phy22: ethernet-phy@22 {
reg = <22>;
};
phy23: ethernet-phy@23 {
reg = <23>;
};
};
&mdio1 {
status = "ok";
phy24: ethernet-phy@24 {
reg = <0>;
};
phy25: ethernet-phy@25 {
reg = <1>;
};
phy26: ethernet-phy@26 {
reg = <2>;
};
phy27: ethernet-phy@27 {
reg = <3>;
};
phy28: ethernet-phy@28 {
reg = <4>;
};
phy29: ethernet-phy@29 {
reg = <5>;
};
phy30: ethernet-phy@30 {
reg = <6>;
};
phy31: ethernet-phy@31 {
reg = <7>;
};
phy32: ethernet-phy@32 {
reg = <8>;
};
phy33: ethernet-phy@33 {
reg = <9>;
};
phy34: ethernet-phy@34 {
reg = <10>;
};
phy35: ethernet-phy@35 {
reg = <11>;
};
phy36: ethernet-phy@36 {
reg = <12>;
};
phy37: ethernet-phy@37 {
reg = <13>;
};
phy38: ethernet-phy@38 {
reg = <14>;
};
phy39: ethernet-phy@39 {
reg = <15>;
};
phy40: ethernet-phy@40 {
reg = <16>;
};
phy41: ethernet-phy@41 {
reg = <17>;
};
phy42: ethernet-phy@42 {
reg = <18>;
};
phy43: ethernet-phy@43 {
reg = <19>;
};
phy44: ethernet-phy@44 {
reg = <20>;
};
phy45: ethernet-phy@45 {
reg = <21>;
};
phy46: ethernet-phy@46 {
reg = <22>;
};
phy47: ethernet-phy@47 {
reg = <23>;
};
};
&mdio3 {
status = "ok";
phy64: ethernet-phy@64 {
reg = <28>;
};
};
&switch {
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port0: port@0 {
reg = <0>;
microchip,bandwidth = <1000>;
phys = <&serdes 13>;
phy-handle = <&phy0>;
phy-mode = "qsgmii";
};
port1: port@1 {
reg = <1>;
microchip,bandwidth = <1000>;
phys = <&serdes 13>;
phy-handle = <&phy1>;
phy-mode = "qsgmii";
};
port2: port@2 {
reg = <2>;
microchip,bandwidth = <1000>;
phys = <&serdes 13>;
phy-handle = <&phy2>;
phy-mode = "qsgmii";
};
port3: port@3 {
reg = <3>;
microchip,bandwidth = <1000>;
phys = <&serdes 13>;
phy-handle = <&phy3>;
phy-mode = "qsgmii";
};
port4: port@4 {
reg = <4>;
microchip,bandwidth = <1000>;
phys = <&serdes 14>;
phy-handle = <&phy4>;
phy-mode = "qsgmii";
};
port5: port@5 {
reg = <5>;
microchip,bandwidth = <1000>;
phys = <&serdes 14>;
phy-handle = <&phy5>;
phy-mode = "qsgmii";
};
port6: port@6 {
reg = <6>;
microchip,bandwidth = <1000>;
phys = <&serdes 14>;
phy-handle = <&phy6>;
phy-mode = "qsgmii";
};
port7: port@7 {
reg = <7>;
microchip,bandwidth = <1000>;
phys = <&serdes 14>;
phy-handle = <&phy7>;
phy-mode = "qsgmii";
};
port8: port@8 {
reg = <8>;
microchip,bandwidth = <1000>;
phys = <&serdes 15>;
phy-handle = <&phy8>;
phy-mode = "qsgmii";
};
port9: port@9 {
reg = <9>;
microchip,bandwidth = <1000>;
phys = <&serdes 15>;
phy-handle = <&phy9>;
phy-mode = "qsgmii";
};
port10: port@10 {
reg = <10>;
microchip,bandwidth = <1000>;
phys = <&serdes 15>;
phy-handle = <&phy10>;
phy-mode = "qsgmii";
};
port11: port@11 {
reg = <11>;
microchip,bandwidth = <1000>;
phys = <&serdes 15>;
phy-handle = <&phy11>;
phy-mode = "qsgmii";
};
port12: port@12 {
reg = <12>;
microchip,bandwidth = <1000>;
phys = <&serdes 16>;
phy-handle = <&phy12>;
phy-mode = "qsgmii";
};
port13: port@13 {
reg = <13>;
microchip,bandwidth = <1000>;
phys = <&serdes 16>;
phy-handle = <&phy13>;
phy-mode = "qsgmii";
};
port14: port@14 {
reg = <14>;
microchip,bandwidth = <1000>;
phys = <&serdes 16>;
phy-handle = <&phy14>;
phy-mode = "qsgmii";
};
port15: port@15 {
reg = <15>;
microchip,bandwidth = <1000>;
phys = <&serdes 16>;
phy-handle = <&phy15>;
phy-mode = "qsgmii";
};
port16: port@16 {
reg = <16>;
microchip,bandwidth = <1000>;
phys = <&serdes 17>;
phy-handle = <&phy16>;
phy-mode = "qsgmii";
};
port17: port@17 {
reg = <17>;
microchip,bandwidth = <1000>;
phys = <&serdes 17>;
phy-handle = <&phy17>;
phy-mode = "qsgmii";
};
port18: port@18 {
reg = <18>;
microchip,bandwidth = <1000>;
phys = <&serdes 17>;
phy-handle = <&phy18>;
phy-mode = "qsgmii";
};
port19: port@19 {
reg = <19>;
microchip,bandwidth = <1000>;
phys = <&serdes 17>;
phy-handle = <&phy19>;
phy-mode = "qsgmii";
};
port20: port@20 {
reg = <20>;
microchip,bandwidth = <1000>;
phys = <&serdes 18>;
phy-handle = <&phy20>;
phy-mode = "qsgmii";
};
port21: port@21 {
reg = <21>;
microchip,bandwidth = <1000>;
phys = <&serdes 18>;
phy-handle = <&phy21>;
phy-mode = "qsgmii";
};
port22: port@22 {
reg = <22>;
microchip,bandwidth = <1000>;
phys = <&serdes 18>;
phy-handle = <&phy22>;
phy-mode = "qsgmii";
};
port23: port@23 {
reg = <23>;
microchip,bandwidth = <1000>;
phys = <&serdes 18>;
phy-handle = <&phy23>;
phy-mode = "qsgmii";
};
port24: port@24 {
reg = <24>;
microchip,bandwidth = <1000>;
phys = <&serdes 19>;
phy-handle = <&phy24>;
phy-mode = "qsgmii";
};
port25: port@25 {
reg = <25>;
microchip,bandwidth = <1000>;
phys = <&serdes 19>;
phy-handle = <&phy25>;
phy-mode = "qsgmii";
};
port26: port@26 {
reg = <26>;
microchip,bandwidth = <1000>;
phys = <&serdes 19>;
phy-handle = <&phy26>;
phy-mode = "qsgmii";
};
port27: port@27 {
reg = <27>;
microchip,bandwidth = <1000>;
phys = <&serdes 19>;
phy-handle = <&phy27>;
phy-mode = "qsgmii";
};
port28: port@28 {
reg = <28>;
microchip,bandwidth = <1000>;
phys = <&serdes 20>;
phy-handle = <&phy28>;
phy-mode = "qsgmii";
};
port29: port@29 {
reg = <29>;
microchip,bandwidth = <1000>;
phys = <&serdes 20>;
phy-handle = <&phy29>;
phy-mode = "qsgmii";
};
port30: port@30 {
reg = <30>;
microchip,bandwidth = <1000>;
phys = <&serdes 20>;
phy-handle = <&phy30>;
phy-mode = "qsgmii";
};
port31: port@31 {
reg = <31>;
microchip,bandwidth = <1000>;
phys = <&serdes 20>;
phy-handle = <&phy31>;
phy-mode = "qsgmii";
};
port32: port@32 {
reg = <32>;
microchip,bandwidth = <1000>;
phys = <&serdes 21>;
phy-handle = <&phy32>;
phy-mode = "qsgmii";
};
port33: port@33 {
reg = <33>;
microchip,bandwidth = <1000>;
phys = <&serdes 21>;
phy-handle = <&phy33>;
phy-mode = "qsgmii";
};
port34: port@34 {
reg = <34>;
microchip,bandwidth = <1000>;
phys = <&serdes 21>;
phy-handle = <&phy34>;
phy-mode = "qsgmii";
};
port35: port@35 {
reg = <35>;
microchip,bandwidth = <1000>;
phys = <&serdes 21>;
phy-handle = <&phy35>;
phy-mode = "qsgmii";
};
port36: port@36 {
reg = <36>;
microchip,bandwidth = <1000>;
phys = <&serdes 22>;
phy-handle = <&phy36>;
phy-mode = "qsgmii";
};
port37: port@37 {
reg = <37>;
microchip,bandwidth = <1000>;
phys = <&serdes 22>;
phy-handle = <&phy37>;
phy-mode = "qsgmii";
};
port38: port@38 {
reg = <38>;
microchip,bandwidth = <1000>;
phys = <&serdes 22>;
phy-handle = <&phy38>;
phy-mode = "qsgmii";
};
port39: port@39 {
reg = <39>;
microchip,bandwidth = <1000>;
phys = <&serdes 22>;
phy-handle = <&phy39>;
phy-mode = "qsgmii";
};
port40: port@40 {
reg = <40>;
microchip,bandwidth = <1000>;
phys = <&serdes 23>;
phy-handle = <&phy40>;
phy-mode = "qsgmii";
};
port41: port@41 {
reg = <41>;
microchip,bandwidth = <1000>;
phys = <&serdes 23>;
phy-handle = <&phy41>;
phy-mode = "qsgmii";
};
port42: port@42 {
reg = <42>;
microchip,bandwidth = <1000>;
phys = <&serdes 23>;
phy-handle = <&phy42>;
phy-mode = "qsgmii";
};
port43: port@43 {
reg = <43>;
microchip,bandwidth = <1000>;
phys = <&serdes 23>;
phy-handle = <&phy43>;
phy-mode = "qsgmii";
};
port44: port@44 {
reg = <44>;
microchip,bandwidth = <1000>;
phys = <&serdes 24>;
phy-handle = <&phy44>;
phy-mode = "qsgmii";
};
port45: port@45 {
reg = <45>;
microchip,bandwidth = <1000>;
phys = <&serdes 24>;
phy-handle = <&phy45>;
phy-mode = "qsgmii";
};
port46: port@46 {
reg = <46>;
microchip,bandwidth = <1000>;
phys = <&serdes 24>;
phy-handle = <&phy46>;
phy-mode = "qsgmii";
};
port47: port@47 {
reg = <47>;
microchip,bandwidth = <1000>;
phys = <&serdes 24>;
phy-handle = <&phy47>;
phy-mode = "qsgmii";
};
/* Then the 25G interfaces */
port60: port@60 {
reg = <60>;
microchip,bandwidth = <25000>;
phys = <&serdes 29>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth60>;
managed = "in-band-status";
};
port61: port@61 {
reg = <61>;
microchip,bandwidth = <25000>;
phys = <&serdes 30>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth61>;
managed = "in-band-status";
};
port62: port@62 {
reg = <62>;
microchip,bandwidth = <25000>;
phys = <&serdes 31>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth62>;
managed = "in-band-status";
};
port63: port@63 {
reg = <63>;
microchip,bandwidth = <25000>;
phys = <&serdes 32>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth63>;
managed = "in-band-status";
};
/* Finally the Management interface */
port64: port@64 {
reg = <64>;
microchip,bandwidth = <1000>;
phys = <&serdes 0>;
phy-handle = <&phy64>;
phy-mode = "sgmii";
};
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7