Commit d360892d authored by Nishanth Menon's avatar Nishanth Menon Committed by Jason Cooper

irqchip: crossbar: Allow for quirky hardware with direct hardwiring of GIC

On certain platforms such as DRA7, SPIs 0, 1, 2, 3, 5, 6, 10, 131,
132, 133 are direct wired to hardware blocks bypassing crossbar.
This quirky implementation is *NOT* supposed to be the expectation
of crossbar hardware usage. However, these are already marked in our
description of the hardware with SKIP and RESERVED where appropriate.

Unfortunately, we need to be able to refer to these hardwired IRQs.
So, to request these, crossbar driver can use the existing information
from it's table that these SKIP/RESERVED maps are direct wired sources
and generic allocation/programming of crossbar should be avoided.
Signed-off-by: default avatarNishanth Menon <nm@ti.com>
Signed-off-by: default avatarSricharan R <r.sricharan@ti.com>
Acked-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
Link: https://lkml.kernel.org/r/1403766634-18543-17-git-send-email-r.sricharan@ti.comSigned-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 9a34f73f
...@@ -44,8 +44,10 @@ Documentation/devicetree/bindings/arm/gic.txt for further details. ...@@ -44,8 +44,10 @@ Documentation/devicetree/bindings/arm/gic.txt for further details.
An interrupt consumer on an SoC using crossbar will use: An interrupt consumer on an SoC using crossbar will use:
interrupts = <GIC_SPI request_number interrupt_level> interrupts = <GIC_SPI request_number interrupt_level>
request number shall be between 0 to that described by When the request number is between 0 to that described by
"ti,max-crossbar-sources" "ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
quirky hardware mapping direct to GIC.
Example: Example:
device_x@0x4a023000 { device_x@0x4a023000 {
...@@ -53,3 +55,9 @@ Example: ...@@ -53,3 +55,9 @@ Example:
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
... ...
}; };
device_y@0x4a033000 {
/* Direct mapped GIC SPI 1 used */
interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
...
};
...@@ -86,8 +86,13 @@ static inline int allocate_free_irq(int cb_no) ...@@ -86,8 +86,13 @@ static inline int allocate_free_irq(int cb_no)
static inline bool needs_crossbar_write(irq_hw_number_t hw) static inline bool needs_crossbar_write(irq_hw_number_t hw)
{ {
if (hw > GIC_IRQ_START) int cb_no;
return true;
if (hw > GIC_IRQ_START) {
cb_no = cb->irq_map[hw - GIC_IRQ_START];
if (cb_no != IRQ_RESERVED && cb_no != IRQ_SKIP)
return true;
}
return false; return false;
} }
...@@ -130,8 +135,19 @@ static int crossbar_domain_xlate(struct irq_domain *d, ...@@ -130,8 +135,19 @@ static int crossbar_domain_xlate(struct irq_domain *d,
{ {
int ret; int ret;
int req_num = intspec[1]; int req_num = intspec[1];
int direct_map_num;
if (req_num >= cb->max_crossbar_sources) { if (req_num >= cb->max_crossbar_sources) {
direct_map_num = req_num - cb->max_crossbar_sources;
if (direct_map_num < cb->int_max) {
ret = cb->irq_map[direct_map_num];
if (ret == IRQ_RESERVED || ret == IRQ_SKIP) {
/* We use the interrupt num as h/w irq num */
ret = direct_map_num;
goto found;
}
}
pr_err("%s: requested crossbar number %d > max %d\n", pr_err("%s: requested crossbar number %d > max %d\n",
__func__, req_num, cb->max_crossbar_sources); __func__, req_num, cb->max_crossbar_sources);
return -EINVAL; return -EINVAL;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment