Commit d19b4fa0 authored by Barry Song's avatar Barry Song

ARM: dts: drop MARCO platform DT stuff

MARCO will not be supported any more. it has been replaced by CSR
atlas7.
Signed-off-by: default avatarBarry Song <Baohua.Song@csr.com>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
parent b7392d22
...@@ -4,6 +4,4 @@ CSR SiRFprimaII and SiRFmarco device tree bindings. ...@@ -4,6 +4,4 @@ CSR SiRFprimaII and SiRFmarco device tree bindings.
Required root node properties: Required root node properties:
- compatible: - compatible:
- "sirf,prima2-cb" : prima2 "cb" evaluation board - "sirf,prima2-cb" : prima2 "cb" evaluation board
- "sirf,marco-cb" : marco "cb" evaluation board
- "sirf,prima2" : prima2 device based board - "sirf,prima2" : prima2 device based board
- "sirf,marco" : marco device based board
...@@ -175,7 +175,6 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ ...@@ -175,7 +175,6 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
kirkwood-ts419-6281.dtb \ kirkwood-ts419-6281.dtb \
kirkwood-ts419-6282.dtb kirkwood-ts419-6282.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb
dtb-$(CONFIG_ARCH_MMP) += pxa168-aspenite.dtb \ dtb-$(CONFIG_ARCH_MMP) += pxa168-aspenite.dtb \
pxa910-dkb.dtb \ pxa910-dkb.dtb \
......
/*
* DTS file for CSR SiRFmarco Evaluation Board
*
* Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "marco.dtsi"
/ {
model = "CSR SiRFmarco Evaluation Board";
compatible = "sirf,marco-cb", "sirf,marco";
memory {
reg = <0x40000000 0x60000000>;
};
axi {
peri-iobg {
uart1: uart@cc060000 {
status = "okay";
};
uart2: uart@cc070000 {
status = "okay";
};
i2c0: i2c@cc0e0000 {
status = "okay";
fpga-cpld@4d {
compatible = "sirf,fpga-cpld";
reg = <0x4d>;
};
};
spi1: spi@cc170000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins_a>;
spi@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
pci-iobg {
sd0: sdhci@cd000000 {
bus-width = <8>;
status = "okay";
};
};
};
};
};
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment