Commit d157e889 authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

arm64: dts: imx8mn-evk: Fix ADV7535 dt-schema warnings

Currently, there are several ADV7535 dt-schema warnings.

Fx them the same way as in commit efa97aed ("arm64: dts:
imx8mm-evk: Fix hdmi@3d node").

As there are two different PMICs used on the imx8mn-evk variants,
describe the ADV7535 power supplies in each board devicetree.

Fixes: 5aafda60 ("arm64: dts: imx8mn-evk: Add camera support")
Signed-off-by: default avatarFabio Estevam <festevam@denx.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 97459224
......@@ -112,3 +112,13 @@ ldo5: LDO5 {
};
};
};
&i2c2 {
hdmi@3d {
avdd-supply = <&buck5>;
dvdd-supply = <&buck5>;
pvdd-supply = <&buck5>;
a2vdd-supply = <&buck5>;
v1p2-supply = <&buck5>;
};
};
......@@ -158,3 +158,13 @@ ldo6_reg: LDO6 {
};
};
};
&i2c2 {
hdmi@3d {
avdd-supply = <&buck5_reg>;
dvdd-supply = <&buck5_reg>;
pvdd-supply = <&buck5_reg>;
a2vdd-supply = <&buck5_reg>;
v1p2-supply = <&buck5_reg>;
};
};
......@@ -125,3 +125,13 @@ ldo5: LDO5 {
};
};
};
&i2c2 {
hdmi@3d {
avdd-supply = <&buck5>;
dvdd-supply = <&buck5>;
pvdd-supply = <&buck5>;
a2vdd-supply = <&buck5>;
v1p2-supply = <&buck5>;
};
};
......@@ -30,7 +30,7 @@ hdmi-connector {
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&adv7533_out>;
remote-endpoint = <&adv7535_out>;
};
};
};
......@@ -52,6 +52,13 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
enable-active-high;
};
reg_vddext_3v3: regulator-vddext-3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDEXT_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
......@@ -193,15 +200,11 @@ &i2c2 {
hdmi@3d {
compatible = "adi,adv7535";
reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
reg-names = "main", "cec", "edid", "packet";
reg = <0x3d>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
adi,dsi-lanes = <4>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
v3p3-supply = <&reg_vddext_3v3>;
ports {
#address-cells = <1>;
......@@ -210,7 +213,7 @@ ports {
port@0 {
reg = <0>;
adv7533_in: endpoint {
adv7535_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
......@@ -218,7 +221,7 @@ adv7533_in: endpoint {
port@1 {
reg = <1>;
adv7533_out: endpoint {
adv7535_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
......@@ -335,7 +338,7 @@ port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&adv7533_in>;
remote-endpoint = <&adv7535_in>;
data-lanes = <1 2 3 4>;
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment