Staging: rtl8187se: Remove card8185 variable to simplify flow

When this code is used for the rtl8187se, the value of card_8185
in struct r8180_priv is always 7 or 8. As a result, the program
flow can be simplified.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Bernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rtl8187se/r8180.h

@@ -77,21 +77,6 @@ typedef enum _WIRELESS_MODE {
 	WIRELESS_MODE_AUTO = 0x08,
 } WIRELESS_MODE;
 
-typedef enum _VERSION_8185{
-	// RTL8185
-	VERSION_8185_UNKNOWN,
-	VERSION_8185_C, // C-cut
-	VERSION_8185_D, // D-cut
-	// RTL8185B
-	VERSION_8185B_B, // B-cut
-	VERSION_8185B_D, // D-cut
-	VERSION_8185B_E, // E-cut
-	//RTL8187S-PCIE
-	VERSION_8187S_B, // B-cut
-	VERSION_8187S_C, // C-cut
-	VERSION_8187S_D, // D-cut
-
-}VERSION_8185,*PVERSION_8185;
 typedef struct 	ChnlAccessSetting {
 	u16 SIFS_Timer;
 	u16 DIFS_Timer;
@@ -341,8 +326,6 @@ typedef struct r8180_priv
 	int irq;
 	struct ieee80211_device *ieee80211;
 
-        short card_8185; /* O: rtl8180, 1:rtl8185 V B/C, 2:rtl8185 V D, 3:rtl8185B */
-	short card_8185_Bversion; /* if TCR reports card V B/C this discriminates */
 	short phy_ver; /* meaningful for rtl8225 1:A 2:B 3:C */
 	short enable_gpio0;
 	enum card_type {PCI,MINIPCI,CARDBUS,USB/*rtl8187*/}card_type;

drivers/staging/rtl8187se/r8180_dm.c

@@ -197,7 +197,6 @@ DIG_Zebra(
 	{ // Advised from SD3 DZ
 		priv->InitialGain = 4; // In 87B, m74dBm means State 4 (m82dBm)
 	}
-	//if(pHalData->VersionID != VERSION_8187B_B)
 	{ // Advised from SD3 DZ
 		OfdmFA1 =  0x20;
 	}

drivers/staging/rtl8187se/r8180_rtl8225z2.c

@@ -445,7 +445,6 @@ s8 DbmToTxPwrIdx(struct r8180_priv *priv, WIRELESS_MODE WirelessMode,
 	 * OFDM Power in dBm = Index * 0.5 + 0
 	 * CCK Power in dBm = Index * 0.25 + 13
 	 */
-	if (priv->card_8185 >= VERSION_8187S_B) {
 	s32 tmp = 0;
 
 	if (WirelessMode == WIRELESS_MODE_G) {
@@ -462,14 +461,13 @@ s8 DbmToTxPwrIdx(struct r8180_priv *priv, WIRELESS_MODE WirelessMode,
 		bUseDefault = false;
 		tmp = (4 * PowerInDbm) - 52;
 
-			if(tmp < 0)
+		if (tmp < 0)
 			TxPwrIdx = 0;
 		else if (tmp > 28) /* 28 means 20 dBm. */
 			TxPwrIdx = 28;
 		else
 			TxPwrIdx = (s8)tmp;
 	}
-	}
 
 	/*
 	 * TRUE if we want to use a default implementation.

drivers/staging/rtl8187se/r8185b_init.c

@@ -1023,6 +1023,7 @@ ZEBRA_Config_85BASIC_HardCode(
 	u32	addr,data;
 	u32	u4bRegOffset, u4bRegValue, u4bRF23, u4bRF24;
        u8			u1b24E;
+	int d_cut = 0;
 
 
 	//=============================================================================
@@ -1035,8 +1036,10 @@ ZEBRA_Config_85BASIC_HardCode(
 	u4bRF23= RF_ReadReg(dev, 0x08);			mdelay(1);
 	u4bRF24= RF_ReadReg(dev, 0x09);			mdelay(1);
 
-	if (u4bRF23==0x818 && u4bRF24==0x70C && priv->card_8185 == VERSION_8187S_C)
-		priv->card_8185 = VERSION_8187S_D;
+	if (u4bRF23 == 0x818 && u4bRF24 == 0x70C) {
+		d_cut = 1;
+		printk(KERN_INFO "rtl8187se: card type changed from C- to D-cut\n");
+	}
 
 	// Page0 : reg0-reg15
 
@@ -1070,18 +1073,9 @@ ZEBRA_Config_85BASIC_HardCode(
 
 	RF_WriteReg(dev, 0x03, 0x0806);			mdelay(1);
 
-	if(priv->card_8185 < VERSION_8187S_C)
-	{
-		RF_WriteReg(dev, 0x04, 0x03f7);			mdelay(1);
-		RF_WriteReg(dev, 0x05, 0x05ab);			mdelay(1);
-		RF_WriteReg(dev, 0x06, 0x00c1);			mdelay(1);
-	}
-	else
-	{
 	RF_WriteReg(dev, 0x04, 0x03a7);			mdelay(1);
 	RF_WriteReg(dev, 0x05, 0x059b);			mdelay(1);
 	RF_WriteReg(dev, 0x06, 0x0081);			mdelay(1);
-	}
 
 
 	RF_WriteReg(dev, 0x07, 0x01A0);			mdelay(1);
@@ -1091,14 +1085,11 @@ ZEBRA_Config_85BASIC_HardCode(
 	RF_WriteReg(dev, 0x0a, 0x0001);			mdelay(1);
 	RF_WriteReg(dev, 0x0b, 0x0418);			mdelay(1);
 
-	if(priv->card_8185 == VERSION_8187S_D)
-	{
+	if (d_cut) {
 		RF_WriteReg(dev, 0x0c, 0x0fbe);			mdelay(1);
 		RF_WriteReg(dev, 0x0d, 0x0008);			mdelay(1);
 		RF_WriteReg(dev, 0x0e, 0x0807);			mdelay(1); // RX LO buffer
-	}
-	else
-	{
+	} else {
 		RF_WriteReg(dev, 0x0c, 0x0fbe);			mdelay(1);
 		RF_WriteReg(dev, 0x0d, 0x0008);			mdelay(1);
 		RF_WriteReg(dev, 0x0e, 0x0806);			mdelay(1); // RX LO buffer