Merge tag 'pwm/for-5.11-rc1' of...

Merge tag 'pwm/for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This is a fairly big release cycle from the PWM framework's point of
  view.

  There's a large patcheset here which converts drivers to use the new
  devm_platform_ioremap_resource() helper and a bunch of minor fixes to
  existing drivers. Some of the existing drivers also add support for
  more hardware, such as Atmel SAMA 5D2 and Mediatek MT8183.

  Finally there's a couple of new drivers for Intel Keem Bay and LGM
  SoCs as well as the DesignWare PWM controller"

* tag 'pwm/for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (66 commits)
  pwm: sun4i: Remove erroneous else branch
  pwm: sl28cpld: Set driver data before registering the PWM chip
  pwm: Remove unused function pwmchip_add_inversed()
  pwm: imx27: Fix overflow for bigger periods
  pwm: bcm2835: Support apply function for atomic configuration
  pwm: keembay: Fix build failure with -Os
  pwm: core: Use octal permission
  pwm: lpss: Make compilable with COMPILE_TEST
  pwm: Fix dependencies on HAS_IOMEM
  pwm: Use -EINVAL for unsupported polarity
  pwm: sti: Remove unnecessary blank line
  pwm: sti: Avoid conditional gotos
  pwm: Add PWM fan controller driver for LGM SoC
  Add DT bindings YAML schema for PWM fan controller of LGM SoC
  pwm: Add DesignWare PWM Controller Driver
  dt-bindings: pwm: mtk-disp: add MT8167 SoC binding
  pwm: mediatek: Add MT8183 SoC support
  pwm: mediatek: Always use bus clock
  dt-bindings: pwm: pwm-mediatek: Add documentation for MT8183 SoC
  pwm: Add PWM driver for Intel Keem Bay
  ...

Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt

-Atmel TCB PWM controller
-
-Required properties:
-- compatible: should be "atmel,tcb-pwm"
-- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of
-  the cells format. The only third cell flag supported by this binding is
-  PWM_POLARITY_INVERTED.
-- tc-block: The Timer Counter block to use as a PWM chip.
-
-Example:
-
-pwm {
-	compatible = "atmel,tcb-pwm";
-	#pwm-cells = <3>;
-	tc-block = <1>;
-};

Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/intel,keembay-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay PWM Device Tree Bindings
+
+maintainers:
+  - Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    enum:
+      - intel,keembay-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#pwm-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #define KEEM_BAY_A53_GPIO
+
+    pwm@203200a0 {
+        compatible = "intel,keembay-pwm";
+        reg = <0x203200a0 0xe8>;
+        clocks = <&scmi_clk KEEM_BAY_A53_GPIO>;
+        #pwm-cells = <2>;
+    };

Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/intel,lgm-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LGM SoC PWM fan controller
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+properties:
+  compatible:
+    const: intel,lgm-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm: pwm@e0d00000 {
+        compatible = "intel,lgm-pwm";
+        reg = <0xe0d00000 0x30>;
+        #pwm-cells = <2>;
+        clocks = <&cgu0 126>;
+        resets = <&rcu0 0x30 21>;
+    };

Documentation/devicetree/bindings/pwm/pwm-mediatek.txt

@@ -7,6 +7,7 @@ Required properties:
    - "mediatek,mt7623-pwm": found on mt7623 SoC.
    - "mediatek,mt7628-pwm": found on mt7628 SoC.
    - "mediatek,mt7629-pwm": found on mt7629 SoC.
+   - "mediatek,mt8183-pwm": found on mt8183 SoC.
    - "mediatek,mt8516-pwm": found on mt8516 SoC.
  - reg: physical base address and length of the controller's registers.
  - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of

Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt

@@ -4,6 +4,7 @@ Required properties:
  - compatible: should be "mediatek,<name>-disp-pwm":
    - "mediatek,mt2701-disp-pwm": found on mt2701 SoC.
    - "mediatek,mt6595-disp-pwm": found on mt6595 SoC.
+   - "mediatek,mt8167-disp-pwm", "mediatek,mt8173-disp-pwm": found on mt8167 SoC.
    - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
  - reg: physical base address and length of the controller's registers.
  - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of

Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml

@@ -59,6 +59,7 @@ patternProperties:
         items:
           - enum:
               - atmel,tcb-timer
+              - atmel,tcb-pwm
               - microchip,tcb-capture
       reg:
         description:
@@ -68,10 +69,35 @@ patternProperties:
 
         minItems: 1
         maxItems: 3
+    required:
+      - compatible
+      - reg
+
+  "^pwm@[0-2]$":
+    description: The timer block channels that are used as PWMs.
+    $ref: ../../pwm/pwm.yaml#
+    type: object
+    properties:
+      compatible:
+        const: atmel,tcb-pwm
+      reg:
+        description:
+          TCB channel to use for this PWM.
+        enum: [ 0, 1, 2 ]
+
+      "#pwm-cells":
+        description:
+          The only third cell flag supported by this binding is
+          PWM_POLARITY_INVERTED.
+        const: 3
 
     required:
       - compatible
       - reg
+      - "#pwm-cells"
+
+    additionalProperties: false
+
 
 allOf:
   - if:
@@ -158,7 +184,13 @@ examples:
                         compatible = "atmel,tcb-timer";
                         reg = <1>;
                 };
-        };
+
+                pwm@2 {
+                        compatible = "atmel,tcb-pwm";
+                        reg = <2>;
+                        #pwm-cells = <3>;
+                };
+         };
     /* TCB0 Capture with QDEC: */
         timer@f800c000 {
                 compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";

drivers/pwm/Kconfig

@@ -53,8 +53,8 @@ config PWM_AB8500
 
 config PWM_ATMEL
 	tristate "Atmel PWM support"
-	depends on OF
 	depends on ARCH_AT91 || COMPILE_TEST
+	depends on HAS_IOMEM && OF
 	help
 	  Generic PWM framework driver for Atmel SoC.
 
@@ -75,7 +75,8 @@ config PWM_ATMEL_HLCDC_PWM
 
 config PWM_ATMEL_TCB
 	tristate "Atmel TC Block PWM support"
-	depends on ATMEL_TCLIB && OF
+	depends on OF
+	select REGMAP_MMIO
 	help
 	  Generic PWM framework driver for Atmel Timer Counter Block.
 
@@ -88,7 +89,7 @@ config PWM_ATMEL_TCB
 config PWM_BCM_IPROC
 	tristate "iProc PWM support"
 	depends on ARCH_BCM_IPROC || COMPILE_TEST
-	depends on COMMON_CLK
+	depends on COMMON_CLK && HAS_IOMEM
 	default ARCH_BCM_IPROC
 	help
 	  Generic PWM framework driver for Broadcom iProc PWM block. This
@@ -111,6 +112,7 @@ config PWM_BCM_KONA
 config PWM_BCM2835
 	tristate "BCM2835 PWM support"
 	depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  PWM framework driver for BCM2835 controller (Raspberry Pi)
 
@@ -120,6 +122,7 @@ config PWM_BCM2835
 config PWM_BERLIN
 	tristate "Marvell Berlin PWM support"
 	depends on ARCH_BERLIN || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  PWM framework driver for Marvell Berlin SoCs.
 
@@ -129,6 +132,7 @@ config PWM_BERLIN
 config PWM_BRCMSTB
 	tristate "Broadcom STB PWM support"
 	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for the Broadcom Set-top-Box
 	  SoCs (BCM7xxx).
@@ -160,9 +164,19 @@ config PWM_CROS_EC
 	  PWM driver for exposing a PWM attached to the ChromeOS Embedded
 	  Controller.
 
+config PWM_DWC
+	tristate "DesignWare PWM Controller"
+	depends on PCI
+	help
+	  PWM driver for Synopsys DWC PWM Controller attached to a PCI bus.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-dwc.
+
 config PWM_EP93XX
 	tristate "Cirrus Logic EP93xx PWM support"
 	depends on ARCH_EP93XX || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for Cirrus Logic EP93xx.
 
@@ -184,6 +198,7 @@ config PWM_FSL_FTM
 config PWM_HIBVT
 	tristate "HiSilicon BVT PWM support"
 	depends on ARCH_HISI || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for HiSilicon BVT SoCs.
 
@@ -206,6 +221,7 @@ config PWM_IMG
 config PWM_IMX1
 	tristate "i.MX1 PWM support"
 	depends on ARCH_MXC || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for i.MX1 and i.MX21
 
@@ -215,6 +231,7 @@ config PWM_IMX1
 config PWM_IMX27
 	tristate "i.MX27 PWM support"
 	depends on ARCH_MXC || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for i.MX27 and later i.MX SoCs.
 
@@ -232,6 +249,17 @@ config PWM_IMX_TPM
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-imx-tpm.
 
+config PWM_INTEL_LGM
+	tristate "Intel LGM PWM support"
+	depends on HAS_IOMEM
+	depends on (OF && X86) || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  Generic PWM fan controller driver for LGM SoC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-intel-lgm.
+
 config PWM_IQS620A
 	tristate "Azoteq IQS620A PWM support"
 	depends on MFD_IQS62X || COMPILE_TEST
@@ -254,6 +282,15 @@ config PWM_JZ4740
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-jz4740.
 
+config PWM_KEEMBAY
+	tristate "Intel Keem Bay PWM driver"
+	depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST)
+	help
+	  The platform driver for Intel Keem Bay PWM controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-keembay.
+
 config PWM_LP3943
 	tristate "TI/National Semiconductor LP3943 PWM support"
 	depends on MFD_LP3943
@@ -267,6 +304,7 @@ config PWM_LP3943
 config PWM_LPC18XX_SCT
 	tristate "LPC18xx/43xx PWM/SCT support"
 	depends on ARCH_LPC18XX || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for NXP LPC18xx PWM/SCT which
 	  supports 16 channels.
@@ -279,6 +317,7 @@ config PWM_LPC18XX_SCT
 config PWM_LPC32XX
 	tristate "LPC32XX PWM support"
 	depends on ARCH_LPC32XX || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two
 	  PWM controllers.
@@ -287,11 +326,13 @@ config PWM_LPC32XX
 	  will be called pwm-lpc32xx.
 
 config PWM_LPSS
+	depends on HAS_IOMEM
 	tristate
 
 config PWM_LPSS_PCI
 	tristate "Intel LPSS PWM PCI driver"
-	depends on X86 && PCI
+	depends on X86 || COMPILE_TEST
+	depends on HAS_IOMEM && PCI
 	select PWM_LPSS
 	help
 	  The PCI driver for Intel Low Power Subsystem PWM controller.
@@ -301,7 +342,8 @@ config PWM_LPSS_PCI
 
 config PWM_LPSS_PLATFORM
 	tristate "Intel LPSS PWM platform driver"
-	depends on X86 && ACPI
+	depends on (X86 && ACPI) || COMPILE_TEST
+	depends on HAS_IOMEM
 	select PWM_LPSS
 	help
 	  The platform driver for Intel Low Power Subsystem PWM controller.
@@ -312,7 +354,7 @@ config PWM_LPSS_PLATFORM
 config PWM_MESON
 	tristate "Amlogic Meson PWM driver"
 	depends on ARCH_MESON || COMPILE_TEST
-	depends on COMMON_CLK
+	depends on COMMON_CLK && HAS_IOMEM
 	help
 	  The platform driver for Amlogic Meson PWM controller.
 
@@ -333,6 +375,7 @@ config PWM_MTK_DISP
 config PWM_MEDIATEK
 	tristate "MediaTek PWM support"
 	depends on ARCH_MEDIATEK || RALINK || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for Mediatek ARM SoC.
 
@@ -341,8 +384,8 @@ config PWM_MEDIATEK
 
 config PWM_MXS
 	tristate "Freescale MXS PWM support"
-	depends on OF
 	depends on ARCH_MXS || COMPILE_TEST
+	depends on HAS_IOMEM && OF
 	select STMP_DEVICE
 	help
 	  Generic PWM framework driver for Freescale MXS.
@@ -373,6 +416,7 @@ config PWM_PCA9685
 config PWM_PXA
 	tristate "PXA PWM support"
 	depends on ARCH_PXA || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for PXA.
 
@@ -404,6 +448,7 @@ config PWM_RENESAS_TPU
 config PWM_ROCKCHIP
 	tristate "Rockchip PWM support"
 	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for the PWM controller found on
 	  Rockchip SoCs.
@@ -411,6 +456,7 @@ config PWM_ROCKCHIP
 config PWM_SAMSUNG
 	tristate "Samsung PWM support"
 	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for Samsung.
 
@@ -420,7 +466,7 @@ config PWM_SAMSUNG
 config PWM_SIFIVE
 	tristate "SiFive PWM support"
 	depends on OF
-	depends on COMMON_CLK
+	depends on COMMON_CLK && HAS_IOMEM
 	depends on RISCV || COMPILE_TEST
 	help
 	  Generic PWM framework driver for SiFive SoCs.
@@ -441,7 +487,7 @@ config PWM_SL28CPLD
 config PWM_SPEAR
 	tristate "STMicroelectronics SPEAr PWM support"
 	depends on PLAT_SPEAR || COMPILE_TEST
-	depends on OF
+	depends on HAS_IOMEM && OF
 	help
 	  Generic PWM framework driver for the PWM controller on ST
 	  SPEAr SoCs.
@@ -463,7 +509,7 @@ config PWM_SPRD
 config PWM_STI
 	tristate "STiH4xx PWM support"
 	depends on ARCH_STI || COMPILE_TEST
-	depends on OF
+	depends on HAS_IOMEM && OF
 	help
 	  Generic PWM framework driver for STiH4xx SoCs.
 
@@ -509,6 +555,7 @@ config PWM_SUN4I
 config PWM_TEGRA
 	tristate "NVIDIA Tegra PWM support"
 	depends on ARCH_TEGRA || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for the PWFM controller found on NVIDIA
 	  Tegra SoCs.
@@ -519,6 +566,7 @@ config PWM_TEGRA
 config PWM_TIECAP
 	tristate "ECAP PWM support"
 	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  PWM driver support for the ECAP APWM controller found on TI SOCs
 
@@ -528,6 +576,7 @@ config PWM_TIECAP
 config PWM_TIEHRPWM
 	tristate "EHRPWM PWM support"
 	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_K3 || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  PWM driver support for the EHRPWM controller found on TI SOCs
 
@@ -555,6 +604,7 @@ config PWM_TWL_LED
 config PWM_VT8500
 	tristate "vt8500 PWM support"
 	depends on ARCH_VT8500 || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for vt8500.
 
@@ -564,6 +614,7 @@ config PWM_VT8500
 config PWM_ZX
 	tristate "ZTE ZX PWM support"
 	depends on ARCH_ZX || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Generic PWM framework driver for ZTE ZX family SoCs.
 

drivers/pwm/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_PWM_BRCMSTB)	+= pwm-brcmstb.o
 obj-$(CONFIG_PWM_CLPS711X)	+= pwm-clps711x.o
 obj-$(CONFIG_PWM_CRC)		+= pwm-crc.o
 obj-$(CONFIG_PWM_CROS_EC)	+= pwm-cros-ec.o
+obj-$(CONFIG_PWM_DWC)		+= pwm-dwc.o
 obj-$(CONFIG_PWM_EP93XX)	+= pwm-ep93xx.o
 obj-$(CONFIG_PWM_FSL_FTM)	+= pwm-fsl-ftm.o
 obj-$(CONFIG_PWM_HIBVT)		+= pwm-hibvt.o
@@ -20,8 +21,10 @@ obj-$(CONFIG_PWM_IMG)		+= pwm-img.o
 obj-$(CONFIG_PWM_IMX1)		+= pwm-imx1.o
 obj-$(CONFIG_PWM_IMX27)		+= pwm-imx27.o
 obj-$(CONFIG_PWM_IMX_TPM)	+= pwm-imx-tpm.o
+obj-$(CONFIG_PWM_INTEL_LGM)	+= pwm-intel-lgm.o
 obj-$(CONFIG_PWM_IQS620A)	+= pwm-iqs620a.o
 obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
+obj-$(CONFIG_PWM_KEEMBAY)	+= pwm-keembay.o
 obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
 obj-$(CONFIG_PWM_LPC18XX_SCT)	+= pwm-lpc18xx-sct.o
 obj-$(CONFIG_PWM_LPC32XX)	+= pwm-lpc32xx.o

drivers/pwm/core.c

@@ -1338,7 +1338,7 @@ DEFINE_SEQ_ATTRIBUTE(pwm_debugfs);
 
 static int __init pwm_debugfs_init(void)
 {
-	debugfs_create_file("pwm", S_IFREG | S_IRUGO, NULL, NULL,
+	debugfs_create_file("pwm", S_IFREG | 0444, NULL, NULL,
 			    &pwm_debugfs_fops);
 
 	return 0;

drivers/pwm/pwm-ab8500.c

@@ -101,12 +101,12 @@ static int ab8500_pwm_probe(struct platform_device *pdev)
 
 	ab8500->chip.dev = &pdev->dev;
 	ab8500->chip.ops = &ab8500_pwm_ops;
-	ab8500->chip.base = pdev->id;
+	ab8500->chip.base = -1;
 	ab8500->chip.npwm = 1;
 
 	err = pwmchip_add(&ab8500->chip);
 	if (err < 0)
-		return err;
+		return dev_err_probe(&pdev->dev, err, "Failed to add pwm chip\n");
 
 	dev_dbg(&pdev->dev, "pwm probe successful\n");
 	platform_set_drvdata(pdev, ab8500);

drivers/pwm/pwm-atmel.c

@@ -401,7 +401,6 @@ MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids);
 static int atmel_pwm_probe(struct platform_device *pdev)
 {
 	struct atmel_pwm_chip *atmel_pwm;
-	struct resource *res;
 	int ret;
 
 	atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL);
@@ -412,8 +411,7 @@ static int atmel_pwm_probe(struct platform_device *pdev)
 	atmel_pwm->data = of_device_get_match_data(&pdev->dev);
 	atmel_pwm->updated_pwms = 0;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	atmel_pwm->base = devm_ioremap_resource(&pdev->dev, res);
+	atmel_pwm->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(atmel_pwm->base))
 		return PTR_ERR(atmel_pwm->base);
 

drivers/pwm/pwm-bcm-iproc.c

@@ -197,7 +197,6 @@ static const struct pwm_ops iproc_pwm_ops = {
 static int iproc_pwmc_probe(struct platform_device *pdev)
 {
 	struct iproc_pwmc *ip;
-	struct resource *res;
 	unsigned int i;
 	u32 value;
 	int ret;
@@ -215,8 +214,7 @@ static int iproc_pwmc_probe(struct platform_device *pdev)
 	ip->chip.of_xlate = of_pwm_xlate_with_flags;
 	ip->chip.of_pwm_n_cells = 3;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ip->base = devm_ioremap_resource(&pdev->dev, res);
+	ip->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(ip->base))
 		return PTR_ERR(ip->base);
 

drivers/pwm/pwm-bcm-kona.c

@@ -259,7 +259,6 @@ static const struct pwm_ops kona_pwm_ops = {
 static int kona_pwmc_probe(struct platform_device *pdev)
 {
 	struct kona_pwmc *kp;
-	struct resource *res;
 	unsigned int chan;
 	unsigned int value = 0;
 	int ret = 0;
@@ -277,8 +276,7 @@ static int kona_pwmc_probe(struct platform_device *pdev)
 	kp->chip.of_xlate = of_pwm_xlate_with_flags;
 	kp->chip.of_pwm_n_cells = 3;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	kp->base = devm_ioremap_resource(&pdev->dev, res);
+	kp->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(kp->base))
 		return PTR_ERR(kp->base);
 

drivers/pwm/pwm-bcm2835.c

@@ -58,13 +58,15 @@ static void bcm2835_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 	writel(value, pc->base + PWM_CONTROL);
 }
 
-static int bcm2835_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-			      int duty_ns, int period_ns)
+static int bcm2835_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
 {
+
 	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
 	unsigned long rate = clk_get_rate(pc->clk);
+	unsigned long long period;
 	unsigned long scaler;
-	u32 period;
+	u32 val;
 
 	if (!rate) {
 		dev_err(pc->dev, "failed to get clock rate\n");
@@ -72,54 +74,34 @@ static int bcm2835_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	}
 
 	scaler = DIV_ROUND_CLOSEST(NSEC_PER_SEC, rate);
-	period = DIV_ROUND_CLOSEST(period_ns, scaler);
+	/* set period */
+	period = DIV_ROUND_CLOSEST_ULL(state->period, scaler);
 
-	if (period < PERIOD_MIN)
+	/* dont accept a period that is too small or has been truncated */
+	if ((period < PERIOD_MIN) || (period > U32_MAX))
 		return -EINVAL;
 
-	writel(DIV_ROUND_CLOSEST(duty_ns, scaler),
-	       pc->base + DUTY(pwm->hwpwm));
 	writel(period, pc->base + PERIOD(pwm->hwpwm));
 
-	return 0;
-}
-
-static int bcm2835_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
-	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
-	u32 value;
-
-	value = readl(pc->base + PWM_CONTROL);
-	value |= PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm);
-	writel(value, pc->base + PWM_CONTROL);
+	/* set duty cycle */
+	val = DIV_ROUND_CLOSEST_ULL(state->duty_cycle, scaler);
+	writel(val, pc->base + DUTY(pwm->hwpwm));
 
-	return 0;
-}
+	/* set polarity */
+	val = readl(pc->base + PWM_CONTROL);
 
-static void bcm2835_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
-	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
-	u32 value;
-
-	value = readl(pc->base + PWM_CONTROL);
-	value &= ~(PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm));
-	writel(value, pc->base + PWM_CONTROL);
-}
-
-static int bcm2835_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
-				enum pwm_polarity polarity)
-{
-	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
-	u32 value;
-
-	value = readl(pc->base + PWM_CONTROL);
+	if (state->polarity == PWM_POLARITY_NORMAL)
+		val &= ~(PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm));
+	else
+		val |= PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm);
 
-	if (polarity == PWM_POLARITY_NORMAL)
-		value &= ~(PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm));
+	/* enable/disable */
+	if (state->enabled)
+		val |= PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm);
 	else
-		value |= PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm);
+		val &= ~(PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm));
 
-	writel(value, pc->base + PWM_CONTROL);
+	writel(val, pc->base + PWM_CONTROL);
 
 	return 0;
 }
@@ -127,17 +109,13 @@ static int bcm2835_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
 static const struct pwm_ops bcm2835_pwm_ops = {
 	.request = bcm2835_pwm_request,
 	.free = bcm2835_pwm_free,
-	.config = bcm2835_pwm_config,
-	.enable = bcm2835_pwm_enable,
-	.disable = bcm2835_pwm_disable,
-	.set_polarity = bcm2835_set_polarity,
+	.apply = bcm2835_pwm_apply,
 	.owner = THIS_MODULE,
 };
 
 static int bcm2835_pwm_probe(struct platform_device *pdev)
 {
 	struct bcm2835_pwm *pc;
-	struct resource *res;
 	int ret;
 
 	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
@@ -146,8 +124,7 @@ static int bcm2835_pwm_probe(struct platform_device *pdev)
 
 	pc->dev = &pdev->dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pc->base = devm_ioremap_resource(&pdev->dev, res);
+	pc->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pc->base))
 		return PTR_ERR(pc->base);
 

drivers/pwm/pwm-berlin.c

@@ -186,15 +186,13 @@ MODULE_DEVICE_TABLE(of, berlin_pwm_match);
 static int berlin_pwm_probe(struct platform_device *pdev)
 {
 	struct berlin_pwm_chip *pwm;
-	struct resource *res;
 	int ret;
 
 	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
 	if (!pwm)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pwm->base = devm_ioremap_resource(&pdev->dev, res);
+	pwm->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pwm->base))
 		return PTR_ERR(pwm->base);
 

drivers/pwm/pwm-brcmstb.c

@@ -234,7 +234,6 @@ MODULE_DEVICE_TABLE(of, brcmstb_pwm_of_match);
 static int brcmstb_pwm_probe(struct platform_device *pdev)
 {
 	struct brcmstb_pwm *p;
-	struct resource *res;
 	int ret;
 
 	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
@@ -262,8 +261,7 @@ static int brcmstb_pwm_probe(struct platform_device *pdev)
 	p->chip.base = -1;
 	p->chip.npwm = 2;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	p->base = devm_ioremap_resource(&pdev->dev, res);
+	p->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(p->base)) {
 		ret = PTR_ERR(p->base);
 		goto out_clk;

drivers/pwm/pwm-clps711x.c

@@ -113,14 +113,12 @@ static struct pwm_device *clps711x_pwm_xlate(struct pwm_chip *chip,
 static int clps711x_pwm_probe(struct platform_device *pdev)
 {
 	struct clps711x_chip *priv;
-	struct resource *res;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->pmpcon = devm_ioremap_resource(&pdev->dev, res);
+	priv->pmpcon = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->pmpcon))
 		return PTR_ERR(priv->pmpcon);
 

drivers/pwm/pwm-crc.c

@@ -64,7 +64,7 @@ static int crc_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	}
 
 	if (state->polarity != PWM_POLARITY_NORMAL)
-		return -EOPNOTSUPP;
+		return -EINVAL;
 
 	if (pwm_is_enabled(pwm) && !state->enabled) {
 		err = regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0);

drivers/pwm/pwm-dwc.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DesignWare PWM Controller driver
+ *
+ * Copyright (C) 2018-2020 Intel Corporation
+ *
+ * Author: Felipe Balbi (Intel)
+ * Author: Jarkko Nikula <jarkko.nikula@linux.intel.com>
+ * Author: Raymond Tan <raymond.tan@intel.com>
+ *
+ * Limitations:
+ * - The hardware cannot generate a 0 % or 100 % duty cycle. Both high and low
+ *   periods are one or more input clock periods long.
+ */
+
+#include <linux/bitops.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+
+#define DWC_TIM_LD_CNT(n)	((n) * 0x14)
+#define DWC_TIM_LD_CNT2(n)	(((n) * 4) + 0xb0)
+#define DWC_TIM_CUR_VAL(n)	(((n) * 0x14) + 0x04)
+#define DWC_TIM_CTRL(n)		(((n) * 0x14) + 0x08)
+#define DWC_TIM_EOI(n)		(((n) * 0x14) + 0x0c)
+#define DWC_TIM_INT_STS(n)	(((n) * 0x14) + 0x10)
+
+#define DWC_TIMERS_INT_STS	0xa0
+#define DWC_TIMERS_EOI		0xa4
+#define DWC_TIMERS_RAW_INT_STS	0xa8
+#define DWC_TIMERS_COMP_VERSION	0xac
+
+#define DWC_TIMERS_TOTAL	8
+#define DWC_CLK_PERIOD_NS	10
+
+/* Timer Control Register */
+#define DWC_TIM_CTRL_EN		BIT(0)
+#define DWC_TIM_CTRL_MODE	BIT(1)
+#define DWC_TIM_CTRL_MODE_FREE	(0 << 1)
+#define DWC_TIM_CTRL_MODE_USER	(1 << 1)
+#define DWC_TIM_CTRL_INT_MASK	BIT(2)
+#define DWC_TIM_CTRL_PWM	BIT(3)
+
+struct dwc_pwm_ctx {
+	u32 cnt;
+	u32 cnt2;
+	u32 ctrl;
+};
+
+struct dwc_pwm {
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct dwc_pwm_ctx ctx[DWC_TIMERS_TOTAL];
+};
+#define to_dwc_pwm(p)	(container_of((p), struct dwc_pwm, chip))
+
+static inline u32 dwc_pwm_readl(struct dwc_pwm *dwc, u32 offset)
+{
+	return readl(dwc->base + offset);
+}
+
+static inline void dwc_pwm_writel(struct dwc_pwm *dwc, u32 value, u32 offset)
+{
+	writel(value, dwc->base + offset);
+}
+
+static void __dwc_pwm_set_enable(struct dwc_pwm *dwc, int pwm, int enabled)
+{
+	u32 reg;
+
+	reg = dwc_pwm_readl(dwc, DWC_TIM_CTRL(pwm));
+
+	if (enabled)
+		reg |= DWC_TIM_CTRL_EN;
+	else
+		reg &= ~DWC_TIM_CTRL_EN;
+
+	dwc_pwm_writel(dwc, reg, DWC_TIM_CTRL(pwm));
+}
+
+static int __dwc_pwm_configure_timer(struct dwc_pwm *dwc,
+				     struct pwm_device *pwm,
+				     const struct pwm_state *state)
+{
+	u64 tmp;
+	u32 ctrl;
+	u32 high;
+	u32 low;
+
+	/*
+	 * Calculate width of low and high period in terms of input clock
+	 * periods and check are the result within HW limits between 1 and
+	 * 2^32 periods.
+	 */
+	tmp = DIV_ROUND_CLOSEST_ULL(state->duty_cycle, DWC_CLK_PERIOD_NS);
+	if (tmp < 1 || tmp > (1ULL << 32))
+		return -ERANGE;
+	low = tmp - 1;
+
+	tmp = DIV_ROUND_CLOSEST_ULL(state->period - state->duty_cycle,
+				    DWC_CLK_PERIOD_NS);
+	if (tmp < 1 || tmp > (1ULL << 32))
+		return -ERANGE;
+	high = tmp - 1;
+
+	/*
+	 * Specification says timer usage flow is to disable timer, then
+	 * program it followed by enable. It also says Load Count is loaded
+	 * into timer after it is enabled - either after a disable or
+	 * a reset. Based on measurements it happens also without disable
+	 * whenever Load Count is updated. But follow the specification.
+	 */
+	__dwc_pwm_set_enable(dwc, pwm->hwpwm, false);
+
+	/*
+	 * Write Load Count and Load Count 2 registers. Former defines the
+	 * width of low period and latter the width of high period in terms
+	 * multiple of input clock periods:
+	 * Width = ((Count + 1) * input clock period).
+	 */
+	dwc_pwm_writel(dwc, low, DWC_TIM_LD_CNT(pwm->hwpwm));
+	dwc_pwm_writel(dwc, high, DWC_TIM_LD_CNT2(pwm->hwpwm));
+
+	/*
+	 * Set user-defined mode, timer reloads from Load Count registers
+	 * when it counts down to 0.
+	 * Set PWM mode, it makes output to toggle and width of low and high
+	 * periods are set by Load Count registers.
+	 */
+	ctrl = DWC_TIM_CTRL_MODE_USER | DWC_TIM_CTRL_PWM;
+	dwc_pwm_writel(dwc, ctrl, DWC_TIM_CTRL(pwm->hwpwm));
+
+	/*
+	 * Enable timer. Output starts from low period.
+	 */
+	__dwc_pwm_set_enable(dwc, pwm->hwpwm, state->enabled);
+
+	return 0;
+}
+
+static int dwc_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	struct dwc_pwm *dwc = to_dwc_pwm(chip);
+
+	if (state->polarity != PWM_POLARITY_INVERSED)
+		return -EINVAL;
+
+	if (state->enabled) {
+		if (!pwm->state.enabled)
+			pm_runtime_get_sync(chip->dev);
+		return __dwc_pwm_configure_timer(dwc, pwm, state);
+	} else {
+		if (pwm->state.enabled) {
+			__dwc_pwm_set_enable(dwc, pwm->hwpwm, false);
+			pm_runtime_put_sync(chip->dev);
+		}
+	}
+
+	return 0;
+}
+
+static void dwc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			      struct pwm_state *state)
+{
+	struct dwc_pwm *dwc = to_dwc_pwm(chip);
+	u64 duty, period;
+
+	pm_runtime_get_sync(chip->dev);
+
+	state->enabled = !!(dwc_pwm_readl(dwc,
+				DWC_TIM_CTRL(pwm->hwpwm)) & DWC_TIM_CTRL_EN);
+
+	duty = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT(pwm->hwpwm));
+	duty += 1;
+	duty *= DWC_CLK_PERIOD_NS;
+	state->duty_cycle = duty;
+
+	period = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT2(pwm->hwpwm));
+	period += 1;
+	period *= DWC_CLK_PERIOD_NS;
+	period += duty;
+	state->period = period;
+
+	state->polarity = PWM_POLARITY_INVERSED;
+
+	pm_runtime_put_sync(chip->dev);
+}
+
+static const struct pwm_ops dwc_pwm_ops = {
+	.apply = dwc_pwm_apply,
+	.get_state = dwc_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static int dwc_pwm_probe(struct pci_dev *pci, const struct pci_device_id *id)
+{
+	struct device *dev = &pci->dev;
+	struct dwc_pwm *dwc;
+	int ret;
+
+	dwc = devm_kzalloc(&pci->dev, sizeof(*dwc), GFP_KERNEL);
+	if (!dwc)
+		return -ENOMEM;
+
+	ret = pcim_enable_device(pci);
+	if (ret) {
+		dev_err(&pci->dev,
+			"Failed to enable device (%pe)\n", ERR_PTR(ret));
+		return ret;
+	}
+
+	pci_set_master(pci);
+
+	ret = pcim_iomap_regions(pci, BIT(0), pci_name(pci));
+	if (ret) {
+		dev_err(&pci->dev,
+			"Failed to iomap PCI BAR (%pe)\n", ERR_PTR(ret));
+		return ret;
+	}
+
+	dwc->base = pcim_iomap_table(pci)[0];
+	if (!dwc->base) {
+		dev_err(&pci->dev, "Base address missing\n");
+		return -ENOMEM;
+	}
+
+	pci_set_drvdata(pci, dwc);
+
+	dwc->chip.dev = dev;
+	dwc->chip.ops = &dwc_pwm_ops;
+	dwc->chip.npwm = DWC_TIMERS_TOTAL;
+	dwc->chip.base = -1;
+
+	ret = pwmchip_add(&dwc->chip);
+	if (ret)
+		return ret;
+
+	pm_runtime_put(dev);
+	pm_runtime_allow(dev);
+
+	return 0;
+}
+
+static void dwc_pwm_remove(struct pci_dev *pci)
+{
+	struct dwc_pwm *dwc = pci_get_drvdata(pci);
+
+	pm_runtime_forbid(&pci->dev);
+	pm_runtime_get_noresume(&pci->dev);
+
+	pwmchip_remove(&dwc->chip);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dwc_pwm_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+	struct dwc_pwm *dwc = pci_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < DWC_TIMERS_TOTAL; i++) {
+		if (dwc->chip.pwms[i].state.enabled) {
+			dev_err(dev, "PWM %u in use by consumer (%s)\n",
+				i, dwc->chip.pwms[i].label);
+			return -EBUSY;
+		}
+		dwc->ctx[i].cnt = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT(i));
+		dwc->ctx[i].cnt2 = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT2(i));
+		dwc->ctx[i].ctrl = dwc_pwm_readl(dwc, DWC_TIM_CTRL(i));
+	}
+
+	return 0;
+}
+
+static int dwc_pwm_resume(struct device *dev)
+{
+	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+	struct dwc_pwm *dwc = pci_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < DWC_TIMERS_TOTAL; i++) {
+		dwc_pwm_writel(dwc, dwc->ctx[i].cnt, DWC_TIM_LD_CNT(i));
+		dwc_pwm_writel(dwc, dwc->ctx[i].cnt2, DWC_TIM_LD_CNT2(i));
+		dwc_pwm_writel(dwc, dwc->ctx[i].ctrl, DWC_TIM_CTRL(i));
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dwc_pwm_pm_ops, dwc_pwm_suspend, dwc_pwm_resume);
+
+static const struct pci_device_id dwc_pwm_id_table[] = {
+	{ PCI_VDEVICE(INTEL, 0x4bb7) }, /* Elkhart Lake */
+	{  }	/* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(pci, dwc_pwm_id_table);
+
+static struct pci_driver dwc_pwm_driver = {
+	.name = "pwm-dwc",
+	.probe = dwc_pwm_probe,
+	.remove = dwc_pwm_remove,
+	.id_table = dwc_pwm_id_table,
+	.driver = {
+		.pm = &dwc_pwm_pm_ops,
+	},
+};
+
+module_pci_driver(dwc_pwm_driver);
+
+MODULE_AUTHOR("Felipe Balbi (Intel)");
+MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@linux.intel.com>");
+MODULE_AUTHOR("Raymond Tan <raymond.tan@intel.com>");
+MODULE_DESCRIPTION("DesignWare PWM Controller");
+MODULE_LICENSE("GPL");

drivers/pwm/pwm-ep93xx.c

@@ -169,15 +169,13 @@ static const struct pwm_ops ep93xx_pwm_ops = {
 static int ep93xx_pwm_probe(struct platform_device *pdev)
 {
 	struct ep93xx_pwm *ep93xx_pwm;
-	struct resource *res;
 	int ret;
 
 	ep93xx_pwm = devm_kzalloc(&pdev->dev, sizeof(*ep93xx_pwm), GFP_KERNEL);
 	if (!ep93xx_pwm)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ep93xx_pwm->base = devm_ioremap_resource(&pdev->dev, res);
+	ep93xx_pwm->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(ep93xx_pwm->base))
 		return PTR_ERR(ep93xx_pwm->base);
 

drivers/pwm/pwm-fsl-ftm.c

@@ -399,7 +399,6 @@ static const struct regmap_config fsl_pwm_regmap_config = {
 static int fsl_pwm_probe(struct platform_device *pdev)
 {
 	struct fsl_pwm_chip *fpc;
-	struct resource *res;
 	void __iomem *base;
 	int ret;
 
@@ -412,8 +411,7 @@ static int fsl_pwm_probe(struct platform_device *pdev)
 	fpc->soc = of_device_get_match_data(&pdev->dev);
 	fpc->chip.dev = &pdev->dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 

drivers/pwm/pwm-hibvt.c

@@ -190,9 +190,7 @@ static int hibvt_pwm_probe(struct platform_device *pdev)
 	const struct hibvt_pwm_soc *soc =
 				of_device_get_match_data(&pdev->dev);
 	struct hibvt_pwm_chip *pwm_chip;
-	struct resource *res;
-	int ret;
-	int i;
+	int ret, i;
 
 	pwm_chip = devm_kzalloc(&pdev->dev, sizeof(*pwm_chip), GFP_KERNEL);
 	if (pwm_chip == NULL)
@@ -213,8 +211,7 @@ static int hibvt_pwm_probe(struct platform_device *pdev)
 	pwm_chip->chip.of_pwm_n_cells = 3;
 	pwm_chip->soc = soc;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pwm_chip->base = devm_ioremap_resource(&pdev->dev, res);
+	pwm_chip->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pwm_chip->base))
 		return PTR_ERR(pwm_chip->base);
 

drivers/pwm/pwm-img.c

@@ -240,7 +240,6 @@ static int img_pwm_probe(struct platform_device *pdev)
 	int ret;
 	u64 val;
 	unsigned long clk_rate;
-	struct resource *res;
 	struct img_pwm_chip *pwm;
 	const struct of_device_id *of_dev_id;
 
@@ -250,8 +249,7 @@ static int img_pwm_probe(struct platform_device *pdev)
 
 	pwm->dev = &pdev->dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pwm->base = devm_ioremap_resource(&pdev->dev, res);
+	pwm->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pwm->base))
 		return PTR_ERR(pwm->base);
 

drivers/pwm/pwm-imx-tpm.c

@@ -350,13 +350,9 @@ static int pwm_imx_tpm_probe(struct platform_device *pdev)
 		return PTR_ERR(tpm->base);
 
 	tpm->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(tpm->clk)) {
-		ret = PTR_ERR(tpm->clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"failed to get PWM clock: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(tpm->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(tpm->clk),
+				     "failed to get PWM clock\n");
 
 	ret = clk_prepare_enable(tpm->clk);
 	if (ret) {

drivers/pwm/pwm-imx1.c

@@ -136,7 +136,6 @@ MODULE_DEVICE_TABLE(of, pwm_imx1_dt_ids);
 static int pwm_imx1_probe(struct platform_device *pdev)
 {
 	struct pwm_imx1_chip *imx;
-	struct resource *r;
 
 	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
 	if (!imx)
@@ -145,31 +144,21 @@ static int pwm_imx1_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, imx);
 
 	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
-	if (IS_ERR(imx->clk_ipg)) {
-		dev_err(&pdev->dev, "getting ipg clock failed with %ld\n",
-				PTR_ERR(imx->clk_ipg));
-		return PTR_ERR(imx->clk_ipg);
-	}
+	if (IS_ERR(imx->clk_ipg))
+		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg),
+				     "getting ipg clock failed\n");
 
 	imx->clk_per = devm_clk_get(&pdev->dev, "per");
-	if (IS_ERR(imx->clk_per)) {
-		int ret = PTR_ERR(imx->clk_per);
-
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"failed to get peripheral clock: %d\n",
-				ret);
-
-		return ret;
-	}
+	if (IS_ERR(imx->clk_per))
+		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_per),
+				     "failed to get peripheral clock\n");
 
 	imx->chip.ops = &pwm_imx1_ops;
 	imx->chip.dev = &pdev->dev;
 	imx->chip.base = -1;
 	imx->chip.npwm = 1;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	imx->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	imx->mmio_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(imx->mmio_base))
 		return PTR_ERR(imx->mmio_base);
 

drivers/pwm/pwm-imx27.c

@@ -235,8 +235,9 @@ static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	period_cycles /= prescale;
 	c = clkrate * state->duty_cycle;
-	do_div(c, NSEC_PER_SEC * prescale);
+	do_div(c, NSEC_PER_SEC);
 	duty_cycles = c;
+	duty_cycles /= prescale;
 
 	/*
 	 * according to imx pwm RM, the real period value should be PERIOD
@@ -315,27 +316,14 @@ static int pwm_imx27_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, imx);
 
 	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
-	if (IS_ERR(imx->clk_ipg)) {
-		int ret = PTR_ERR(imx->clk_ipg);
-
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"getting ipg clock failed with %d\n",
-				ret);
-		return ret;
-	}
+	if (IS_ERR(imx->clk_ipg))
+		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg),
+				     "getting ipg clock failed\n");
 
 	imx->clk_per = devm_clk_get(&pdev->dev, "per");
-	if (IS_ERR(imx->clk_per)) {
-		int ret = PTR_ERR(imx->clk_per);
-
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"failed to get peripheral clock: %d\n",
-				ret);
-
-		return ret;
-	}
+	if (IS_ERR(imx->clk_per))
+		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_per),
+				     "failed to get peripheral clock\n");
 
 	imx->chip.ops = &pwm_imx27_ops;
 	imx->chip.dev = &pdev->dev;

drivers/pwm/pwm-intel-lgm.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Intel Corporation.
+ *
+ * Limitations:
+ * - The hardware supports fixed period & configures only 2-wire mode.
+ * - Supports normal polarity. Does not support changing polarity.
+ * - When PWM is disabled, output of PWM will become 0(inactive). It doesn't
+ *   keep track of running period.
+ * - When duty cycle is changed, PWM output may be a mix of previous setting
+ *   and new setting for the first period. From second period, the output is
+ *   based on new setting.
+ * - It is a dedicated PWM fan controller. There are no other consumers for
+ *   this PWM controller.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#define LGM_PWM_FAN_CON0		0x0
+#define LGM_PWM_FAN_EN_EN		BIT(0)
+#define LGM_PWM_FAN_EN_DIS		0x0
+#define LGM_PWM_FAN_EN_MSK		BIT(0)
+#define LGM_PWM_FAN_MODE_2WIRE		0x0
+#define LGM_PWM_FAN_MODE_MSK		BIT(1)
+#define LGM_PWM_FAN_DC_MSK		GENMASK(23, 16)
+
+#define LGM_PWM_FAN_CON1		0x4
+#define LGM_PWM_FAN_MAX_RPM_MSK		GENMASK(15, 0)
+
+#define LGM_PWM_MAX_RPM			(BIT(16) - 1)
+#define LGM_PWM_DEFAULT_RPM		4000
+#define LGM_PWM_MAX_DUTY_CYCLE		(BIT(8) - 1)
+
+#define LGM_PWM_DC_BITS			8
+
+#define LGM_PWM_PERIOD_2WIRE_NS		(40 * NSEC_PER_MSEC)
+
+struct lgm_pwm_chip {
+	struct pwm_chip chip;
+	struct regmap *regmap;
+	u32 period;
+};
+
+static inline struct lgm_pwm_chip *to_lgm_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct lgm_pwm_chip, chip);
+}
+
+static int lgm_pwm_enable(struct pwm_chip *chip, bool enable)
+{
+	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+	struct regmap *regmap = pc->regmap;
+
+	return regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_EN_MSK,
+				  enable ? LGM_PWM_FAN_EN_EN : LGM_PWM_FAN_EN_DIS);
+}
+
+static int lgm_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+	u32 duty_cycle, val;
+	int ret;
+
+	/* The hardware only supports normal polarity and fixed period. */
+	if (state->polarity != PWM_POLARITY_NORMAL || state->period < pc->period)
+		return -EINVAL;
+
+	if (!state->enabled)
+		return lgm_pwm_enable(chip, 0);
+
+	duty_cycle = min_t(u64, state->duty_cycle, pc->period);
+	val = duty_cycle * LGM_PWM_MAX_DUTY_CYCLE / pc->period;
+
+	ret = regmap_update_bits(pc->regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_DC_MSK,
+				 FIELD_PREP(LGM_PWM_FAN_DC_MSK, val));
+	if (ret)
+		return ret;
+
+	return lgm_pwm_enable(chip, 1);
+}
+
+static void lgm_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			      struct pwm_state *state)
+{
+	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+	u32 duty, val;
+
+	state->enabled = regmap_test_bits(pc->regmap, LGM_PWM_FAN_CON0,
+					  LGM_PWM_FAN_EN_EN);
+	state->polarity = PWM_POLARITY_NORMAL;
+	state->period = pc->period; /* fixed period */
+
+	regmap_read(pc->regmap, LGM_PWM_FAN_CON0, &val);
+	duty = FIELD_GET(LGM_PWM_FAN_DC_MSK, val);
+	state->duty_cycle = DIV_ROUND_UP(duty * pc->period, LGM_PWM_MAX_DUTY_CYCLE);
+}
+
+static const struct pwm_ops lgm_pwm_ops = {
+	.get_state = lgm_pwm_get_state,
+	.apply = lgm_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static void lgm_pwm_init(struct lgm_pwm_chip *pc)
+{
+	struct regmap *regmap = pc->regmap;
+	u32 con0_val;
+
+	con0_val = FIELD_PREP(LGM_PWM_FAN_MODE_MSK, LGM_PWM_FAN_MODE_2WIRE);
+	pc->period = LGM_PWM_PERIOD_2WIRE_NS;
+	regmap_update_bits(regmap, LGM_PWM_FAN_CON1, LGM_PWM_FAN_MAX_RPM_MSK,
+			   LGM_PWM_DEFAULT_RPM);
+	regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_MODE_MSK,
+			   con0_val);
+}
+
+static const struct regmap_config lgm_pwm_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+};
+
+static void lgm_clk_release(void *data)
+{
+	struct clk *clk = data;
+
+	clk_disable_unprepare(clk);
+}
+
+static int lgm_clk_enable(struct device *dev, struct clk *clk)
+{
+	int ret;
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, lgm_clk_release, clk);
+}
+
+static void lgm_reset_control_release(void *data)
+{
+	struct reset_control *rst = data;
+
+	reset_control_assert(rst);
+}
+
+static int lgm_reset_control_deassert(struct device *dev, struct reset_control *rst)
+{
+	int ret;
+
+	ret = reset_control_deassert(rst);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, lgm_reset_control_release, rst);
+}
+
+static int lgm_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct reset_control *rst;
+	struct lgm_pwm_chip *pc;
+	void __iomem *io_base;
+	struct clk *clk;
+	int ret;
+
+	pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pc);
+
+	io_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(io_base))
+		return PTR_ERR(io_base);
+
+	pc->regmap = devm_regmap_init_mmio(dev, io_base, &lgm_pwm_regmap_config);
+	if (IS_ERR(pc->regmap))
+		return dev_err_probe(dev, PTR_ERR(pc->regmap),
+				     "failed to init register map\n");
+
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk))
+		return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n");
+
+	ret = lgm_clk_enable(dev, clk);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to enable clock\n");
+
+	rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(rst))
+		return dev_err_probe(dev, PTR_ERR(rst),
+				     "failed to get reset control\n");
+
+	ret = lgm_reset_control_deassert(dev, rst);
+	if (ret)
+		return dev_err_probe(dev, ret, "cannot deassert reset control\n");
+
+	pc->chip.dev = dev;
+	pc->chip.ops = &lgm_pwm_ops;
+	pc->chip.npwm = 1;
+	pc->chip.base = -1;
+
+	lgm_pwm_init(pc);
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "failed to add PWM chip\n");
+
+	return 0;
+}
+
+static int lgm_pwm_remove(struct platform_device *pdev)
+{
+	struct lgm_pwm_chip *pc = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&pc->chip);
+}
+
+static const struct of_device_id lgm_pwm_of_match[] = {
+	{ .compatible = "intel,lgm-pwm" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lgm_pwm_of_match);
+
+static struct platform_driver lgm_pwm_driver = {
+	.driver = {
+		.name = "intel-pwm",
+		.of_match_table = lgm_pwm_of_match,
+	},
+	.probe = lgm_pwm_probe,
+	.remove = lgm_pwm_remove,
+};
+module_platform_driver(lgm_pwm_driver);
+
+MODULE_LICENSE("GPL v2");

drivers/pwm/pwm-iqs620a.c

@@ -50,7 +50,7 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	int ret;
 
 	if (state->polarity != PWM_POLARITY_NORMAL)
-		return -ENOTSUPP;
+		return -EINVAL;
 
 	if (state->period < IQS620_PWM_PERIOD_NS)
 		return -EINVAL;

