Commit d55f09ab authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] lirc.h: remove several unused ioctls

While reviewing the documentation gaps on LIRC, it was
noticed that several ioctls aren't used by any LIRC drivers
(nor at staging or mainstream).

It doesn't make sense to document them, as they're not used
anywhere. So, let's remove those from the lirc header.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 2d14c31c
...@@ -90,20 +90,11 @@ ...@@ -90,20 +90,11 @@
#define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) #define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32)
#define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) #define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32)
#define LIRC_GET_SEND_CARRIER _IOR('i', 0x00000003, __u32)
#define LIRC_GET_REC_CARRIER _IOR('i', 0x00000004, __u32)
#define LIRC_GET_SEND_DUTY_CYCLE _IOR('i', 0x00000005, __u32)
#define LIRC_GET_REC_DUTY_CYCLE _IOR('i', 0x00000006, __u32)
#define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) #define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32)
#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) #define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32)
#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) #define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32)
#define LIRC_GET_MIN_FILTER_PULSE _IOR('i', 0x0000000a, __u32)
#define LIRC_GET_MAX_FILTER_PULSE _IOR('i', 0x0000000b, __u32)
#define LIRC_GET_MIN_FILTER_SPACE _IOR('i', 0x0000000c, __u32)
#define LIRC_GET_MAX_FILTER_SPACE _IOR('i', 0x0000000d, __u32)
/* code length in bits, currently only for LIRC_MODE_LIRCCODE */ /* code length in bits, currently only for LIRC_MODE_LIRCCODE */
#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) #define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32)
...@@ -113,7 +104,6 @@ ...@@ -113,7 +104,6 @@
#define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) #define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32)
#define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) #define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32)
#define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) #define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32)
#define LIRC_SET_REC_DUTY_CYCLE _IOW('i', 0x00000016, __u32)
#define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) #define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32)
/* /*
...@@ -126,22 +116,6 @@ ...@@ -126,22 +116,6 @@
/* 1 enables, 0 disables timeout reports in MODE2 */ /* 1 enables, 0 disables timeout reports in MODE2 */
#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) #define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32)
/*
* pulses shorter than this are filtered out by hardware (software
* emulation in lirc_dev?)
*/
#define LIRC_SET_REC_FILTER_PULSE _IOW('i', 0x0000001a, __u32)
/*
* spaces shorter than this are filtered out by hardware (software
* emulation in lirc_dev?)
*/
#define LIRC_SET_REC_FILTER_SPACE _IOW('i', 0x0000001b, __u32)
/*
* if filter cannot be set independently for pulse/space, this should
* be used
*/
#define LIRC_SET_REC_FILTER _IOW('i', 0x0000001c, __u32)
/* /*
* if enabled from the next key press on the driver will send * if enabled from the next key press on the driver will send
* LIRC_MODE2_FREQUENCY packets * LIRC_MODE2_FREQUENCY packets
...@@ -149,20 +123,11 @@ ...@@ -149,20 +123,11 @@
#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) #define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
/* /*
* to set a range use * to set a range use LIRC_SET_REC_CARRIER_RANGE with the
* LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE with the * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound
* lower bound first and later
* LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER with the upper bound
*/ */
#define LIRC_SET_REC_DUTY_CYCLE_RANGE _IOW('i', 0x0000001e, __u32)
#define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) #define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32)
#define LIRC_NOTIFY_DECODE _IO('i', 0x00000020)
#define LIRC_SETUP_START _IO('i', 0x00000021)
#define LIRC_SETUP_END _IO('i', 0x00000022)
#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32) #define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32)
#endif #endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment