Skip to content

L
linux
Commit d2b1e353 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

alpha: sable: remove early machine support 

The sable family (Alphaserver 2000 and 2100) comes in variants for
EV4, EV45, EV5 and EV56. Drop support for the earlier ones that
lack support for the BWX extension but keep the later 'gamma'
variant around since that works with EV56 CPUs.
Acked-by: default avatarPaul E. McKenney <paulmck@kernel.org>
Acked-by: default avatarMatt Turner <mattst88@gmail.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent f81f335a
Hide whitespace changes
Inline Side-by-side
Showing with 11 additions and 333 deletions
arch/alpha/Kconfig
View file @ d2b1e353
......@@ -100,7 +100,6 @@ choice
EB66 EB66 21066 evaluation board
EB66+ EB66+ 21066 evaluation board
LX164 AlphaPC164-LX
Lynx AS 2100A
Miata Personal Workstation 433/500/600 a/au
Marvel AlphaServer ES47 / ES80 / GS1280
Mikasa AS 1000
......@@ -203,12 +202,6 @@ config ALPHA_LX164
A technical overview of this board is available at
<http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
config ALPHA_LYNX
bool "Lynx"
select HAVE_EISA
help
AlphaServer 2100A-based systems.
config ALPHA_MARVEL
bool "Marvel"
help
......@@ -325,9 +318,8 @@ config ALPHA_NONAME
config ALPHA_EV4
bool
depends on (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
default y if !ALPHA_LYNX
default y if !ALPHA_EV5
depends on ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
default y
config ALPHA_LCA
bool
......@@ -352,8 +344,8 @@ config ALPHA_EB64P
Runs from standard PC power supply.
config ALPHA_EV5
bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
bool
default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
config ALPHA_CIA
bool
......@@ -378,16 +370,9 @@ config ALPHA_PRIMO
help
Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
config ALPHA_GAMMA
bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_SABLE
depends on ALPHA_SABLE || ALPHA_LYNX
default ALPHA_LYNX
help
Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
config ALPHA_T2
bool
depends on ALPHA_SABLE || ALPHA_LYNX
depends on ALPHA_SABLE
default y
config ALPHA_PYXIS
......@@ -471,7 +456,7 @@ config ALPHA_QEMU
config ALPHA_SRM
bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
depends on TTY
default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
help
There are two different types of booting firmware on Alphas: SRM,
which is command line driven, and ARC, which uses menus and arrow
......@@ -497,7 +482,7 @@ config ARCH_MAY_HAVE_PC_FDC
config SMP
bool "Symmetric multi-processing support"
depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
depends on ALPHA_SABLE || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more
......
arch/alpha/include/asm/core_t2.h
View file @ d2b1e353
......@@ -25,16 +25,8 @@
#define T2_MEM_R1_MASK 0x07ffffff /* Mem sparse region 1 mask is 27 bits */
/* GAMMA-SABLE is a SABLE with EV5-based CPUs */
/* All LYNX machines, EV4 or EV5, use the GAMMA bias also */
#define _GAMMA_BIAS 0x8000000000UL
#if defined(CONFIG_ALPHA_GENERIC)
#define GAMMA_BIAS alpha_mv.sys.t2.gamma_bias
#elif defined(CONFIG_ALPHA_GAMMA)
#define GAMMA_BIAS _GAMMA_BIAS
#else
#define GAMMA_BIAS 0
#endif
/*
* Memory spaces:
......
arch/alpha/include/asm/irq.h
View file @ d2b1e353
......@@ -55,7 +55,6 @@
# define NR_IRQS 40
#elif defined(CONFIG_ALPHA_DP264) || \
defined(CONFIG_ALPHA_LYNX) || \
defined(CONFIG_ALPHA_SHARK)
# define NR_IRQS 64
......
arch/alpha/kernel/Makefile
View file @ d2b1e353
......@@ -88,7 +88,6 @@ obj-$(CONFIG_ALPHA_RAWHIDE) += sys_rawhide.o irq_i8259.o
obj-$(CONFIG_ALPHA_RUFFIAN) += sys_ruffian.o irq_pyxis.o irq_i8259.o
obj-$(CONFIG_ALPHA_RX164) += sys_rx164.o irq_i8259.o
obj-$(CONFIG_ALPHA_SABLE) += sys_sable.o
obj-$(CONFIG_ALPHA_LYNX) += sys_sable.o
obj-$(CONFIG_ALPHA_BOOK1) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
obj-$(CONFIG_ALPHA_AVANTI) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
obj-$(CONFIG_ALPHA_NONAME) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
......
arch/alpha/kernel/setup.c
View file @ d2b1e353
......@@ -182,7 +182,6 @@ WEAK(eb66_mv);
WEAK(eb66p_mv);
WEAK(eiger_mv);
WEAK(lx164_mv);
WEAK(lynx_mv);
WEAK(marvel_ev7_mv);
WEAK(miata_mv);
WEAK(mikasa_mv);
......@@ -198,7 +197,6 @@ WEAK(privateer_mv);
WEAK(rawhide_mv);
WEAK(ruffian_mv);
WEAK(rx164_mv);
WEAK(sable_mv);
WEAK(sable_gamma_mv);
WEAK(shark_mv);
WEAK(sx164_mv);
......@@ -751,7 +749,7 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
&alphabook1_mv,
&rawhide_mv,
NULL, /* K2 */
&lynx_mv, /* Lynx */
NULL, /* Lynx */
&xl_mv,
NULL, /* EB164 -- see variation. */
NULL, /* Noritake -- see below. */
......@@ -905,10 +903,7 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
vec = &noritake_mv;
break;
case ST_DEC_2100_A500:
if (cpu == EV5_CPU || cpu == EV56_CPU)
vec = &sable_gamma_mv;
else
vec = &sable_mv;
vec = &sable_gamma_mv;
break;
}
}
......@@ -932,7 +927,6 @@ get_sysvec_byname(const char *name)
&eb66p_mv,
&eiger_mv,
&lx164_mv,
&lynx_mv,
&miata_mv,
&mikasa_mv,
&mikasa_primo_mv,
......@@ -947,7 +941,6 @@ get_sysvec_byname(const char *name)
&rawhide_mv,
&ruffian_mv,
&rx164_mv,
&sable_mv,
&sable_gamma_mv,
&shark_mv,
&sx164_mv,
......
arch/alpha/kernel/sys_sable.c
View file @ d2b1e353
......@@ -212,232 +212,6 @@ sable_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
}
#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE) */
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
/***********************************************************************/
/* LYNX hardware specifics
*/
/*
* For LYNX, which is also baroque, we manage 64 IRQs, via a custom IC.
*
* Bit Meaning Kernel IRQ
*------------------------------------------
* 0
* 1
* 2
* 3 mouse 12
* 4
* 5
* 6 keyboard 1
* 7 floppy 6
* 8 COM2 3
* 9 parallel port 7
*10 EISA irq 3 -
*11 EISA irq 4 -
*12 EISA irq 5 5
*13 EISA irq 6 -
*14 EISA irq 7 -
*15 COM1 4
*16 EISA irq 9 9
*17 EISA irq 10 10
*18 EISA irq 11 11
*19 EISA irq 12 -
*20
*21 EISA irq 14 14
*22 EISA irq 15 15
*23 IIC -
*24 VGA (builtin) -
*25
*26
*27
*28 NCR810 (builtin) 28
*29
*30
*31
*32 PCI 0 slot 4 A primary bus 32
*33 PCI 0 slot 4 B primary bus 33
*34 PCI 0 slot 4 C primary bus 34
*35 PCI 0 slot 4 D primary bus
*36 PCI 0 slot 5 A primary bus
*37 PCI 0 slot 5 B primary bus
*38 PCI 0 slot 5 C primary bus
*39 PCI 0 slot 5 D primary bus
*40 PCI 0 slot 6 A primary bus
*41 PCI 0 slot 6 B primary bus
*42 PCI 0 slot 6 C primary bus
*43 PCI 0 slot 6 D primary bus
*44 PCI 0 slot 7 A primary bus
*45 PCI 0 slot 7 B primary bus
*46 PCI 0 slot 7 C primary bus
*47 PCI 0 slot 7 D primary bus
*48 PCI 0 slot 0 A secondary bus
*49 PCI 0 slot 0 B secondary bus
*50 PCI 0 slot 0 C secondary bus
*51 PCI 0 slot 0 D secondary bus
*52 PCI 0 slot 1 A secondary bus
*53 PCI 0 slot 1 B secondary bus
*54 PCI 0 slot 1 C secondary bus
*55 PCI 0 slot 1 D secondary bus
*56 PCI 0 slot 2 A secondary bus
*57 PCI 0 slot 2 B secondary bus
*58 PCI 0 slot 2 C secondary bus
*59 PCI 0 slot 2 D secondary bus
*60 PCI 0 slot 3 A secondary bus
*61 PCI 0 slot 3 B secondary bus
*62 PCI 0 slot 3 C secondary bus
*63 PCI 0 slot 3 D secondary bus
*/
static void
lynx_update_irq_hw(unsigned long bit, unsigned long mask)
{
/*
* Write the AIR register on the T3/T4 with the
* address of the IC mask register (offset 0x40)
*/
*(vulp)T2_AIR = 0x40;
mb();
*(vulp)T2_AIR; /* re-read to force write */
mb();
*(vulp)T2_DIR = mask;
mb();
mb();
}
static void
lynx_ack_irq_hw(unsigned long bit)
{
*(vulp)T2_VAR = (u_long) bit;
mb();
mb();
}
static irq_swizzle_t lynx_irq_swizzle = {
{ /* irq_to_mask */
-1, 6, -1, 8, 15, 12, 7, 9, /* pseudo PIC 0-7 */
-1, 16, 17, 18, 3, -1, 21, 22, /* pseudo PIC 8-15 */
-1, -1, -1, -1, -1, -1, -1, -1, /* pseudo */
-1, -1, -1, -1, 28, -1, -1, -1, /* pseudo */
32, 33, 34, 35, 36, 37, 38, 39, /* mask 32-39 */
40, 41, 42, 43, 44, 45, 46, 47, /* mask 40-47 */
48, 49, 50, 51, 52, 53, 54, 55, /* mask 48-55 */
56, 57, 58, 59, 60, 61, 62, 63 /* mask 56-63 */
},
{ /* mask_to_irq */
-1, -1, -1, 12, -1, -1, 1, 6, /* mask 0-7 */
3, 7, -1, -1, 5, -1, -1, 4, /* mask 8-15 */
9, 10, 11, -1, -1, 14, 15, -1, /* mask 16-23 */
-1, -1, -1, -1, 28, -1, -1, -1, /* mask 24-31 */
32, 33, 34, 35, 36, 37, 38, 39, /* mask 32-39 */
40, 41, 42, 43, 44, 45, 46, 47, /* mask 40-47 */
48, 49, 50, 51, 52, 53, 54, 55, /* mask 48-55 */
56, 57, 58, 59, 60, 61, 62, 63 /* mask 56-63 */
},
-1,
lynx_update_irq_hw,
lynx_ack_irq_hw
};
static void __init
lynx_init_irq(void)
{
sable_lynx_irq_swizzle = &lynx_irq_swizzle;
sable_lynx_init_irq(64);
}
/*
* PCI Fixup configuration for ALPHA LYNX (2100A)
*
* The device to slot mapping looks like:
*
* Slot Device
* 0 none
* 1 none
* 2 PCI-EISA bridge
* 3 PCI-PCI bridge
* 4 NCR 810 (Demi-Lynx only)
* 5 none
* 6 PCI on board slot 4
* 7 PCI on board slot 5
* 8 PCI on board slot 6
* 9 PCI on board slot 7
*
* And behind the PPB we have:
*
* 11 PCI on board slot 0
* 12 PCI on board slot 1
* 13 PCI on board slot 2
* 14 PCI on board slot 3
*/
/*
* NOTE: the IRQ assignments below are arbitrary, but need to be consistent
* with the values in the irq swizzling tables above.
*/
static int
lynx_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static char irq_tab[19][5] = {
/*INT INTA INTB INTC INTD */
{ -1, -1, -1, -1, -1}, /* IdSel 13, PCEB */
{ -1, -1, -1, -1, -1}, /* IdSel 14, PPB */
{ 28, 28, 28, 28, 28}, /* IdSel 15, NCR demi */
{ -1, -1, -1, -1, -1}, /* IdSel 16, none */
{ 32, 32, 33, 34, 35}, /* IdSel 17, slot 4 */
{ 36, 36, 37, 38, 39}, /* IdSel 18, slot 5 */
{ 40, 40, 41, 42, 43}, /* IdSel 19, slot 6 */
{ 44, 44, 45, 46, 47}, /* IdSel 20, slot 7 */
{ -1, -1, -1, -1, -1}, /* IdSel 22, none */
/* The following are actually behind the PPB. */
{ -1, -1, -1, -1, -1}, /* IdSel 16 none */
{ 28, 28, 28, 28, 28}, /* IdSel 17 NCR lynx */
{ -1, -1, -1, -1, -1}, /* IdSel 18 none */
{ -1, -1, -1, -1, -1}, /* IdSel 19 none */
{ -1, -1, -1, -1, -1}, /* IdSel 20 none */
{ -1, -1, -1, -1, -1}, /* IdSel 21 none */
{ 48, 48, 49, 50, 51}, /* IdSel 22 slot 0 */
{ 52, 52, 53, 54, 55}, /* IdSel 23 slot 1 */
{ 56, 56, 57, 58, 59}, /* IdSel 24 slot 2 */
{ 60, 60, 61, 62, 63} /* IdSel 25 slot 3 */
};
const long min_idsel = 2, max_idsel = 20, irqs_per_slot = 5;
return COMMON_TABLE_LOOKUP;
}
static u8
lynx_swizzle(struct pci_dev *dev, u8 *pinp)
{
int slot, pin = *pinp;
if (dev->bus->number == 0) {
slot = PCI_SLOT(dev->devfn);
}
/* Check for the built-in bridge */
else if (PCI_SLOT(dev->bus->self->devfn) == 3) {
slot = PCI_SLOT(dev->devfn) + 11;
}
else
{
/* Must be a card-based bridge. */
do {
if (PCI_SLOT(dev->bus->self->devfn) == 3) {
slot = PCI_SLOT(dev->devfn) + 11;
break;
}
pin = pci_swizzle_interrupt_pin(dev, pin);
/* Move up the chain of bridges. */
dev = dev->bus->self;
/* Slot of the next bridge. */
slot = PCI_SLOT(dev->devfn);
} while (dev->bus->self);
}
*pinp = pin;
return slot;
}
#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX) */
/***********************************************************************/
/* GENERIC irq routines */
......@@ -539,40 +313,7 @@ sable_lynx_init_pci(void)
* these games with GAMMA_BIAS.
*/
#if defined(CONFIG_ALPHA_GENERIC) || \
(defined(CONFIG_ALPHA_SABLE) && !defined(CONFIG_ALPHA_GAMMA))
#undef GAMMA_BIAS
#define GAMMA_BIAS 0
struct alpha_machine_vector sable_mv __initmv = {
.vector_name = "Sable",
DO_EV4_MMU,
DO_DEFAULT_RTC,
DO_T2_IO,
.machine_check = t2_machine_check,
.max_isa_dma_address = ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
.min_io_address = EISA_DEFAULT_IO_BASE,
.min_mem_address = T2_DEFAULT_MEM_BASE,
.nr_irqs = 40,
.device_interrupt = sable_lynx_srm_device_interrupt,
.init_arch = t2_init_arch,
.init_irq = sable_init_irq,
.init_rtc = common_init_rtc,
.init_pci = sable_lynx_init_pci,
.kill_arch = t2_kill_arch,
.pci_map_irq = sable_map_irq,
.pci_swizzle = common_swizzle,
.sys = { .t2 = {
.gamma_bias = 0
} }
};
ALIAS_MV(sable)
#endif /* GENERIC || (SABLE && !GAMMA) */
#if defined(CONFIG_ALPHA_GENERIC) || \
(defined(CONFIG_ALPHA_SABLE) && defined(CONFIG_ALPHA_GAMMA))
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE)
#undef GAMMA_BIAS
#define GAMMA_BIAS _GAMMA_BIAS
struct alpha_machine_vector sable_gamma_mv __initmv = {
......@@ -601,35 +342,4 @@ struct alpha_machine_vector sable_gamma_mv __initmv = {
} }
};
ALIAS_MV(sable_gamma)
#endif /* GENERIC || (SABLE && GAMMA) */
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
#undef GAMMA_BIAS
#define GAMMA_BIAS _GAMMA_BIAS
struct alpha_machine_vector lynx_mv __initmv = {
.vector_name = "Lynx",
DO_EV4_MMU,
DO_DEFAULT_RTC,
DO_T2_IO,
.machine_check = t2_machine_check,
.max_isa_dma_address = ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
.min_io_address = EISA_DEFAULT_IO_BASE,
.min_mem_address = T2_DEFAULT_MEM_BASE,
.nr_irqs = 64,
.device_interrupt = sable_lynx_srm_device_interrupt,
.init_arch = t2_init_arch,
.init_irq = lynx_init_irq,
.init_rtc = common_init_rtc,
.init_pci = sable_lynx_init_pci,
.kill_arch = t2_kill_arch,
.pci_map_irq = lynx_map_irq,
.pci_swizzle = lynx_swizzle,
.sys = { .t2 = {
.gamma_bias = _GAMMA_BIAS
} }
};
ALIAS_MV(lynx)
#endif /* GENERIC || LYNX */
#endif /* GENERIC || SABLE */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7