drivers/pwm/pwm-keembay.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Keem Bay PWM driver
+ *
+ * Copyright (C) 2020 Intel Corporation
+ * Authors: Lai Poey Seng <poey.seng.lai@intel.com>
+ *          Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
+ *
+ * Limitations:
+ * - Upon disabling a channel, the currently running
+ *   period will not be completed. However, upon
+ *   reconfiguration of the duty cycle/period, the
+ *   currently running period will be completed first.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+#define KMB_TOTAL_PWM_CHANNELS		6
+#define KMB_PWM_COUNT_MAX		U16_MAX
+#define KMB_PWM_EN_BIT			BIT(31)
+
+/* Mask */
+#define KMB_PWM_HIGH_MASK		GENMASK(31, 16)
+#define KMB_PWM_LOW_MASK		GENMASK(15, 0)
+#define KMB_PWM_LEADIN_MASK		GENMASK(30, 0)
+
+/* PWM Register offset */
+#define KMB_PWM_LEADIN_OFFSET(ch)	(0x00 + 4 * (ch))
+#define KMB_PWM_HIGHLOW_OFFSET(ch)	(0x20 + 4 * (ch))
+
+struct keembay_pwm {
+	struct pwm_chip chip;
+	struct device *dev;
+	struct clk *clk;
+	void __iomem *base;
+};
+
+static inline struct keembay_pwm *to_keembay_pwm_dev(struct pwm_chip *chip)
+{
+	return container_of(chip, struct keembay_pwm, chip);
+}
+
+static void keembay_clk_unprepare(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
+static int keembay_clk_enable(struct device *dev, struct clk *clk)
+{
+	int ret;
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, keembay_clk_unprepare, clk);
+}
+
+/*
+ * With gcc 10, CONFIG_CC_OPTIMIZE_FOR_SIZE and only "inline" instead of
+ * "__always_inline" this fails to compile because the compiler doesn't notice
+ * for all valid masks (e.g. KMB_PWM_LEADIN_MASK) that they are ok.
+ */
+static __always_inline void keembay_pwm_update_bits(struct keembay_pwm *priv, u32 mask,
+					   u32 val, u32 offset)
+{
+	u32 buff = readl(priv->base + offset);
+
+	buff = u32_replace_bits(buff, val, mask);
+	writel(buff, priv->base + offset);
+}
+
+static void keembay_pwm_enable(struct keembay_pwm *priv, int ch)
+{
+	keembay_pwm_update_bits(priv, KMB_PWM_EN_BIT, 1,
+				KMB_PWM_LEADIN_OFFSET(ch));
+}
+
+static void keembay_pwm_disable(struct keembay_pwm *priv, int ch)
+{
+	keembay_pwm_update_bits(priv, KMB_PWM_EN_BIT, 0,
+				KMB_PWM_LEADIN_OFFSET(ch));
+}
+
+static void keembay_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				  struct pwm_state *state)
+{
+	struct keembay_pwm *priv = to_keembay_pwm_dev(chip);
+	unsigned long long high, low;
+	unsigned long clk_rate;
+	u32 highlow;
+
+	clk_rate = clk_get_rate(priv->clk);
+
+	/* Read channel enabled status */
+	highlow = readl(priv->base + KMB_PWM_LEADIN_OFFSET(pwm->hwpwm));
+	if (highlow & KMB_PWM_EN_BIT)
+		state->enabled = true;
+	else
+		state->enabled = false;
+
+	/* Read period and duty cycle */
+	highlow = readl(priv->base + KMB_PWM_HIGHLOW_OFFSET(pwm->hwpwm));
+	low = FIELD_GET(KMB_PWM_LOW_MASK, highlow) * NSEC_PER_SEC;
+	high = FIELD_GET(KMB_PWM_HIGH_MASK, highlow) * NSEC_PER_SEC;
+	state->duty_cycle = DIV_ROUND_UP_ULL(high, clk_rate);
+	state->period = DIV_ROUND_UP_ULL(high + low, clk_rate);
+	state->polarity = PWM_POLARITY_NORMAL;
+}
+
+static int keembay_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	struct keembay_pwm *priv = to_keembay_pwm_dev(chip);
+	struct pwm_state current_state;
+	unsigned long long div;
+	unsigned long clk_rate;
+	u32 pwm_count = 0;
+	u16 high, low;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	/*
+	 * Configure the pwm repeat count as infinite at (15:0) and leadin
+	 * low time as 0 at (30:16), which is in terms of clock cycles.
+	 */
+	keembay_pwm_update_bits(priv, KMB_PWM_LEADIN_MASK, 0,
+				KMB_PWM_LEADIN_OFFSET(pwm->hwpwm));
+
+	keembay_pwm_get_state(chip, pwm, &current_state);
+
+	if (!state->enabled) {
+		if (current_state.enabled)
+			keembay_pwm_disable(priv, pwm->hwpwm);
+		return 0;
+	}
+
+	/*
+	 * The upper 16 bits and lower 16 bits of the KMB_PWM_HIGHLOW_OFFSET
+	 * register contain the high time and low time of waveform accordingly.
+	 * All the values are in terms of clock cycles.
+	 */
+
+	clk_rate = clk_get_rate(priv->clk);
+	div = clk_rate * state->duty_cycle;
+	div = DIV_ROUND_DOWN_ULL(div, NSEC_PER_SEC);
+	if (div > KMB_PWM_COUNT_MAX)
+		return -ERANGE;
+
+	high = div;
+	div = clk_rate * state->period;
+	div = DIV_ROUND_DOWN_ULL(div, NSEC_PER_SEC);
+	div = div - high;
+	if (div > KMB_PWM_COUNT_MAX)
+		return -ERANGE;
+
+	low = div;
+
+	pwm_count = FIELD_PREP(KMB_PWM_HIGH_MASK, high) |
+		    FIELD_PREP(KMB_PWM_LOW_MASK, low);
+
+	writel(pwm_count, priv->base + KMB_PWM_HIGHLOW_OFFSET(pwm->hwpwm));
+
+	if (state->enabled && !current_state.enabled)
+		keembay_pwm_enable(priv, pwm->hwpwm);
+
+	return 0;
+}
+
+static const struct pwm_ops keembay_pwm_ops = {
+	.owner = THIS_MODULE,
+	.apply = keembay_pwm_apply,
+	.get_state = keembay_pwm_get_state,
+};
+
+static int keembay_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct keembay_pwm *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get clock\n");
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	ret = keembay_clk_enable(dev, priv->clk);
+	if (ret)
+		return ret;
+
+	priv->chip.base = -1;
+	priv->chip.dev = dev;
+	priv->chip.ops = &keembay_pwm_ops;
+	priv->chip.npwm = KMB_TOTAL_PWM_CHANNELS;
+
+	ret = pwmchip_add(&priv->chip);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to add PWM chip\n");
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static int keembay_pwm_remove(struct platform_device *pdev)
+{
+	struct keembay_pwm *priv = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&priv->chip);
+}
+
+static const struct of_device_id keembay_pwm_of_match[] = {
+	{ .compatible = "intel,keembay-pwm" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, keembay_pwm_of_match);
+
+static struct platform_driver keembay_pwm_driver = {
+	.probe	= keembay_pwm_probe,
+	.remove	= keembay_pwm_remove,
+	.driver	= {
+		.name = "pwm-keembay",
+		.of_match_table = keembay_pwm_of_match,
+	},
+};
+module_platform_driver(keembay_pwm_driver);
+
+MODULE_ALIAS("platform:pwm-keembay");
+MODULE_DESCRIPTION("Intel Keem Bay PWM driver");
+MODULE_LICENSE("GPL v2");

drivers/pwm/pwm-lp3943.c

@@ -275,6 +275,7 @@ static int lp3943_pwm_probe(struct platform_device *pdev)
 	lp3943_pwm->chip.dev = &pdev->dev;
 	lp3943_pwm->chip.ops = &lp3943_pwm_ops;
 	lp3943_pwm->chip.npwm = LP3943_NUM_PWMS;
+	lp3943_pwm->chip.base = -1;
 
 	platform_set_drvdata(pdev, lp3943_pwm);
 

drivers/pwm/pwm-lpc18xx-sct.c

@@ -325,7 +325,6 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 {
 	struct lpc18xx_pwm_chip *lpc18xx_pwm;
 	struct pwm_device *pwm;
-	struct resource *res;
 	int ret, i;
 	u64 val;
 
@@ -336,8 +335,7 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 
 	lpc18xx_pwm->dev = &pdev->dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	lpc18xx_pwm->base = devm_ioremap_resource(&pdev->dev, res);
+	lpc18xx_pwm->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(lpc18xx_pwm->base))
 		return PTR_ERR(lpc18xx_pwm->base);
 

drivers/pwm/pwm-lpc32xx.c

@@ -98,7 +98,6 @@ static const struct pwm_ops lpc32xx_pwm_ops = {
 static int lpc32xx_pwm_probe(struct platform_device *pdev)
 {
 	struct lpc32xx_pwm_chip *lpc32xx;
-	struct resource *res;
 	int ret;
 	u32 val;
 
@@ -106,8 +105,7 @@ static int lpc32xx_pwm_probe(struct platform_device *pdev)
 	if (!lpc32xx)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	lpc32xx->base = devm_ioremap_resource(&pdev->dev, res);
+	lpc32xx->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(lpc32xx->base))
 		return PTR_ERR(lpc32xx->base);
 

drivers/pwm/pwm-lpss-platform.c

@@ -58,7 +58,25 @@ static int pwm_lpss_probe_platform(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, lpwm);
 
-	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_SMART_PREPARE);
+	/*
+	 * On Cherry Trail devices the GFX0._PS0 AML checks if the controller
+	 * is on and if it is not on it turns it on and restores what it
+	 * believes is the correct state to the PWM controller.
+	 * Because of this we must disallow direct-complete, which keeps the
+	 * controller (runtime)suspended on resume, to avoid 2 issues:
+	 * 1. The controller getting turned on without the linux-pm code
+	 *    knowing about this. On devices where the controller is unused
+	 *    this causes it to stay on during the next suspend causing high
+	 *    battery drain (because S0i3 is not reached)
+	 * 2. The state restoring code unexpectedly messing with the controller
+	 *
+	 * Leaving the controller runtime-suspended (skipping runtime-resume +
+	 * normal-suspend) during suspend is fine.
+	 */
+	if (info->other_devices_aml_touches_pwm_regs)
+		dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE|
+						    DPM_FLAG_SMART_SUSPEND);
+
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
@@ -73,24 +91,6 @@ static int pwm_lpss_remove_platform(struct platform_device *pdev)
 	return pwm_lpss_remove(lpwm);
 }
 
-static int pwm_lpss_prepare(struct device *dev)
-{
-	struct pwm_lpss_chip *lpwm = dev_get_drvdata(dev);
-
-	/*
-	 * If other device's AML code touches the PWM regs on suspend/resume
-	 * force runtime-resume the PWM controller to allow this.
-	 */
-	if (lpwm->info->other_devices_aml_touches_pwm_regs)
-		return 0; /* Force runtime-resume */
-
-	return 1; /* If runtime-suspended leave as is */
-}
-
-static const struct dev_pm_ops pwm_lpss_platform_pm_ops = {
-	.prepare = pwm_lpss_prepare,
-};
-
 static const struct acpi_device_id pwm_lpss_acpi_match[] = {
 	{ "80860F09", (unsigned long)&pwm_lpss_byt_info },
 	{ "80862288", (unsigned long)&pwm_lpss_bsw_info },
@@ -104,7 +104,6 @@ static struct platform_driver pwm_lpss_driver_platform = {
 	.driver = {
 		.name = "pwm-lpss",
 		.acpi_match_table = pwm_lpss_acpi_match,
-		.pm = &pwm_lpss_platform_pm_ops,
 	},
 	.probe = pwm_lpss_probe_platform,
 	.remove = pwm_lpss_remove_platform,

drivers/pwm/pwm-lpss.c

@@ -76,7 +76,12 @@ static int pwm_lpss_wait_for_update(struct pwm_device *pwm)
 
 static inline int pwm_lpss_is_updating(struct pwm_device *pwm)
 {
-	return (pwm_lpss_read(pwm) & PWM_SW_UPDATE) ? -EBUSY : 0;
+	if (pwm_lpss_read(pwm) & PWM_SW_UPDATE) {
+		dev_err(pwm->chip->dev, "PWM_SW_UPDATE is still set, skipping update\n");
+		return -EBUSY;
+	}
+
+	return 0;
 }
 
 static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,

drivers/pwm/pwm-mediatek.c

@@ -30,12 +30,14 @@
 #define PWM45DWIDTH_FIXUP	0x30
 #define PWMTHRES		0x30
 #define PWM45THRES_FIXUP	0x34
+#define PWM_CK_26M_SEL		0x210
 
 #define PWM_CLK_DIV_MAX		7
 
 struct pwm_mediatek_of_data {
 	unsigned int num_pwms;
 	bool pwm45_fixup;
+	bool has_ck_26m_sel;
 };
 
 /**
@@ -132,6 +134,10 @@ static int pwm_mediatek_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (ret < 0)
 		return ret;
 
+	/* Make sure we use the bus clock and not the 26MHz clock */
+	if (pc->soc->has_ck_26m_sel)
+		writel(0, pc->regs + PWM_CK_26M_SEL);
+
 	/* Using resolution in picosecond gets accuracy higher */
 	resolution = (u64)NSEC_PER_SEC * 1000;
 	do_div(resolution, clk_get_rate(pc->clk_pwms[pwm->hwpwm]));
@@ -208,7 +214,6 @@ static const struct pwm_ops pwm_mediatek_ops = {
 static int pwm_mediatek_probe(struct platform_device *pdev)
 {
 	struct pwm_mediatek_chip *pc;
-	struct resource *res;
 	unsigned int i;
 	int ret;
 
@@ -218,8 +223,7 @@ static int pwm_mediatek_probe(struct platform_device *pdev)
 
 	pc->soc = of_device_get_match_data(&pdev->dev);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pc->regs = devm_ioremap_resource(&pdev->dev, res);
+	pc->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pc->regs))
 		return PTR_ERR(pc->regs);
 
@@ -281,31 +285,43 @@ static int pwm_mediatek_remove(struct platform_device *pdev)
 static const struct pwm_mediatek_of_data mt2712_pwm_data = {
 	.num_pwms = 8,
 	.pwm45_fixup = false,
+	.has_ck_26m_sel = false,
 };
 
 static const struct pwm_mediatek_of_data mt7622_pwm_data = {
 	.num_pwms = 6,
 	.pwm45_fixup = false,
+	.has_ck_26m_sel = false,
 };
 
 static const struct pwm_mediatek_of_data mt7623_pwm_data = {
 	.num_pwms = 5,
 	.pwm45_fixup = true,
+	.has_ck_26m_sel = false,
 };
 
 static const struct pwm_mediatek_of_data mt7628_pwm_data = {
 	.num_pwms = 4,
 	.pwm45_fixup = true,
+	.has_ck_26m_sel = false,
 };
 
 static const struct pwm_mediatek_of_data mt7629_pwm_data = {
 	.num_pwms = 1,
 	.pwm45_fixup = false,
+	.has_ck_26m_sel = false,
+};
+
+static const struct pwm_mediatek_of_data mt8183_pwm_data = {
+	.num_pwms = 4,
+	.pwm45_fixup = false,
+	.has_ck_26m_sel = true,
 };
 
 static const struct pwm_mediatek_of_data mt8516_pwm_data = {
 	.num_pwms = 5,
 	.pwm45_fixup = false,
+	.has_ck_26m_sel = true,
 };
 
 static const struct of_device_id pwm_mediatek_of_match[] = {
@@ -314,6 +330,7 @@ static const struct of_device_id pwm_mediatek_of_match[] = {
 	{ .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data },
 	{ .compatible = "mediatek,mt7628-pwm", .data = &mt7628_pwm_data },
 	{ .compatible = "mediatek,mt7629-pwm", .data = &mt7629_pwm_data },
+	{ .compatible = "mediatek,mt8183-pwm", .data = &mt8183_pwm_data },
 	{ .compatible = "mediatek,mt8516-pwm", .data = &mt8516_pwm_data },
 	{ },
 };

drivers/pwm/pwm-meson.c

@@ -537,15 +537,13 @@ static int meson_pwm_init_channels(struct meson_pwm *meson)
 static int meson_pwm_probe(struct platform_device *pdev)
 {
 	struct meson_pwm *meson;
-	struct resource *regs;
 	int err;
 
 	meson = devm_kzalloc(&pdev->dev, sizeof(*meson), GFP_KERNEL);
 	if (!meson)
 		return -ENOMEM;
 
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	meson->base = devm_ioremap_resource(&pdev->dev, regs);
+	meson->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(meson->base))
 		return PTR_ERR(meson->base);
 

drivers/pwm/pwm-mtk-disp.c

@@ -172,7 +172,6 @@ static const struct pwm_ops mtk_disp_pwm_ops = {
 static int mtk_disp_pwm_probe(struct platform_device *pdev)
 {
 	struct mtk_disp_pwm *mdp;
-	struct resource *r;
 	int ret;
 
 	mdp = devm_kzalloc(&pdev->dev, sizeof(*mdp), GFP_KERNEL);
@@ -181,8 +180,7 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
 
 	mdp->data = of_device_get_match_data(&pdev->dev);
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	mdp->base = devm_ioremap_resource(&pdev->dev, r);
+	mdp->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(mdp->base))
 		return PTR_ERR(mdp->base);
 

drivers/pwm/pwm-pxa.c

@@ -166,7 +166,6 @@ static int pwm_probe(struct platform_device *pdev)
 {
 	const struct platform_device_id *id = platform_get_device_id(pdev);
 	struct pxa_pwm_chip *pwm;
-	struct resource *r;
 	int ret = 0;
 
 	if (IS_ENABLED(CONFIG_OF) && id == NULL)
@@ -193,8 +192,7 @@ static int pwm_probe(struct platform_device *pdev)
 		pwm->chip.of_pwm_n_cells = 1;
 	}
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	pwm->mmio_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pwm->mmio_base))
 		return PTR_ERR(pwm->mmio_base);
 

drivers/pwm/pwm-rcar.c

@@ -168,7 +168,7 @@ static int rcar_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	/* This HW/driver only supports normal polarity */
 	if (state->polarity != PWM_POLARITY_NORMAL)
-		return -ENOTSUPP;
+		return -EINVAL;
 
 	if (!state->enabled) {
 		rcar_pwm_disable(rp);
@@ -204,15 +204,13 @@ static const struct pwm_ops rcar_pwm_ops = {
 static int rcar_pwm_probe(struct platform_device *pdev)
 {
 	struct rcar_pwm_chip *rcar_pwm;
-	struct resource *res;
 	int ret;
 
 	rcar_pwm = devm_kzalloc(&pdev->dev, sizeof(*rcar_pwm), GFP_KERNEL);
 	if (rcar_pwm == NULL)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	rcar_pwm->base = devm_ioremap_resource(&pdev->dev, res);
+	rcar_pwm->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(rcar_pwm->base))
 		return PTR_ERR(rcar_pwm->base);
 

drivers/pwm/pwm-renesas-tpu.c

@@ -383,7 +383,6 @@ static const struct pwm_ops tpu_pwm_ops = {
 static int tpu_probe(struct platform_device *pdev)
 {
 	struct tpu_device *tpu;
-	struct resource *res;
 	int ret;
 
 	tpu = devm_kzalloc(&pdev->dev, sizeof(*tpu), GFP_KERNEL);
@@ -394,8 +393,7 @@ static int tpu_probe(struct platform_device *pdev)
 	tpu->pdev = pdev;
 
 	/* Map memory, get clock and pin control. */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	tpu->base = devm_ioremap_resource(&pdev->dev, res);
+	tpu->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(tpu->base))
 		return PTR_ERR(tpu->base);
 

drivers/pwm/pwm-rockchip.c

@@ -287,7 +287,6 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *id;
 	struct rockchip_pwm_chip *pc;
-	struct resource *r;
 	u32 enable_conf, ctrl;
 	int ret, count;
 
@@ -299,8 +298,7 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 	if (!pc)
 		return -ENOMEM;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pc->base = devm_ioremap_resource(&pdev->dev, r);
+	pc->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pc->base))
 		return PTR_ERR(pc->base);
 

drivers/pwm/pwm-samsung.c

@@ -510,7 +510,6 @@ static int pwm_samsung_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct samsung_pwm_chip *chip;
-	struct resource *res;
 	unsigned int chan;
 	int ret;
 
@@ -541,8 +540,7 @@ static int pwm_samsung_probe(struct platform_device *pdev)
 							sizeof(chip->variant));
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	chip->base = devm_ioremap_resource(&pdev->dev, res);
+	chip->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(chip->base))
 		return PTR_ERR(chip->base);
 

drivers/pwm/pwm-sifive.c

@@ -232,7 +232,6 @@ static int pwm_sifive_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct pwm_sifive_ddata *ddata;
 	struct pwm_chip *chip;
-	struct resource *res;
 	int ret;
 
 	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
@@ -248,8 +247,7 @@ static int pwm_sifive_probe(struct platform_device *pdev)
 	chip->base = -1;
 	chip->npwm = 4;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ddata->regs = devm_ioremap_resource(dev, res);
+	ddata->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(ddata->regs))
 		return PTR_ERR(ddata->regs);
 

drivers/pwm/pwm-sl28cpld.c

@@ -232,6 +232,8 @@ static int sl28cpld_pwm_probe(struct platform_device *pdev)
 	chip->base = -1;
 	chip->npwm = 1;
 
+	platform_set_drvdata(pdev, priv);
+
 	ret = pwmchip_add(&priv->pwm_chip);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add PWM chip (%pe)",
@@ -239,8 +241,6 @@ static int sl28cpld_pwm_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	platform_set_drvdata(pdev, priv);
-
 	return 0;
 }
 

drivers/pwm/pwm-spear.c

@@ -174,7 +174,6 @@ static int spear_pwm_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct spear_pwm_chip *pc;
-	struct resource *r;
 	int ret;
 	u32 val;
 
@@ -182,8 +181,7 @@ static int spear_pwm_probe(struct platform_device *pdev)
 	if (!pc)
 		return -ENOMEM;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	pc->mmio_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pc->mmio_base))
 		return PTR_ERR(pc->mmio_base);
 

drivers/pwm/pwm-sti.c

@@ -505,7 +505,6 @@ static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
 	if (IS_ERR(pc->prescale_high))
 		return PTR_ERR(pc->prescale_high);
 
-
 	pc->pwm_out_en = devm_regmap_field_alloc(dev, pc->regmap,
 						 reg_fields[PWM_OUT_EN]);
 	if (IS_ERR(pc->pwm_out_en))
@@ -540,7 +539,6 @@ static int sti_pwm_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct sti_pwm_compat_data *cdata;
 	struct sti_pwm_chip *pc;
-	struct resource *res;
 	unsigned int i;
 	int irq, ret;
 
@@ -552,9 +550,7 @@ static int sti_pwm_probe(struct platform_device *pdev)
 	if (!cdata)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	pc->mmio = devm_ioremap_resource(dev, res);
+	pc->mmio = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pc->mmio))
 		return PTR_ERR(pc->mmio);
 
@@ -593,38 +589,34 @@ static int sti_pwm_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	if (!cdata->pwm_num_devs)
-		goto skip_pwm;
-
-	pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm");
-	if (IS_ERR(pc->pwm_clk)) {
-		dev_err(dev, "failed to get PWM clock\n");
-		return PTR_ERR(pc->pwm_clk);
-	}
+	if (cdata->pwm_num_devs) {
+		pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm");
+		if (IS_ERR(pc->pwm_clk)) {
+			dev_err(dev, "failed to get PWM clock\n");
+			return PTR_ERR(pc->pwm_clk);
+		}
 
-	ret = clk_prepare(pc->pwm_clk);
-	if (ret) {
-		dev_err(dev, "failed to prepare clock\n");
-		return ret;
+		ret = clk_prepare(pc->pwm_clk);
+		if (ret) {
+			dev_err(dev, "failed to prepare clock\n");
+			return ret;
+		}
 	}
 
-skip_pwm:
-	if (!cdata->cpt_num_devs)
-		goto skip_cpt;
-
-	pc->cpt_clk = of_clk_get_by_name(dev->of_node, "capture");
-	if (IS_ERR(pc->cpt_clk)) {
-		dev_err(dev, "failed to get PWM capture clock\n");
-		return PTR_ERR(pc->cpt_clk);
-	}
+	if (cdata->cpt_num_devs) {
+		pc->cpt_clk = of_clk_get_by_name(dev->of_node, "capture");
+		if (IS_ERR(pc->cpt_clk)) {
+			dev_err(dev, "failed to get PWM capture clock\n");
+			return PTR_ERR(pc->cpt_clk);
+		}
 
-	ret = clk_prepare(pc->cpt_clk);
-	if (ret) {
-		dev_err(dev, "failed to prepare clock\n");
-		return ret;
+		ret = clk_prepare(pc->cpt_clk);
+		if (ret) {
+			dev_err(dev, "failed to prepare clock\n");
+			return ret;
+		}
 	}
 
-skip_cpt:
 	pc->chip.dev = dev;
 	pc->chip.ops = &sti_pwm_ops;
 	pc->chip.base = -1;

drivers/pwm/pwm-sun4i.c

@@ -294,12 +294,8 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	ctrl |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
 
-	if (state->enabled) {
+	if (state->enabled)
 		ctrl |= BIT_CH(PWM_EN, pwm->hwpwm);
-	} else {
-		ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm);
-		ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-	}
 
 	sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
 
@@ -395,7 +391,6 @@ MODULE_DEVICE_TABLE(of, sun4i_pwm_dt_ids);
 static int sun4i_pwm_probe(struct platform_device *pdev)
 {
 	struct sun4i_pwm_chip *pwm;
-	struct resource *res;
 	int ret;
 
 	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
@@ -406,8 +401,7 @@ static int sun4i_pwm_probe(struct platform_device *pdev)
 	if (!pwm->data)
 		return -ENODEV;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pwm->base = devm_ioremap_resource(&pdev->dev, res);
+	pwm->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pwm->base))
 		return PTR_ERR(pwm->base);
 

drivers/pwm/pwm-tegra.c

@@ -237,7 +237,6 @@ static const struct pwm_ops tegra_pwm_ops = {
 static int tegra_pwm_probe(struct platform_device *pdev)
 {
 	struct tegra_pwm_chip *pwm;
-	struct resource *r;
 	int ret;
 
 	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
@@ -247,8 +246,7 @@ static int tegra_pwm_probe(struct platform_device *pdev)
 	pwm->soc = of_device_get_match_data(&pdev->dev);
 	pwm->dev = &pdev->dev;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pwm->regs = devm_ioremap_resource(&pdev->dev, r);
+	pwm->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pwm->regs))
 		return PTR_ERR(pwm->regs);
 

drivers/pwm/pwm-tiecap.c

@@ -196,7 +196,6 @@ static int ecap_pwm_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct ecap_pwm_chip *pc;
-	struct resource *r;
 	struct clk *clk;
 	int ret;
 
@@ -230,8 +229,7 @@ static int ecap_pwm_probe(struct platform_device *pdev)
 	pc->chip.base = -1;
 	pc->chip.npwm = 1;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	pc->mmio_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pc->mmio_base))
 		return PTR_ERR(pc->mmio_base);
 

drivers/pwm/pwm-tiehrpwm.c

@@ -421,7 +421,6 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct ehrpwm_pwm_chip *pc;
-	struct resource *r;
 	struct clk *clk;
 	int ret;
 
@@ -437,10 +436,8 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "failed to get clock\n");
-		return PTR_ERR(clk);
-	}
+	if (IS_ERR(clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(clk), "Failed to get fck\n");
 
 	pc->clk_rate = clk_get_rate(clk);
 	if (!pc->clk_rate) {
@@ -455,17 +452,14 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev)
 	pc->chip.base = -1;
 	pc->chip.npwm = NUM_PWM_CHANNEL;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	pc->mmio_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pc->mmio_base))
 		return PTR_ERR(pc->mmio_base);
 
 	/* Acquire tbclk for Time Base EHRPWM submodule */
 	pc->tbclk = devm_clk_get(&pdev->dev, "tbclk");
-	if (IS_ERR(pc->tbclk)) {
-		dev_err(&pdev->dev, "Failed to get tbclk\n");
-		return PTR_ERR(pc->tbclk);
-	}
+	if (IS_ERR(pc->tbclk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pc->tbclk), "Failed to get tbclk\n");
 
 	ret = clk_prepare(pc->tbclk);
 	if (ret < 0) {

drivers/pwm/pwm-vt8500.c

@@ -193,7 +193,6 @@ MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);
 static int vt8500_pwm_probe(struct platform_device *pdev)
 {
 	struct vt8500_chip *chip;
-	struct resource *r;
 	struct device_node *np = pdev->dev.of_node;
 	int ret;
 
@@ -219,8 +218,7 @@ static int vt8500_pwm_probe(struct platform_device *pdev)
 		return PTR_ERR(chip->clk);
 	}
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	chip->base = devm_ioremap_resource(&pdev->dev, r);
+	chip->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(chip->base))
 		return PTR_ERR(chip->base);
 

drivers/pwm/pwm-zx.c

@@ -196,7 +196,6 @@ static const struct pwm_ops zx_pwm_ops = {
 static int zx_pwm_probe(struct platform_device *pdev)
 {
 	struct zx_pwm_chip *zpc;
-	struct resource *res;
 	unsigned int i;
 	int ret;
 
@@ -204,8 +203,7 @@ static int zx_pwm_probe(struct platform_device *pdev)
 	if (!zpc)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	zpc->base = devm_ioremap_resource(&pdev->dev, res);
+	zpc->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(zpc->base))
 		return PTR_ERR(zpc->base);
 
@@ -238,6 +236,7 @@ static int zx_pwm_probe(struct platform_device *pdev)
 	ret = pwmchip_add(&zpc->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+		clk_disable_unprepare(zpc->pclk);
 		return ret;
 	}
 

include/linux/pwm.h

@@ -473,11 +473,6 @@ static inline int pwmchip_add(struct pwm_chip *chip)
 	return -EINVAL;
 }
 
-static inline int pwmchip_add_inversed(struct pwm_chip *chip)
-{
-	return -EINVAL;
-}
-
 static inline int pwmchip_remove(struct pwm_chip *chip)
 {
 	return -EINVAL;