Skip to content

L
linux
Commit d4cebe4d authored by Leo Kim's avatar Leo Kim Committed by Greg Kroah-Hartman
Browse files
Options

staging: wilc1000: wilc_wlan_if.h: remove warnings line over 80 characters 

This patch removes the warnings reported by checkpatch.pl for line over 80
characters. And also align comments which is not over 80 but to align with them.
Signed-off-by: default avatarLeo Kim <leo.kim@atmel.com>
Signed-off-by: default avatarGlen Lee <glen.lee@atmel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 12dc9e4e
Hide whitespace changes
Inline Side-by-side
Showing with 369 additions and 275 deletions
drivers/staging/wilc1000/wilc_wlan_if.h
View file @ d4cebe4d
/* ////////////////////////////////////////////////////////////////////////// */ /* ///////////////////////////////////////////////////////////////////////// */
/* */ /* */
/* Copyright (c) Atmel Corporation. All rights reserved. */ /* Copyright (c) Atmel Corporation. All rights reserved. */
/* */ /* */
...@@ -165,7 +165,8 @@ typedef struct { ...@@ -165,7 +165,8 @@ typedef struct {
int (*wlan_cfg_set)(int, u32, u8 *, u32, int, u32); int (*wlan_cfg_set)(int, u32, u8 *, u32, int, u32);
int (*wlan_cfg_get)(int, u32, int, u32); int (*wlan_cfg_get)(int, u32, int, u32);
int (*wlan_cfg_get_value)(u32, u8 *, u32); int (*wlan_cfg_get_value)(u32, u8 *, u32);
int (*wlan_add_mgmt_to_tx_que)(void *, u8 *, u32, wilc_tx_complete_func_t); int (*wlan_add_mgmt_to_tx_que)(void *, u8 *, u32,
wilc_tx_complete_func_t);
} wilc_wlan_oup_t; } wilc_wlan_oup_t;
/******************************************** /********************************************
...@@ -213,16 +214,16 @@ typedef enum { ...@@ -213,16 +214,16 @@ typedef enum {
} TX_RATE_T; } TX_RATE_T;
typedef enum { typedef enum {
B_ONLY_MODE = 0, /* basic rate: 1, 2 Mbps, otherwise: 5, 11 Mbps */ B_ONLY_MODE = 0, /* 1, 2 M, otherwise: 5, 11 M */
G_ONLY_MODE, /* basic rate: 6, 12, 24 Mbps, otherwise: 9, 18, 36, 48, 54 Mbps */ G_ONLY_MODE, /* 6, 12, 24 M, otherwise: 9, 18, 36, 48, 54 M */
G_MIXED_11B_1_MODE, /* basic rate: 1, 2, 5.5, 11 Mbps, otherwise: all on */ G_MIXED_11B_1_MODE, /* 1, 2, 5.5, 11 M, otherwise: all on */
G_MIXED_11B_2_MODE, /* basic rate: 1, 2, 5, 11, 6, 12, 24 Mbps, otherwise: all on */ G_MIXED_11B_2_MODE, /* 1, 2, 5, 11, 6, 12, 24 M, otherwise: all on */
} G_OPERATING_MODE_T; } G_OPERATING_MODE_T;
typedef enum { typedef enum {
G_SHORT_PREAMBLE = 0, /* Short Preamble */ G_SHORT_PREAMBLE = 0, /* Short Preamble */
G_LONG_PREAMBLE = 1, /* Long Preamble */ G_LONG_PREAMBLE = 1, /* Long Preamble */
G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */ G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */
} G_PREAMBLE_T; } G_PREAMBLE_T;
#define MAC_CONNECTED 1 #define MAC_CONNECTED 1
...@@ -345,10 +346,10 @@ typedef enum { ...@@ -345,10 +346,10 @@ typedef enum {
} N_OBSS_DETECTION_T; } N_OBSS_DETECTION_T;
typedef enum { typedef enum {
RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */ RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */
FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */ FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */
LSIG_TXOP_PROT, /* LSIG TXOP Protection */ LSIG_TXOP_PROT, /* LSIG TXOP Protection */
FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */ FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */
} N_PROTECTION_TYPE_T; } N_PROTECTION_TYPE_T;
typedef enum { typedef enum {
...@@ -383,237 +384,298 @@ typedef enum { ...@@ -383,237 +384,298 @@ typedef enum {
typedef enum { typedef enum {
WID_NIL = 0xffff, WID_NIL = 0xffff,
/* BSS Type */ /*
/* -------------------------------------------------------------- */ * BSS Type
/* Configuration : Infrastructure Independent Access Point */ * -----------------------------------------------------------
/* Values to set : 0 1 2 */ * Configuration : Infrastructure Independent Access Point
/* -------------------------------------------------------------- */ * Values to set : 0 1 2
* -----------------------------------------------------------
*/
WID_BSS_TYPE = 0x0000, WID_BSS_TYPE = 0x0000,
/* Transmit Rate */ /*
/* -------------------------------------------------------------- */ * Transmit Rate
/* Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 */ * -----------------------------------------------------------
/* Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 */ * Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54
/* -------------------------------------------------------------- */ * Values to set : 1 2 5 11 6 9 12 18 24 36 48 54
* -----------------------------------------------------------
*/
WID_CURRENT_TX_RATE = 0x0001, WID_CURRENT_TX_RATE = 0x0001,
/* Channel */ /*
/* ------------------------------------------------------------------- */ * Channel
/* Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ * -----------------------------------------------------------
/* Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ * Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14
/* -------------------------------------------------------------------- */ * Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14
* -----------------------------------------------------------
*/
WID_CURRENT_CHANNEL = 0x0002, WID_CURRENT_CHANNEL = 0x0002,
/* Preamble */ /*
/* -------------------------------------------------------------- */ * Preamble
/* Configuration : short long Auto */ * -----------------------------------------------------------
/* Values to set : 0 1 2 */ * Configuration : short long Auto
/* -------------------------------------------------------------- */ * Values to set : 0 1 2
* -----------------------------------------------------------
*/
WID_PREAMBLE = 0x0003, WID_PREAMBLE = 0x0003,
/* 11g operating mode (ignored if 11g not present) */ /*
/* -------------------------------------------------------------- */ * 11g operating mode (ignored if 11g not present)
/* Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) */ * -----------------------------------------------------------
/* Values to set : 1 2 3 */ * Configuration : HighPerf Compat(RSet #1) Compat(RSet #2)
/* -------------------------------------------------------------- */ * Values to set : 1 2 3
* -----------------------------------------------------------
*/
WID_11G_OPERATING_MODE = 0x0004, WID_11G_OPERATING_MODE = 0x0004,
/* Mac status (response only) */ /*
/* -------------------------------------------------------------- */ * Mac status (response only)
/* Configuration : disconnect connect */ * -----------------------------------------------------------
/* Values to get : 0 1 */ * Configuration : disconnect connect
/* -------------------------------------------------------------- */ * Values to get : 0 1
* -----------------------------------------------------------
*/
WID_STATUS = 0x0005, WID_STATUS = 0x0005,
/* Scan type */ /*
/* -------------------------------------------------------------- */ * Scan type
/* Configuration : Passive Scanning Active Scanning */ * -----------------------------------------------------------
/* Values to set : 0 1 */ * Configuration : Passive Scanning Active Scanning
/* -------------------------------------------------------------- */ * Values to set : 0 1
* -----------------------------------------------------------
*/
WID_SCAN_TYPE = 0x0007, WID_SCAN_TYPE = 0x0007,
/* Key Id (WEP default key Id) */ /*
/* -------------------------------------------------------------- */ * Key Id (WEP default key Id)
/* Configuration : Any value between 0 to 3 */ * -----------------------------------------------------------
/* Values to set : Same value. Default is 0 */ * Configuration : Any value between 0 to 3
/* -------------------------------------------------------------- */ * Values to set : Same value. Default is 0
* -----------------------------------------------------------
*/
WID_KEY_ID = 0x0009, WID_KEY_ID = 0x0009,
/* QoS Enable */ /*
/* -------------------------------------------------------------- */ * QoS Enable
/* Configuration : QoS Disable WMM Enable */ * -----------------------------------------------------------
/* Values to set : 0 1 */ * Configuration : QoS Disable WMM Enable
/* -------------------------------------------------------------- */ * Values to set : 0 1
* -----------------------------------------------------------
*/
WID_QOS_ENABLE = 0x000A, WID_QOS_ENABLE = 0x000A,
/* Power Management */ /*
/* ------------------------------------------------------------------ */ * Power Management
/* Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE */ * -----------------------------------------------------------
/* Values to set : 0 1 2 */ * Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE
/* ------------------------------------------------------------------ */ * Values to set : 0 1 2
* -----------------------------------------------------------
*/
WID_POWER_MANAGEMENT = 0x000B, WID_POWER_MANAGEMENT = 0x000B,
/* WEP/802 11I Configuration */ /*
/* ------------------------------------------------------------------ */ * WEP/802 11I Configuration
/* Configuration : Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP */ * -----------------------------------------------------------
/* Values (0x) : 00 03 07 29 49 31 51 */ * Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP
/* */ * Values (0x) : 00 03 07 29 49 31 51
/* Configuration : WPA-AES+TKIP RSN-AES+TKIP */ * Configuration:WPA-AES+TKIP RSN-AES+TKIP
/* Values (0x) : 69 71 */ * Values (0x) : 69 71
/* ------------------------------------------------------------------ */ * -----------------------------------------------------------
*/
WID_11I_MODE = 0x000C, WID_11I_MODE = 0x000C,
/* WEP Configuration: Used in BSS STA mode only when WEP is enabled */ /*
/* ------------------------------------------------------------------ */ * WEP Configuration: Used in BSS STA mode only when WEP is enabled
/* Configuration : Open System Shared Key Any Type | 802.1x Auth */ * -----------------------------------------------------------
/* Values (0x) : 01 02 03 | BIT2 */ * Configuration : Open System Shared Key Any Type | 802.1x Auth
/* ------------------------------------------------------------------ */ * Values (0x) : 01 02 03 | BIT2
* -----------------------------------------------------------
*/
WID_AUTH_TYPE = 0x000D, WID_AUTH_TYPE = 0x000D,
/* Site Survey Type */ /*
/* -------------------------------------------------------------- */ * Site Survey Type
/* Configuration : Values to set */ * -----------------------------------------------------------
/* Survey 1 Channel : 0 */ * Configuration : Values to set
/* survey all Channels : 1 */ * Survey 1 Channel : 0
/* Disable Site Survey : 2 */ * survey all Channels : 1
/* -------------------------------------------------------------- */ * Disable Site Survey : 2
* -----------------------------------------------------------
*/
WID_SITE_SURVEY = 0x000E, WID_SITE_SURVEY = 0x000E,
/* Listen Interval */ /*
/* -------------------------------------------------------------- */ * Listen Interval
/* Configuration : Any value between 1 to 255 */ * -----------------------------------------------------------
/* Values to set : Same value. Default is 3 */ * Configuration : Any value between 1 to 255
/* -------------------------------------------------------------- */ * Values to set : Same value. Default is 3
* -----------------------------------------------------------
*/
WID_LISTEN_INTERVAL = 0x000F, WID_LISTEN_INTERVAL = 0x000F,
/* DTIM Period */ /*
/* -------------------------------------------------------------- */ * DTIM Period
/* Configuration : Any value between 1 to 255 */ * -----------------------------------------------------------
/* Values to set : Same value. Default is 3 */ * Configuration : Any value between 1 to 255
/* -------------------------------------------------------------- */ * Values to set : Same value. Default is 3
* -----------------------------------------------------------
*/
WID_DTIM_PERIOD = 0x0010, WID_DTIM_PERIOD = 0x0010,
/* ACK Policy */ /*
/* -------------------------------------------------------------- */ * ACK Policy
/* Configuration : Normal Ack No Ack */ * -----------------------------------------------------------
/* Values to set : 0 1 */ * Configuration : Normal Ack No Ack
/* -------------------------------------------------------------- */ * Values to set : 0 1
* -----------------------------------------------------------
*/
WID_ACK_POLICY = 0x0011, WID_ACK_POLICY = 0x0011,
/* Reset MAC (Set only) */ /*
/* -------------------------------------------------------------- */ * Reset MAC (Set only)
/* Configuration : Don't Reset Reset No Request */ * -----------------------------------------------------------
/* Values to set : 0 1 2 */ * Configuration : Don't Reset Reset No Request
/* -------------------------------------------------------------- */ * Values to set : 0 1 2
* -----------------------------------------------------------
*/
WID_RESET = 0x0012, WID_RESET = 0x0012,
/* Broadcast SSID Option: Setting this will adhere to "" SSID element */ /*
/* ------------------------------------------------------------------ */ * Broadcast SSID Option: Setting this will adhere to "" SSID element
/* Configuration : Enable Disable */ * -----------------------------------------------------------
/* Values to set : 1 0 */ * Configuration : Enable Disable
/* ------------------------------------------------------------------ */ * Values to set : 1 0
* -----------------------------------------------------------
*/
WID_BCAST_SSID = 0x0015, WID_BCAST_SSID = 0x0015,
/* Disconnect (Station) */ /*
/* ------------------------------------------------------------------ */ * Disconnect (Station)
/* Configuration : Association ID */ * -----------------------------------------------------------
/* Values to set : Association ID */ * Configuration : Association ID
/* ------------------------------------------------------------------ */ * Values to set : Association ID
* -----------------------------------------------------------
*/
WID_DISCONNECT = 0x0016, WID_DISCONNECT = 0x0016,
/* 11a Tx Power Level */ /*
/* -------------------------------------------------------------------- */ * 11a Tx Power Level
/* Configuration : Sets TX Power (Higher the value greater the power) */ * -----------------------------------------------------------
/* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/ * Configuration : Sets TX Power (Higher the value greater the power)
/* -------------------------------------------------------------------- */ * Values to set : Any value between 0 and 63 (inclusive Default 48)
* -----------------------------------------------------------
*/
WID_TX_POWER_LEVEL_11A = 0x0018, WID_TX_POWER_LEVEL_11A = 0x0018,
/* Group Key Update Policy Selection */ /*
/* -------------------------------------------------------------------- */ * Group Key Update Policy Selection
/* Configuration : Disabled timeBased packetBased timePacketBased */ * -----------------------------------------------------------
/* Values to set : 1 2 3 4 */ * Configuration : Disabled timeBased packetBased timePacketBased
/* -------------------------------------------------------------------- */ * Values to set : 1 2 3 4
* -----------------------------------------------------------
*/
WID_REKEY_POLICY = 0x0019, WID_REKEY_POLICY = 0x0019,
/* Allow Short Slot */ /*
/* -------------------------------------------------------------- */ * Allow Short Slot
/* Configuration : Disallow Short Slot Allow Short Slot */ * -----------------------------------------------------------
/* (Enable Only Long Slot) (Enable Short Slot if applicable)*/ * Configuration : Disallow Short Slot Allow Short Slot
/* Values to set : 0 1 */ * (Enable Only Long Slot) (Enable Short Slot if applicable)
/* -------------------------------------------------------------- */ * Values to set : 0 1
* -----------------------------------------------------------
*/
WID_SHORT_SLOT_ALLOWED = 0x001A, WID_SHORT_SLOT_ALLOWED = 0x001A,
WID_PHY_ACTIVE_REG = 0x001B, WID_PHY_ACTIVE_REG = 0x001B,
/* 11b Tx Power Level */ /*
/* -------------------------------------------------------------------- */ * 11b Tx Power Level
/* Configuration : Sets TX Power (Higher the value greater the power) */ * -----------------------------------------------------------
/* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/ * Configuration : Sets TX Power (Higher the value greater the power)
/* -------------------------------------------------------------------- */ * Values to set : Any value between 0 and 63 (inclusive Default 48)
* -----------------------------------------------------------
*/
WID_TX_POWER_LEVEL_11B = 0x001D, WID_TX_POWER_LEVEL_11B = 0x001D,
/* Scan Request */ /*
/* -------------------------------------------------------------------- */ * Scan Request
/* Configuration : Request default scan */ * -----------------------------------------------------------
/* Values to set : 0 */ * Configuration : Request default scan
/* -------------------------------------------------------------------- */ * Values to set : 0
* -----------------------------------------------------------
*/
WID_START_SCAN_REQ = 0x001E, WID_START_SCAN_REQ = 0x001E,
/* Rssi (get only) */ /*
/* -------------------------------------------------------------------- */ * Rssi (get only)
/* Configuration : */ * -----------------------------------------------------------
/* Values to get : Rssi value */ * Configuration :
/* -------------------------------------------------------------------- */ * Values to get : Rssi value
* -----------------------------------------------------------
*/
WID_RSSI = 0x001F, WID_RSSI = 0x001F,
/* Join Request */ /*
/* -------------------------------------------------------------------- */ * Join Request
/* Configuration : Request to join */ * -----------------------------------------------------------
/* Values to set : index of scan result */ * Configuration : Request to join
/* -------------------------------------------------------------------- */ * Values to set : index of scan result
* -----------------------------------------------------------
*/
WID_JOIN_REQ = 0x0020, WID_JOIN_REQ = 0x0020,
WID_LINKSPEED = 0x0026, WID_LINKSPEED = 0x0026,
/* Enable User Control of TX Power */ /*
/* -------------------------------------------------------------------- */ * Enable User Control of TX Power
/* Configuration : Disable Enable */ * -----------------------------------------------------------
/* Values to set : 0 1 */ * Configuration : Disable Enable
/* -------------------------------------------------------------------- */ * Values to set : 0 1
* -----------------------------------------------------------
*/
WID_USER_CONTROL_ON_TX_POWER = 0x0027, WID_USER_CONTROL_ON_TX_POWER = 0x0027,
WID_MEMORY_ACCESS_8BIT = 0x0029, WID_MEMORY_ACCESS_8BIT = 0x0029,
/* Enable Auto RX Sensitivity feature */ /*
/* -------------------------------------------------------------------- */ * Enable Auto RX Sensitivity feature
/* Configuration : Disable Enable */ * -----------------------------------------------------------
/* Values to set : 0 1 */ * Configuration : Disable Enable
/* -------------------------------------------------------------------- */ * Values to set : 0 1
* -----------------------------------------------------------
*/
WID_AUTO_RX_SENSITIVITY = 0x0032, WID_AUTO_RX_SENSITIVITY = 0x0032,
/* Receive Buffer Based Ack */ /*
/* -------------------------------------------------------------------- */ * Receive Buffer Based Ack
/* Configuration : Disable Enable */ * -----------------------------------------------------------
/* Values to set : 0 1 */ * Configuration : Disable Enable
/* -------------------------------------------------------------------- */ * Values to set : 0 1
* -----------------------------------------------------------
*/
WID_DATAFLOW_CONTROL = 0x0033, WID_DATAFLOW_CONTROL = 0x0033,
/* Scan Filter */ /*
/* -------------------------------------------------------------------- */ * Scan Filter
/* Configuration : Class No filter AP only Station Only */ * -----------------------------------------------------------
/* Values to set : 0 1 2 */ * Configuration : Class No filter AP only Station Only
/* Configuration : Priority High Rssi Low Rssi Detect */ * Values to set : 0 1 2
/* Values to set : 0 0x4 0x08 */ * Configuration : Priority High Rssi Low Rssi Detect
/* Configuration : Channel filter off filter on */ * Values to set : 0 0x4 0x0
/* Values to set : 0 0x10 */ * Configuration : Channel filter off filter on
/* -------------------------------------------------------------------- */ * Values to set : 0 0x10
* -----------------------------------------------------------
*/
WID_SCAN_FILTER = 0x0036, WID_SCAN_FILTER = 0x0036,
/* Link Loss Threshold (measure in the beacon period) */ /*
/* -------------------------------------------------------------------- */ * Link Loss Threshold (measure in the beacon period)
/* Configuration : Any value between 10 and 254 (Set to 255 to disable it) */ * -----------------------------------------------------------
/* Values to set : Same value. Default is 10 */ * Configuration : Any value between 10 and 254(Set to 255 disable)
/* -------------------------------------------------------------------- */ * Values to set : Same value. Default is 10
* -----------------------------------------------------------
*/
WID_LINK_LOSS_THRESHOLD = 0x0037, WID_LINK_LOSS_THRESHOLD = 0x0037,
WID_ABORT_RUNNING_SCAN = 0x003E, WID_ABORT_RUNNING_SCAN = 0x003E,
...@@ -621,103 +683,127 @@ typedef enum { ...@@ -621,103 +683,127 @@ typedef enum {
/* NMAC Character WID list */ /* NMAC Character WID list */
WID_WPS_START = 0x0043, WID_WPS_START = 0x0043,
/* Protection mode for MAC */ /*
/* -------------------------------------------------------------- */ * Protection mode for MAC
/* Configuration : Auto No protection ERP HT GF */ * -----------------------------------------------------------
/* Values to set : 0 1 2 3 4 */ * Configuration : Auto No protection ERP HT GF
/* -------------------------------------------------------------- */ * Values to set : 0 1 2 3 4
* -----------------------------------------------------------
*/
WID_11N_PROT_MECH = 0x0080, WID_11N_PROT_MECH = 0x0080,
/* ERP Protection type for MAC */ /*
/* -------------------------------------------------------------- */ * ERP Protection type for MAC
/* Configuration : Self-CTS RTS-CTS */ * -----------------------------------------------------------
/* Values to set : 0 1 */ * Configuration : Self-CTS RTS-CTS
/* -------------------------------------------------------------- */ * Values to set : 0 1
* -----------------------------------------------------------
*/
WID_11N_ERP_PROT_TYPE = 0x0081, WID_11N_ERP_PROT_TYPE = 0x0081,
/* HT Option Enable */ /*
/* -------------------------------------------------------------- */ * HT Option Enable
/* Configuration : HT Enable HT Disable */ * -----------------------------------------------------------
/* Values to set : 1 0 */ * Configuration : HT Enable HT Disable
/* -------------------------------------------------------------- */ * Values to set : 1 0
* -----------------------------------------------------------
*/
WID_11N_ENABLE = 0x0082, WID_11N_ENABLE = 0x0082,
/* 11n Operating mode (Note that 11g operating mode will also be */ /*
/* used in addition to this, if this is set to HT Mixed mode) */ * 11n Operating mode (Note that 11g operating mode will also be
/* -------------------------------------------------------------- */ * used in addition to this, if this is set to HT Mixed mode)
/* Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz */ * -----------------------------------------------------------
/* Values to set : 1 2 3 */ * Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz
/* -------------------------------------------------------------- */ * Values to set : 1 2 3
* -----------------------------------------------------------
*/
WID_11N_OPERATING_MODE = 0x0083, WID_11N_OPERATING_MODE = 0x0083,
/* 11n OBSS non-HT STA Detection flag */ /*
/* -------------------------------------------------------------- */ * 11n OBSS non-HT STA Detection flag
/* Configuration : Do not detect */ * -----------------------------------------------------------
/* Values to set : 0 */ * Configuration : Do not detect
/* Configuration : Detect, do not protect or report */ * Values to set : 0
/* Values to set : 1 */ * Configuration : Detect, do not protect or report
/* Configuration : Detect, protect and do not report */ * Values to set : 1
/* Values to set : 2 */ * Configuration : Detect, protect and do not report
/* Configuration : Detect, protect and report to other BSS */ * Values to set : 2
/* Values to set : 3 */ * Configuration : Detect, protect and report to other BSS
/* -------------------------------------------------------------- */ * Values to set : 3
* -----------------------------------------------------------
*/
WID_11N_OBSS_NONHT_DETECTION = 0x0084, WID_11N_OBSS_NONHT_DETECTION = 0x0084,
/* 11n HT Protection Type */ /*
/* -------------------------------------------------------------- */ * 11n HT Protection Type
/* Configuration : RTS-CTS First Frame Exchange at non-HT-rate */ * -----------------------------------------------------------
/* Values to set : 0 1 */ * Configuration : RTS-CTS First Frame Exchange at non-HT-rate
/* Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt */ * Values to set : 0 1
/* Values to set : 2 3 */ * Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt
/* -------------------------------------------------------------- */ * Values to set : 2 3
* -----------------------------------------------------------
*/
WID_11N_HT_PROT_TYPE = 0x0085, WID_11N_HT_PROT_TYPE = 0x0085,
/* 11n RIFS Protection Enable Flag */ /*
/* -------------------------------------------------------------- */ * 11n RIFS Protection Enable Flag
/* Configuration : Disable Enable */ * -----------------------------------------------------------
/* Values to set : 0 1 */ * Configuration : Disable Enable
/* -------------------------------------------------------------- */ * Values to set : 0 1
* -----------------------------------------------------------
*/
WID_11N_RIFS_PROT_ENABLE = 0x0086, WID_11N_RIFS_PROT_ENABLE = 0x0086,
/* SMPS Mode */ /*
/* -------------------------------------------------------------- */ * SMPS Mode
/* Configuration : Static Dynamic MIMO (Power Save Disabled) */ * -----------------------------------------------------------
/* Values to set : 1 2 3 */ * Configuration : Static Dynamic MIMO (Power Save Disabled)
/* -------------------------------------------------------------- */ * Values to set : 1 2 3
* -----------------------------------------------------------
*/
WID_11N_SMPS_MODE = 0x0087, WID_11N_SMPS_MODE = 0x0087,
/* Current transmit MCS */ /*
/* -------------------------------------------------------------- */ * Current transmit MCS
/* Configuration : MCS Index for data rate */ * -----------------------------------------------------------
/* Values to set : 0 to 7 */ * Configuration : MCS Index for data rate
/* -------------------------------------------------------------- */ * Values to set : 0 to 7
* -----------------------------------------------------------
*/
WID_11N_CURRENT_TX_MCS = 0x0088, WID_11N_CURRENT_TX_MCS = 0x0088,
WID_11N_PRINT_STATS = 0x0089, WID_11N_PRINT_STATS = 0x0089,
/* 11n Short GI Enable Flag */ /*
/* -------------------------------------------------------------- */ * 11n Short GI Enable Flag
/* Configuration : Disable Enable */ * -----------------------------------------------------------
/* Values to set : 0 1 */ * Configuration : Disable Enable
/* -------------------------------------------------------------- */ * Values to set : 0 1
* -----------------------------------------------------------
*/
WID_11N_SHORT_GI_ENABLE = 0x008D, WID_11N_SHORT_GI_ENABLE = 0x008D,
/* 11n RIFS Enable Flag */ /*
/* -------------------------------------------------------------- */ * 11n RIFS Enable Flag
/* Configuration : Disable Enable */ * -----------------------------------------------------------
/* Values to set : 0 1 */ * Configuration : Disable Enable
/* -------------------------------------------------------------- */ * Values to set : 0 1
* -----------------------------------------------------------
*/
WID_RIFS_MODE = 0x0094, WID_RIFS_MODE = 0x0094,
/* TX Abort Feature */ /*
/* -------------------------------------------------------------- */ * TX Abort Feature
/* Configuration : Disable Self CTS Enable Self CTS */ * -----------------------------------------------------------
/* Values to set : 0 1 */ * Configuration : Disable Self CTS Enable Self CTS
/* Configuration : Disable TX Abort Enable TX Abort */ * Values to set : 0 1
/* Values to set : 2 3 */ * Configuration : Disable TX Abort Enable TX Abort
/* Configuration : Enable HW TX Abort Enable SW TX Abort */ * Values to set : 2 3
/* Values to set : 4 5 */ * Configuration : Enable HW TX Abort Enable SW TX Abort
/* -------------------------------------------------------------- */ * Values to set : 4 5
* -----------------------------------------------------------
*/
WID_TX_ABORT_CONFIG = 0x00A1, WID_TX_ABORT_CONFIG = 0x00A1,
WID_REG_TSSI_11B_VALUE = 0x00A6, WID_REG_TSSI_11B_VALUE = 0x00A6,
...@@ -728,18 +814,22 @@ typedef enum { ...@@ -728,18 +814,22 @@ typedef enum {
WID_DSCR_TSSI_11G_VALUE = 0x00AB, WID_DSCR_TSSI_11G_VALUE = 0x00AB,
WID_DSCR_TSSI_11N_VALUE = 0x00AC, WID_DSCR_TSSI_11N_VALUE = 0x00AC,
/* Immediate Block-Ack Support */ /*
/* -------------------------------------------------------------- */ * Immediate Block-Ack Support
/* Configuration : Disable Enable */ * -----------------------------------------------------------
/* Values to set : 0 1 */ * Configuration : Disable Enable
/* -------------------------------------------------------------- */ * Values to set : 0 1
* -----------------------------------------------------------
*/
WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF, WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF,
/* TXOP Disable Flag */ /*
/* -------------------------------------------------------------- */ * TXOP Disable Flag
/* Configuration : Disable Enable */ * -----------------------------------------------------------
/* Values to set : 1 0 */ * Configuration : Disable Enable
/* -------------------------------------------------------------- */ * Values to set : 1 0
* -----------------------------------------------------------
*/
WID_11N_TXOP_PROT_DISABLE = 0x00B0, WID_11N_TXOP_PROT_DISABLE = 0x00B0,
WID_TX_POWER_LEVEL_11N = 0x00B1, WID_TX_POWER_LEVEL_11N = 0x00B1,
...@@ -752,19 +842,23 @@ typedef enum { ...@@ -752,19 +842,23 @@ typedef enum {
WID_DEL_BEACON = 0x00CA, WID_DEL_BEACON = 0x00CA,
WID_LOGTerminal_Switch = 0x00CD, WID_LOGTerminal_Switch = 0x00CD,
/* EMAC Short WID list */ /* EMAC Short WID list */
/* RTS Threshold */ /* RTS Threshold */
/* -------------------------------------------------------------- */ /*
/* Configuration : Any value between 256 to 2347 */ * -----------------------------------------------------------
/* Values to set : Same value. Default is 2347 */ * Configuration : Any value between 256 to 2347
/* -------------------------------------------------------------- */ * Values to set : Same value. Default is 2347
* -----------------------------------------------------------
*/
WID_RTS_THRESHOLD = 0x1000, WID_RTS_THRESHOLD = 0x1000,
/* Fragmentation Threshold */ /*
/* -------------------------------------------------------------- */ * Fragmentation Threshold
/* Configuration : Any value between 256 to 2346 */ * -----------------------------------------------------------
/* Values to set : Same value. Default is 2346 */ * Configuration : Any value between 256 to 2346
/* -------------------------------------------------------------- */ * Values to set : Same value. Default is 2346
* -----------------------------------------------------------
*/
WID_FRAG_THRESHOLD = 0x1001, WID_FRAG_THRESHOLD = 0x1001,
WID_SHORT_RETRY_LIMIT = 0x1002, WID_SHORT_RETRY_LIMIT = 0x1002,
...@@ -849,9 +943,9 @@ typedef enum { ...@@ -849,9 +943,9 @@ typedef enum {
WID_ASSOC_REQ_INFO = 0x301F, WID_ASSOC_REQ_INFO = 0x301F,
WID_ASSOC_RES_INFO = 0x3020, WID_ASSOC_RES_INFO = 0x3020,
WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */ WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */
WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */ WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */
WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */ WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */
WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */ WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */
/* NMAC String WID list */ /* NMAC String WID list */
WID_11N_P_ACTION_REQ = 0x3080, WID_11N_P_ACTION_REQ = 0x3080,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7