omap-dma/omap_vout_vrfb: fix off-by-one fi value

The OMAP 4 TRM specifies that when using double-index addressing
the address increases by the ES plus the EI value minus 1 within
a frame. When a full frame is transferred, the address increases
by the ES plus the frame index (FI) value minus 1.

The omap-dma code didn't account for the 'minus 1' in the FI register.
To get correct addressing, add 1 to the src_icg value.

This was found when testing a hacked version of the media m2m-deinterlace.c
driver on a Pandaboard.

The only other source that uses this feature is omap_vout_vrfb.c,
and that adds a + 1 when setting the dst_icg. This is a workaround
for the broken omap-dma.c behavior. So remove the workaround at the
same time that we fix omap-dma.c.

I tested the omap_vout driver with a Beagle XM board to check that
the '+ 1' in omap_vout_vrfb.c was indeed a workaround for the omap-dma
bug.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/952e7f51-f208-9333-6f58-b7ed20d2ea0b@xs4all.nlSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/dma/ti/omap-dma.c

@@ -1234,7 +1234,7 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_interleaved(
 	if (src_icg) {
 		d->ccr |= CCR_SRC_AMODE_DBLIDX;
 		d->ei = 1;
-		d->fi = src_icg;
+		d->fi = src_icg + 1;
 	} else if (xt->src_inc) {
 		d->ccr |= CCR_SRC_AMODE_POSTINC;
 		d->fi = 0;
@@ -1249,7 +1249,7 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_interleaved(
 	if (dst_icg) {
 		d->ccr |= CCR_DST_AMODE_DBLIDX;
 		sg->ei = 1;
-		sg->fi = dst_icg;
+		sg->fi = dst_icg + 1;
 	} else if (xt->dst_inc) {
 		d->ccr |= CCR_DST_AMODE_POSTINC;
 		sg->fi = 0;

drivers/media/platform/omap/omap_vout_vrfb.c

@@ -253,8 +253,7 @@ int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
 	 */
 
 	pixsize = vout->bpp * vout->vrfb_bpp;
-	dst_icg = ((MAX_PIXELS_PER_LINE * pixsize) -
-		  (vout->pix.width * vout->bpp)) + 1;
+	dst_icg = MAX_PIXELS_PER_LINE * pixsize - vout->pix.width * vout->bpp;
 
 	xt->src_start = vout->buf_phy_addr[vb->i];
 	xt->dst_start = vout->vrfb_context[vb->i].paddr[0];