Merge tag 'regulator-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A few small things here and there, nothing major here really.  The
  conversion of twl4030ldo_ops to get_voltage_sel is a fix, as covered
  in the commit log it fixes inconsistency in handling of the IS_UNSUP()
  feature in the driver."

* tag 'regulator-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: fixed regulator_bulk_enable unwinding code
  regulator: twl: Convert twl4030ldo_ops to get_voltage_sel
  regulator: palmas: fix number of SMPS voltages
  regulator: core: fix documentation error in regulator_allow_bypass
  regulator: core: update kernel documentation for regulator_desc
  regulator: db8500-prcmu - remove incorrect __exit markup

drivers/regulator/core.c

@@ -2830,7 +2830,7 @@ EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap);
  * regulator_allow_bypass - allow the regulator to go into bypass mode
  *
  * @regulator: Regulator to configure
- * @allow: enable or disable bypass mode
+ * @enable: enable or disable bypass mode
  *
  * Allow the regulator to go into bypass mode if all other consumers
  * for the regulator also enable bypass mode and the machine
@@ -3057,9 +3057,13 @@ int regulator_bulk_enable(int num_consumers,
 	return 0;
 
 err:
-	pr_err("Failed to enable %s: %d\n", consumers[i].supply, ret);
-	while (--i >= 0)
+	for (i = 0; i < num_consumers; i++) {
+		if (consumers[i].ret < 0)
+			pr_err("Failed to enable %s: %d\n", consumers[i].supply,
+			       consumers[i].ret);
+		else
 			regulator_disable(consumers[i].consumer);
+	}
 
 	return ret;
 }

drivers/regulator/db8500-prcmu.c

@@ -528,7 +528,7 @@ static int db8500_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __exit db8500_regulator_remove(struct platform_device *pdev)
+static int db8500_regulator_remove(struct platform_device *pdev)
 {
 	int i;
 
@@ -553,7 +553,7 @@ static struct platform_driver db8500_regulator_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = db8500_regulator_probe,
-	.remove = __exit_p(db8500_regulator_remove),
+	.remove = db8500_regulator_remove,
 };
 
 static int __init db8500_regulator_init(void)

drivers/regulator/palmas-regulator.c

@@ -4,6 +4,7 @@
  * Copyright 2011-2012 Texas Instruments Inc.
  *
  * Author: Graeme Gregory <gg@slimlogic.co.uk>
+ * Author: Ian Lartey <ian@slimlogic.co.uk>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under  the terms of the GNU General  Public License as published by the
@@ -156,7 +157,7 @@ static const struct regs_info palmas_regs_info[] = {
  *
  * So they are basically (maxV-minV)/stepV
  */
-#define PALMAS_SMPS_NUM_VOLTAGES	116
+#define PALMAS_SMPS_NUM_VOLTAGES	117
 #define PALMAS_SMPS10_NUM_VOLTAGES	2
 #define PALMAS_LDO_NUM_VOLTAGES		50
 

drivers/regulator/twl-regulator.c

@@ -471,24 +471,23 @@ twl4030ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
 			    selector);
 }
 
-static int twl4030ldo_get_voltage(struct regulator_dev *rdev)
+static int twl4030ldo_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
-	int		vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
-								VREG_VOLTAGE);
+	int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE);
 
 	if (vsel < 0)
 		return vsel;
 
 	vsel &= info->table_len - 1;
-	return LDO_MV(info->table[vsel]) * 1000;
+	return vsel;
 }
 
 static struct regulator_ops twl4030ldo_ops = {
 	.list_voltage	= twl4030ldo_list_voltage,
 
 	.set_voltage_sel = twl4030ldo_set_voltage_sel,
-	.get_voltage	= twl4030ldo_get_voltage,
+	.get_voltage_sel = twl4030ldo_get_voltage_sel,
 
 	.enable		= twl4030reg_enable,
 	.disable	= twl4030reg_disable,

include/linux/regulator/driver.h

@@ -199,6 +199,8 @@ enum regulator_type {
  *                output when using regulator_set_voltage_sel_regmap
  * @enable_reg: Register for control when using regmap enable/disable ops
  * @enable_mask: Mask for control when using regmap enable/disable ops
+ * @bypass_reg: Register for control when using regmap set_bypass
+ * @bypass_mask: Mask for control when using regmap set_bypass
  *
  * @enable_time: Time taken for initial enable of regulator (in uS).
  */