Commit d3169863 authored by Vladimir Oltean's avatar Vladimir Oltean Committed by David S. Miller

net: phy: mscc: add support for VSC8502

This is a dual copper PHY with support for MII/GMII/RGMII on MAC side,
as well as a bunch of other features such as SyncE and Ring Resiliency.

I haven't tested interrupts and WoL, but I am confident that they work
since support is already present in the driver and the register map is
no different for this PHY.

PHY statistics work, PHY tunables appear to work, suspend/resume works.
Signed-off-by: default avatarWes Li <wes.li@nxp.com>
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7b005a17
...@@ -276,6 +276,7 @@ enum rgmii_clock_delay { ...@@ -276,6 +276,7 @@ enum rgmii_clock_delay {
/* Microsemi PHY ID's /* Microsemi PHY ID's
* Code assumes lowest nibble is 0 * Code assumes lowest nibble is 0
*/ */
#define PHY_ID_VSC8502 0x00070630
#define PHY_ID_VSC8504 0x000704c0 #define PHY_ID_VSC8504 0x000704c0
#define PHY_ID_VSC8514 0x00070670 #define PHY_ID_VSC8514 0x00070670
#define PHY_ID_VSC8530 0x00070560 #define PHY_ID_VSC8530 0x00070560
......
...@@ -2089,6 +2089,30 @@ static int vsc85xx_probe(struct phy_device *phydev) ...@@ -2089,6 +2089,30 @@ static int vsc85xx_probe(struct phy_device *phydev)
/* Microsemi VSC85xx PHYs */ /* Microsemi VSC85xx PHYs */
static struct phy_driver vsc85xx_driver[] = { static struct phy_driver vsc85xx_driver[] = {
{
.phy_id = PHY_ID_VSC8502,
.name = "Microsemi GE VSC8502 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
.soft_reset = &genphy_soft_reset,
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
.read_status = &vsc85xx_read_status,
.ack_interrupt = &vsc85xx_ack_interrupt,
.config_intr = &vsc85xx_config_intr,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
.probe = &vsc85xx_probe,
.set_wol = &vsc85xx_wol_set,
.get_wol = &vsc85xx_wol_get,
.get_tunable = &vsc85xx_get_tunable,
.set_tunable = &vsc85xx_set_tunable,
.read_page = &vsc85xx_phy_read_page,
.write_page = &vsc85xx_phy_write_page,
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
},
{ {
.phy_id = PHY_ID_VSC8504, .phy_id = PHY_ID_VSC8504,
.name = "Microsemi GE VSC8504 SyncE", .name = "Microsemi GE VSC8504 SyncE",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment