mmc: sdhci-tegra: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY

It has turned out that the sdhci-tegra controller requires the R1B response,
for commands that has this response associated with them. So, converting
from an R1B to an R1 response for a CMD6 for example, leads to problems
with the HW busy detection support.

Fix this by informing the mmc core about the requirement, via setting the
host cap, MMC_CAP_NEED_RSP_BUSY.
Reported-by: Bitan Biswas <bbiswas@nvidia.com>
Reported-by: Peter Geis <pgwipeout@gmail.com>
Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: <stable@vger.kernel.org>
Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Tested-By: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/sdhci-tegra.c

@@ -1552,6 +1552,9 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 	if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
 		host->mmc->caps |= MMC_CAP_1_8V_DDR;
 
+	/* R1B responses is required to properly manage HW busy detection. */
+	host->mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
+
 	tegra_sdhci_parse_dt(host);
 
 	tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",