Commit d21fbbb4 authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Mauro Carvalho Chehab

[media] v4l: vsp1: Pass parameter type to entity configuration operation

Replace the current boolean parameter (full / !full) with an explicit
enum.

- VSP1_ENTITY_PARAMS_INIT for parameters to be configured at pipeline
  initialization time only (V4L2 stream on or DRM atomic update)
- VSP1_ENTITY_PARAMS_RUNTIME for all parameters that can be freely
  modified at runtime (through V4L2 controls)

This will allow future extensions when implementing image partitioning
support.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: default avatarNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent abe9609f
......@@ -285,14 +285,15 @@ static const struct v4l2_subdev_ops bru_ops = {
static void bru_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl, bool full)
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
struct vsp1_bru *bru = to_bru(&entity->subdev);
struct v4l2_mbus_framefmt *format;
unsigned int flags;
unsigned int i;
if (!full)
if (params != VSP1_ENTITY_PARAMS_INIT)
return;
format = vsp1_entity_get_pad_format(&bru->entity, bru->entity.config,
......
......@@ -214,42 +214,47 @@ static const struct v4l2_subdev_ops clu_ops = {
static void clu_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl, bool full)
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
struct vsp1_clu *clu = to_clu(&entity->subdev);
struct vsp1_dl_body *dlb;
unsigned long flags;
u32 ctrl = VI6_CLU_CTRL_AAI | VI6_CLU_CTRL_MVS | VI6_CLU_CTRL_EN;
/* The format can't be changed during streaming, only verify it at
* stream start and store the information internally for future partial
* reconfiguration calls.
*/
if (full) {
switch (params) {
case VSP1_ENTITY_PARAMS_INIT: {
/* The format can't be changed during streaming, only verify it
* at setup time and store the information internally for future
* runtime configuration calls.
*/
struct v4l2_mbus_framefmt *format;
format = vsp1_entity_get_pad_format(&clu->entity,
clu->entity.config,
CLU_PAD_SINK);
clu->yuv_mode = format->code == MEDIA_BUS_FMT_AYUV8_1X32;
return;
break;
}
/* 2D mode can only be used with the YCbCr pixel encoding. */
if (clu->mode == V4L2_CID_VSP1_CLU_MODE_2D && clu->yuv_mode)
ctrl |= VI6_CLU_CTRL_AX1I_2D | VI6_CLU_CTRL_AX2I_2D
| VI6_CLU_CTRL_OS0_2D | VI6_CLU_CTRL_OS1_2D
| VI6_CLU_CTRL_OS2_2D | VI6_CLU_CTRL_M2D;
case VSP1_ENTITY_PARAMS_RUNTIME:
/* 2D mode can only be used with the YCbCr pixel encoding. */
if (clu->mode == V4L2_CID_VSP1_CLU_MODE_2D && clu->yuv_mode)
ctrl |= VI6_CLU_CTRL_AX1I_2D | VI6_CLU_CTRL_AX2I_2D
| VI6_CLU_CTRL_OS0_2D | VI6_CLU_CTRL_OS1_2D
| VI6_CLU_CTRL_OS2_2D | VI6_CLU_CTRL_M2D;
vsp1_clu_write(clu, dl, VI6_CLU_CTRL, ctrl);
vsp1_clu_write(clu, dl, VI6_CLU_CTRL, ctrl);
spin_lock_irqsave(&clu->lock, flags);
dlb = clu->clu;
clu->clu = NULL;
spin_unlock_irqrestore(&clu->lock, flags);
spin_lock_irqsave(&clu->lock, flags);
dlb = clu->clu;
clu->clu = NULL;
spin_unlock_irqrestore(&clu->lock, flags);
if (dlb)
vsp1_dl_list_add_fragment(dl, dlb);
if (dlb)
vsp1_dl_list_add_fragment(dl, dlb);
break;
}
}
static const struct vsp1_entity_operations clu_entity_ops = {
......
......@@ -492,8 +492,10 @@ void vsp1_du_atomic_flush(struct device *dev)
vsp1_entity_route_setup(entity, pipe->dl);
if (entity->ops->configure) {
entity->ops->configure(entity, pipe, pipe->dl, true);
entity->ops->configure(entity, pipe, pipe->dl, false);
entity->ops->configure(entity, pipe, pipe->dl,
VSP1_ENTITY_PARAMS_INIT);
entity->ops->configure(entity, pipe, pipe->dl,
VSP1_ENTITY_PARAMS_RUNTIME);
}
/* The memory buffer address must be applied after configuring
......
......@@ -35,6 +35,16 @@ enum vsp1_entity_type {
VSP1_ENTITY_WPF,
};
/*
* enum vsp1_entity_params - Entity configuration parameters class
* @VSP1_ENTITY_PARAMS_INIT - Initial parameters
* @VSP1_ENTITY_PARAMS_RUNTIME - Runtime-configurable parameters
*/
enum vsp1_entity_params {
VSP1_ENTITY_PARAMS_INIT,
VSP1_ENTITY_PARAMS_RUNTIME,
};
#define VSP1_ENTITY_MAX_INPUTS 5 /* For the BRU */
/*
......@@ -73,7 +83,7 @@ struct vsp1_entity_operations {
void (*destroy)(struct vsp1_entity *);
void (*set_memory)(struct vsp1_entity *, struct vsp1_dl_list *dl);
void (*configure)(struct vsp1_entity *, struct vsp1_pipeline *,
struct vsp1_dl_list *, bool);
struct vsp1_dl_list *, enum vsp1_entity_params);
};
struct vsp1_entity {
......
......@@ -132,11 +132,12 @@ static const struct v4l2_subdev_ops hsit_ops = {
static void hsit_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl, bool full)
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
struct vsp1_hsit *hsit = to_hsit(&entity->subdev);
if (!full)
if (params != VSP1_ENTITY_PARAMS_INIT)
return;
if (hsit->inverse)
......
......@@ -129,7 +129,8 @@ static const struct v4l2_subdev_ops lif_ops = {
static void lif_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl, bool full)
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
const struct v4l2_mbus_framefmt *format;
struct vsp1_lif *lif = to_lif(&entity->subdev);
......@@ -137,7 +138,7 @@ static void lif_configure(struct vsp1_entity *entity,
unsigned int obth = 400;
unsigned int lbth = 200;
if (!full)
if (params != VSP1_ENTITY_PARAMS_INIT)
return;
format = vsp1_entity_get_pad_format(&lif->entity, lif->entity.config,
......
......@@ -190,24 +190,28 @@ static const struct v4l2_subdev_ops lut_ops = {
static void lut_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl, bool full)
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
struct vsp1_lut *lut = to_lut(&entity->subdev);
struct vsp1_dl_body *dlb;
unsigned long flags;
if (full) {
switch (params) {
case VSP1_ENTITY_PARAMS_INIT:
vsp1_lut_write(lut, dl, VI6_LUT_CTRL, VI6_LUT_CTRL_EN);
return;
}
break;
spin_lock_irqsave(&lut->lock, flags);
dlb = lut->lut;
lut->lut = NULL;
spin_unlock_irqrestore(&lut->lock, flags);
case VSP1_ENTITY_PARAMS_RUNTIME:
spin_lock_irqsave(&lut->lock, flags);
dlb = lut->lut;
lut->lut = NULL;
spin_unlock_irqrestore(&lut->lock, flags);
if (dlb)
vsp1_dl_list_add_fragment(dl, dlb);
if (dlb)
vsp1_dl_list_add_fragment(dl, dlb);
break;
}
}
static const struct vsp1_entity_operations lut_entity_ops = {
......
......@@ -60,7 +60,8 @@ static void rpf_set_memory(struct vsp1_entity *entity, struct vsp1_dl_list *dl)
static void rpf_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl, bool full)
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev);
const struct vsp1_format_info *fmtinfo = rpf->fmtinfo;
......@@ -73,7 +74,7 @@ static void rpf_configure(struct vsp1_entity *entity,
u32 pstride;
u32 infmt;
if (!full) {
if (params == VSP1_ENTITY_PARAMS_RUNTIME) {
vsp1_rpf_write(rpf, dl, VI6_RPF_VRTCOL_SET,
rpf->alpha << VI6_RPF_VRTCOL_SET_LAYA_SHIFT);
vsp1_rpf_write(rpf, dl, VI6_RPF_MULT_ALPHA, rpf->mult_alpha |
......
......@@ -271,7 +271,8 @@ static const struct v4l2_subdev_ops sru_ops = {
static void sru_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl, bool full)
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
const struct vsp1_sru_param *param;
struct vsp1_sru *sru = to_sru(&entity->subdev);
......@@ -279,7 +280,7 @@ static void sru_configure(struct vsp1_entity *entity,
struct v4l2_mbus_framefmt *output;
u32 ctrl0;
if (!full)
if (params != VSP1_ENTITY_PARAMS_INIT)
return;
input = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config,
......
......@@ -260,7 +260,8 @@ static const struct v4l2_subdev_ops uds_ops = {
static void uds_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl, bool full)
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
struct vsp1_uds *uds = to_uds(&entity->subdev);
const struct v4l2_mbus_framefmt *output;
......@@ -269,7 +270,7 @@ static void uds_configure(struct vsp1_entity *entity,
unsigned int vscale;
bool multitap;
if (!full)
if (params != VSP1_ENTITY_PARAMS_INIT)
return;
input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
......
......@@ -254,7 +254,8 @@ static void vsp1_video_pipeline_run(struct vsp1_pipeline *pipe)
list_for_each_entry(entity, &pipe->entities, list_pipe) {
if (entity->ops->configure)
entity->ops->configure(entity, pipe, pipe->dl, false);
entity->ops->configure(entity, pipe, pipe->dl,
VSP1_ENTITY_PARAMS_RUNTIME);
}
for (i = 0; i < vsp1->info->rpf_count; ++i) {
......@@ -629,7 +630,8 @@ static int vsp1_video_setup_pipeline(struct vsp1_pipeline *pipe)
vsp1_entity_route_setup(entity, pipe->dl);
if (entity->ops->configure)
entity->ops->configure(entity, pipe, pipe->dl, true);
entity->ops->configure(entity, pipe, pipe->dl,
VSP1_ENTITY_PARAMS_INIT);
}
return 0;
......
......@@ -206,7 +206,8 @@ static void wpf_set_memory(struct vsp1_entity *entity, struct vsp1_dl_list *dl)
static void wpf_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl, bool full)
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev);
struct vsp1_device *vsp1 = wpf->entity.vsp1;
......@@ -216,7 +217,7 @@ static void wpf_configure(struct vsp1_entity *entity,
u32 outfmt = 0;
u32 srcrpf = 0;
if (!full) {
if (params == VSP1_ENTITY_PARAMS_RUNTIME) {
const unsigned int mask = BIT(WPF_CTRL_VFLIP)
| BIT(WPF_CTRL_HFLIP);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment