Commit d1160ebf authored by Marek Szyprowski's avatar Marek Szyprowski Committed by Krzysztof Kozlowski

arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e

Add initial clock configuration for display subsystem for Exynos5433
based TM2/TM2e boards in device tree in order to avoid dependency on the
configuration left by the bootloader. This initial configuration is also
needed to ensure that display subsystem is operational if display power
domain gets turned off before clock controller is probed and the inital
clock configuration left by the bootloader saved.

TM2 and TM2e uses different rate for DISP PLL clock, but for better
maintainability all 'assigned-clocks-*' properties for DISP CMU are
defines in each board dts instead of redefining the rates property.
Signed-off-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
parent 67707c78
...@@ -217,18 +217,6 @@ &cmu_aud { ...@@ -217,18 +217,6 @@ &cmu_aud {
assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
}; };
&cmu_disp {
assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
<&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
assigned-clock-parents = <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
<0>,
<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
assigned-clock-rates = <0>, <400000000>;
};
&cmu_fsys { &cmu_fsys {
assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
<&cmu_top CLK_MOUT_SCLK_USBHOST30>, <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
......
...@@ -18,6 +18,40 @@ / { ...@@ -18,6 +18,40 @@ / {
compatible = "samsung,tm2", "samsung,exynos5433"; compatible = "samsung,tm2", "samsung,exynos5433";
}; };
&cmu_disp {
/*
* TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
* clocks properties for DISP CMU for each board to keep them together
* for easier review and maintenance.
*/
assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
<&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
<&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
<&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
<&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
<&cmu_disp CLK_MOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
assigned-clock-parents = <0>, <0>,
<&cmu_mif CLK_ACLK_DISP_333>,
<&cmu_mif CLK_SCLK_DSIM0_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
<&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
<&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
<&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
<&cmu_disp CLK_FOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
assigned-clock-rates = <250000000>, <400000000>;
};
&hsi2c_9 { &hsi2c_9 {
status = "okay"; status = "okay";
......
...@@ -18,6 +18,40 @@ / { ...@@ -18,6 +18,40 @@ / {
compatible = "samsung,tm2e", "samsung,exynos5433"; compatible = "samsung,tm2e", "samsung,exynos5433";
}; };
&cmu_disp {
/*
* TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
* clocks properties for DISP CMU for each board to keep them together
* for easier review and maintenance.
*/
assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
<&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
<&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
<&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
<&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
<&cmu_disp CLK_MOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
assigned-clock-parents = <0>, <0>,
<&cmu_mif CLK_ACLK_DISP_333>,
<&cmu_mif CLK_SCLK_DSIM0_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
<&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
<&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
<&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
<&cmu_disp CLK_FOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
assigned-clock-rates = <278000000>, <400000000>;
};
&ldo31_reg { &ldo31_reg {
regulator-name = "TSP_VDD_1.8V_AP"; regulator-name = "TSP_VDD_1.8V_AP";
regulator-min-microvolt = <1800000>; regulator-min-microvolt = <1800000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment