Commit d1e2d966 authored by Ariel Elior's avatar Ariel Elior Committed by David S. Miller

bnx2x: Loaded Firmware Version Validation

In a virtualized environment it is possible for a loading driver to discover
that Firmware is already loaded to the device, and that this FW does not match
its own. This can happen for example if different Physical Functions are
Assigned to different VMs in which different driver versions are loaded. The
code in this patch ensures that only drivers with matching FW are loaded over
the device, and that in the case described above where the Firmware version
doesn't match the driver load is aborted.
Signed-off-by: default avatarAriel Elior <ariele@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 89db4ad8
......@@ -1783,6 +1783,29 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
rc = -EBUSY; /* other port in diagnostic mode */
LOAD_ERROR_EXIT(bp, load_error1);
}
if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP &&
load_code != FW_MSG_CODE_DRV_LOAD_COMMON) {
/* build FW version dword */
u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) +
(BCM_5710_FW_MINOR_VERSION << 8) +
(BCM_5710_FW_REVISION_VERSION << 16) +
(BCM_5710_FW_ENGINEERING_VERSION << 24);
/* read loaded FW from chip */
u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM);
DP(BNX2X_MSG_SP, "loaded fw %x, my fw %x",
loaded_fw, my_fw);
/* abort nic load if version mismatch */
if (my_fw != loaded_fw) {
BNX2X_ERR("bnx2x with FW %x already loaded, "
"which mismatches my %x FW. aborting",
loaded_fw, my_fw);
rc = -EBUSY;
LOAD_ERROR_EXIT(bp, load_error2);
}
}
} else {
int path = BP_PATH(bp);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment